Update firmware and WLAN stop working
I update the firmware as suggested by the software update for N97 and since then WLAN cannot connect or start browsing. Have done the factory reset still no used and when try to define the Destination in come up with system Error. Nokia, why are you try to make our life a misery? you promise the update will benefit us and see what happened!! Anyone Please help.
I had a similar problem.
I still own an E61 and had a problem as it became "crazy" with all the lists being scrolled out (wherever I am ) continuously without beign able to stop it or to control anything!
So what I have done is reinstalled the frmware .
Since then I am not able to use my WLAN at all. No matter what I do I receive immediately "connection not available".
in the connection the existing Wifi spots are being seen but I am not able at all to even let the WLAN scan for existing Wifi or try to connect. The message is received immediately as I press the button!
Any help??
Similar Messages
-
Before I updated to Yosemite, I could FaceTime other people and Message other people with the MacBook Pro apps. However, after I updated to Yosemite, they stopped working. I get "not delivered" feedback on Messages, and "call failed" on FaceTime. I made sure that both have the correct emails checked and unchecked in the settings as my iPod, and made sure that the "make calls from" or "begin new conversations from" coincide with my handheld Apple media player.
Am I not doing something? Am I doing something wrong?
Any feedback would be appreciated!
Thanks!Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
Has anyone else had problems since downloading latest update? My iTunes stopped working and mobile device won't download, I now don't have Apple to backup my iphone?
As i've posted in this thread:
http://discussions.apple.com/thread.jspa?threadID=746408&tstart=30
I've tried everything others have suggested without any luck.
Now I'm stuck with a 300 bucks mp3 jalopy.
My big question here is :
why aren't we hearing from apple? why aren't they saying something like "yeah we messed things up but be patient. we are trying our best to fix it..." ?
I was thinking to buy the macbook pro but now I'm afraid of the day things will get messy with that too.
Pentium 4 Windows XP -
I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?
I have same issue. I click on the home button and Wake/sleep at the same time for 30 seconds or more and then the phone entered in Recovery mode. It is erasing my content now and installing the update. Let´s see how this ends. I have iCloud, iTunes match, and backups from previos versions, hope I can restore all my content.
Otherwise I´ll go to the Genius Bar to do a checkup.
Good luck!
It did not work the first time... The iPhone4 kept in limbo. Then I did disconnect as suggested above and tried again to enter in Recovery mode. This second time it works. And after restoring the iPhone4 with 7.0.3, it asked me if I want to recover from backup. I did recover from my latest back up and now it is syncing the content. -
My iPod 5 has recently updated to iOS 7.0.3. I have noticed something where my internet will only work for about 2-3 minutes and then stop working. It is not our internet, because all of our other appliances work completely fine. Any help?
I did not mean to click the "this solved my question button by the way.
I have tried most of this, except for a couople of things i currently cannot due. The apps that are acting up the most are YouTube an Vine. Facebook and Safari work fine. -
My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?
Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD -
How do I get my twitter to work? It's been working for ages now and as soon as the IO6.1 update comes out its stops working!
same issue here 6.1 messed up my iphone and ipad
-
Updated my 5S from 7.1.1 to 8.1.3 and camera stop working and flash! Help
Found my old phone and updated it and now my camera and flash stopped working. Worked fine in 7.1.1. Done everything from restoring to hard resets but nothing works.
Hi hardikfrompooler,
If you are having an issue with your iPhone's camera not functioning, I would suggest that you troubleshoot using the steps in this article -
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
if i used cracked version of IDM and after connecting to net it shows that update available so now my question is that if i update it will IDM stop working ?
hello, this is a support forum for the firefox web browser - we can't help you with this kind of request. if you don't want to spend money on the program, use a open & free alternative like the [https://addons.mozilla.org/firefox/addon/downthemall DownThemAll!] addon instead...
-
I updated my airport firmware and my Imac works fine, but my two Ipads won't connect to the internet now. How can I fix this?
Did you check your wifi settings and do a reboot?
-
I just updated firmware and it dosen't work.
