Update Failure Issues

I use a Dell Dimension E520 system using Windows 7 op-system. My primary hard drive is full. How do I switch "update" files to download to another internal drive ?

I seem to have a similar issue. When I start iTunes, it starts sorting things and doing things until the beachball appears and won't go away and at last, after some 10-15 minutes of blocking the whole machine, iTunes crashes.
I have tried deep-repairing the disk, the prefs, permissions about anything. I also tried rebuilding the library from scratch. I installed the 8.1 update. It doesn't change anything. Sometimes the hang seems to be due to Genius not being able to build its database but sometimes it's obviously something else. I'm at the end of my wisdom.

Similar Messages

  • IOS 5 update failure on 3 Devices

    For the past year or more, I haven't been able to install updates from iTunes to my iPad, and IPod Touch 3G and 4G.  I keep getting the network connection time-out issue.  However, I've been able to successfully update all 3 devices by directly downloading the updates to my computer, and installing from there.
    That worked fine, until now.  When iOS5 came out, I directly downloaded the update files like before, and tried to update manually.  The updates all failed with the same error message - "The iPod/Pad could not be updated.  An unknown error occured (3002)."  I'm aware of the server overload issue in the immediate wake of the iOS5 release, and took the advice to wait awhile to retry the update process.  But it's now almost a week later, and after literally dozens of attempts to install this latest iOS release, they keep failing with the same error message.  For what it's worth, I have the latest iTunes release (installed and re-installed), and have IOS 4.3.5 on the iPad and iPods.  iTunes and Windows Vista diagnostics says everything is fine with my network connections and settings. I have tried disabling firewalls and antivirus security during the updates, and it makes no difference.
    Does Apple have any real solutions to this mess (lots of other users are still having similar problems I see), or are some users devices permanently relegated to running older operating systems?

    Sigh.  Yes, thank you, I have the correct updates for each device, downloaded directly from Apple.  I know how to install them directly from my computer, that's what I've had to do for the past year or so.  As I said, it always worked, until now.  My question is, why doesn't it work anymore, and what is Apple doing to address this, and the multiple other update failure issues that users are having with iOS5?

  • Attention: Currently we are experiencing intermittent update failures. We are aware of the issue and are actively working to resolve.

    Attention:
    Currently we are experiencing intermittent update failures. We are aware of  the issue and are actively working to resolve.

    Hello,
    This issue is resolved. "Local Upgrades are successfully restored as of Tuesday, January 18th 16:00 PST.
    Please contact Customer Support if you have any additional questions or concerns.
    Christopher C Smith
    CSE
    Cisco IronPort Customer Support 

  • Software Updates ADR Issue: "Failed to download the update from the internet. Error = 5"

