Update failure in lenovo tab a5500 a8

my tab ask me to update my firmware
and when i accept to download and update these update
it failed
then my tab never open after that
what can i do
did i lost my official software
please help me

I have the same problem.
Tried to do the update on a device solo, and it failed.
I than tried to do the update through Lenovo Smart Assistant. It recognized that there is newer version of firmware, gave me a choice to update from A5500HV_A442_000_024_141007_ROW to A5500HV_A442_000_029_150401_ROW that had 139,80mb.
I downloaded the package and it transfered it to the tablet, notified me that the update is starting and the tablet shut down.
After reboot it said installing system updates and on about 1/4 of the update bar error! occured.
In the description of error it than said "/system/etc/apns-conf.xml" has unexpected contents. - Update zip is not correct - Installation aborted.
It ofers me to apply update form adb, sdcard and cache but I dont know what any of this means
I reboot the system and it works on old firmware normaly.
So is there a solution to that or should we just ignore the update?
Thank you.

Similar Messages

Lenovo Tab S8-50F will not update ota

I recieved a new update for my lenovo tab s8-50f, and whenever i try to update, it gives me an error screen
Finding update package.....
Opening update package.....
Verifying update package......
Installing update....
Verifying current system.....
assert failed: apply_patch_check("/system/app/AnyShare_ROW.odex", "55fccc4b5d8f37855f34c55417f47122bd46a27c" , "9780dd9540fe10726655e42bb3b968a65ee48e3b")
E: Error in /data/media/0/lenovoota/S8-50F_S000164_141103_ROW_TO_S8-50F_S000185_141203_ROW.zip
(Satus 7)
E: Install of data/media/0/lenovoota/S8-50F_S000164_141103_ROW_TO_S8-50F_S000185_141203_ROW.zip
failed with status 1
Installation Aborted.
E: Installation failed with status 1
Any idea on a way to fix this. looks like its lenovo fault. The tab s8 is a very buggy tablet. lots of glitches. Werid ticking noises from speakers when tab is locked. Screen wouldnt turn on. doesnt update. overheats.tablet came with a dead or "stuck" pixel.

abubatatachick wrote:
i uninstalled lenovos system apps. share it, sync it, clone it, security hd. and i did root
Well...That's why the update failed to install.If you root the device and uninstall pre-installed system apps(those that you can't normally uninstall) OTA updating stops working.
Try to perform a factory reset (in the hope it will restore those apps...slim chance but worth a try).
If that dosen't work the only way you will be able to OTA update (and,no...manually downloading the update>installing it from recovery also won't work) is to completely reflash the stock firmware(on your own risk).
Unfortunately you'll have to find out how to do that on your own.Sorry
PS:Generally speaking it's better to ''hibernate''(after rooting) not uninstall if you want to OTA update in the future.
*Rooting your device voids your warranty
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

LENOVO TAB 2 A10-70 lollipop issues report everybody.

Recently lenovo give the lollipop update to the LENOVO TAB 2 A10-70,but everybody has reporting serious bug's in this tablet after made the update,please can you put all your issues related with lollipop?Lenovo is not interested in bring a bug's fix for this tablet?

Omg, where do I begin? First of all I can't even bring up the **bleep** keyboard to type this response. I'm using the tablet right now to type this message in another application so I can cut and paste. Lenovo Tab 2 A7-10F Android 5.01 Lollipop ROM bugs: 1. Update initially soft bricked the tablet at boot. (Hard Reset required (Power button + Volume Down boots into recovery mode) [Fixed issue] 2. Dolby sound was VERY low. (Wiped all Dolby app data) [Fixed issue] 3. Poor Wi-Fi reception & range. (Seriously you have to be right next to the **bleep** source of the Wi-Fi signal or else it's slow as F****. [Unresolved issue] 4. Bluetooth connection issues. Paired devices take forever to sync, I have to reboot the tablet and reboot the Bluetooth device or Remove the device and Pair it again from scratch. [Unresolved Issue] 5. In portrait mode regardless of the application in use the front facing camera, if oriented on the right hand, side turns the screen off briefly several times until you rotate the screen into landscape then it stops. I can't begin to tell you how F**** annoying this is and it happens often. This tablet does not have a proximity sensor and I theorize is using the crappy camera adhoc to shut the screen off. [Unresolved issue] Looking back I should have purchased a Nexus 9. I wasted more time and gray hair than I expected and still have issues unresolved. I will never purchase another Lenovo Tablet.

