Update failure linux

I have Air installed on my eeepc on the default Xandros.
Works with Twhirl, thought the screen goes haywire sometimes.
When I run the updater it fails without updating, some sort of permissions prolem I gues?

Please uninstall existing"adobeair1.0" and "adobe-certs" packages and than try these steps on terminal:
1. touch ~/.airinstall.log
2. chmod +x <path-of-AdobeAIRInstaller.bin>
3. ./<path-of-AdobeAIRInstaller.bin>
4. Continue with the installation till it fails
open the log file (~/.airinstall.log) and send its contents to [email protected], along with this forum's reference.
this will help us in resolving the issue
Thanks
Syed

Similar Messages

  • Does anyone know how to solve: "Firmware update failure. Disk write error"?

    Hi all,
    Here is the list of all what went wrong and where I am now:
    1. My Ipod worked well
    2. I wanted to update it, you know, the normal thing with Itunes
    3. Every time I tried, my computer froze. I was unable to add only one song (both automatically and manually).
    4. I took my external drive (where my music is) at work and tried again: same result.
    5. I decided to run the Updater I have on the CD that came with the Ipod.(2005-02-07; I usually avoid the newer version, having had once a problem when putting a newer version of Updater).
    6. The Updater was unable to operate any action on my Ipode (I don't remember the messages now).
    7. Like I tried what I describe here above like a hundred time. I decided to format the Ipod with Windows (My Computer, right click on the Ipod, format).
    8. It did and now I have only the famous folder with an exclamation mark on my Ipod.
    9. Now when I am running the Updater, it says it cannot Restore the factory settings giving this message "Firmware update failure. Disk write error".
    I would appreciate any help because, during the last 2 hours, I read and tried all I found on the Support Help here on the Apple web side without any result yet.
    Thank a lot for your answer

    Hi Cyrille,
    Have you looked at Knowledge Base Document #301267 on "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod?
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • RMMR1MRS-When run in background cause update failure errors looking

    hi,
          RMMR1MRS report when run in background cause update failure errors .
    There are few  below reason for the error log.
    1.  for the PO invoice already generated -  (its right if already invoice generated. should not happen again)
    2.  In  MIGO,  entire  quantity has been reversed  and also invoice generated with zero value - ( its right , should not happen invoice again )
    3. Particular PO line item deleted -  (its right if the PO line item deleted. ERS settlement not require)
    For the all above reason, the update error occurs.  But the mean time  the program  "RMMR1MRS"  should not through the update error log. 
    Note: The job was not terminated due to this update error and also no harm because of the error log
    can you please help on this update failure why it occurs.

    Have you found a solution already? If so, please, share it with the community and close this thread.

  • "firmware update failure. disk write error."

    i get this when i use the ipod Updater after clicking "restore"... this thing is giving me a headache. Also get the previous mentioned "cannot read from or write to disk" error when using itunes after a couple downloads. i followed the steps in the link to those issues and ran some updates on my PC and still the same. HELP

    Have you read both
    For Firmware update failure. Disk write error please see
    http://docs.info.apple.com/article.html?artnum=301267
    http://docs.info.apple.com/article.html?artnum=300836