    "Failed to download the update from internet. Error = 5"
    The above is the error I am getting when running any ADR. The error is quite clear software updates are failing to download and Error = 5 being a permissions error its clear that the downloads are failing due to incorrect permissions applied to the download
    path. 
    Here is the last bit of my ruleengine.log, everything above is the same except for the update trying to be downloaded of course:
    Failed to download the update from internet. Error = 5
    SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
    5148 (0x141C)
    Failed to download ContentID 16860969 for UpdateID 16857152. Error code = 5
    SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
    5148 (0x141C)
    Downloading contents (count = 1) for UpdateID 16857255
    SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
    5148 (0x141C)
    List of update content(s) which match the content rule criteria = {16861141}
    SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
    5148 (0x141C)
    Downloading content with ID 16861141 in the package
    SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
    5148 (0x141C)
    Failed to download the update from internet. Error = 5
    SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
    5148 (0x141C)
    Failed to download ContentID 16861141 for UpdateID 16857255. Error code = 5
    SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
    5148 (0x141C)
    Failed to download any update SMS_RULE_ENGINE
    6/26/2014 9:22:00 AM 5148 (0x141C)
    Failed to download update contents. SMS_RULE_ENGINE
    6/26/2014 9:22:00 AM 5148 (0x141C)
    No new update was added to the package. Package "SCP0008A" would not be updated.
    SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
    5148 (0x141C)
    Failed to run the DownloadAction for the AutoDeployment.
    SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
    5148 (0x141C)
    STATMSG: ID=8706 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_RULE_ENGINE" SYS=SCCM-MPS.DSCICORP.COM SITE=SCP PID=2376 TID=5148 GMTDATE=Thu Jun 26 13:22:00.164 2014 ISTR0="SMS Rule Engine" ISTR1="Failed to download one or more
    content files" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
    5148 (0x141C)
    Enforcing Create Deployment Action SMS_RULE_ENGINE
    6/26/2014 9:22:00 AM 5148 (0x141C)
      Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>SCP00055</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>0</Duration><DurationUnits>Hours</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>true</AllowRestart><DisableMomAlert>false</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>true</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>true</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>true</AllowInstallOutSW><EnableAlert>true</EnableAlert><AlertThresholdPercentage>90</AlertThresholdPercentage><AlertDuration>7</AlertDuration><AlertDurationUnits>Days</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>DisplaySoftwareCenterOnly</UserNotificationOption><LimitStateMessageVerbosity>false</LimitStateMessageVerbosity><StateMessageVerbosity>10</StateMessageVerbosity><AllowWUMU>true</AllowWUMU><AllowUseMeteredNetwork>true</AllowUseMeteredNetwork></DeploymentCreationActionXML>
    SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
    5148 (0x141C)
      Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
    SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
    5148 (0x141C)
      Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test
    ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
    SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
    5148 (0x141C)
        Parsing Deployment Action XML...
    SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
    5148 (0x141C)
        Parsing Rule XML... SMS_RULE_ENGINE
    6/26/2014 9:22:00 AM 5148 (0x141C)
    Could not find element DeploymentId SMS_RULE_ENGINE
    6/26/2014 9:22:00 AM 5148 (0x141C)
    Could not find element UpdateGroupId SMS_RULE_ENGINE
    6/26/2014 9:22:00 AM 5148 (0x141C)
    Could not find element UpdateGroupName SMS_RULE_ENGINE
    6/26/2014 9:22:00 AM 5148 (0x141C)
        SQL is: select cis.CI_ID from vCI_ConfigurationItems cis join vProvisionedCIs pci on cis.CI_ID = pci.CI_ID where cis.CI_ID in (16793068, 16793070, 16793441, 16793445, 16793531, 16793686, 16793688, 16794597, 16794600, 16794602, 16794604, 16795443,
    16795445, 16795709, 16795711, 16796210, 16796222, 16796292, 16796298, 16799495, 16799503, 16799602, 16799700, 16799703, 16799705, 16799712, 16799718, 16800300, 16800302, 16800367, 16800369, 16800371, 16800375, 16801224, 16801227, 16801237, 16801239, 16801287,
    16801289, 16801559, 16801566, 16801996, 16802034, 16802839, 16802841, 16803306, 16803310, 16803420, 16803422, 16806477, 16806479, 16809354, 16809360, 16809393, 16809397, 16809774, 16809786, 16809792, 16813338, 16813348, 16813636, 16813638, 16814948, 16814950,
    16815151, 16815153, 16817088, 16817102, 16817108, 16817398, 16817400, 16818677, 16818691, 16825397, 16840448, 16840458, 16840460, 16840462, 16840690, 16840700, 16840702, 16840710, 16840824, 16840826, 16842640, 16842641, 16842802, 16842803, 16842841, 16842870,
    16842871, 16842896, 16842917, 16843017, 16843042, 16843049, 16843051, 16845981, 16846404, 16846751, 16846757, 16848017, 16848021, 16848664, 16848687, 16849383, 16849385, 16852506, 16852514, 16852516, 16855484, 16857102, 16857151, 16857152, 16857255) order
    by cis.CI_ID SMS_RULE_ENGINE
    6/26/2014 9:22:00 AM 5148 (0x141C)
          0 of 115 updates are downloaded and will be added to the Deployment.
    SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
    5148 (0x141C)
    The rule resulted in no updates being found. Skip deployment creation or update...
    SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
    5148 (0x141C)
    CRuleHandler: Enforcing Actions for Rule 16777228 failed!
    SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
    5148 (0x141C)
    CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
    6/26/2014 9:22:00 AM 5148 (0x141C)
    Updated Failure Information for Rule: 16777228
    SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
    5148 (0x141C)
    CRuleHandler: Deleting Rule 16777228 SMS_RULE_ENGINE
    6/26/2014 9:22:00 AM 5148 (0x141C)
    Found notification file C:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\16777228.RUL
    SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
    5148 (0x141C)
    RuleSchedulerThred: Change in Rules Object Signalled.
    SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
    5228 (0x146C)
    Refreshed ScheduleList instance for Rule (16777228) from schedule string () with next occurence (12/31/1969 7:00:00 PM)
    SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
    5228 (0x146C)
    FindNextEventTime found next event for RuleID 0 as :1/1/2038 12:00:00 AM
    SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
    5228 (0x146C)
    RuleEngine: Got next rule execution time successfully. Next event is in  12369097 minutes
    SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
    5228 (0x146C)
    Sleeping for 15 minutes SMS_RULE_ENGINE
    6/26/2014 9:22:10 AM 5228 (0x146C)
    Also, I do not have a patchdownloader.log anywhere, Ive checked all aforementioned locations from various sources and it just simply does not exist on my SCCM server. Here is my setup:
    Server1: Primary server with all roles installed locally except the site database is on its own server. WSUS is installed locally here and DB is stored here. 
    Server2: SQL DB for Primary site DB
    Server3: Secondary remote site running MP, DP, SUP. DB is SQL Express local. 
    So the SUP role was installed successfully on both server1 first and server 2 second with the site servers accounts. The SUP Synchronizes successfully and I can see a large list of updates available for use but not downloaded of course. I have set WSUS option
    to store updates locally and have plenty of space at the target destination.
    So here is my issue, I have been working on this issue for the better part of a week and understand the error code from the ruleengine.log to be a permissions issue. I have also proved this out but creating a test ADR with minimal updates and applied NTFS perms
    to the target path for Modify with the everyone group (testing purposes only). The updates downloaded successfully. So this puts me right back to where I was, knowing its a permissions issue but not understanding what permissions are needed. Let me explain
    further.
    The best way to start is to show what perms I have to the target location for downloads/wsus/sup anything:
    Path: \\Server1\UpdatesAndDefinitions    (permissions being applied to the UpdatesAndDefinitions root folder)
    SCCMAdmin (account used for most SCCM tasks except for NA) / Modify / Share and NTFS
    Server1$ (primary site server) / Modify / NTFS
    Everyone / read and execute / NTFS and Share
    There are other system generated perms but the above three are the important ones. So hence my confusion I know that the SCCMAdmin account or the Server its self has to be accessing the target directory so why is it failing with a permissions issue?
    My next step was to enable Auditing on the target path. Doing so revealed just what I thought and through me into further frustration:
    A network share object was accessed.
    Subject:
    Security ID:
    SYSTEM
    Account Name:
    SCCM-MPS$
    Account Domain:
    DSCI
    Logon ID:
    0x3e7
    Network Information:
    Source Address:
    fe80::306a:8827:8672:3ba5
    Source Port:
    50329
    Share Name: \\*\UpdatesAndDefinitions
    A handle to an object was requested.
    Subject:
    Security ID:
    DSCI\sccmadmin
    Account Name:
    sccmadmin
    Account Domain:
    DSCI
    Logon ID:
    0xad903c
    Object:
    Object Server:
    Security
    Object Type:
    File
    Object Name:
    F:\UpdatesAndDefinitions
    Handle ID:
    0xf5c
    Process Information:
    Process ID:
    0x10cc
    Process Name:
    C:\Windows\explorer.exe
    Access Request Information:
    Transaction ID:
    {00000000-0000-0000-0000-000000000000}
    Accesses:
    READ_CONTROL
    ReadAttributes
    Access Mask:
    0x20080
    Privileges Used for Access Check:
    Restricted SID Count:
    0
    Now I may not be the best I traversing through the mess of audit entry's and translating them, but from what I can see the two accounts that have the proper share and ntsf perms ive listed above are indeed the ones accessing the target location and the audit
    code is success. I filter for failures and found no audits for failures whatsoever yet my downloads still fail religiously, unless of course I open myself up with the everyone group.
    So next... I tried adding in the Network Service account with proper permissions, the Local Service Account, my user account, and all no go's.
    Next... I remove the SUP roles from SCCM checked the logs for deinstall confirmations, and reinstalled these roles. No Go!
    If anyone can assist I would be in your debt and very grateful. 
    Oh last note, but very important note I'm running SCCM 2012 SP1 CU4
    Thanks,
    Michael
    MichaelSpaulding

