Update firmware version

Please will i have any problem if i put the version Beta 5.0 ?

Maybe. Presently it is only a beta and is only avaialbe to tester and developer's who have access tot he developer's forum. Some users have posted here saying that they installed the beta and had problem. This forum is only for released iOSs and we can't help with iOS 5.

Similar Messages

Nokia N79 will be geting new firmware Version v30....

Hi,
Nokia N79 will get new updated firmware Version v30.101 soon.
*lot of bugs fixed
*perfomance update...etc.
Solved!
Go to Solution.

Hi,
I connected my N79 yesterday on my PC with Nokia OVI.
It tells me that there was a firmware update and launched it.
But during this update, It tells me there was a USB connection problem and launched again the update......during 20 minutes to tell me finaly that there was again a problem.
So, now, I can't start my phone. When I push the power button, the screen lights on few seconds and stop.
I tried to to a hard reset (format) with the three buttons :
1/ 3 + * + green button
2/ Start button with the three button pushed
....but nothing hapens.
When I try to charge the phone, nothing hapens.
Thanks for yopur help.
Message Edited by kobayashi on 28-Oct-2009 03:38 PM
Nokia N8 RM-596 (SFR)
Code produit : 0599819
PR1.2
Version du logiciel : 014.002
Nokia MicroSD 16Go.

How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Will firmware version 4.1.7 automatically update to 4.1.9?

I recently upgraded to OS 10.3 from OS 10.0 on my Imac 700MHz G3. The installation documentation said that I would be prompted to upgrade the firmware if I needed to. I was not prompted so I went ahead and did the OS 10.3 installation. The firmware remained version 4.1.7f4 after the install.
Not too long ago I went through the same procedure on my Imac 400MHz DV. The only difference is that I started the upgraded process from OS 9.I, then to 9.2.2 using the updates (ending at the latest version of 9), then to 10.0, and then to 10.3. And finally updating with 10.3.9 combo to OS 10.3.9. During that whole process I never new about firmware and never checked to see what version I had before starting this process. After all of the above installations were finished I ended up with firmware version 4.1.9f1.
My concern is with the 700MHz G3 IMac. I'd like to update to 10.3.9 using the combo update but I'm concerned about the firmware. Will firmware 4.1.7f4 be updated automatically to 4.1.9f1 after the combo OS 10.3.9 is installed? Or should I erase the disk again and start over by first installing firmware update 4.1.9? Actually if that were the case I wouldn't be able to update my firmware since I don't have the correct bootable version of OS 9 on disk that is required for that computer. However my previous experience with the installations on the 400MHz DV suggests to me that that the firmware will automatically be updated. But I would like confirmation from the experts. I'd hate to spend all that time downloading and installing all of the latest updates (Combo 10.3.9, etc.) only to find that the firmware version is incorrect.
Thanks!
Al

Al,
I don't understand your anger. In your first message
you posted that you installed OS 9 and updated it to
9.2.2. So why don't you do that again on the 700 MHz
iMac?
I find it very amusing that somehow you see anger in my post. That is realy very funny! The reason I didn't just simply install OS 9 on the 700MHz Imac is stated in my original post. I would need a special (the original disk that came with this computer) bootable OS 9.1 disk to install 9.1 on this particular computer. However if there are retail 9.2 or greater disks available then that would work to. I own a retail version of 9.1 that I used for the 400MHz Imac. That wont work on the 700MHz Imac. So now I have to buy a another OS 9 disk. Thanks for your input. Al

Did the most recent update and now my TB Display turns off randomly on both my air and mini. I running TB Firmware Version: 23.6

did the most recent update and now my TB Display turns off randomly on both my air and mini. I running TB Firmware Version:
23.6

When did you get this firmware version? My TBD is at 22.2 and the TBD bus is at 23.4. I thought I had the latest firmware.