US version Lenovo Tab 2 (A7-30F) Not receiving updates. - Make offline downloads available?

I decided it might be best to open a new thread about this issue, since I don't necessarily believe attention is being given to similar threads once marked as "solved." I am a fairly new owner of the A7-30F model Lenovo Tab 2, and it appears that the touchscreen has some kind of software feature, perhaps to prevent "accidental" touches, that makes it respond poorly to user touch input. I know it's not a hardware problem, because when I use the Lenovo companion app to test touch and multi-touch functionality, the touchscreen appears to be much more responsive during diagnostics, but the user interface of that same diagnostics app seems plagued by the same touch resistance. I have read elsewhere on the forum that a software patch has been made available OTA, that resolves the touch issues, but My tablet does not seem to be able to find said update, indicating that I'm already on the latest version every time I check the Software Updater. I even wiped the cache and data from the software updater application, and it still thinks I have the latest software. My question is this. Is there a staggered rollout of these updates, and are they based on geographic constraints? Even if I'm not yet to get the lollipop update, is there a reason the A7-30F_S000027_150624_ROW can't be made available via the downloads area so that it can be applied from local media via the updater app? Can the US version Lollipop update be made available for use with the updater app as well? This should benefit all customers, because it also provides a go-back point in case someone were to upgrade their device to Android 5.x but not like the changes from 4.4.2. Is it safe to assume with 5.x updates being staged and released, that I'm never going to see that 150624 build?

Helloooooo? I this thing on? It's been 4 days since I posed this question. Any chance of getting an official response?

Lenovo tab S8-50 fails to update: S8-50F_s000214_150629_ROW

Lenovo tab S8-50 fails to update: S8-50F_s000214_150629_ROW. Pic below shows the results. The first 1 is from Smart Assistent, the 2nd ons is manually finding the update.zip but yeah...

Settler11 wrote:
Just follow this tutorial. It's simple. But just to let you know, the 12mb update isn't worth it. http://forum.xda-developers.com/showpost.php?p=58934356&postcount=90 Is good know it. Thx

Do you recomended a lollipop update to LENOVO TAB 2 A10-70?

I found some many complaints about that updated, please lenovo what happened ???I just buy a LENOVO TAB 2 A10-70 today and have some many bugs with the Dolby app,WiFi,......I just wait to see if lenovo is working on any update,I have 15 days to return this tablet....please this tablet is great.... Not leave alone lenovo

I figured that I'd give the update a try and if it didn't work out then I'd return it and buy another to keep KitKat... I'm happy to say that the upgrade to Lollipop went smoothly and everything appears to be working correctly - no issues with WiFi, audio, battery life or anything else that I can observe. I initially thought that web browsing performance was a bit slower, but after some more use I now think it is at least equal if not better than KitKat. I don't bother with benchmarks, for me it either feels good or it doesn't. I upgraded my tablet shortly after receiving it, so I had not installed many apps before upgrading to Lollipop and the tablet was fairly clean. The upgrade went very smoothly, taking about 15 minutes to install. I received the architectural error others have mentioned after the primary upgrade, but ignored it and continued to install the last update that followed. The last update suggested performing a factory reset which I did, and when the tablet rebooted all errors were gone. All in all it was a painless experience and I am satisfied with the result. I think two factors might be causing others some trouble... I personally would start with a clean tablet, so if you have installed many apps I would perform a factory reset both before and after the Lollipop update. My screen never went black for long, but in any event once the update starts you should just leave the tablet alone until it completes. I set the sleep timer to max so it wouldn't power down while the update is in process. Curiously, the major update to 5.01 Lollipop was identified by Lenovo as simply bug and stability fixes (but 1300+ MB), while the last patch with bug fixes had much more verbage and warned of data being deleted, and also mentioned performing the factory reset... Lenovo should improve their changelog notes for these patches because the biggest one doesn't very clearly state it is upgrading to Lollipop. Anyway, its cool that Lenovo keeps updating the tablet, Asus never provided any updates to my old Memo Pad FHD10. The Tab 2 A10 is a great deal and I'm very happy with it.