    I just tested with the everyone group further; I added everyone with modify for ntfs and just read only for share and downloads failed!
    I then changed the share perms for everyone to change and the ntfs to read/execute and poof downloads complete! Obviously change share perms for everyone leaves me open which Id like to prevent, so finding what account is being used is crucial.
    I have already tried adding all of the SCCM accounts I use and the servers themselves as change perms to share and ntfs and have not had any luck.
    MichaelSpaulding

  • "firmware update failure. disk write error."

    i get this when i use the ipod Updater after clicking "restore"... this thing is giving me a headache. Also get the previous mentioned "cannot read from or write to disk" error when using itunes after a couple downloads. i followed the steps in the link to those issues and ran some updates on my PC and still the same. HELP

    Have you read both
    For Firmware update failure. Disk write error please see
    http://docs.info.apple.com/article.html?artnum=301267
    http://docs.info.apple.com/article.html?artnum=300836

  • Windows 8.1 Update Failure : We couldn't complete the updates, Undoing changes

    Yesterday I built my first computer and I installed Windows 8.1 on it, everything was running perfectly fine until today. This morning I had an update notification and I installed it, about half way through the update an error occurred and it said it couldn't
    complete the update and it was undoing the changes. I left it on that screen for about an hour and nothing happened. I tried finding what the update was, so I went to recently installed updates, and there was about 40 of them from just today. Whenever I tried
    to uninstall any of the updates, it said error, preventing me from deleting any of the updates. I was wondering if anyone could help me try to uninstall/re-install this update.

    Hi Kmanxx,
    The update failure might be caused by a variety of reasons such as connection issues, incomplete Components and firewall. For troubleshooting, specific error code of the failure update will be helpful.
    You also could find installation failure events and error code in log files, such as WindowsUpdate.log (C:\Windows\ WindowsUpdate.log) and CBS.log(C:\windows\logs\cbs\cbs.log). Here you first want to search for “error” in your logs. This will search for
    Error entries. Focus on the day the installation attempt occurred. Refer to your time line of update log, find what error happened. Of course you could post your log content and we’d like to give it a look.
    How to collect the specific error code of failure update:
    We can do this by viewing your update history.
    1. Swipe in from the right edge of the screen (or, if you're using a mouse, pointing to the lower-right corner of the screen and moving the mouse pointer up), and tap or click Settings.
    2. Tap or click Change PC settings, and then Update and recovery.
    3. Tap or click View your update history.
    View failed update error code.
    For your reference:
    Unable to install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2(also applies to Windows8.1):
    http://support.microsoft.com/kb/2509997/en-us
    If all updates fail to install on a particular client or if for example you cannot install a Service Pack:
    http://blogs.technet.com/b/roplatforms/archive/2011/04/28/installation-failures-cbs-store-corruptions-uncommon-issues-and-troubleshooting.aspx
    Fix Windows corruption errors by using the DISM or System Update Readiness tool:
    https://support.microsoft.com/kb/947821?wa=wsignin1.0
    Regards

  • Adobe Acrobat 9.3.4 Update failure- "Error Applying Transforms, verify that the specified...

    I have ignored this issue for long enough.  I have Adobe CS4, with Acrobat Pro version 9.3.4.  Windows 7.  Acrobat updater pops up on my machine, and when I execute the update requested, the updater gives me the update failure message, with code 1604, "error applying transforms."
    I have seen solutions posted for this tranforms message, but it was a problem with Acrobat 8.  I have seen no solutions as of yet for Acrobat 9, so I thought I would post.
    I also tried opening Acrobat 9 Pro, and under the help tab, I initiated "repair".  I get the same transform error message as above.  Any advice anyone?  Should I just uninstall Acrobat 9 Pro and reinstall using my CS4 disk?
    Thanks for the help!