  • Oops, bcache hung up after update to linux-3.11.4

    My ext4 root partion mounted on a bcache device
    and the /dev/bcache0 register by a bakup partion on fakeraid /dev/mapper/isw_dfabciibaj_ird1p2
    The last time update to linux-3.11.4, it hung up on systemd job starting.
    So I enter emergency prompt with kernel option "ro", then try mount -o remount,rw /
    but the bcache module crash in seconds
    the dmesg here:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.11.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d16b1fdf-92f0-4474-b315-a906a609af1f ro vga=0 pci=nocrs radeon.audio=0 nomodeset emergency
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008e3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000008e400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffaffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffbffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bffc0000-0x00000000bffeffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.5 present.
    [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./P45TS-R, BIOS P1.60 09/28/2009
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-D7FFF write-protect
    [ 0.000000] D8000-DFFFF uncachable
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xbffb0 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000088000] 88000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
    [ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
    [ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
    [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
    [ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
    [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
    [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffaffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
    [ 0.000000] [mem 0xbfe00000-0xbffaffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x379b4000-0x37cd1fff]
    [ 0.000000] ACPI: RSDP 00000000000f9c50 00014 (v00 ACPIAM)
    [ 0.000000] ACPI: RSDT 00000000bffb0000 00040 (v01 092809 RSDT1058 20090928 MSFT 00000097)
    [ 0.000000] ACPI: FACP 00000000bffb0200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 00000000bffb0440 05993 (v01 AS147 AS147151 00000151 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000bffc0000 00040
    [ 0.000000] ACPI: APIC 00000000bffb0390 0006C (v01 092809 APIC1058 20090928 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 00000000bffb0400 0003C (v01 092809 OEMMCFG 20090928 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 00000000bffc0040 00072 (v01 092809 OEMB1058 20090928 MSFT 00000097)
    [ 0.000000] ACPI: AAFT 00000000bffb8440 00027 (v01 092809 OEMAAFT 20090928 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000bffb8470 00038 (v01 092809 OEMHPET 20090928 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000bffc0610 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
    [ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffcfff]
    [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x13fffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0008dfff]
    [ 0.000000] node 0: [mem 0x00100000-0xbffaffff]
    [ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
    [ 0.000000] On node 0 totalpages: 1048381
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3981 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12223 pages used for memmap
    [ 0.000000] DMA32 zone: 782256 pages, LIFO batch:31
    [ 0.000000] Normal zone: 4096 pages used for memmap
    [ 0.000000] Normal zone: 262144 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0008e000-0x0008efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbffb0000-0xbffbffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbffc0000-0xbffeffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
    [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86528 r8192 d24064 u524288
    [ 0.000000] pcpu-alloc: s86528 r8192 d24064 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031977
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d16b1fdf-92f0-4474-b315-a906a609af1f ro vga=0 pci=nocrs radeon.audio=0 nomodeset emergency
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 4046448K/4193524K available (5046K kernel code, 795K rwdata, 1696K rodata, 1140K init, 1284K bss, 147076K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2837.772 MHz processor
    [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 5677.02 BogoMIPS (lpj=9459240)
    [ 0.003339] pid_max: default: 32768 minimum: 301
    [ 0.003369] Security Framework initialized
    [ 0.003379] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003380] Yama: becoming mindful.
    [ 0.003646] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.008325] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.009343] Mount-cache hash table entries: 256
    [ 0.009562] Initializing cgroup subsys memory
    [ 0.009579] Initializing cgroup subsys devices
    [ 0.009580] Initializing cgroup subsys freezer
    [ 0.009582] Initializing cgroup subsys net_cls
    [ 0.009583] Initializing cgroup subsys blkio
    [ 0.009605] CPU: Physical Processor ID: 0
    [ 0.009606] CPU: Processor Core ID: 0
    [ 0.009608] mce: CPU supports 6 MCE banks
    [ 0.009615] CPU0: Thermal monitoring enabled (TM2)
    [ 0.009622] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    [ 0.009697] Freeing SMP alternatives memory: 20K (ffffffff819e5000 - ffffffff819ea000)
    [ 0.010810] ACPI: Core revision 20130517
    [ 0.012890] ACPI: All ACPI Tables successfully acquired
    [ 0.013339] ftrace: allocating 20089 entries in 79 pages
    [ 0.020405] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.054077] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8300 @ 2.83GHz (fam: 06, model: 17, stepping: 06)
    [ 0.056666] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.056666] ... version: 2
    [ 0.056666] ... bit width: 40
    [ 0.056666] ... generic registers: 2
    [ 0.056666] ... value mask: 000000ffffffffff
    [ 0.056666] ... max period: 000000007fffffff
    [ 0.056666] ... fixed-purpose events: 3
    [ 0.056666] ... event mask: 0000000700000003
    [ 0.089932] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.076732] smpboot: Booting Node 0, Processors #1
    [ 0.089944] Brought up 2 CPUs
    [ 0.089946] smpboot: Total of 2 processors activated (11355.05 BogoMIPS)
    [ 0.090094] devtmpfs: initialized
    [ 0.093351] PM: Registering ACPI NVS region [mem 0xbffc0000-0xbffeffff] (196608 bytes)
    [ 0.094203] RTC time: 11:27:58, date: 10/09/13
    [ 0.094245] NET: Registered protocol family 16
    [ 0.094379] ACPI: bus type PCI registered
    [ 0.094381] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.094432] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.094434] PCI: not using MMCONFIG
    [ 0.094436] PCI: Using configuration type 1 for base access
    [ 0.094955] bio: create slab <bio-0> at 0
    [ 0.094955] ACPI: Added _OSI(Module Device)
    [ 0.094955] ACPI: Added _OSI(Processor Device)
    [ 0.094955] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.094955] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.094955] ACPI: EC: Look up EC in DSDT
    [ 0.097132] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.098718] ACPI: SSDT 00000000bffc00c0 004B2 (v01 PmRef P001Cst 00003001 INTL 20051117)
    [ 0.098875] ACPI: Dynamic OEM Table Load:
    [ 0.098877] ACPI: SSDT (null) 004B2 (v01 PmRef P001Cst 00003001 INTL 20051117)
    [ 0.099036] ACPI: SSDT 00000000bffc0580 00085 (v01 PmRef P002Cst 00003000 INTL 20051117)
    [ 0.099192] ACPI: Dynamic OEM Table Load:
    [ 0.099194] ACPI: SSDT (null) 00085 (v01 PmRef P002Cst 00003000 INTL 20051117)
    [ 0.099402] ACPI: Interpreter enabled
    [ 0.099409] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
    [ 0.099421] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.099422] ACPI: Using IOAPIC for interrupt routing
    [ 0.099438] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.100369] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.116532] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.116620] ACPI: No dock devices found.
    [ 0.121855] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.121983] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.122161] acpi PNP0A08:00: ACPI _OSC control (0x1c) granted
    [ 0.122268] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.122270] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.122272] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.122274] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
    [ 0.122276] acpi PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
    [ 0.122277] acpi PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] (ignored)
    [ 0.122279] PCI: root bus 00: using default resources
    [ 0.122367] PCI host bridge to bus 0000:00
    [ 0.122370] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.122371] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.122373] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
    [ 0.122381] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
    [ 0.122395] DMAR: Forcing write-buffer flush capability
    [ 0.122397] DMAR: Disabling IOMMU for graphics on this chipset
    [ 0.122460] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
    [ 0.122489] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.122524] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.122575] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
    [ 0.122611] pci 0000:00:1a.0: reg 0x20: [io 0xa400-0xa41f]
    [ 0.122685] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.122721] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
    [ 0.122757] pci 0000:00:1a.1: reg 0x20: [io 0xa480-0xa49f]
    [ 0.122830] pci 0000:00:1a.1: System wakeup disabled by ACPI
    [ 0.122864] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
    [ 0.122899] pci 0000:00:1a.2: reg 0x20: [io 0xa800-0xa81f]
    [ 0.122973] pci 0000:00:1a.2: System wakeup disabled by ACPI
    [ 0.123015] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
    [ 0.123033] pci 0000:00:1a.7: reg 0x10: [mem 0xfdefec00-0xfdefefff]
    [ 0.123109] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.123148] pci 0000:00:1a.7: System wakeup disabled by ACPI
    [ 0.123184] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
    [ 0.123197] pci 0000:00:1b.0: reg 0x10: [mem 0xfdef4000-0xfdef7fff 64bit]
    [ 0.123252] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.123318] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
    [ 0.123375] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.123414] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.123448] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
    [ 0.123504] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.123545] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 0.123577] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
    [ 0.123633] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.123672] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.123704] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
    [ 0.123760] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.123799] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.123833] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
    [ 0.123889] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.123928] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.123962] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
    [ 0.123997] pci 0000:00:1d.0: reg 0x20: [io 0xa880-0xa89f]
    [ 0.124072] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.124106] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
    [ 0.124142] pci 0000:00:1d.1: reg 0x20: [io 0xac00-0xac1f]
    [ 0.124215] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.124248] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
    [ 0.124283] pci 0000:00:1d.2: reg 0x20: [io 0xb000-0xb01f]
    [ 0.124356] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.124398] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
    [ 0.124416] pci 0000:00:1d.7: reg 0x10: [mem 0xfdeff800-0xfdeffbff]
    [ 0.124493] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.124531] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.124563] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.124633] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.124667] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
    [ 0.124734] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
    [ 0.124739] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
    [ 0.124742] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)
    [ 0.124830] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
    [ 0.124845] pci 0000:00:1f.2: reg 0x10: [io 0xb880-0xb887]
    [ 0.124852] pci 0000:00:1f.2: reg 0x14: [io 0xb800-0xb803]
    [ 0.124858] pci 0000:00:1f.2: reg 0x18: [io 0xb480-0xb487]
    [ 0.124865] pci 0000:00:1f.2: reg 0x1c: [io 0xb400-0xb403]
    [ 0.124871] pci 0000:00:1f.2: reg 0x20: [io 0xb080-0xb09f]
    [ 0.124878] pci 0000:00:1f.2: reg 0x24: [mem 0xfdeff000-0xfdeff7ff]
    [ 0.124915] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.124978] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
    [ 0.124991] pci 0000:00:1f.3: reg 0x10: [mem 0xfdeffc00-0xfdeffcff 64bit]
    [ 0.125008] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
    [ 0.125115] pci 0000:08:00.0: [1002:6818] type 00 class 0x030000
    [ 0.125126] pci 0000:08:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.125134] pci 0000:08:00.0: reg 0x18: [mem 0xfeb80000-0xfebbffff 64bit]
    [ 0.125140] pci 0000:08:00.0: reg 0x20: [io 0xe000-0xe0ff]
    [ 0.125151] pci 0000:08:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
    [ 0.125182] pci 0000:08:00.0: supports D1 D2
    [ 0.125184] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
    [ 0.125231] pci 0000:08:00.1: [1002:aab0] type 00 class 0x040300
    [ 0.125242] pci 0000:08:00.1: reg 0x10: [mem 0xfebfc000-0xfebfffff 64bit]
    [ 0.125294] pci 0000:08:00.1: supports D1 D2
    [ 0.125339] pci 0000:00:01.0: PCI bridge to [bus 08]
    [ 0.125342] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.125344] pci 0000:00:01.0: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.125347] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.125409] acpiphp: Slot [1] registered
    [ 0.125414] pci 0000:00:1c.0: PCI bridge to [bus 06-07]
    [ 0.125418] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
    [ 0.125421] pci 0000:00:1c.0: bridge window [mem 0xfe000000-0xfeafffff]
    [ 0.125426] pci 0000:00:1c.0: bridge window [mem 0xce000000-0xcfffffff 64bit pref]
    [ 0.125470] pci 0000:00:1c.1: PCI bridge to [bus 05]
    [ 0.125478] pci 0000:00:1c.1: bridge window [mem 0xcdf00000-0xcdffffff 64bit pref]
    [ 0.125524] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.125531] pci 0000:00:1c.2: bridge window [mem 0xcde00000-0xcdefffff 64bit pref]
    [ 0.125581] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 0.125589] pci 0000:00:1c.3: bridge window [mem 0xcdd00000-0xcddfffff 64bit pref]
    [ 0.125651] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.125666] pci 0000:02:00.0: reg 0x10: [io 0xc800-0xc8ff]
    [ 0.125690] pci 0000:02:00.0: reg 0x18: [mem 0xcdcff000-0xcdcfffff 64bit pref]
    [ 0.125706] pci 0000:02:00.0: reg 0x20: [mem 0xcdce0000-0xcdceffff 64bit pref]
    [ 0.125717] pci 0000:02:00.0: reg 0x30: [mem 0xfdff0000-0xfdffffff pref]
    [ 0.125775] pci 0000:02:00.0: supports D1 D2
    [ 0.125776] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.130016] pci 0000:00:1c.5: PCI bridge to [bus 02]
    [ 0.130020] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.130024] pci 0000:00:1c.5: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.130030] pci 0000:00:1c.5: bridge window [mem 0xcdc00000-0xcdcfffff 64bit pref]
    [ 0.130107] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
    [ 0.130117] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.130120] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
    [ 0.130698] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
    [ 0.130745] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
    [ 0.130789] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
    [ 0.130835] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
    [ 0.130880] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
    [ 0.130927] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
    [ 0.130973] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
    [ 0.131018] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
    [ 0.131116] ACPI: Enabled 3 GPEs in block 00 to 3F
    [ 0.131121] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.131149] Found 1 acpi root devices
    [ 0.131197] vgaarb: device added: PCI:0000:08:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.131197] vgaarb: loaded
    [ 0.131197] vgaarb: bridge control possible 0000:08:00.0
    [ 0.131197] PCI: Using ACPI for IRQ routing
    [ 0.136110] PCI: pci_cache_line_size set to 64 bytes
    [ 0.136154] e820: reserve RAM buffer [mem 0x0008e400-0x0008ffff]
    [ 0.136156] e820: reserve RAM buffer [mem 0xbffb0000-0xbfffffff]
    [ 0.136233] NetLabel: Initializing
    [ 0.136234] NetLabel: domain hash size = 128
    [ 0.136235] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.136246] NetLabel: unlabeled traffic allowed by default
    [ 0.136264] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.136268] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.136271] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.137679] Switched to clocksource hpet
    [ 0.141304] pnp: PnP ACPI init
    [ 0.141314] ACPI: bus type PNP registered