HT1218 3TB Timecapsule version 7.6.4 is CONSTANTLY losing WAN connection. Comcast is our carrier, and I've ruled out the modem as it downloads at 30mbs consistently. Want to try and update firmware of Timecapsule, but it will not display an "Update" ico

3TB Timecapsule version 7.6.4 is CONSTANTLY losing WAN connection. Comcast is our carrier, and I've ruled out the modem as it downloads at 30mbs consistently.
Want to try and update firmware of Timecapsule, but it will not display an "Update" icon.
Grrrrr.....makes me miss my stupid PC set up as I could force it to do what I want!
Intermittent connection screws up Netflix, VOIP phone, Amazon, Streaming music via Spotify/Pandora, general internet access.....whole family is ****** off.
Any tips/tricks/ideas???
dave

Downgrade firmware to 7.6.1 .. as the latest is just lousy.
It is easy to downgrade.. hold down the option key whilst you click the version number. in Macs.. lots of stuff is hidden behind an option key.
I also strongly recommend a factory reset and use all SMB names.. not apple type names..
ie TC name.. TCgen4
Wireless name TCwifi (or give names to both bands.. TC24ghz and TC5ghz).
That helps all the non-apple part of the world.. connect.
Also Mavericks has now changed over to SMB as well. So even Mac is now windows networking.
Generally these two things. .7.6.1 firmware and SMB names will fix it.. if not post again as is another step that is possible.. controlling the WAN speed of the TC.

How to downgrade my firmware version after a "succesful" update?

Dear Macusers,
Is there any way to downgrade my firmware version from 1.5.1 to a lower version? Even if my firmware update has been applied succesfully? I cannot use just the firmware restore CD because that is for an interupted or failed update.
Greetings,
Tim

Hello,
Many thanks for your reply. Yesterday I posted a topic about this problem with some more details. I hope this may help.
+"Since today my trackpad and keyboard doesn't response anymore. This problem started after I exit from sleep mode. Then I get a security form where I can enter my password, but I couldn't. So I restarted my macbook pro for about 5 times, removed my adapter and battery, but it doesn't work.+
+After that I went to iFactory and they said it is apparently because of my latest firmware update 1.5.1. But why does this happen a week after I installed this update? Anyway, he suggested me to downgrade my firmware version with a firmware restore CD. Well it sounded as an straightforward and easy solution until I read that the restoration CD doesn't work when the firmware update already has been applied correctly.+
+I have read some other topics about keyboard issues and some points are relevant for me:+
+I'm be able to use an external USB mouse and keyboard.+
+At system profile by USB, only my iSight, Bleutooth USB host controller and external USB devices are displayed.+
+The keyboard background light works properly+
+This problem happens all of a sudden without intervals or strange behavior.+
+Using Leopard (10.5.2) and Windows XP via bootcamp+
+I hope I can solve this problem really quick because I need my Macbook Pro badly for my study. Thanks in advance for studying my problem.+
Greetings,
Tim

I'am using iphone 5 i tried to update the ios 8.0.2 using the shift key in itunes update @ windows 8 i have the file which i downloaded, but it says that firmware version is not compatible. what can i do for it . help me friends

i'am using iphone 5, i tried to update the ios 8.0.2 using the shift key in itunes update @ windows 8 i have the file which i downloaded, but it says that firmware version is not compatible. what can i do for it . help me friends

Hello vinoth1986,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning update issues:
If you can't update or restore your iPhone, iPad, or iPod touch
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Can't update to the latest (v52) firmware version ...