How to Root a Lenovo Tab 2 A10-70 2015 version

I am not responsible for any damage that may affect your Device! Rooting is the first step to customise your device. Without rooting absolutely 'extraordinary' nothing is possible. Yes your warranty becomes void after that. So chill. No matter where you read that its very risky or something like that, I'll say refrain from going to those sites. They are just putting unnecessary fear into your mind. Most probably they fear You could make your device function better than them.So lets go on with it. I've made it simple for you. Just follow the steps. Step 1: Download and install Kingo Android Root. (THE LAST VERSION)Step 2: Double click the desktop icon of Kingo Android Root and launch it.Step 3: Plug your Android device into your computer via USB cable.Step 4: Enable USB Debugging mode on your Android device.USB Debugging mode enabled is a necessary step of Android rooting process.*INPORTANT: Pay attention to your device screen for a prompt window. Tick "Always allow from this computer". If you don't, you will probably get yourself an OFFLINE DEVICE.5. Read notifications carefully before rooting your device.6. Click "ROOT" to root your device.Kingo Android Root will employ multiple exploits on your device, which will probably take a couple of minutes. In the rooting process, your device may be rebooted several times. Do not be panic, it is perfectly normal. And once it begins, please DO NOT touch, move, unplug or perform any operation on your device.7. Root succeeded, click "Finish" to reboot your device.8. Check the root status of your device.9-Enjoy your Root in your new Lenovo Tab 2 A10 *Android rooting is a modification process to the original system, in which the limitations are removed and full-access is allowed and thus resulting in the ability to alter or replace system applications and settings, run specialized apps and even facilitate the removal and replacement of the device's operating system with a custom one. Rooting your device will immediately void your warranty...

I was able to root it using Kingoroot, but it needed some help! Kingo said the root was successful, but the tablet was not really rooted. Some apps, like Greenify, would not work correctly. I unrooted, then rerooted with the same result. The last time I did this, the Kingo Superuser app said it needed an update to its binary. Instead of updating it, I installed Super SU 2.46 and then had it update its binary. After a restart, I was fully rooted. I have not removed the Kingo Superuser app or updated Super SU. If it is not broken, do not fix it! ;p). I also was interested in installing Xposed, but at the start of the installation, it warned me that the app was not compatible with some of the tablets hardware (processor or chipset?), so I removed the installer. I would not install it until Xposed is updated. The only other thing I would like to do is install Clockwork Mod recovery, but I am not sure if it is compatible with the Tab 2.

Adobe Acrobat 9.3.4 Update failure- "Error Applying Transforms, verify that the specified...

I have ignored this issue for long enough. I have Adobe CS4, with Acrobat Pro version 9.3.4. Windows 7. Acrobat updater pops up on my machine, and when I execute the update requested, the updater gives me the update failure message, with code 1604, "error applying transforms."
I have seen solutions posted for this tranforms message, but it was a problem with Acrobat 8. I have seen no solutions as of yet for Acrobat 9, so I thought I would post.
I also tried opening Acrobat 9 Pro, and under the help tab, I initiated "repair". I get the same transform error message as above. Any advice anyone? Should I just uninstall Acrobat 9 Pro and reinstall using my CS4 disk?
Thanks for the help!