    If you have original CD with Acrobat installation, copy all files with extension .mst from this CD to the following location:
    C:\Program Files (x86)\Adobe\Acrobat 9.0\Setup Files\[ProductCode]   if this is 64bit system
    or
    C:\Program Files\Acrobat 9.0\Setup Files\[ProductCode]   if this is 32bit system
    where [ProductCode] is a unique value which identifies your language version of Acrobat 9 Pro.
    If this is EFG version, it should be {AC76BA86-1033-F400-7760-000000000004}
    If location does not exist, create it.
    2. If you do not have original CD and cannot find .mst files, provide the exact Product name including language and I will provide further instructions.
    Good luck

  • Windows update failures over the past several months

    I'm having the same issues regarding windows update failures as many documented in this forum. I have run the repairs recommended, drive scans, etc. with no success. I'm at the point that I think that it would be better to cut off the update notice. I have
    zipped up the files recommended and posted them on my skydrive site. That location is https://onedrive.live.com/?cid=C1221863E15FBC11&id=C1221863E15FBC11%211274.
    Please help. Joe Collins
     

    at the point that I think that it would be better to cut off the update notice.
    You may be right.  Try eliminating WU from a symptom description.  E.g. pick one of the updates which is available as a download and try installing it that way.  Just use WU as a guide for what you should download and install manually. 
    I imagine that if that works eventually WU will repair itself and realize that it doesn't need to do anything else for you.
    A search to support the idea of manual download and install acting as a workaround for this symptom:
    http://www.microsoft.com/en-us/search/results.aspx?q=0x800f0922%20CBS%20download
    <quote>
    Well, when I try to download Office 2013 updates, about 15 of them, they installed fine.
    </quote>
    Also
    http://social.technet.microsoft.com/Forums/windows/en-US/7060c961-3b7c-42ba-ad84-008c357478d8/installation-failure-windows-failed-to-install-the-following-update-with-error-0x800f0922?forum=w8itprogeneral
    (Microsoft search for
        [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
    Another suggestion which could be implied by your diagnostics would be to uninstall your Norton package (and any of the other interferers which are mentioned that would be suspect).  Norton is notorious for interference with updating and is also known
    to interfere even when it is supposedly disabled and is also known interfere even when it has supposedly been uninstalled, so who knows what the cause of the problem is, corruption or blocking, you could at least change your POQexec.log by taking such
    manual action.
    BTW what have you done exactly about trying to repair WU?  You could save yourself a lot of manual effort if you could get it working properly.  
    Otherwise, on the manual update tack I would try doing first the ones which arrive in pieces.  Search WindowsUpdate.log for  Downloading  for clues that way.
    Good luck
    Robert Aldwinckle

  • I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITun

    I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITunes is corrupted or is not installed correctly.  Please reinstall Itunes"
    iMac, iOS 6

    HI,
    If your old version of iTunes is still working - then I sugest you stick with that.
    iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
    Just a friendly advise and warning :-)

  • Global Correlation update Failure error

    Hello,
    I have received following error in IPS regarding global correlation update
    A global correlation update failed: ExecLoadCollabUpdate control transaction failed: Control transaction cannot be completed at this time
    is any one aware about this error? is it major issue and affecting IPS? I think this is because correlation update failure. Please let me know if any one has more information on this error

    Whenever a global correlation update fails, an evError event is generated. The error message is included in sensor statistics. The following conditions result in a status message with the severity of Error:
    •The sensor is unlicensed
    •No DNS or HTTP proxy server is configured
    •The manifest exchange failed
    •An update file download failed
    •Applying or committing the update failed
    For global correlation update fails, refer
    http://www.cisco.com/c/en/us/support/docs/security/ips-4200-series-sensors/50360-ids-faq.html