    [ 0.141374] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.141376] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.141380] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.141411] pnp 00:01: [dma 4]
    [ 0.141430] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.141467] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.141488] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.141514] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.141768] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.141873] system 00:06: [io 0x0280-0x028f] has been reserved
    [ 0.141876] system 00:06: [io 0x0290-0x029f] has been reserved
    [ 0.141879] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.142001] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.142004] system 00:07: [io 0x0800-0x087f] could not be reserved
    [ 0.142006] system 00:07: [io 0x0500-0x057f] could not be reserved
    [ 0.142008] system 00:07: [io 0x0900-0x090f] has been reserved
    [ 0.142011] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.142013] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.142015] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
    [ 0.142018] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.142075] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.142129] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.142184] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
    [ 0.142187] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.142270] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.142273] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.142276] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.142393] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.142396] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.142548] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.142550] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.142553] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.142555] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
    [ 0.142557] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
    [ 0.142560] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.142660] pnp: PnP ACPI: found 14 devices
    [ 0.142661] ACPI: bus type PNP unregistered
    [ 0.149046] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
    [ 0.149049] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 400000
    [ 0.149056] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
    [ 0.149058] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000
    [ 0.149065] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 0.149067] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000
    [ 0.149080] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
    [ 0.149083] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
    [ 0.149085] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
    [ 0.149087] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
    [ 0.149089] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.149091] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.149093] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.149097] pci 0000:00:1c.1: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
    [ 0.149099] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0400000-0xc07fffff]
    [ 0.149101] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0800000-0xc0bfffff]
    [ 0.149103] pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.149105] pci 0000:00:1c.2: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.149108] pci 0000:00:1c.3: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.149110] pci 0000:00:01.0: PCI bridge to [bus 08]
    [ 0.149112] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.149115] pci 0000:00:01.0: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.149118] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.149121] pci 0000:00:1c.0: PCI bridge to [bus 06-07]
    [ 0.149123] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
    [ 0.149127] pci 0000:00:1c.0: bridge window [mem 0xfe000000-0xfeafffff]
    [ 0.149131] pci 0000:00:1c.0: bridge window [mem 0xce000000-0xcfffffff 64bit pref]
    [ 0.149135] pci 0000:00:1c.1: PCI bridge to [bus 05]
    [ 0.149137] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
    [ 0.149141] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc03fffff]
    [ 0.149144] pci 0000:00:1c.1: bridge window [mem 0xcdf00000-0xcdffffff 64bit pref]
    [ 0.149149] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.149151] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
    [ 0.149155] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc07fffff]
    [ 0.149158] pci 0000:00:1c.2: bridge window [mem 0xcde00000-0xcdefffff 64bit pref]
    [ 0.149163] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 0.149165] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
    [ 0.149169] pci 0000:00:1c.3: bridge window [mem 0xc0800000-0xc0bfffff]
    [ 0.149172] pci 0000:00:1c.3: bridge window [mem 0xcdd00000-0xcddfffff 64bit pref]
    [ 0.149177] pci 0000:00:1c.5: PCI bridge to [bus 02]
    [ 0.149179] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.149183] pci 0000:00:1c.5: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.149186] pci 0000:00:1c.5: bridge window [mem 0xcdc00000-0xcdcfffff 64bit pref]
    [ 0.149191] pci 0000:00:1e.0: PCI bridge to [bus 01]
    [ 0.149300] pci 0000:00:1c.1: enabling device (0106 -> 0107)
    [ 0.149344] pci 0000:00:1c.2: enabling device (0106 -> 0107)
    [ 0.149391] pci 0000:00:1c.3: enabling device (0106 -> 0107)
    [ 0.149480] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.149483] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.149485] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
    [ 0.149487] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
    [ 0.149489] pci_bus 0000:08: resource 1 [mem 0xfeb00000-0xfebfffff]
    [ 0.149491] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.149493] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
    [ 0.149494] pci_bus 0000:06: resource 1 [mem 0xfe000000-0xfeafffff]
    [ 0.149496] pci_bus 0000:06: resource 2 [mem 0xce000000-0xcfffffff 64bit pref]
    [ 0.149498] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
    [ 0.149500] pci_bus 0000:05: resource 1 [mem 0xc0000000-0xc03fffff]
    [ 0.149502] pci_bus 0000:05: resource 2 [mem 0xcdf00000-0xcdffffff 64bit pref]
    [ 0.149503] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
    [ 0.149505] pci_bus 0000:04: resource 1 [mem 0xc0400000-0xc07fffff]
    [ 0.149507] pci_bus 0000:04: resource 2 [mem 0xcde00000-0xcdefffff 64bit pref]
    [ 0.149509] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
    [ 0.149510] pci_bus 0000:03: resource 1 [mem 0xc0800000-0xc0bfffff]
    [ 0.149512] pci_bus 0000:03: resource 2 [mem 0xcdd00000-0xcddfffff 64bit pref]
    [ 0.149514] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 0.149516] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
    [ 0.149518] pci_bus 0000:02: resource 2 [mem 0xcdc00000-0xcdcfffff 64bit pref]
    [ 0.149519] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
    [ 0.149521] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
    [ 0.149551] NET: Registered protocol family 2
    [ 0.149702] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.149914] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.150119] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.150170] TCP: reno registered
    [ 0.150177] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.150207] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.150283] NET: Registered protocol family 1
    [ 0.151045] pci 0000:08:00.0: Boot video device
    [ 0.151052] PCI: CLS 32 bytes, default 64
    [ 0.151086] Unpacking initramfs...
    [ 0.205403] Freeing initrd memory: 3192K (ffff8800379b4000 - ffff880037cd2000)
    [ 0.205408] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.205410] software IO TLB [mem 0xbbfb0000-0xbffb0000] (64MB) mapped at [ffff8800bbfb0000-ffff8800bffaffff]
    [ 0.205520] Scanning for low memory corruption every 60 seconds
    [ 0.205777] audit: initializing netlink socket (disabled)
    [ 0.205789] type=2000 audit(1381318077.203:1): initialized
    [ 0.216800] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.218136] zbud: loaded
    [ 0.218245] VFS: Disk quotas dquot_6.5.2
    [ 0.218287] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.218444] msgmni has been set to 7909
    [ 0.218651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.218679] io scheduler noop registered
    [ 0.218681] io scheduler deadline registered
    [ 0.218706] io scheduler cfq registered (default)
    [ 0.218798] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.218859] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.218929] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.218996] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
    [ 0.219063] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
    [ 0.219131] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
    [ 0.219205] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    [ 0.219208] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
    [ 0.219209] pci 0000:08:00.1: Signaling PME through PCIe PME interrupt
    [ 0.219212] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
    [ 0.219227] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.219231] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.219245] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.219248] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.219264] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
    [ 0.219267] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
    [ 0.219281] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 0.219284] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 0.219299] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
    [ 0.219301] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.219304] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
    [ 0.219319] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.219334] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.219411] intel_idle: does not run on family 6 model 23
    [ 0.219445] GHES: HEST is not enabled!
    [ 0.219493] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.219891] Linux agpgart interface v0.103
    [ 0.219950] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.219951] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.220649] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.220734] mousedev: PS/2 mouse device common for all mice
    [ 0.220789] rtc_cmos 00:02: RTC can wake from S4
    [ 0.220893] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.220914] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.220922] cpuidle: using governor ladder
    [ 0.220923] cpuidle: using governor menu
    [ 0.220973] drop_monitor: Initializing network drop monitor service
    [ 0.221032] TCP: cubic registered
    [ 0.221122] NET: Registered protocol family 10
    [ 0.221283] NET: Registered protocol family 17
    [ 0.221292] Key type dns_resolver registered
    [ 0.221460] PM: Hibernation image not present or could not be loaded.
    [ 0.221470] registered taskstats version 1
    [ 0.221955] Magic number: 1:791:478
    [ 0.221958] rtc rtc0: hash matches
    [ 0.222029] rtc_cmos 00:02: setting system clock to 2013-10-09 11:27:58 UTC (1381318078)
    [ 0.223252] Freeing unused kernel memory: 1140K (ffffffff818c8000 - ffffffff819e5000)
    [ 0.223254] Write protecting the kernel read-only data: 8192k
    [ 0.226016] Freeing unused kernel memory: 1088K (ffff8800014f0000 - ffff880001600000)
    [ 0.226882] Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
    [ 0.232859] systemd-udevd[46]: starting version 208
    [ 0.246752] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.252157] ACPI: bus type USB registered
    [ 0.255682] usbcore: registered new interface driver usbfs
    [ 0.255694] usbcore: registered new interface driver hub
    [ 0.256505] usbcore: registered new device driver usb
    [ 0.257058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.257257] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.257356] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.257359] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.257365] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.257400] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a400
    [ 0.257536] hub 1-0:1.0: USB hub found
    [ 0.257540] hub 1-0:1.0: 2 ports detected
    [ 0.257589] ehci-pci: EHCI PCI platform driver
    [ 0.257721] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 0.257724] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.257729] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    [ 0.257756] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a480
    [ 0.258143] hub 2-0:1.0: USB hub found
    [ 0.258146] hub 2-0:1.0: 2 ports detected
    [ 0.258465] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 0.258468] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 0.258473] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
    [ 0.258501] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a800
    [ 0.258827] hub 3-0:1.0: USB hub found
    [ 0.258830] hub 3-0:1.0: 2 ports detected
    [ 0.258949] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.258952] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.258957] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 0.258983] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a880
    [ 0.259089] hub 4-0:1.0: USB hub found
    [ 0.259093] hub 4-0:1.0: 2 ports detected
    [ 0.259658] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.259661] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.259667] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
    [ 0.259687] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ac00
    [ 0.259869] hub 5-0:1.0: USB hub found
    [ 0.259873] hub 5-0:1.0: 2 ports detected
    [ 0.260344] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.260347] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.260352] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
    [ 0.260379] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000
    [ 0.260667] hub 6-0:1.0: USB hub found
    [ 0.260672] hub 6-0:1.0: 2 ports detected
    [ 0.260944] ehci-pci 0000:00:1a.7: setting latency timer to 64
    [ 0.261158] ehci-pci 0000:00:1a.7: EHCI Host Controller
    [ 0.261163] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
    [ 0.261173] ehci-pci 0000:00:1a.7: debug port 1
    [ 0.264982] SCSI subsystem initialized
    [ 0.265070] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
    [ 0.265075] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdefec00
    [ 0.266003] ACPI: bus type ATA registered
    [ 0.266050] libata version 3.00 loaded.
    [ 0.273402] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.273548] hub 7-0:1.0: USB hub found
    [ 0.273552] hub 7-0:1.0: 6 ports detected
    [ 0.296729] hub 1-0:1.0: USB hub found
    [ 0.296735] hub 1-0:1.0: 2 ports detected
    [ 0.320053] hub 2-0:1.0: USB hub found
    [ 0.320058] hub 2-0:1.0: 2 ports detected
    [ 0.343423] hub 3-0:1.0: USB hub found
    [ 0.343428] hub 3-0:1.0: 2 ports detected
    [ 0.343567] ehci-pci 0000:00:1d.7: setting latency timer to 64
    [ 0.343835] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 0.343841] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
    [ 0.343852] ehci-pci 0000:00:1d.7: debug port 1
    [ 0.347743] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
    [ 0.347748] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdeff800
    [ 0.356684] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.356806] hub 8-0:1.0: USB hub found
    [ 0.356810] hub 8-0:1.0: 6 ports detected
    [ 0.380056] hub 4-0:1.0: USB hub found
    [ 0.380060] hub 4-0:1.0: 2 ports detected
    [ 0.403389] hub 5-0:1.0: USB hub found
    [ 0.403394] hub 5-0:1.0: 2 ports detected
    [ 0.426723] hub 6-0:1.0: USB hub found
    [ 0.426728] hub 6-0:1.0: 2 ports detected
    [ 0.426798] ahci 0000:00:1f.2: version 3.0
    [ 0.426872] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
    [ 0.426883] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
    [ 0.426909] ahci: SSS flag set, parallel bus scan disabled
    [ 0.426936] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
    [ 0.426938] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ccc ems sxs
    [ 0.426942] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.460517] scsi0 : ahci
    [ 0.460589] scsi1 : ahci
    [ 0.460648] scsi2 : ahci
    [ 0.460701] scsi3 : ahci
    [ 0.460758] scsi4 : ahci
    [ 0.460817] scsi5 : ahci
    [ 0.460877] ata1: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff100 irq 46
    [ 0.460879] ata2: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff180 irq 46
    [ 0.460881] ata3: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff200 irq 46
    [ 0.460883] ata4: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff280 irq 46
    [ 0.460885] ata5: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff300 irq 46
    [ 0.460887] ata6: SATA max UDMA/133 abar m2048@0xfdeff000 port 0xfdeff380 irq 46
    [ 0.780019] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 0.781963] ata1.00: ATAPI: PIONEER DVD-RW DVR-217, 1.07, max UDMA/66
    [ 0.784240] ata1.00: configured for UDMA/66
    [ 0.785547] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-217 1.07 PQ: 0 ANSI: 5
    [ 0.956681] usb 4-2: new low-speed USB device number 2 using uhci_hcd
    [ 1.103354] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.103634] ata2.00: ATA-8: INTEL SSDSA2CT040G3, 4PC10362, max UDMA/133