I bought my router EA6500 and just updated firmware and it became a brick.The logo light keeps blingking and I can't even go into the setup.I downloaded the latest firmware and manually updated.It seemed went ok everything and said it's going to reboot but it went into this blingking mode.Is it because I did something wrong or it's because I bought a refurbished product.
Where was the firmware downloaded? Was it from the Linksys website? Resetting the router may straighten this up. Press and hold the reset button for 10 to 15 seconds. Then, reboot and reconfigure it. I'm not sure which version do you have but you may check it on the system label that is found underneath the device. Select the correct hardware version and download the firmware from this link. Once accomplished, reset again the router and configure it. If the same thing will happen, it's best to contact Linksys and have it replaced.
-
Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.
ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3." -
Hi Team,
Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
Regards
Sahil bhatejaHi，
So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers.
if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
Yolanda Zhu
TechNet Community Support -
X1 Carbon touchpad and trackpad stops working.
Received my new X1 Carbon 2014 this week. After only two minutes of use, the trackpad and toucphpad stopped working.
I hade to use an external mouse, and even after all driver updates it still didn`t work.
If I restart the machine, sometimes the track-touchpad will work, but suddenly it freezes up again (after only minutes of use), and I will have to restart to fix the problem. Have used it for 5 hrs now, and how probably restarted about 30-40 times.
Anyone know what is causing this problem and/or how I can fix it?
//alexSame issue here.
Bought my X1 carbon 20A7 last month.
The touchpad and trackpoint stop working after a while. Sometimes after minutes of use, sometimes after half an hour. When I close the lid, to let it go to sleep, and wake it up again they both work again. Another interesting (might be a coincedance) issue is that when I wake the laptop up after this has ocurred, the fingerprint reader does not work to log back on.
I have done a fresh install of windows 8.1 and updated all windows and Lenovo drivers.
I hope this gets solved quickly. It's kind of ridiculous for such a premium laptop.
Lenovo? -
Windows 8.1 Onboard Keyboard and Touchpad Stopped Working.
After upgrading to Win 8.1 my keyboard and touchpad stopped working suddenly. They both worked fine for the entire Windows 8.0 release. When I upgraded to 8.1, they both worked for about 3 months. Then what started happening is the computer
would freeze during the startup process.
Now they both don't don't work. But a USB powered mouse works. So with a USB powered mouse and the on screen keyboard I have been troubleshooting. I have removed the drivers from the device manager, reinstalled the drivers, searched for
driver updates etc. Nothing works.
Can someone please point me in the right direction. PC is kind of useless at the moment.Hi,
Kindly check this application that can show incompatible/unwanted/untrusted/ applications then remove these with different kinds of PC cleaner/Application removal tools.
http://www.getsysteminfo.com/
After Downloaded, Run the Application and Save Report, Upload the Report and Press Submit Button and Click Read the report as an Expert.
If you found anything in these 2 Auto analyses
then find the solution.
1) Driver To Update:
2) Application to Update:
Good Luck!
Maybe you are looking for
-
How can I export a slide from Keynote to iMovie HD?
I've tried to export a slide with animation into iMovie HD. The settings I'm using are 320x200, frame rate: 30 fps, Progressive, 16x9, Data Rate: Automatic. When I export and import into iMovie Hd the resolution is blurry and grainy. I initially trie
-
HT1296 Calendar no longer syncs after going to OS 10.8
Upgraded to OS 10.8 and can no longer get my iCal to sync with iPhone, can anyone offer a suggestion?
-
I have a report in which I am comparing two fact tables at month level. I have columns calculated at this level. One fact has all month entries and other does not have all. I need to show all the month values and measures in the report even if some m
-
Create a script to send as an pdf attachment alogn with logo
Hi, I am create a script program.how to send mail attachment with pdf fomat along with logo. can anybody helpme out. Thanks, Prathap.
-
Add integrated graphics to a laptop only with Intel graphics
hi i have hp 4530s with Product Number: xu015ut#aba. Can I add a graphics card to my laptop(ati or nvidia)? This question was solved. View Solution.