If you have original CD with Acrobat installation, copy all files with extension .mst from this CD to the following location:
C:\Program Files (x86)\Adobe\Acrobat 9.0\Setup Files\[ProductCode] if this is 64bit system
or
C:\Program Files\Acrobat 9.0\Setup Files\[ProductCode] if this is 32bit system
where [ProductCode] is a unique value which identifies your language version of Acrobat 9 Pro.
If this is EFG version, it should be {AC76BA86-1033-F400-7760-000000000004}
If location does not exist, create it.
2. If you do not have original CD and cannot find .mst files, provide the exact Product name including language and I will provide further instructions.
Good luck

Think Vantage Update Failure to Install

Are you experiencing "n Packages did not install" messages from Think Vantage System Update after
it has completed updating your system with Microsoft Vista Update Modules (KB XXXXXX)?
This has occurred more than three times after having installed Vista SP1. It is troubling because it seems that System Update is failing to install necessary KB updates.
The most recent failure followed an attempt to install three Update Modules. I checked them out and found that they were pre-SP1 hot fixes. For example, KB 932063 was a hot fix that Microsoft issued to fix five wireless issues in the pre-SP1 environment.
This practice by Lenovo raises two questions:
Why is Lenovo promulgating pre-SP1 hot fixes in a post-SP1 environment without giving notice to uses that the updates are not appropriate for SP-1 machines?
Why does Lenovo promulgate for general installation hot fixes that Microsoft recommends be installed only upon the occurrence of certain symptoms?
After the first occurrence of this type of System Update failure I phoned technical support. The technician told me that I had to call the pay-per-visit support line. When I told him that this was a new practice that was instituted after the particular Think Pad (a T60) was purchased, he argued with me.
These practices are Lenovo management issues. They should be remedied at once.
slcastner

I've had the same problem with trying to install SP1. Any 'pre-sp1' hot fixes are included in SP1 anyway, so I don't know why SP1 won't install. I have also tried to update some intel drivers and they failed, and the message said to contact my system manufacturer for the appropriate update. It's a tough way to do business.
--Jim

No network settings mode on my A3300 lenovo tab

tiada tetapan network mode di tab lenovo A3300 saya...
No network settings mode on my A3300 lenovo tab
Moderator note:Moved from http://forums.lenovo.com/t5/A-and-P-Series/a328-no-data-connection/td-p/1799637
New thread created.Edited/Translation provided by Google Translate

Try temporarily turning off all your firewall and antivirus software until the download has completed.
An alternative is to try downloading the update via a browser : https://discussions.apple.com/message/16703914#16703914

Suggestions for sturdiest cases for Lenovo Tab 2 A10 tablet?

Hi, I'm thinking of buying a Lenovo Tab 2 A10 tablet and I'm also looking to get a sturdy case to put it in. The sturdier case (like military grade even) the better. I looked up many sites that all show cases for the Galaxy Tab 2. It looks pretty much the same in size, but I could make out judging only by the photos if all the port holes were also compatible with the Lenovo tablet. I'll also contact Lenovo customer support to see if the recommend a list of cases, but right now I was wandering if anyone knows/owns of a sturdy case that could do the trick. thanks.

Omg, where do I begin? First of all I can't even bring up the **bleep** keyboard to type this response. I'm using the tablet right now to type this message in another application so I can cut and paste. Lenovo Tab 2 A7-10F Android 5.01 Lollipop ROM bugs: 1. Update initially soft bricked the tablet at boot. (Hard Reset required (Power button + Volume Down boots into recovery mode) [Fixed issue] 2. Dolby sound was VERY low. (Wiped all Dolby app data) [Fixed issue] 3. Poor Wi-Fi reception & range. (Seriously you have to be right next to the **bleep** source of the Wi-Fi signal or else it's slow as F****. [Unresolved issue] 4. Bluetooth connection issues. Paired devices take forever to sync, I have to reboot the tablet and reboot the Bluetooth device or Remove the device and Pair it again from scratch. [Unresolved Issue] 5. In portrait mode regardless of the application in use the front facing camera, if oriented on the right hand, side turns the screen off briefly several times until you rotate the screen into landscape then it stops. I can't begin to tell you how F**** annoying this is and it happens often. This tablet does not have a proximity sensor and I theorize is using the crappy camera adhoc to shut the screen off. [Unresolved issue] Looking back I should have purchased a Nexus 9. I wasted more time and gray hair than I expected and still have issues unresolved. I will never purchase another Lenovo Tablet.