    [ 1.103637] ata2.00: 78165360 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [ 1.103947] ata2.00: configured for UDMA/133
    [ 1.104039] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSA2CT04 4PC1 PQ: 0 ANSI: 5
    [ 1.134794] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.149089] usbcore: registered new interface driver usbhid
    [ 1.149092] usbhid: USB HID core driver
    [ 1.149496] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input1
    [ 1.149567] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
    [ 1.206680] tsc: Refined TSC clocksource calibration: 2841.455 MHz
    [ 1.423352] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.424774] ata3.00: ATA-8: WDC WD3200AAJS-22L7A0, 01.03E01, max UDMA/133
    [ 1.424777] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.425562] ata3.00: configured for UDMA/133
    [ 1.425655] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-2 01.0 PQ: 0 ANSI: 5
    [ 1.743351] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.744084] ata4.00: ATA-8: WDC WD3200AAJS-22L7A0, 01.03E01, max UDMA/133
    [ 1.744087] ata4.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.744873] ata4.00: configured for UDMA/133
    [ 1.744960] scsi 3:0:0:0: Direct-Access ATA WDC WD3200AAJS-2 01.0 PQ: 0 ANSI: 5
    [ 2.063351] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.063819] ata5.00: ATA-9: WDC WD30EZRX-00DC0B0, 80.00A80, max UDMA/133
    [ 2.063821] ata5.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 2.064291] ata5.00: configured for UDMA/133
    [ 2.064359] scsi 4:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 80.0 PQ: 0 ANSI: 5
    [ 2.206715] Switched to clocksource tsc
    [ 2.383347] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.385531] sd 1:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
    [ 2.385607] sd 1:0:0:0: [sda] Write Protect is off
    [ 2.385610] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.385649] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.385690] sd 3:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 2.385706] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 2.385715] sd 4:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
    [ 2.385717] sd 4:0:0:0: [sdd] 4096-byte physical blocks
    [ 2.385857] sd 4:0:0:0: [sdd] Write Protect is off
    [ 2.385860] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
    [ 2.385862] sd 3:0:0:0: [sdc] Write Protect is off
    [ 2.385864] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 2.385867] sd 2:0:0:0: [sdb] Write Protect is off
    [ 2.385869] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.385938] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.385943] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.385946] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.386246] sda: unknown partition table
    [ 2.386397] sd 1:0:0:0: [sda] Attached SCSI disk
    [ 2.387921] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.387923] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.388079] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 2.388790] sdc: sdc1 sdc2 sdc3
    [ 2.389077] sd 3:0:0:0: [sdc] Attached SCSI disk
    [ 2.392767] sdb: sdb1 sdb2 sdb3
    [ 2.393045] sd 2:0:0:0: [sdb] Attached SCSI disk
    [ 3.103026] sdd: sdd1 sdd2
    [ 3.103248] sd 4:0:0:0: [sdd] Attached SCSI disk
    [ 3.328321] device-mapper: uevent: version 1.0.3
    [ 3.328401] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected]
    [ 3.570255] bio: create slab <bio-1> at 1
    [ 3.571235] bio: create slab <bio-2> at 2
    [ 3.732817] bcache: bch_journal_replay() journal replay done, 668 keys in 45 entries, seq 59322
    [ 3.732923] bcache: register_cache() registered cache device sda
    [ 3.762888] bcache: register_bdev() registered backing device dm-2
    [ 3.776045] bcache: bch_cached_dev_attach() Caching dm-2 as bcache0 on set 47b2d6bd-5116-4b9b-b6d1-5349516f73d7
    [ 6.092288] EXT4-fs (bcache0): mounted filesystem with ordered data mode. Opts: (null)
    [ 6.303724] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 6.304542] systemd[1]: Set hostname to <ArchCC>.
    [ 6.366986] systemd[1]: Starting Emergency Shell...
    [ 6.367766] systemd[1]: Started Emergency Shell.
    [ 6.367791] systemd[1]: Starting Emergency Mode.
    [ 6.368010] systemd[1]: Reached target Emergency Mode.
    [ 6.368049] systemd[1]: Startup finished in 6.287s (kernel) + 80ms (userspace) = 6.368s.
    [ 6.370475] systemd[140]: Failed at step EXEC spawning /bin/plymouth: No such file or directory
    [ 61.843364] usb 4-2: USB disconnect, device number 2
    [ 63.476670] usb 4-2: new low-speed USB device number 3 using uhci_hcd
    [ 63.670262] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input2
    [ 63.670318] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
    [ 90.624321] systemd[1]: Cannot add dependency job for unit oss.service, ignoring: Unit oss.service failed to load: No such file or directory.
    [ 90.624327] systemd[1]: Cannot add dependency job for unit dkms.service, ignoring: Unit dkms.service failed to load: No such file or directory.
    [ 90.624337] systemd[1]: Cannot add dependency job for unit zramswap.service, ignoring: Unit zramswap.service failed to load: No such file or directory.
    [ 90.624371] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 90.624500] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 90.624547] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 90.624557] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s0.device...
    [ 90.624563] systemd[1]: Starting Remote File Systems.
    [ 90.624570] systemd[1]: Reached target Remote File Systems.
    [ 90.624578] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 90.624605] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 90.624612] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 90.624629] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 90.624636] systemd[1]: Starting Delayed Shutdown Socket.
    [ 90.624654] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 90.624661] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 90.624681] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 90.624688] systemd[1]: Stopping Emergency Mode.
    [ 90.624695] systemd[1]: Stopped target Emergency Mode.
    [ 90.624702] systemd[1]: Stopping Emergency Shell...
    [ 90.624708] systemd[1]: Starting Encrypted Volumes.
    [ 90.624713] systemd[1]: Reached target Encrypted Volumes.
    [ 90.624739] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 90.624808] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 90.624819] systemd[1]: Starting udev Kernel Socket.
    [ 90.624834] systemd[1]: Listening on udev Kernel Socket.
    [ 90.624844] systemd[1]: Starting udev Control Socket.
    [ 90.624860] systemd[1]: Listening on udev Control Socket.
    [ 90.624874] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 90.624905] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 90.624913] systemd[1]: Starting Paths.
    [ 90.624919] systemd[1]: Reached target Paths.
    [ 90.624926] systemd[1]: Starting Journal Socket.
    [ 90.624962] systemd[1]: Listening on Journal Socket.
    [ 90.624974] systemd[1]: Starting Setup Virtual Console...
    [ 90.651104] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 90.655011] systemd[1]: Started Set Up Additional Binary Formats.
    [ 90.655043] systemd[1]: Mounting Huge Pages File System...
    [ 90.655309] systemd[1]: Mounting Debug File System...
    [ 90.655567] systemd[1]: Mounting POSIX Message Queue File System...
    [ 90.655823] systemd[1]: Starting udev Coldplug all Devices...
    [ 90.657554] systemd[1]: Starting Load Kernel Modules...
    [ 90.657814] systemd[1]: Starting Journal Service...
    [ 90.658110] systemd[1]: Started Journal Service.
    [ 90.666498] systemd-journald[160]: Vacuuming done, freed 0 bytes
    [ 90.771093] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 90.771099] ACPI: Power Button [PWRB]
    [ 90.771140] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 90.771143] ACPI: Power Button [PWRF]
    [ 90.774558] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 90.774560] AMD IOMMUv2 functionality not available on this system
    [ 90.815171] systemd-udevd[180]: starting version 208
    [ 90.883394] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 90.883397] Disabling lock debugging due to kernel taint
    [ 90.893233] fglrx: disagrees about version of symbol __get_page_tail
    [ 90.893238] fglrx: Unknown symbol __get_page_tail (err -22)
    [ 90.893413] fglrx: disagrees about version of symbol put_page
    [ 90.893414] fglrx: Unknown symbol put_page (err -22)
    [ 90.919389] Monitor-Mwait will be used to enter C-1 state
    [ 90.919638] Monitor-Mwait will be used to enter C-2 state
    [ 90.919642] tsc: Marking TSC unstable due to TSC halts in idle
    [ 90.919650] ACPI: acpi_idle registered with cpuidle
    [ 90.920359] Switched to clocksource hpet
    [ 90.994920] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 90.996611] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 91.008007] r8168 Gigabit Ethernet driver 8.036.00-NAPI loaded
    [ 91.008114] r8168 0000:02:00.0: irq 47 for MSI/MSI-X
    [ 91.008659] eth%d: 0xffffc9001182a000, 00:19:66:d9:cd:9b, IRQ 47
    [ 91.008782] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
    [ 91.008787] r8168 Copyright (C) 2013 Realtek NIC software team <[email protected]>
    This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
    This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
    [ 91.034200] [drm] Initialized drm 1.1.0 20060810
    [ 91.050110] systemd-udevd[192]: renamed network interface eth0 to enp2s0
    [ 91.310749] [drm] VGACON disable radeon kernel modesetting.
    [ 91.310754] [drm:radeon_init] *ERROR* No UMS support in radeon module!
    [ 91.329569] fuse init (API version 7.22)
    [ 91.361527] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
    [ 91.373326] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60c
    [ 91.375131] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c
    [ 91.375542] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 91.402406] fglrx: disagrees about version of symbol __get_page_tail
    [ 91.402415] fglrx: Unknown symbol __get_page_tail (err -22)
    [ 91.402689] fglrx: disagrees about version of symbol put_page
    [ 91.402691] fglrx: Unknown symbol put_page (err -22)
    [ 91.415249] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 91.417097] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 91.417205] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 91.417301] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 91.417396] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 91.417491] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 91.417586] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 91.417680] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 91.419645] hda-intel 0000:08:00.1: Handle VGA-switcheroo audio client
    [ 91.419648] hda-intel 0000:08:00.1: Force to non-snoop mode
    [ 91.419686] snd_hda_intel 0000:08:00.1: irq 49 for MSI/MSI-X
    [ 91.425614] input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:01.0/0000:08:00.1/sound/card1/input13
    [ 91.425701] input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:01.0/0000:08:00.1/sound/card1/input14
    [ 92.042275] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 92.700040] systemd-journald[160]: Received request to flush runtime journal from PID 1
    [ 92.765670] traps: preload[259] trap int3 ip:321344f239 sp:7fff39828bc0 error:0
    [ 92.815737] Bridge firewalling registered
    [ 92.880024] device enp2s0 entered promiscuous mode
    [ 92.880040] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
    [ 92.884028] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
    [ 93.264560] systemd-journald[160]: Vacuuming done, freed 0 bytes
    [ 93.314902] systemd-journald[160]: Failed to write entry (25 items, 67875393 bytes) despite vacuuming, ignoring: Argument list too long
    [ 96.382118] systemd-journald[160]: Vacuuming done, freed 0 bytes
    [ 96.433003] systemd-journald[160]: Failed to write entry (25 items, 67875393 bytes) despite vacuuming, ignoring: Argument list too long
    [ 96.913912] r8168: enp2s0: link up
    [ 96.913929] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
    [ 96.914069] br0: port 1(enp2s0) entered forwarding state
    [ 96.914073] br0: port 1(enp2s0) entered forwarding state
    [ 96.914084] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
    [ 99.492442] systemd-journald[160]: Vacuuming done, freed 0 bytes
    [ 99.543312] systemd-journald[160]: Failed to write entry (25 items, 67875393 bytes) despite vacuuming, ignoring: Argument list too long
    [ 102.608297] systemd-journald[160]: Vacuuming done, freed 0 bytes
    [ 102.659200] systemd-journald[160]: Failed to write entry (25 items, 67875393 bytes) despite vacuuming, ignoring: Argument list too long
    [ 105.713454] systemd-journald[160]: Vacuuming done, freed 0 bytes
    [ 105.764352] systemd-journald[160]: Failed to write entry (25 items, 67875393 bytes) despite vacuuming, ignoring: Argument list too long
    [ 111.943355] br0: port 1(enp2s0) entered forwarding state
    [ 124.093369] usb 4-2: USB disconnect, device number 3
    [ 125.623338] usb 4-2: new low-speed USB device number 4 using uhci_hcd
    [ 125.815950] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input15
    [ 125.816032] hid-generic 0003:093A:2510.0003: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
    [ 141.250568] EXT4-fs (bcache0): re-mounted. Opts: data=ordered
    [ 146.343766] BUG: unable to handle kernel NULL pointer dereference at 0000000000000064
    [ 146.343868] IP: [<ffffffffa00124e9>] bch_insert_data+0x19/0x30 [bcache]
    [ 146.343936] PGD 0
    [ 146.343996] Oops: 0002 [#1] PREEMPT SMP
    [ 146.344111] Modules linked in: bridge stp llc coretemp kvm_intel kvm snd_hda_codec_realtek microcode snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc fuse snd_timer snd soundcore ttm drm_kms_helper drm i2c_algo_bit serio_raw r8168(O) i2c_i801 i2c_core shpchp intel_agp intel_gtt evdev mperf processor amd_iommu_v2 button ext4 crc16 mbcache jbd2 dm_mirror dm_region_hash dm_log dm_mod sr_mod cdrom sd_mod hid_generic usbhid hid ahci libahci libata scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common bcache
    [ 146.345772] CPU: 1 PID: 126 Comm: jbd2/bcache0-8 Tainted: P O 3.11.4-1-ARCH #1
    [ 146.345810] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./P45TS-R, BIOS P1.60 09/28/2009
    [ 146.345849] task: ffff880137d04bf0 ti: ffff880137596000 task.ti: ffff880137596000
    [ 146.345887] RIP: 0010:[<ffffffffa00124e9>] [<ffffffffa00124e9>] bch_insert_data+0x19/0x30 [bcache]
    [ 146.345954] RSP: 0018:ffff880137597ae0 EFLAGS: 00010246
    [ 146.345987] RAX: 0000000000000000 RBX: ffff880138b65fe0 RCX: 0000000000000000
    [ 146.346021] RDX: ffff880138b660d8 RSI: 0000000000000000 RDI: ffff880138b660d8
    [ 146.346055] RBP: ffff880137597ae0 R08: ffff880137597fd8 R09: 0000000000000000
    [ 146.346088] R10: ffff880137597fd8 R11: ffffffff811d4b49 R12: ffff8801375a8000
    [ 146.346122] R13: 0000000000000001 R14: ffff880138b66040 R15: ffff88013977b300
    [ 146.346155] FS: 0000000000000000(0000) GS:ffff88013fc80000(0000) knlGS:0000000000000000
    [ 146.346193] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    [ 146.346226] CR2: 0000000000000064 CR3: 000000000180d000 CR4: 00000000000007e0
    [ 146.346260] Stack:
    [ 146.346291] ffff880137597af0 ffffffffa0020b73 ffff880137597b50 ffffffffa00146fe
    [ 146.346437] ffff8801375a8010 8000000000000000 000000000dc40060 8000000000000000
    [ 146.346582] 000000000dc40068 ffff8801375a8010 ffff88013977b300 0000000000000001
    [ 146.346735] Call Trace:
    [ 146.346771] [<ffffffffa0020b73>] closure_queue+0x43/0x50 [bcache]
    [ 146.346807] [<ffffffffa00146fe>] request_write+0x25e/0x4e0 [bcache]
    [ 146.346843] [<ffffffffa0014b3c>] cached_dev_make_request+0x1bc/0x4a0 [bcache]
    [ 146.346884] [<ffffffff81262ea2>] generic_make_request+0xc2/0x110
    [ 146.346918] [<ffffffff81262f63>] submit_bio+0x73/0x160
    [ 146.346953] [<ffffffff811d4da6>] ? bio_alloc_bioset+0x196/0x2a0
    [ 146.346987] [<ffffffff811d0f43>] _submit_bh+0x143/0x240
    [ 146.347020] [<ffffffff811d1050>] submit_bh+0x10/0x20
    [ 146.347056] [<ffffffffa02d18ad>] journal_submit_commit_record.isra.10+0x19d/0x1c0 [jbd2]
    [ 146.347061] [<ffffffffa02d125b>] ? jbd2_journal_file_buffer+0x6b/0x110 [jbd2]
    [ 146.347061] [<ffffffffa02d2c28>] jbd2_journal_commit_transaction+0x1358/0x1d20 [jbd2]
    [ 146.347061] [<ffffffffa02d845e>] kjournald2+0xbe/0x240 [jbd2]
    [ 146.347061] [<ffffffff81084550>] ? wake_up_atomic_t+0x30/0x30
    [ 146.347061] [<ffffffffa02d83a0>] ? commit_timeout+0x10/0x10 [jbd2]
    [ 146.347061] [<ffffffff81083730>] kthread+0xc0/0xd0
    [ 146.347061] [<ffffffff81083670>] ? kthread_create_on_node+0x120/0x120
    [ 146.347061] [<ffffffff814e932c>] ret_from_fork+0x7c/0xb0
    [ 146.347061] [<ffffffff81083670>] ? kthread_create_on_node+0x120/0x120
    [ 146.347061] Code: fb ff ff 0f 0b 0f 0b 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 48 8d 47 68 55 48 89 47 60 48 89 e5 48 89 47 58 48 8b 47 40 <f0> ff 40 64 e8 4e fb ff ff 5d c3 66 66 66 2e 0f 1f 84 00 00 00
    [ 146.347061] RIP [<ffffffffa00124e9>] bch_insert_data+0x19/0x30 [bcache]
    [ 146.347061] RSP <ffff880137597ae0>
    [ 146.347061] CR2: 0000000000000064
    [ 146.349373] ---[ end trace 5e5e04e3d1ff201c ]---
    After that, shell can't access / and prompt freezed.
    then rollback to kernel 3.11.2 everything goes ok. any bugs on new kernel or my setting issue?
    Last edited by atmouse (2013-10-09 12:43:14)