  • Global Correlation Update Failures

    I've recently turned on Global Correlation but we've failed to update every 5 minutes.
    PL-ASA-IPS# show stat global
    Network Participation:
       Counters:
          Total Connection Attempts = 2
          Total Connection Failures = 0
          Connection Failures Since Last Success = 0
       Connection History:
          Connection Attempt on February 16 2010, at 14:28:38 UTC = Successful
          Connection Attempt on February 16 2010, at 14:19:06 UTC = Successful
    Updates:
       Status Of Last Update Attempt = Failed
       Time Since Last Successful Update = never
       Counters:
          Update Failures Since Last Success = 4
          Total Update Attempts = 4
          Total Update Failures = 4
       Update Interval In Seconds = 300
       Update Server = update-manifests.ironport.com
       Update Server Address = 204.15.82.17
       Current Versions:
          config = 0
          drop = 0
          ip = 0
          rule = 0
    Warnings:
    I have a static NAT translation for the IPS, there are no proxy servers in our enviorment and it can ping outside as well as update-manifests.ironport.com (204.15.82.17). DNS is setup as well.
    In the logs I see this entry:
    16Feb2010 14:13:15.679 265.199 collaborationApp[491] rep/E A global correlation update failed: Failed download of ibrs/1.1/config/default/1236210407 : HTTP connection failed
    I guess I'm at a loss for what else I can check. We have no problems sending the Network Participation data but we can't get any data. Any suggestions?
    Cisco Intrusion Prevention System, Version 7.0(2)E3
    Signature Definition:
        Signature Update    S469.0                   2010-02-11
        Virus Update        V1.4                     2007-03-02
    OS Version:             2.4.30-IDS-smp-bigphys

    I have the same issue, i have no ASA or websense product between this device and the iNet.
    Does anyone have a fix or workaround?
    I have an AIM-IPS running 7.0(6)E4 with Signature versuon S599.0. All updates to date have been manualy d/l to a local ftp server
    the auto update "seems" to run but never gets any updates
    This is what i see
    # sh stat global
    Network Participation:
       Counters:
          Total Connection Attempts = 127
          Total Connection Failures = 127
          Connection Failures Since Last Success = 127
       Connection History:
          Connection Attempt on October 06 2011, at 10:46:32 UTC = Failed
          Connection Attempt on October 06 2011, at 09:24:32 UTC = Failed
          Connection Attempt on October 06 2011, at 08:03:04 UTC = Failed
          Connection Attempt on October 06 2011, at 07:59:52 UTC = Failed
          Connection Attempt on October 06 2011, at 06:36:57 UTC = Failed
    Updates:
       Status Of Last Update Attempt = Failed
       Time Since Last Successful Update = never
       Counters:
          Update Failures Since Last Success = 2702
          Total Update Attempts = 2702
          Total Update Failures = 2702
       Update Interval In Seconds = 300
       Update Server = update-manifests.ironport.com
       Update Server Address = Unknown
       Current Versions:
          config = 0
          drop = 0
          ip = 0
          rule = 0
    Warnings:
    #sh ver
    Application Partition:
    Cisco Intrusion Prevention System, Version 7.0(6)E4
    Host:
        Realm Keys          key1.0
    Signature Definition:
        Signature Update    S599.0                 2011-09-29
    OS Version:             2.6.14-Cavium-Octeon
    Platform:               AIM-IPS-K9
    Serial Number:          xxx
    Licensed, expires:      31-Mar-2012 UTC
    Sensor up-time is 9 days.
    Using 54726656 out of 454148096 bytes of available memory (12% usage)
    system is using 22.4M out of 80.0M bytes of available disk space (28% usage)
    application-data is using 46.8M out of 213.0M bytes of available disk space (23% usage)
    boot is using 54.4M out of 114.8M bytes of available disk space (50% usage)
    application-log is using 61.8M out of 513.0M bytes of available disk space (12% usage)
    MainApp            B-BEAU_2011_SEP_10_00_30_7_0_5_45   (Ipsbuild)   2011-09-10T00:32:09-0500   Running
    AnalysisEngine     B-BEAU_2011_SEP_10_00_30_7_0_5_45   (Ipsbuild)   2011-09-10T00:32:09-0500   Running
    CollaborationApp   B-BEAU_2011_SEP_10_00_30_7_0_5_45   (Ipsbuild)   2011-09-10T00:32:09-0500   Running
    CLI                B-BEAU_2011_SEP_10_00_30_7_0_5_45   (Ipsbuild)   2011-09-10T00:32:09-0500
    Upgrade History:
    * IPS-AIM-K9-7.0-6-E4       17:39:07 UTC Sat Sep 10 2011
      IPS-sig-S599-req-E4.pkg   07:59:08 UTC Wed Oct 05 2011
    Recovery Partition Version 1.1 - 7.0(6)E4
    Host Certificate Valid from: 25-Sep-2011 to 25-Sep-2013
    >
    as seen above there is no ip address listed for "update-manifests.ironport.com"
    NS lookup is able to resolve,
    why can't the IPS?
    I can i hard code the ip address?
    >Non-authoritative answer:
    >Name:    update-manifests.ironport.com
    >Address:  204.15.82.17