Lenovo tab A7-40 Rubbish bin dissapeard

I just got brand new Lenovo tab A7-40 with Android 4.2.2. When I brought it home all was fine, then when I connected tab to the WI-FI an update appeard and after applaying the update- the RUBBISH ICON is gone. I went to the shop and got another tablet as replacement. Came home all was fine..... until same update done same thing. Factory reset does not help.
Do you know what is wrong?
please help
Solved!
Go to Solution.

Unfortunately your video is private....I can't watch it.
That being said...There's nothing wrong with your tablet,just got updated to Android 4.4 and Lenovo's Android 4.4 new UI=User Interface(you were running Android 4.2 before).
On the old 4.2 UI to remove/uninstall an app you had to long press on the app's icon and drag it to that RUBBISH ICON.
Now on the new UI(and on Android 4.4 devices in general) things are a lot simpler: Just long press on the desired app icon and then press the ''X'' situated on the upper left side of the icon.....That's it....No more ''RUBBISH ICON'' on Android 4.4 KitKat.
Hope this helps.
Cheers.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Does anyone know how to solve: "Firmware update failure. Disk write error"?

Hi all,
Here is the list of all what went wrong and where I am now:
1. My Ipod worked well
2. I wanted to update it, you know, the normal thing with Itunes
3. Every time I tried, my computer froze. I was unable to add only one song (both automatically and manually).
4. I took my external drive (where my music is) at work and tried again: same result.
5. I decided to run the Updater I have on the CD that came with the Ipod.(2005-02-07; I usually avoid the newer version, having had once a problem when putting a newer version of Updater).
6. The Updater was unable to operate any action on my Ipode (I don't remember the messages now).
7. Like I tried what I describe here above like a hundred time. I decided to format the Ipod with Windows (My Computer, right click on the Ipod, format).
8. It did and now I have only the famous folder with an exclamation mark on my Ipod.
9. Now when I am running the Updater, it says it cannot Restore the factory settings giving this message "Firmware update failure. Disk write error".
I would appreciate any help because, during the last 2 hours, I read and tried all I found on the Support Help here on the Apple web side without any result yet.
Thank a lot for your answer

Hi Cyrille,
Have you looked at Knowledge Base Document #301267 on "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod?
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

RMMR1MRS-When run in background cause update failure errors looking

hi,
RMMR1MRS report when run in background cause update failure errors .
There are few below reason for the error log.
1. for the PO invoice already generated - (its right if already invoice generated. should not happen again)
2. In MIGO, entire quantity has been reversed and also invoice generated with zero value - ( its right , should not happen invoice again )
3. Particular PO line item deleted - (its right if the PO line item deleted. ERS settlement not require)
For the all above reason, the update error occurs. But the mean time the program "RMMR1MRS" should not through the update error log.
Note: The job was not terminated due to this update error and also no harm because of the error log
can you please help on this update failure why it occurs.

Have you found a solution already? If so, please, share it with the community and close this thread.

"firmware update failure. disk write error."

i get this when i use the ipod Updater after clicking "restore"... this thing is giving me a headache. Also get the previous mentioned "cannot read from or write to disk" error when using itunes after a couple downloads. i followed the steps in the link to those issues and ran some updates on my PC and still the same. HELP

Have you read both
For Firmware update failure. Disk write error please see
http://docs.info.apple.com/article.html?artnum=301267
http://docs.info.apple.com/article.html?artnum=300836

Update failure in lenovo tab a5500 a8

Similar Messages

Maybe you are looking for