Other people can update their software but I cannot, although we have the same Nokia device model. What's wrong?
Update availability is based on many things, including existing Nokia device firmware version, country, and operator. It may be due to one of these variables that your Nokia device isn't eligible for updates.
Please note that your mobile service provider, operator, or carrier may not have approved the latest Nokia device firmware available.
Nokia produces many different variants of each product (for different countries and languages) and not all variants have the latest Nokia device firmware. It is our priority to update all variants as quickly as possible, and we apologize for any delay. New software may become available at a later date, however, so please check again soon.
Is there any other way that I apply the new v52 update for my 5800 XM? Even if it voids warranty? Because I really hate my browser and music crashing, battery eating - from full to empty in ~1.5hour, meanwhile the phone is really hot and it is in stand-by - no programs running.
Info:
I am from Slovenia, my phone model is RM-356, current version V51.0.006 - installed on 19.11.2010. Language Slovene, 7. Serial - under the battery 0579282. Tryed updating via Wi-Fi on the phone, via PC - with "Nokia Software Updater", both said there is no new firmware available, while there is obviously.
Any help appreciated!!

I understand that this is a real bummer and painfull.
There is unfortunately nothin we can do to help you to get the most recent update if it ain't made available for your device.
From the power consumption, there could be an issue related to hardware which only a care point can fix.
However, you could back up what you need and perform a soft reset to wipe the phone memory, then install your apps one by one to check if there is an app or more causing this. You can also try to reinstall the fw with Ovi suite. Just connect and check if it's possible to do so, then back up your content and proceed.
I cannot guarantee that this will fix it, but it might be worth a try if youre without warranty.
Have you checked if there are a warranty checker tool available on your local Nokia site?
The Nokia browsers has always been a bit sensitive, so I suggest you download opera mobile or opera mini and install it on your phone memory (C: ) Should be much more stable.

Air update phone firmware version

How do you update phone firmware version?
1. Download Nokia pc suite and use NSU or Nokia ovisuite (For Windows User only)
2. Try over the Air update (MAC/Windows User)
If your mobile data rates allow, try doing an over the air update. Support varies by phone, variant and software
Go to tools >Utilities> Device manager (location may vary by device)
There should be an updates tab
This functionality may not be available in your device. Contact your service provider for more information
To view or update the current software version of your device or to check the date of a possible previous update, select Menu> Tools> Utilities> Device mngr
To check whether software updates are available select Options> Check for Updates
First off BACK UP YOUR DEVICE! make sure you have a back up of the memory card and also the device memory and make sure that the battery of your device has enough power or connect the chager before starting update. To start the update select access point. The device starts to download the device data.
When the data is downloaded the update description is displayed. Select Accept to accept the download of the update package or cancel to cancel the download. IT may take several minutes and you can use your device during the download but not during installation time.
Server Profile Settings
Menu> tools> utilities> Device Manager
to add a new server profile seleat Options> New server profile.
Contact your service provider for correct settings
Server name- Enter a name for the configuration server
Server Id- Enter the unique ID to identify the configuaration server
Server Password- Enter a password to identify your device to server
Access point- Select the access point to connect to the server
Host Address- Enter the url address of server
Port-Enter the port number of the server
User name & password- Enter your username and password for the server
Allow configuration- To allow receiving configuration settings from this server select yes
Auto Accept all requests-To have your device ask for your confirmation before accepting configuration from this server. Select NO
Network Authentication- Select if network authentication is used. Enter your Network username and Network password to identify your device to the server.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Like how did nothing happen >> no connection >> no message ??
CAN I UPDATE >>
http://europe.nokia.com/support/download-software/device-software-update/can-i-update
jje

Cannot update to Firmware version 4.1.108.32627 on ix4-300d

Just bought an ix4-300d with 4-3Tb drives. I cannot update Firmware to the latest version. After uploading to the NAS, when I click 'Apply' or 'Apply all pending updates", I see a message that says "The update file is being decompressed". After several seconds, I then receive dialog box that says, "Error – The software could not be updated."
Any ideas what the issue could be? Are there any log files to look at?
Current Version: 4.1.102.29716
Upgrade to: 4.1.108.32627