    Gusar wrote:Bah, I was hoping you'd get b43 working. Worked for this person here: https://bbs.archlinux.org/viewtopic.php?id=130134
    Oh well, for you working wireless is probably more important than experimentation. I'll need to find myself a machine with new-ish broadcom wireless to play with . I only briefly had one a few months ago.
    I guess I am still using b43 firmware (aur/b43-firmware).
    It goes like this: Broadcom cards use special communication busses. In your case bcma; the other is ssb, it's used by older Broadcom cards. The kernel has bcma and ssb drivers to support these busses and it has the b43 driver for the wireless chips. So bcma+b43 (or ssb+b43) gives you working wireless. b43 is a reverse engineering effort, because in the past Broadcom was very non-opensource. But then Broadcom released their own opensource driver - brcmsmac. So now there's two drivers in the kernel supporting the same cards: bcma+b43 and brcmsmac. You have to blacklist either one or the other.
    Thank you for clearing things up... wiki material?
    I am marking this as solved.

  • Windows 8.1 Update Failure : We couldn't complete the updates, Undoing changes

    Yesterday I built my first computer and I installed Windows 8.1 on it, everything was running perfectly fine until today. This morning I had an update notification and I installed it, about half way through the update an error occurred and it said it couldn't
    complete the update and it was undoing the changes. I left it on that screen for about an hour and nothing happened. I tried finding what the update was, so I went to recently installed updates, and there was about 40 of them from just today. Whenever I tried
    to uninstall any of the updates, it said error, preventing me from deleting any of the updates. I was wondering if anyone could help me try to uninstall/re-install this update.

