Update firmware SSD A-Data 537639-001

I have HP SSD A-Data 537639-001. And this ssd set in loader mode - disk have name JM Loader 001 ATA Device. And have capasity 4Gb, but original have 32Gb. I think need to update firmware. But where this firmware take?

Never really wanted to crack open the Mac Pro, but the original Radeon wasn't upto the job of running X-Plane or Digital Combat Simulator (DCS) in Boot Camp. The Pro is supposed to be my software development system. If I could be rid of Windows, I would. DCS is Windows only so I will have to knock together a PC.
A bit off topic... I also 'fly' X-Plane. A friend and I have built a flight simulator that works with X-Plane. A couple of concept drawings attached. Instead of hydralics we used pneumatic rams and quiet compressors. The simulator works very well and is great fun to fly. I am now writing the software to get the simulator to work with DCS.
Back on topic... Hopefully Apple will release a Mac Pro with SATA3, Thunderbolt, USB3, the ability to have multiple GPUs and use tech like SLI and PCIe 3. The Pro deserves a good overhaul.
In the meantime the Sonnet kit looks cool. I am liking the idea of a MacBook Air + Sonnet Echo + GTX670. If that would work(?)

Similar Messages

I have Lion on my 13" pro and have kept it up to date. Today I had a message about the need to update firmware. I pressed restart and there was language about the screen ging gray. I think it said for a few minutes. It has been 3 hrs. is this a problem?.

I got an alert to update firmware. When I click for restart a message the screen would gray and and it might ake a few minutes. That was about three hours ago and it is still gray and sitting there. Is this to be expected? What could/should I do? I am typing this on an ipad because the Macboob Pro is currently useless.

With Firmware updates, Apple will usually offer instructions to complete the update, since they require an additional step to complete. It sounds like you haven't finished the Firmware update completely.
Since it's your computer and investment, I wouldn't risk it and would visit your local Apple Store and let them solve the problem. In the meantime, read this link from Apple:
http://support.apple.com/kb/HT1557?viewlocale=en_US&locale=en_US
...to bring you up to date on the procedure.

How to update firmware for SSD Toshiba Air 2012

How to update firmware for SSD Toshiba THNSNS128GMFP ??
My disk see on system as SandForse 200026BB 33Kb

https://discussions.apple.com/message/22108992#22108992
https://discussions.apple.com/thread/5120950?start=0&tstart=0
https://discussions.apple.com/message/22649139#22649139
https://discussions.apple.com/thread/5300125?tstart=0
Seems to be a real issue. Here's to hoping Apple will address this issue sooner rather than later.

SSD's which are OK for updating firmware on a Mac?

I'm looking at a couple SSD's for a MacPro, any thoughts on which are OK with updating firmware on a Mac? Probably better to ask now before I need to..
Crucial M500 or Samsung 840 Pro? I'm assuming that OWC's offerings are probably the best for Mac compatiblity, any others?
thanks in advance.

Firstly there is a near identical question about setup of just days ago that hopefully you found and looked at in your research.
System on SSD / scratch for CS6 / projects
Lloyd's blog is full of tips: http://www.macperformanceguide.com
Start with what SSD (single) then get into multiple and setup and apps and how they are used, which really might be first thing to ask?
The Pro uses highest quality but both have much of the same controller and firmware - and it was just reviewed as to what the diference is. Find and read that.
Rick over on MacGurus setup an old working model for PS: a scratch disk + working project files is the fastest - was done with SCSI and then the first 10K SATA Raptor. Probably still holds true.
No you are not limited - I strongly suggest you set it up on Sonnet Tempo Pro RAID card and then use one 250GB 840 to start with, then add 2nd. Use one of the PCIe slots for your SSD(s). Maybe start with a 500GB.
Maybe use JBOD to combine two but not in RAID0.
The system can go on SATA II drive bay or optical bay.
Is there a one size fits all or to say this is the only way? of course not, you can though test and try and work with your budget, your Mac and move SSD to where it does the most good.
Samsung starts mass producing PCIe SSDs with 1400MB/s read speeds
When the new MacBook Air got the teardown treatment... a new SSD.
The new drive is known as the XP941 and Samsung will offer it in 128GB, 256GB, and 512GB configurations. It achieves read speeds of 1,400MB/s, which clocks it at 2.5x faster than a SATA SSD. It also only weighs 6 grams and measures 80 x 22mm. Samsung claims it only takes up a 7th of the space occupied by a typical 2.5-inch SSD.
SSD Maintenance
https://discussions.apple.com/thread/5012276
Samsung 840 Pro and Samsung 840 Solid State Drives Reviewhttp://www.xbitlabs.com/articles/storage/display/samsung-840-pro.html [06/07/13 | Storage ]
Samsung currently offers very interesting solid state drives. Some boast outstanding performance, others – are built with inexpensive TLC NAND and come with a very appealing price tag. And our tests prove all of this: we are ready to discuss what we saw when we got our hands on a Samsung 840 Pro 256 GB and Samsung 840 250 GB drives.
From last September, StorageReview article 840 vs 840 Pro - they were my favorite review site for storage for years.
http://www.storagereview.com/samsung_ssd_840_pro_review
Second only to TechReport
http://techreport.com/review/23990/samsung-840-pro-series-ssd-reviewed
X-bitlabs is also one of my popular stops and they look at Sandisk
http://www.xbitlabs.com/articles/storage/display/sandisk-ultra-plus.html
I am sold on Samsung though and feel the 840 will do fine for me, but I would use $$ to get Sonnet Tempo SSD or Pro from OWC.