Hello dcsantis
Check the event log for any abnormal storage alerts such as degraded storage, recoverable errors, missing drive alerts, etc. Those sort of alerts could contribute to the firmware update issue.
Some basic steps to try for the issue:
Re-download the update file again and check the md5 checksum from the download page. If the checksum fails, try downloading from a different browser or computer and check it again.
Try uploading and applying the file using a different browser or computer.
Try re-seating all disks with the unit off, then try uploading and applying the update file again.
Try swapping disks 1 and 4 to opposite bays, then try uploading and applying the file again after booting.
LenovoEMC support should be contacted to create an incident if the above steps do not work.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Airport Ver 7.4.1 will not update firmware. Goes throught the process, reboots with the same firmware version. Power cycled the airport, did not help

Airport Ver 7.4.1 will not update firmware. Goes throught the process, reboots with the same firmware version. Power cycled the airport, did not help.

Please see the answer to your other post.

Having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

AirPort Utility in Mountain Lion will not support the older versions of the AirPort Express.....model numbers A1084 and A1088. Check on the side of the Express for the model number.
In addition, AirPort Utility in Mountain Lion will not support the older "round" or "dome" shaped versions of the AirPort Extreme.
Can you check to see how your devices might be affected?

After WRT310N Firmware Version 2 update - Unidentified Network

Hi
I've owned the WRT310N for over 2 years now. I've been happy with it's features thus far. I updated the firmware previously to 1.0.9.
Recently, I upgraded my OS to Windows 7 from Vista. It's great and connects to my other hardwired network device (i.e. printer) and internet without any issues. I chanced upon a review that said the WRT310N Firmware Version 2 (WRT310Nv2_0_00_012.bin) was out and eagerly upgraded it in the router. Herein came the problem after the automatic reboot. My internet connection was unidentified with gibberish for an IP address. Strangely, my printer still connects and prints. But I can no longer access the set up page typically found in 192.168.1.1. There are no issues with my modem.
I tried many things with the assistance of the Linksys hotline in the Philippines (ref case:100408-000629). Simple 5 seconds, 30 seconds, 1 min resets, press and hold, unplug power, replug in power - Result = 0.
I tried to force ipconfig to dump the ip address, it could not release it or renew it. I tried to lower the duplex speed to 10MBPS, doesn't work. I thought the problem was the gibberish was on IPv6, by deselecting it, IPv4 wasn't able to correct itself.
Long story short, it was a fatal mistake to install Firmware Version 2 as after the reboot, I couldn't access the internet or the set up page that was necessary to reset the factory defaults. Without entering the router set up page, I can't help myself.
The kind Linksys lady told me I'm out of warranty and there's pretty much nothing I can do except by the brand new WRT610n with XXXXX features. I don't think I would as I'm very concerned about upgrading future firmwares in the light of this experience. So I'm putting this case up for your review. Hopefully, I'm the only "unique" case. =(
E

Push and hold untill lights go off usually I hold for 30 seconds. You should also turn off and unplug your modem while you do this. After doing that you should reboot your computer and then see if you can access the router, if you can but still dont have internet then you might have to release/renew the DHCP untill you get an IP. Can find that on the status tab.

Since HUB 2 updated to firmware Version 8.1.H.U

Since HH2
Current firmware
Version 8.1.H.U (Type A)
Last updated
22/08/11
my PS3 has no longer been able to connect wirelessly. It keeps saying the Wireless key is wrong. I know the key is right because I can connect with another wireless device using the same key.
Thinking the PS3 was faulty I took it to another router (Buffalo) and it connected fine wirelessly. Its only the HH2 since it was updated on the 22 Aug 2011!!
Some help please BT?

Since HH2
Current firmware
Version 8.1.H.U (Type A)
Last updated
22/08/11
my PS3 has no longer been able to connect wirelessly. It keeps saying the Wireless key is wrong. I know the key is right because I can connect with another wireless device using the same key.
Thinking the PS3 was faulty I took it to another router (Buffalo) and it connected fine wirelessly. Its only the HH2 since it was updated on the 22 Aug 2011!!
Some help please BT?

Update firmware version

Similar Messages

Maybe you are looking for