    Hi Kmanxx,
    The update failure might be caused by a variety of reasons such as connection issues, incomplete Components and firewall. For troubleshooting, specific error code of the failure update will be helpful.
    You also could find installation failure events and error code in log files, such as WindowsUpdate.log (C:\Windows\ WindowsUpdate.log) and CBS.log(C:\windows\logs\cbs\cbs.log). Here you first want to search for “error” in your logs. This will search for
    Error entries. Focus on the day the installation attempt occurred. Refer to your time line of update log, find what error happened. Of course you could post your log content and we’d like to give it a look.
    How to collect the specific error code of failure update:
    We can do this by viewing your update history.
    1. Swipe in from the right edge of the screen (or, if you're using a mouse, pointing to the lower-right corner of the screen and moving the mouse pointer up), and tap or click Settings.
    2. Tap or click Change PC settings, and then Update and recovery.
    3. Tap or click View your update history.
    View failed update error code.
    For your reference:
    Unable to install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2(also applies to Windows8.1):
    http://support.microsoft.com/kb/2509997/en-us
    If all updates fail to install on a particular client or if for example you cannot install a Service Pack:
    http://blogs.technet.com/b/roplatforms/archive/2011/04/28/installation-failures-cbs-store-corruptions-uncommon-issues-and-troubleshooting.aspx
    Fix Windows corruption errors by using the DISM or System Update Readiness tool:
    https://support.microsoft.com/kb/947821?wa=wsignin1.0
    Regards

  • Photoshop CS6 Update Failures  -  absolutely frustrated

    Once again, after completely removing the Web / Creative suite and re-installing (because we could not update when the last revision of PS came out)    we   have gotten an update failure on Photoshop CS6 Extended when the updater tried to apply the latest update - 13.0.4
    We examined the log files - once again its apparently looking  for PS language files that are not there ?    Seriously Adobe  WTH ?
    This insanity really needs to stop.    For one,  if Photoshop can only be licenseed in one language (in our case, English) why does the update look for all these other languages ? 
    1>   We've never uninstalled any OSX language or used any utility to remove languages or fonts 
    2>   We installed the  CS6 "fresh" - on a new machine and  fresh install of OSX
    3>   This happens on every machine we have, every time there is an update, it is absolutely infuriating we have to go through this every time.
    4>    It ONLY effects Photoshop - all the other Adobe apps update fine.  
    Is there ANY fix for this besides wasting another 2 hours re-installing and re-insalling all plug-ins ?
    Here is the contents onf the log file: 
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 28 error(s), 1 warning(s)
    ERROR: DW023: The extension payload: {15FB37DE-0C42-4C60-ACD3-45E136CCFFAE} Adobe Photoshop CS6 Hungarian Language Pack_13.0.4_AdobePhotoshop13-hu_HU 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Hungarian Language Pack_AdobePhotoshop13-hu_HU
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {2CCB171C-8FED-4DF1-900A-A4235D8E0040} Adobe Photoshop CS6 Norwegian Language Pack_13.0.4_AdobePhotoshop13-nb_NO 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Norwegian Language Pack_AdobePhotoshop13-nb_NO
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {31E0BB6C-FE09-495D-BEDE-6F3473827670} Adobe Photoshop CS6 IL English Language Pack_13.0.4_AdobePhotoshop13-en_IL 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 IL English Language Pack_AdobePhotoshop13-en_IL
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {3B4537F1-68AF-4061-A847-E2C6986ED902} Adobe Photoshop CS6 Korean Language Pack_13.0.4_AdobePhotoshop13-ko_KR 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Korean Language Pack_AdobePhotoshop13-ko_KR
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {3E23882F-4750-4548-843D-178BC1F834DF} Adobe Photoshop CS6 Czech Language Pack_13.0.4_AdobePhotoshop13-cs_CZ 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Czech Language Pack_AdobePhotoshop13-cs_CZ
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {3E6ADC58-9FEF-42B1-8BF4-A881BFF39E9F} Adobe Photoshop CS6 Spanish Language Pack_13.0.4_AdobePhotoshop13-es_ES 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Spanish Language Pack_AdobePhotoshop13-es_ES
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {50EE905C-9E11-4D2F-A90D-50E9F60AF47D} Adobe Photoshop CS6 German Language Pack_13.0.4_AdobePhotoshop13-de_DE 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 German Language Pack_AdobePhotoshop13-de_DE
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {51C0E161-8901-46B3-95FB-89E1AC3EC4C9} Adobe Photoshop CS6 AE English Language Pack_13.0.4_AdobePhotoshop13-en_AE 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 AE English Language Pack_AdobePhotoshop13-en_AE
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {54751220-7107-4EEA-AFE1-A404C4993C34} Adobe Photoshop CS6 North American Spanish Language Pack_13.0.4_AdobePhotoshop13-es_MX 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 North American Spanish Language Pack_AdobePhotoshop13-es_MX
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {73088CD1-4272-4776-9229-3B05BCE0842B} Adobe Photoshop CS6 Italian Language Pack_13.0.4_AdobePhotoshop13-it_IT 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Italian Language Pack_AdobePhotoshop13-it_IT
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {90B5470D-5115-4019-8B66-88E7C59E90A3} Adobe Photoshop CS6 Russian Language Pack_13.0.4_AdobePhotoshop13-ru_RU 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Russian Language Pack_AdobePhotoshop13-ru_RU
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {97C7709F-8794-489D-9EE6-E68D8510AAAA} Adobe Photoshop CS6 Swedish Language Pack_13.0.4_AdobePhotoshop13-sv_SE 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Swedish Language Pack_AdobePhotoshop13-sv_SE
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {A3B28D1A-DC4D-4365-832B-F17FEE8572F6} Adobe Photoshop CS6 MA French Language Pack_13.0.4_AdobePhotoshop13-fr_MA 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 MA French Language Pack_AdobePhotoshop13-fr_MA
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {AE6D3B4F-A4A7-4EA4-8344-F0FF5539254D} Adobe Photoshop CS6 International English Language Pack_13.0.4_AdobePhotoshop13-en_GB 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 International English Language Pack_AdobePhotoshop13-en_GB
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {B42E6B04-66F6-446E-A4AB-8D24D3FF9212} Adobe Photoshop CS6 Finnish Language Pack_13.0.4_AdobePhotoshop13-fi_FI 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Finnish Language Pack_AdobePhotoshop13-fi_FI
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {B56F84F2-AABB-4860-88B9-1A54CFFD2CD1} Adobe Photoshop CS6 Brazilian Portugese Language Pack_13.0.4_AdobePhotoshop13-pt_BR 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Brazilian Portugese Language Pack_AdobePhotoshop13-pt_BR
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {BC66696A-2C2F-4488-8075-627D7A69B473} Adobe Photoshop CS6 Turkish Language Pack_13.0.4_AdobePhotoshop13-tr_TR 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Turkish Language Pack_AdobePhotoshop13-tr_TR
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {C1132F98-CB10-494C-A09C-2FC72BEBEA16} Adobe Photoshop CS6 Chinese (traditional) Language Pack_13.0.4_AdobePhotoshop13-zh_TW 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Chinese (traditional) Language Pack_AdobePhotoshop13-zh_TW
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {C2B180C0-05C0-4757-94E8-BBCD5A222AA8} Adobe Photoshop CS6 Chinese Language Pack_13.0.4_AdobePhotoshop13-zh_CN 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Chinese Language Pack_AdobePhotoshop13-zh_CN
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {C896EA93-B9D3-4EDF-9637-CC45B7513273} Adobe Photoshop CS6 French Language Pack_13.0.4_AdobePhotoshop13-fr_FR 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 French Language Pack_AdobePhotoshop13-fr_FR
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {D8D3E251-3793-47E3-B3CB-88B0ED985F68} Adobe Photoshop CS6 Polish Language Pack_13.0.4_AdobePhotoshop13-pl_PL 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Polish Language Pack_AdobePhotoshop13-pl_PL
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {F006BCA5-F4F4-456B-B928-7AD8AA8252C0} Adobe Photoshop CS6 Japanese Language Pack_13.0.4_AdobePhotoshop13-ja_JP 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Japanese Language Pack_AdobePhotoshop13-ja_JP
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {F070D96E-C124-459D-9543-72ED7D201E5E} Adobe Photoshop CS6 Ukrainian Language Pack_13.0.4_AdobePhotoshop13-uk_UA 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Ukrainian Language Pack_AdobePhotoshop13-uk_UA
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {F16E3A78-7F89-44C1-91FB-C111823D0B4C} Adobe Photoshop CS6 Dutch Language Pack_13.0.4_AdobePhotoshop13-nl_NL 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Dutch Language Pack_AdobePhotoshop13-nl_NL
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {F2D5EF84-DE61-42AF-B21D-E21E13C1A8F8} Adobe Photoshop CS6 Canadian French Language Pack_13.0.4_AdobePhotoshop13-fr_CA 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Canadian French Language Pack_AdobePhotoshop13-fr_CA
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ERROR: DW023: The extension payload: {FD8AE12F-9B94-4A71-B334-6061D877D422} Adobe Photoshop CS6 Danish Language Pack_13.0.4_AdobePhotoshop13-da_DK 13.0.4.0 requires a parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS6 Danish Language Pack_AdobePhotoshop13-da_DK
              MinVersion: 0.0.0.0
              This parent relationship is not satisfied, because this payload is not present in this session.
              This payload will be ignored in this session.
    ----------- Payload: {D05F6C17-7D5C-47F8-B64C-927BCA844013} Adobe Photoshop CS6 Core_13.0.3_AdobePhotoshop13-Core 13.0.3.0 -----------
    WARNING: DW063: Command ARKPatchCommand failed.(Seq 419)
    ----------- Payload: {77B1BDEC-F7FB-4330-B9FD-180C0D22A757} Adobe Photoshop CS6 Core_13.0.4_AdobePhotoshop13-Core 13.0.4.0 -----------
    ERROR: DW063: Command ARKPatchCommand failed.(Seq 418)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Photoshop CS6 Core_13.0.4_AdobePhotoshop13-Core: Install failed
    Please search the above error/warning string(s) to find when the error occurred.
    These errors resulted in installer Exit Code mentioned below.
    [       0] Fri Jan 18 07:06:16 2013  INFO
    Exit Code: 6 - Silent workflow completed with errors.
    Please see specific errors and warnings for troubleshooting. For example, ERROR: DW023, DW063 ... WARNING: DW063 ...
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    END - Installer Session
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    Computer #1
    Interesting...  I rebooted the computer,   killed the installer / updater process  and manually installed the update and it took. 
    Computer #2 
    I deleted the installer,  and re-installed it (the installer) and it  still produced the language errors  but it also took, update successful.
    Computer #3
    Same as #2
    Conclusion =  Installer is buggy and has been for the past 3 releases of PS.    Make note to self,  manual install PS update from now on and save a lot of time.... 
    I do appreciate the reply. 

  • Adobe Acrobat 9.3.4 Update failure- "Error Applying Transforms, verify that the specified...

    I have ignored this issue for long enough.  I have Adobe CS4, with Acrobat Pro version 9.3.4.  Windows 7.  Acrobat updater pops up on my machine, and when I execute the update requested, the updater gives me the update failure message, with code 1604, "error applying transforms."
    I have seen solutions posted for this tranforms message, but it was a problem with Acrobat 8.  I have seen no solutions as of yet for Acrobat 9, so I thought I would post.
    I also tried opening Acrobat 9 Pro, and under the help tab, I initiated "repair".  I get the same transform error message as above.  Any advice anyone?  Should I just uninstall Acrobat 9 Pro and reinstall using my CS4 disk?
    Thanks for the help!