Nokia n79 updated firmware 32.001 found GPS connec...

I'm update firmware 32.001 for nokia n79 and gps signals cannot be received.
The satellite signals usually open between 6-9 after firmware update enabled satellite just 1-2
Please update the gps section in the next version of firmware

Hi, I report a bug in this firware versión. I've n79-3 rm 350 NAM. The problem is cannot acces to menu route when the languague is set in Spanish: Tools > Settings > Applications > ---- (before here appears App Settings or some else). But, when the langague set is English, this option appears
GPS signal reception: sometimes is take too long lock the GPS signal.
Attachments:
CaptPantalla000012.jpg ‏12 KB
CaptPantalla000013.jpg ‏11 KB
CaptPantalla000014.jpg ‏9 KB

MSI X99S Gaming 7, Update firmware of HD in raid

Hi all,
I've got an MSI X99S Gaming 7, and I builded a raid maded by 2 HD Samsung 840 EVO, cause Samsung recently released an update of firmware for this HDs that fix some performance bug, I would like to apply it, but samsung Magician doesn't recognize HDs cause they are into a raid.
Is there a way to apply the firmware without destroy the raid?
Regards

Quote from: Nichrome on 30-May-15, 03:00:13
Firmware update/change is usually putting a device( In your case:SSDs) back to factory settings/conditions. So most likely you have to remove RAID, apply updates and recreate everything. Ask Samsung for perfect answer on this.
Umm....no. Not this at all.
SSD's are a bit different than motherboards. If updating the firmware on an SSD destroyed all the data on it, you would have a TON of very unhappy customers on your hands.
It will NOT reset it back to factory settings......I have never seen a case of an SSD firmware (that works properly....) that destroys the data that it holds. I have seen a few firmware updates where the data got destroyed because the firmware wasn't good and was not tested properly.
The big problem I really see here is the fact that you are using a RAID setup. I'm not sure how well it will take updating the SSD firmware, but I would imagine the data should be preserved.

E1200 V2 upgraded to OS 10.8.2, Cisco Connect unsupported OS, also update firmware?

I purchased myu E1200 Jan 2012. Have been intermittent loss of connection & not sure whether it is old cable modem or router or? ISP came out & checked & changed some cable fittings said looked ok, but could be my old modem. (I'm getting ready to move out of area so don't want to buy a new modem now). But also a lot of my neighbors w Cox report intermittent loss of connection.
I will get messages saying I'm not connected to internet. Usually if i go up & turn off wireless & then turn it back on, it will search & find my router. Frequently though I notice that when I check it has switched to my guest rather than primary for some reason.
I was having some of this before I even went to wifi a yr ago.
Just upgraded to Mountain Lion a couple weeks ago or so. Last night computer had a panic. I received advice to make sure all software as well as router firmware up to date. Found & updated MacBookPro Firmware update. Backed up.
Opened CiscoConnect & got message unsupported Operating System.
Reading about upgrading firmware, saw warnings about doing it hard wired or it could permanently damage router. Because of the intermittent connectivity problems & the warning, I think I would be safest to do this manually by downloading it 1st & then updating the firmware from the download.
I see that instructions say to determine Firmware version. & it also says it will ask for router IP address. I'm guessing all that was in Cisco Connect. I know it has my passwords, but now I can't get to it. It also says I can use the web set up page to get the current firmware version. For updates (but it says for pc) it shows 8/2011 & 8/2012. Since mine was purchased in 1/2012 & unless it self updated, I'm guessing it is running the 8/2011 firmware. But just noticed in the User Guide it says that when I run Cisco Connect it checks for updates & installs them. But that's kind of interesting w all the warnings about running it w a wired connection to make sure no interruptions. Not sure how I have it set up, but I usually set software updates to prompt me so I can control when they actually run.
Once I have gotten that, will I be able to manually download the appropriate firmware version? Or if I click on that, will that start a set up or update process?
If I download Cisco Connect, will it update the already installed version, keeping all my existing info? & then will that be compatible w Mountain Lion & then show me whether the firmware needs to be updated?
Kathi