  • Really frustrating update failures. Slowed down my PC by 1000 times

    Hello, I've been using windows 8 from its beta days. But after upgrading to windows 8.1, every major update seems to fail. I've also looked into the history and tried installing them manually but it fails after the stage "copying packages to the windows
    update package". And if this isn't bad enough, my laptop takes about 20-25 minutes to shut down. It keeps showing "preparing updates, please don't turn off your computer". 
    I am getting really frustrated since there is nothing I can do about this. And this doesn't seem to be the first time, it happens every time there is a major update. 
    Also after this update failures, i seem to have other issues such as
    Wifi stops working after 5 minutes of youtube streaming
    chrome crashes more often than ever
    performance in general has been absolutely awful 
    None of these happened before. Also I do not have any viruses or malwares.
    Currently failed updates.
    KB2887595
    KB2919355
    Should i just downgrade back to windows 7? Or is there a permanent solution to this problem. 
    Also when I install the update manually, the error says "The system cannot find the path specified" 

    Hi,
    Are there any error code? please also check Windows\logs\cbs for the detailed information.
    for KB 2919255, this is a known update , we call it Windows 8.1 update 1, you can refer to this link ans see if it can help you
    http://windows.microsoft.com/en-in/windows-8/install-latest-update-windows-8-1
    You can also clear the software distribution folder, then install the updates again.
    At the Command Prompt type the following commands one at a time:
    net stop wuauserv   hit enter
    net stop bits     hit enter
    Now browse to the C:\Windows\Software Distribution folder and delete all the files and folders inside. 
    net start wuauserv     hit enter
    net start bits    hit enter
    Meanwhile, keep your windows uo to date before installing the two updates. KB 2919442 is the prerequisite to install KB 2919355
    Yolanda Zhu
    TechNet Community Support

  • Update failure when adding email

    Hi,
    I have a blackberry curve9360, I added my work email on my personal phone, and when I got my work phone I signed in with my personal blackberry ID, which synced my personal emails and work emails.  I decided to remove my personal email from my work phone so I created a new blackberry ID. Now when I try to add my work email to the new blackberry ID  I get an error : "Update Failure". Can someone please advise 

    Hello amritsent,
    Welcome to the BlackBerry Support Community.
    To clarify - Are you attempting to change the BlackBerry ID on this BlackBerry smartphone?
    If so, the following article outlines the process required::
    http://bbry.lv/L0U5QX
    Let us know if you have any questions.
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Reg: Update Failures

    Hi All,
    I am working on ECC6.0, I can see around 80 updates failed due to the following reason. <b>ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC</b>.
    what should i do now? how can i come out from this?
    kind regards,
    praveen

    Hi Praveen,
    As the error message suggests, the failure was due to unique constraint violation on the object, which is fine as the object is consistant.
    Get hold of the username / transaction and check with the users if they are having any issues with their records / data. If they find it to be consistant, just make note of the update failures and analyze which job / process caused duplicate records to be inserted.
    Regards,
    Nisch

  • Carrier data update failure and droping calls continously

    This issue with my new iphone 4s with only 1 carrier not all
    carrier data update failure and droping calls continously & bad quality.my carrier which is ZAIN TELECOM/Iraq that not resolved with restore

    After managed to keep my Z10 running again, it informed me, that there was a new update available, released at 6:38pm with 88MB.
    I installed it, hoping that it would terminate the problems I mentioned in my initial post...and:
    I can now JOIN THIS PROBLEM FRACTION:
    http://supportforums.blackberry.com/t5/BlackBerry-Z10/Just-updated-to-latest-OS-and-phone-is-frozen-...
    WHAT THE F IS WRONG WITH YOU PEOPLE????
    I AM THAT CLOSE, SMASHING THAT DEVICE WITH A SLEDGEHAMMER!
    Did I mention, that I normally charge my customers with 2.500€ a day, when they order my services as a communication consultant and that I do most of my business when I am mobile and traveling?
    Due to Your sloppy work, I already "lost" a day, where I was not available and I did not get any kind of answer of You guys til know... Maybe I´ll should charge BlackBerry for each and every hour that I am "out of business" caused by Your work...

Maybe you are looking for