    If you have original CD with Acrobat installation, copy all files with extension .mst from this CD to the following location:
    C:\Program Files (x86)\Adobe\Acrobat 9.0\Setup Files\[ProductCode]   if this is 64bit system
    or
    C:\Program Files\Acrobat 9.0\Setup Files\[ProductCode]   if this is 32bit system
    where [ProductCode] is a unique value which identifies your language version of Acrobat 9 Pro.
    If this is EFG version, it should be {AC76BA86-1033-F400-7760-000000000004}
    If location does not exist, create it.
    2. If you do not have original CD and cannot find .mst files, provide the exact Product name including language and I will provide further instructions.
    Good luck

  • Windows update failures over the past several months

    I'm having the same issues regarding windows update failures as many documented in this forum. I have run the repairs recommended, drive scans, etc. with no success. I'm at the point that I think that it would be better to cut off the update notice. I have
    zipped up the files recommended and posted them on my skydrive site. That location is https://onedrive.live.com/?cid=C1221863E15FBC11&id=C1221863E15FBC11%211274.
    Please help. Joe Collins
     

    at the point that I think that it would be better to cut off the update notice.
    You may be right.  Try eliminating WU from a symptom description.  E.g. pick one of the updates which is available as a download and try installing it that way.  Just use WU as a guide for what you should download and install manually. 
    I imagine that if that works eventually WU will repair itself and realize that it doesn't need to do anything else for you.
    A search to support the idea of manual download and install acting as a workaround for this symptom:
    http://www.microsoft.com/en-us/search/results.aspx?q=0x800f0922%20CBS%20download
    <quote>
    Well, when I try to download Office 2013 updates, about 15 of them, they installed fine.
    </quote>
    Also
    http://social.technet.microsoft.com/Forums/windows/en-US/7060c961-3b7c-42ba-ad84-008c357478d8/installation-failure-windows-failed-to-install-the-following-update-with-error-0x800f0922?forum=w8itprogeneral
    (Microsoft search for
        [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
    Another suggestion which could be implied by your diagnostics would be to uninstall your Norton package (and any of the other interferers which are mentioned that would be suspect).  Norton is notorious for interference with updating and is also known
    to interfere even when it is supposedly disabled and is also known interfere even when it has supposedly been uninstalled, so who knows what the cause of the problem is, corruption or blocking, you could at least change your POQexec.log by taking such
    manual action.
    BTW what have you done exactly about trying to repair WU?  You could save yourself a lot of manual effort if you could get it working properly.  
    Otherwise, on the manual update tack I would try doing first the ones which arrive in pieces.  Search WindowsUpdate.log for  Downloading  for clues that way.
    Good luck
    Robert Aldwinckle

  • Wsa S160 accept usage control and web reputation filter update failure??

    end-user noticed there are some failure on the accept usage control and web reputation filter update. it show update /download failure on nov 11 and nov 14. I do check the update log it shows Mon Nov 14 14:45:11 2011 Info: Starting scheduled update Mon Nov 14 14:45:12 2011 Info: Scheduled next update to occur at Mon Nov 14 14:50:12 2011 Mon Nov 14 14:45:59 2011 Info: wbrs released download lock Mon Nov 14 14:45:59 2011 Warning: wbrs update failed but the new update shows "not available" . is this a eror or it is normal ?
    IF there is not new release for update, if I click update, will it report a update failure? or what else I can check?
    i checked the update log.
    Mon Nov 14 14:45:11 2011 Info: Starting scheduled update
    Mon Nov 14 14:45:12 2011 Info: Scheduled next update to occur at Mon Nov 14 14:50:12 2011
    Mon Nov 14 14:45:59 2011 Info: wbrs released download lock
    Mon Nov 14 14:45:59 2011 Warning: wbrs update failed
    Mon Nov 14 14:50:12 2011 Info: Starting scheduled update
    Mon Nov 14 14:50:18 2011 Info: Acquired server manifest, starting update 4966
    Mon Nov 14 14:50:18 2011 Info: Server manifest specified an update for merlin
    Mon Nov 14 14:50:18 2011 Info: merlin was signalled to start a new update
    Mon Nov 14 14:50:18 2011 Info: merlin processing files from the server manifest
    Mon Nov 14 14:50:18 2011 Info: merlin started downloading files
    Mon Nov 14 14:50:18 2011 Info: merlin beginning download of remote file "http://updates.ironport.com/merlin/masters-2.1/1453"
    Mon Nov 14 14:50:18 2011 Info: merlin waiting on download lock
    Mon Nov 14 14:50:18 2011 Info: merlin acquired download lock
    Mon Nov 14 14:50:18 2011 Info: Scheduled next update to occur at Mon Nov 14 14:55:18 2011
    Mon Nov 14 14:50:27 2011 Info: merlin released download lock
    Mon Nov 14 14:50:27 2011 Info: merlin successfully downloaded file "http://updates.ironport.com/merlin/masters-2.1/1453"
    Mon Nov 14 14:50:27 2011 Info: merlin started applying files
    Mon Nov 14 14:50:27 2011 Info: merlin applying file "merlin/masters-2.1/1453"
    Mon Nov 14 14:50:27 2011 Info: merlin restarting merlin
    Mon Nov 14 14:50:27 2011 Info: merlin verifying applied files
    Mon Nov 14 14:50:27 2011 Info: merlin updating the client manifest
    Mon Nov 14 14:50:27 2011 Info: merlin update completed
    Mon Nov 14 14:50:27 2011 Info: merlin waiting for new updates
    Mon Nov 14 14:50:59 2011 Info: wbrs started downloading files
    Mon Nov 14 14:50:59 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321069006.inc"
    Mon Nov 14 14:50:59 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:50:59 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:50:59 2011 Info: wbrs released download lock
    Mon Nov 14 14:50:59 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321069006.inc"
    Mon Nov 14 14:50:59 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321069341.inc"
    Mon Nov 14 14:50:59 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:50:59 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:50:59 2011 Info: wbrs released download lock
    Mon Nov 14 14:50:59 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321069341.inc"
    Mon Nov 14 14:50:59 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321070032.inc"
    Mon Nov 14 14:50:59 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:50:59 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:50:59 2011 Info: wbrs released download lock
    Mon Nov 14 14:50:59 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321070032.inc"
    Mon Nov 14 14:50:59 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321070355.inc"
    Mon Nov 14 14:50:59 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:50:59 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs released download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321070355.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321071157.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs released download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321071157.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321071469.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs released download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321071469.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321071901.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs released download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321071901.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321072452.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs released download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321072452.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321072766.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs released download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321072766.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321073089.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs released download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321073089.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321073407.inc"
    Mon Nov 14 14:51:00 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:51:00 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:51:01 2011 Info: wbrs released download lock
    Mon Nov 14 14:51:01 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321073407.inc"
    Mon Nov 14 14:51:01 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321074165.inc"
    Mon Nov 14 14:51:01 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:51:01 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:51:01 2011 Info: wbrs released download lock
    Mon Nov 14 14:51:01 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321074165.inc"
    Mon Nov 14 14:51:01 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321075094.inc"
    Mon Nov 14 14:51:01 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:51:01 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:51:01 2011 Info: wbrs released download lock
    Mon Nov 14 14:51:01 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321075094.inc"
    Mon Nov 14 14:51:01 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321075449.inc"
    Mon Nov 14 14:51:01 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:51:01 2011 Info: wbrs acquired download lock
    Mon Nov 14 14:51:01 2011 Info: wbrs released download lock
    Mon Nov 14 14:51:01 2011 Info: wbrs successfully downloaded file "http://updates.ironport.com/wbrs/ip/1321075449.inc"
    Mon Nov 14 14:51:01 2011 Info: wbrs beginning download of remote file "http://updates.ironport.com/wbrs/ip/1321075769.inc"
    Mon Nov 14 14:51:01 2011 Info: wbrs waiting on download lock
    Mon Nov 14 14:51:01 2011 Info: wbrs acquired download lock

    I think this happens occasionally, its not a big deal.
    Your box tried again, and eventually got update 5 min later.
    You may want to extend the time on this a bit to help performance... every 5 min does add some load.
    Support had me set mine at 8 hours...

  • VPN3005 BootCode 4.0 update failure : "flash erase failed"

    i become allways an BootCode 4.0 update failure "flash erase failed" !!!
    this is the second box (3005)with this behavior.
    vpn: Admin ->
    1) Concentrator
    2) Clients
    3) Bootloader
    4) Back
    vpn: Admin -> 3
    WARNING:-- Before beginning the bootloader upgrade, be aware of the following:
    o You must first download the latest bootloader from the Cisco website to
    your local disk and upload it to the device.
    o Before the upgrade, all network interfaces to the device are automatically
    shut down and restored afterwards. Because of this, you may want to warn
    users of the pending disconnect.
    o During the upgrade, reboots are automatically disallowed.
    o Do not power off the device during the bootloader upgrade process.
    Powering off the device will render it unusable.
    Do you really want to upgrade the bootloader? (Y/N) [N] Y
    Network interfaces are down ...
    64 06/14/2005 07:56:26.860 SEV=3 IP/2 RPT=11
    IP Interface 1 status changed to Link Down.
    List of Files
    CONFIG BOOT-IMG
    Name of the file for bootloader upgrade? BOOT-IMG
    Bootloader upgrade in process.
    This should take about 30 seconds.
    DO NOT POWER DOWN THE SYSTEM DURING THIS PROCEDURE!
    Bootloader update failure - The flash erase failed
    FATAL ERROR: Reboot will render the device unusable.
    Retry the bootloader update.
    DO NOT REBOOT until the update succeeds.
    Network interfaces are restored ...
    65 06/14/2005 07:56:32.680 SEV=3 IP/1 RPT=12
    IP Interface 1 status changed to Link Up.
    System Status
    VPN Concentrator Type: 3005
    Serial Number: CAM09200421
    Bootcode Rev:
    Cisco Systems, Inc./VPN 3000 Concentrator Series Version 2.5.Rel Jun 21 2000 18:57:52
    Software Rev:
    Cisco Systems, Inc./VPN 3000 Concentrator Version 4.7.Rel Mar 10 2005 14:58:16
    Up For 0:03:01
    Up Since 06/20/2005 02:22:21
    RAM Size: 64 MB (Memory Status: Green)
    Fan | Temperature
    Fan 1 Fan 2 | CPU Cage
    6027 RPM 5973 RPM 36C/96F 40C/104F
    CCO recommends to send in this box to Cisco ! but the new box from my reseller has the same problem / behavior !!!
    any idea ?