But anyway, I can't even open the old version!!! I just get a message about unsupported OS! So kind of hard to uninstall if I can't open it.
& for some reason when I was installing Mountain Lion, upgrading from Snow Leopard it found an old version of Parallels which I knew was not compatible. Didn't even think about this.
Its sort of working but something is not working very well. I sure wish I hadn't listened to those who said to save the $ & not get the Apple Airport Express. Their stuff works & its not hard to set up like this!
This is SO LAME!!!
& Where is lists the info, I have so far found NO INFO about updating. I usually have my software set to notify me so I control when it updates. & I think the last times I was in Cisco Connect it was under pressure just trying to get the router working again.
Right now I feel like throwing it at something.
Well, I have twice tried to download from the list for my model & when I click on the set up icon I get a message that "Setup" is damaged and can't be opened. You shold eject the disk image." But when I click for more info it says:
The app has been modified or damaged
The app’s code does not match the original code that was signed. The app has been modfied, or it may be broken or corrupted or have been tampered with. If you feel that an app has been damaged or tampered with, you should delete it by dragging it to the Trash.
Some apps and tools, such as AppleScript applications and some legacy tools, modify themselves after signing. These types of apps cannot be opened unless the Gatekeeper settings in the Security & Privacy preferences is set to “Anywhere.”
Open the General pane of Security & Privacy preferences
For more information about protecting your Mac from harmful software, see this help topic:
Protect your Mac from malware
Kathi

Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error

After updating to Acrobat Standard and Readre 9.5.2, some (but not all) of my pdf files are now opening with the error "Insufficient data for an image." The files open, but they are fuzzy, pixelated and are missing the bates stamp I applied earlier (using a utility from LexisNexis Casemap). I can open the files fine on another computer with Acrobat Standard 9.5.1.
How can I uninstall the 9.5.2, or get it to work again?

Windows 7 64-bit with Samsung SSD on an i5 Lenovo laptop. Yes, I have both Acrobat Standard and Reader 9.5.2 on the machine. Both give the same error when opening the attached file.
-Dan-
[email protected]
Date: Thu, 16 Aug 2012 23:06:52 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error
    Re: Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error
    created by vamalik in Acrobat Installation & Update Issues - View the full discussion
Hi osieko,Can you share across any such sample pdf file? Also, what OS are you working upon?You have both Acrobat Standard 9.5.2 and Reader 9.5.2 installed on your machine. Right? One option that you can try is to repair your Acrobat/Reader from Programs in Control Panel and see if that resolves the issue.Otherwise kindly attach a screenshot of the error you are receiving along with any sample pdf file.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4627764#4627764
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4627764#4627764. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

New firmware m1217nfw release date and other questions ...

Hi everybody!
Does anybody knows when a new firmware update will be released? It seems that the latest release (2013-09-30, version 20130912) has a serious known issue and HP recommends : "Please do not update with this version" on the web site ...
The problem is that the version installed on my printer (version 20130211) seems to have a potential security vulnerability. The vulnerability could be exploited remotely to gain unauthorized access to
data! An intermediate firmware version (2013-07-26, version 20130703) was previously released to correct this issue but I can't find it on hp web site. Does anybody knows where I can find it???
My last question is about firmware update : HP recommends to update firmware by using an USB 2.0 cable connected to the printer. I successfully updated the firmware (twice) with the network interface of the printer. Should I avoid this method and use an USB 2.0 cable?
Thanks in advance for your reply.

You can't.
They did this for a reason, as part of FairPlay.
There's no way to get around this.....
If the information on the purchase content is wrong (like wrong release date), contact Apple, and they might be able to correct it.
Message was edited by: Kento Ito

What is defference between updating Firmware via P...

I'm N85 user and I want to know What is defference between updating Firmware via PC an Via Device manager on phone?

Firmware updates are usually released via one method or the other, rarely via both.
The NSU method downloads entire ROM images from Nokia's servers, resulting in downloads of more than 100MB in some cases.
The FOTA method only downloads what has changed from the version running on your phone to the latest version available. This means much less data to download, usually around 4-6 megabytes, which is important if you don't have access to a wireless network and have to use your operator's packet data service.
The FOTA method is safer (because it doesn't involve a computer running a notoriously flaky operating system) and faster (because there's less data to download).
Otherwise, the end result is the same.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Deciding to Update Firmware

Hi,
I've used the Nokia Firmware updater on my PC/Phone, and it worked pretty well. I have a few questions though, and I'm hoping someone here can help out...
Is the "Most Recent" firmware, version and date, listed somewhere? I don't want to have to hook up my phone and connect to the server to find out that I'm still up to date on the firmware. It would be great if there was a link that listed the date and version of the most current firmware for a given phone.
Second, is there a list of what the new firmware corrects? It would be nice to know what sort of changes to expect before invoking the firmware update, especially since there doesn't appear to be many utilities for rolling the firmware back if the new firmware behaves undesirably.
Third, is there a consolidated forum where we can make requests for changes to be included in future updates? Often times it doesn't really appear that questions and requests from the forums translate into changes in the product we have. It would be great to see a forum where we can make requests, or an area where polls could be conducted to see how many users are actually interested in a new or updated feature.
That's all from me. Thanks.
Dan

coachop94 you are obviously a man of great patience and in case nobody ever told you before, your advice is greatly appreciated.
Now just to clarify ... you state in your response that my computer is installing the driver ... this is not actually true, it is requesting the driver be installed however whether I point it at the original installation CD or whether I download and pre-run the driver from your link in the other thread ... it matters not, the driver itself will not load ... obviously the info bubble that states it has detected the Creative Zen Touch is simply getting this information from the USB device signature ... this then prompts for the above mentioned driver installation.
Now I am familiar with an old USB issue (or at least one I have not seen raise it's ugly head for sometime) whereby if you plug a USB device into a system and it does not have the exact driver for the device, then it will find a "closest match" driver, which invariabley will not actually do the job intended but will prevent the correct driver from being installed (Note to all: this is why we should always install drivers before we ever plug a USB device into our computers). To negate this issue I have uninstalled the device via device manager and then installed the driver from file prior to attaching the device ... to my horror, I still see the driver installation dialog once I attach the device.
What I am about to try is re-installing WMP0 (again via your linked thread) and see if, as you mentioned in your initial post, it NEEDS to be WMP0 ... lol ... I feel like a formula driver on about lap 0 of a 70 lap race :smileytongue:
[Edit] Maybe I should take to drinking Diet Dr Peppers too ... who knows what criteria Micro$oft have put in place :smileyvery-happy:

Unable to link incompatible devices. Please update all out of date devices

I just recently got the trio kit with two DM100's and the wireless controller.
Linksys Easy Link Advisor (LELA) does not install the controller, but it was able to be installed with most functionality manually. (running windows xp 64)
Right Now I am getting the error "unable to link incompatible devices. Please update all out of date devices" when I try to link my zones named Player1 and Player2 for party mode. When viewing details they show different firmware versions (1.7.3 and 1.23.31). I have tried to update, but they show up as completely updated in LELA.
How can I force a firmware upgrade? I did a search, and the help file was of no use. There is also no download available.
For the next gen of linksys home audio, how about a standard webconfig/telnet where I can define a static IP address for the wired and wireless connections? Eventually I hope to start up wireshark and see how this all works, because the system is cumbersome in its current state.
Solved!
Go to Solution.

Basically, Leave it powered on, connected to the internet over the weekend.
Another user also mentioned:
You can force the update to happen by using the Media Center Sofware.
   1. Open media center software
   2. Mouse over the DMP-100 player window and right click to expose menu
   3. Select About to see current firmware version and option to update.
I did this, and it updated...eventually. Took overnight (>3hours), and there was no user feedback/acknoledgment that the command had been received/processed/completed.