    I did the same thing, TAC support said they've had like 20 people complain about this. He said "there is no reason to update the boot code on a 3005 model. It is only needed on the 3015 and higher models to support RAM chips larger than 256MB." TAC support said DO NOT UPDATE the boot code on the 3005.
    I suggested that they make note of this SOMEWHERE in their documentation. He provided me with some hidden low-level commands to erase the boot code, but as he said the 3005 doesn't need v4 of the boot code, and the boot code hasn't been tested for it, it's possible it would just break the concentrator. He then added the only way to 'fix' a damaged boot code is to replace the entire unit. He suggested we not touch it anymore, and leave the boot code running as-shipped.

  • Global Correlation update Failure error

    Hello,
    I have received following error in IPS regarding global correlation update
    A global correlation update failed: ExecLoadCollabUpdate control transaction failed: Control transaction cannot be completed at this time
    is any one aware about this error? is it major issue and affecting IPS? I think this is because correlation update failure. Please let me know if any one has more information on this error

    Whenever a global correlation update fails, an evError event is generated. The error message is included in sensor statistics. The following conditions result in a status message with the severity of Error:
    •The sensor is unlicensed
    •No DNS or HTTP proxy server is configured
    •The manifest exchange failed
    •An update file download failed
    •Applying or committing the update failed
    For global correlation update fails, refer
    http://www.cisco.com/c/en/us/support/docs/security/ips-4200-series-sensors/50360-ids-faq.html

  • Global Correlation Update Failures

    I've recently turned on Global Correlation but we've failed to update every 5 minutes.
    PL-ASA-IPS# show stat global
    Network Participation:
       Counters:
          Total Connection Attempts = 2
          Total Connection Failures = 0
          Connection Failures Since Last Success = 0
       Connection History:
          Connection Attempt on February 16 2010, at 14:28:38 UTC = Successful
          Connection Attempt on February 16 2010, at 14:19:06 UTC = Successful
    Updates:
       Status Of Last Update Attempt = Failed
       Time Since Last Successful Update = never
       Counters:
          Update Failures Since Last Success = 4
          Total Update Attempts = 4
          Total Update Failures = 4
       Update Interval In Seconds = 300
       Update Server = update-manifests.ironport.com
       Update Server Address = 204.15.82.17
       Current Versions:
          config = 0
          drop = 0
          ip = 0
          rule = 0
    Warnings:
    I have a static NAT translation for the IPS, there are no proxy servers in our enviorment and it can ping outside as well as update-manifests.ironport.com (204.15.82.17). DNS is setup as well.
    In the logs I see this entry:
    16Feb2010 14:13:15.679 265.199 collaborationApp[491] rep/E A global correlation update failed: Failed download of ibrs/1.1/config/default/1236210407 : HTTP connection failed
    I guess I'm at a loss for what else I can check. We have no problems sending the Network Participation data but we can't get any data. Any suggestions?
    Cisco Intrusion Prevention System, Version 7.0(2)E3
    Signature Definition:
        Signature Update    S469.0                   2010-02-11
        Virus Update        V1.4                     2007-03-02
    OS Version:             2.4.30-IDS-smp-bigphys

    I have the same issue, i have no ASA or websense product between this device and the iNet.
    Does anyone have a fix or workaround?
    I have an AIM-IPS running 7.0(6)E4 with Signature versuon S599.0. All updates to date have been manualy d/l to a local ftp server
    the auto update "seems" to run but never gets any updates
    This is what i see
    # sh stat global
    Network Participation:
       Counters:
          Total Connection Attempts = 127
          Total Connection Failures = 127
          Connection Failures Since Last Success = 127
       Connection History:
          Connection Attempt on October 06 2011, at 10:46:32 UTC = Failed
          Connection Attempt on October 06 2011, at 09:24:32 UTC = Failed
          Connection Attempt on October 06 2011, at 08:03:04 UTC = Failed
          Connection Attempt on October 06 2011, at 07:59:52 UTC = Failed
          Connection Attempt on October 06 2011, at 06:36:57 UTC = Failed
    Updates:
       Status Of Last Update Attempt = Failed
       Time Since Last Successful Update = never
       Counters:
          Update Failures Since Last Success = 2702
          Total Update Attempts = 2702
          Total Update Failures = 2702
       Update Interval In Seconds = 300
       Update Server = update-manifests.ironport.com
       Update Server Address = Unknown
       Current Versions:
          config = 0
          drop = 0
          ip = 0
          rule = 0
    Warnings:
    #sh ver
    Application Partition:
    Cisco Intrusion Prevention System, Version 7.0(6)E4
    Host:
        Realm Keys          key1.0
    Signature Definition:
        Signature Update    S599.0                 2011-09-29
    OS Version:             2.6.14-Cavium-Octeon
    Platform:               AIM-IPS-K9
    Serial Number:          xxx
    Licensed, expires:      31-Mar-2012 UTC
    Sensor up-time is 9 days.
    Using 54726656 out of 454148096 bytes of available memory (12% usage)
    system is using 22.4M out of 80.0M bytes of available disk space (28% usage)
    application-data is using 46.8M out of 213.0M bytes of available disk space (23% usage)
    boot is using 54.4M out of 114.8M bytes of available disk space (50% usage)
    application-log is using 61.8M out of 513.0M bytes of available disk space (12% usage)
    MainApp            B-BEAU_2011_SEP_10_00_30_7_0_5_45   (Ipsbuild)   2011-09-10T00:32:09-0500   Running
    AnalysisEngine     B-BEAU_2011_SEP_10_00_30_7_0_5_45   (Ipsbuild)   2011-09-10T00:32:09-0500   Running
    CollaborationApp   B-BEAU_2011_SEP_10_00_30_7_0_5_45   (Ipsbuild)   2011-09-10T00:32:09-0500   Running
    CLI                B-BEAU_2011_SEP_10_00_30_7_0_5_45   (Ipsbuild)   2011-09-10T00:32:09-0500
    Upgrade History:
    * IPS-AIM-K9-7.0-6-E4       17:39:07 UTC Sat Sep 10 2011
      IPS-sig-S599-req-E4.pkg   07:59:08 UTC Wed Oct 05 2011
    Recovery Partition Version 1.1 - 7.0(6)E4
    Host Certificate Valid from: 25-Sep-2011 to 25-Sep-2013
    >
    as seen above there is no ip address listed for "update-manifests.ironport.com"
    NS lookup is able to resolve,
    why can't the IPS?
    I can i hard code the ip address?
    >Non-authoritative answer:
    >Name:    update-manifests.ironport.com
    >Address:  204.15.82.17

  • Really frustrating update failures. Slowed down my PC by 1000 times

    Hello, I've been using windows 8 from its beta days. But after upgrading to windows 8.1, every major update seems to fail. I've also looked into the history and tried installing them manually but it fails after the stage "copying packages to the windows
    update package". And if this isn't bad enough, my laptop takes about 20-25 minutes to shut down. It keeps showing "preparing updates, please don't turn off your computer". 
    I am getting really frustrated since there is nothing I can do about this. And this doesn't seem to be the first time, it happens every time there is a major update. 
    Also after this update failures, i seem to have other issues such as
    Wifi stops working after 5 minutes of youtube streaming
    chrome crashes more often than ever
    performance in general has been absolutely awful 
    None of these happened before. Also I do not have any viruses or malwares.
    Currently failed updates.
    KB2887595
    KB2919355
    Should i just downgrade back to windows 7? Or is there a permanent solution to this problem. 
    Also when I install the update manually, the error says "The system cannot find the path specified" 

    Hi,
    Are there any error code? please also check Windows\logs\cbs for the detailed information.
    for KB 2919255, this is a known update , we call it Windows 8.1 update 1, you can refer to this link ans see if it can help you
    http://windows.microsoft.com/en-in/windows-8/install-latest-update-windows-8-1
    You can also clear the software distribution folder, then install the updates again.
    At the Command Prompt type the following commands one at a time:
    net stop wuauserv   hit enter
    net stop bits     hit enter
    Now browse to the C:\Windows\Software Distribution folder and delete all the files and folders inside. 
    net start wuauserv     hit enter
    net start bits    hit enter
    Meanwhile, keep your windows uo to date before installing the two updates. KB 2919442 is the prerequisite to install KB 2919355
    Yolanda Zhu
    TechNet Community Support

  • Firmware Update Failure? Extreme help needed

    I was trying to update my ipod but when i tried to restore it, it suddenly stopped, then it said firmware update failure. No my ipod is screwed up again. This is the second time. The first time i sent it away and they gave me a new one, i followed the directions they gave on updating and restoring to windows settings, but now my ipod shows the apple, then the exclamation mark folder with a website below that. i need help cuz i don't want to send it away again.

    ok i think i may have just fixed it, and for all of you who may run into this problem. I just tried restoring it on my friends computer, and i think i fixed the problem.

Maybe you are looking for

  • Windows Vista x64 - Service Pack 2 - Premiere

    VISTA SP2 WARNING.. However, I installed SP2 last night and for whatever reason Premiere exits and closes it self out after about 20 seconds of LOADING on the screen. Just uninstalled SP2 and Premiere now works again..Whew! For whatever reason it cou

  • About essbase import to admin tool ,at logic layer have not the total layer

    i have import admin tool with a essbase . in the physical layer eg, a demention 'seg' it have the total layer then detail layer. but when i drag them to logic layer , demention 'seg' it have not the total layer just only detail layer. i must manual a

  • How if possible to save a file in iphoto after effects are added?

    im not sure i understand this app nor wish to in depth. I imported a 34 MB tiff and added effects. Wanted to save the file as is and exported it as a file. Noted straight lines across the bottom half of the image when i opened it. what is this due to

  • Photos turn fuzzy and won't stay Sharpened

    I'm having trouble with my images. They look great in iPhoto, even after I "save for web" in Photoshop. The problem is after I import them into iWeb, they look "fuzzy". I sharpen them with the sharpening slider (in the Adjustment window), and they lo

  • Deskjet 5740 won't scale to fit page; image off-center

    I am using HP DJ 5740 over network via Airport Express. Driver is "HP5700 Series, v3.1.1" Neither of my Macs can correctly scale an oversized document to fit the page -- the command seems to be ignored, the preview picture never changes, the result i