Idoc segment for updating Sales order item dates

Hi All,
I would ike to update the sales order item dates (loading date, Goods Issuance date etc) from an IDOC.
please let me know the Idoc segment and fields that need to be filled in?
Thanks in advance.
Regards,
Zeeshan.

Hi,
Here are some details of the segments in the idocs -
SEGNAM Segment Name E1EDL20
VBELN Sales and Distribution Documen 180001539
SEGNAM Segment Name E1EDL18
QUALF IDOC Qualifier: Control (Deliv PIC : Picking with flow records (inbound)
SEGNAM Segment Name E1EDL18
QUALF IDOC Qualifier: Control (Deliv PGI : Post delivery goods issue (inbound)
SEGNAM Segment Name E1EDT13
QUALF IDOC Qualifier: Date (Delivery 010 : Picking
NTANF Constraint for activity start 20090808
ISDD Actual start: Execution (date) 20090808
SEGNAM Segment Name E1EDL24
POSNR Item number of the SD document 10
MATNR Material Number 1112
WERKS Plant SG01
KDMAT Material belonging to the cust 1112
LFIMG Actual quantity delivered (in 55
VRKME Sales unit EA
POSEX External item number 10
ORMNG Original Quantity of Delivery 55
SEGNAM Segment Name E1EDL41
QUALI Qualifier for Reference Data o 001 : Purchase order data of customer
BSTNR Customer purchase order number 4500004668
BSTDT Customer purchase order date 10
POSEX Item Number of the Underlying 10
SEGNAM Segment Name E1EDL37
Regards,
Shamma

Nokia 5320 XM firmware bugs concerning date and al...

Hello!
Although already having twice sent in my Nokia 5320 XpressMusic for repair, I'm still suffering from severe firmware bugs concerning date and alarm of the device. Here some information on when and how the bugs are showing themselves:
Settings: A different weekly alarm is programmed for each day of the week. The phone is being switched off for the night.
The programmed alarm is being run correctly by the phone. The phone is being switched on after having disabled the alarm.
Some time later the date changes to four or five days in the future. Moreover the phone starts to ring for the day the date has changed to. Often it's not ringing at the time that has been programmed for that day, even though pretending to do so.
Example:
9:45 on Sunday: phone is correctly ringing at the programmed time.
10:15 on Sunday: phone is incorrectly ringing again pretending it was Friday 7:50
the clock remains unchanged, however the date has changed automatically for five days
Linked to this error, there seem to exist similar problems with date and snooze-function already mentioned on these forums:
/discussions/board/message?board.id=smartphones&message.id=145323
/discussions/board/message?board.id=smartphones&message.id=144139
/discussions/board/message?board.id=smartphones&message.id=143893
As I mentioned above, I already sent my phone in twice, however I always got it back with the mention: repaired on guarantee. To me, this seems rather disgraceful for Nokia. I sincerely hope, that, if necessary with the pressure of other users being concerned as well, we arrive to get a phone that is really working as one could await it from the leader in mobile phone production!
I hope we will be informed soon about when there will be a firmware update!
Thanks for your replies!
Regards,
Lorenz

Have the same problem, as I already mentioned in my posts too. But unfortunatly no reply from Nokia either. Seems they really don't care about it. It would be at least apropriate, that they at least announce time of new firmware and note if they will fix this problem with it.
But no replay from them I contacted local nokia dealer in Slovenia, but they just say they can not help. And that we must wait for new firmware.
Now I wonder, when it should came out ?! I am sick of this trouble with my phone. and as you said, I am also turning off my phone since I want my battery to last longer. so this bug must be fixed.
Nokia team, anyone?!?!?

Problem with updating Firmware

Nokia 3250.
At attempt to update firmware _Nokia Software Updater_ writes " Your phone software is up to date. If you want, you can reinstall it.
Nokia 3250 (RM-38)
Firmware version
Current: 3.24
Update: 3.24
As far as I know, last firmware version is 4.60
How I can update firmware up to version 4.60?
Help pls

I don't know, I'm not affiliated with Nokia at all.
You can ask/email Nokia on the "Contact us" page.
Feel free to hit the KUDOS button if you think I deserved it.........

Update firmware SSD A-Data 537639-001

Similar Messages

Maybe you are looking for