Update for bios version 52kt30AUS - Lenovo Ideacentre K-210

Is there an update for this bios.

jbegnaud0163 wrote:
link is no longer valid
Try this link.......
https://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-k-series-desktops/idea...
***  The message thread you replied to is an old discussion.  My link to the BIOS update is for a newer BIOS version that was released after this discussion started.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Similar Messages

  • Where can I get an update for Mac version of Creative suite 5.5 Design Standard?

    Where can I get an update for Mac version of Creative suite 5.5 Design Standard?

    Should all be in this one place.
    Adobe - Creative Suite : For Macintosh
    Gene

  • Is there a recent security update for OSX version 10.6.8?

    Is there a recent security update for OSX version 10.6.8?

    I am getting more confused. I have Lion 10.7.5 and thought this would not be susceptible to SSL problem.
    I also took Lanny's advice and went to "gotofail.com" and it said I was SAFE.
    Can I assume I am OK?
    Also,i have an ipod 4g and went to the same gotofail, and it also said I am safe. I have not udated the security patch as do not have sufficient space (need 2.7gig) but someone suggested a  go around which I have not tried yet.
    I am accessing the net via a Veiizon jet pak, and not using open networks.
    Please comment

  • Updates for CS6 version 8 (NOT extended)?

    I can't find updates for CS6 version 8 (NOT extended). There are issues:
    Application Manager needed to be upgraded, done.
    When I open the prog and go to Help>Updates it opens my browser to Adobe, not to updates.
    I have uninstalled and reinstalled the prog.
    Same issue persists, mainly when using poly lasso tool. The prog won't let me make a full selection, it jumps and makes it's own selection.
    What a plethora of problems!!  
    Pls be patient with me as I have a broken brain now, and can't follow complicated instructions like I used to. The simpler, the better! Thanks.

    CS6 version 8 of WHAT?
    Tell me what application you're talking about and I'm move you post there.
    Bob

  • HT6146 i have remained on ios 6.1.3 on my iphone 4s and do not want to move to iOS 7.  what is the iOS security update for this version

    I use the iphone 4s and have not/do not want to update to iOS 7.  Currently i utilize iOS 6.1.3. What is the security update for this version?

    For iPhone 4s is iOS 7.0.6. Only one you can update to. iOS 6.1.6 is only for 3GS and iPod Touch 4th Gen

  • Apple software update for itunes version 11.0.1 will not update

    apple software update for itunes version 11.0.1 will not update says invalid signature and will not be installed?  how do i fix this?

    apple software update for itunes version 11.0.1 will not update says invalid signature and will not be installed?  how do i fix this?

  • Update for iTunes version 11.1.4.62

    Once again tried to install new update for iTunes and once again the version would not install.  Had an error code of MSVCR80.dll is missing.  Another error that stated there was a corrupted file.  Doesn't Apple test their updates?  Third time this has happened.  Usually I can go back to an older version.  For some reason after attempting a manual installation, no older version exists and I am wary that uninstalling and reinstalling iTunes will not erase my library.  Any suggestions? Thanks.

    Rip it up and start again. See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Is there any upcoming software updates for the version 10.5.8? Also how do I backup my mac?

    I really want to update my mac to the new version of Snow Leopard or Lion but to my understanding I must buy the disks to update it. However I feel like buying a macbook pro to my replace my mid-2009 white macbook, once I graduate so I could use it for college (which is 2 years from now and I'm saving up for it).
    Also how do I backup my mac (hardrive)? I'm quite lost. I'm told that I must use Time Machine, but how? Do I use a CD to back up? Some external drive and if yes where could I buy one?
    P.S. I'm a newbie with tech stuff. I'm no genius with it so I suggest to take it slow with me. PLUS there's no Apple Store here to help me out.
    My quetions in a nutshell:
    1) Upcoming software updates? *secretly wishes they were FREE*
    2) Backing up my hardrive?
    My Mac
      - Version 10.5.8 with a 2.13 GHz Intel Core 2 Duo

    The 2.13Ghz MacBook is a Mid 2009 model 5,2 http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.13-whit e-13-mid-2009-nvidia-specs.html
    There will be no updates for 10.5. it's been out of production for 3 years. You can order a Snow Leopard 10.6 install disk for $29 as long as you have at least 1gb of RAM and 5gb of free space on your hard drive.  http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
    You can upgrade from 10.5 to 10.6 with no problems. Any program that runs under 10.5 should run under10.6. See this list for compatibility with 10.6: http://snowleopard.wikidot.com/  You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any third party Power PC applications http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/ 
    To upgrade your iLife and iWork. If you only want iPhoto or other single apps from iLife '11 you can get them from the App Store after you've upgraded to 10.6.6. iPhoto, iMovie or Garage Band for $15 each and Pages, Keynote or Numbers from iWork '09 for $20 each.
    You can upgrade from 10.4 to 10.6 with no problems. Any program that runs under 10.4 should run under10.6. See this list for compatibility with 10.6: http://snowleopard.wikidot.com/  You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any third party Power PC applications http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/ 
    Once you are at 10.6.8 you can buy Lion for $29 from the App Store. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • Map updates for Symbian version of Nokia Maps/Driv...

    The last map update I had for my Nokia 808 is from back in April of this year.
    Is Nokia no longer providing map updates for the Symbian version of Nokia Maps/Drive software?
    This would be VERY disappointing if so.
    Please respond, and not ignore this question.
    thank you

    thanks!
    But sadly Nokia didn't even have the manners to respond in that thread either.. so there is still no answer.
    I just dropped $550 on a Nokia 808 Pureview, with the assumption that I will have good GPS software...
    Now Nokia is abandoning map updates for symbian?
    I will be outraged if this is the case..
    NOKIA please respond!!

  • HT5056 what if you have Mac OS 10.5.8? Will there be a software security update for that version or will I have to by the new version?

    is there  a software update for Mac OS 10.5  or will I need to download a newer version of the OS to insure that my Mac is safe?

    ...is there  a software update for Mac OS 10.5
    Yes. Apple just released the following
    Flashback Removal Security Update
    ...and a Flash-related update
    Leopard Security Update 2012-003

  • Osi update for older version iPad

    I have an older iPad, my osi version is 5.1.1 my apps are asking for an updated version to work now. How do I get an updated osi? My software update says this version is it? Help

    You mean iOS.
    If you have a 1st generation iPad, iOS 5.1.1 is the end of the line. Model Identifier Utility

  • Update for US Version of DW CS3

    Hi,
    Hey, is there a USA update for DW CS3 (v9), Wintell?  The only ones I see on the Adobe website are for Middle Eastern and Afrique du Nord on the Mac.
    Thanks
    Greg

    As far as I know, no.  I don't believe that the US/English version was patched.

  • Live Update 2 BIOS version

    Has anyone tried updating the BIOS on the Neo FIS2R via Live Update 2 lately? Is it still v1.2 or the new v1.4? And, did everything run okay during & after the update? Thanks!  

    Richard - Good news ... I finally have Windows recognizing all 128MB of video memory.
    Some body - I tried reinstalling mobo drivers and couldn't get it to work.
    AGP aperature is set to 64MB at the moment and it is working.
    It seems to me that something got corrupted in Windows and the registry was loading the nvidia drivers along with the msi drivers.  Also I found entries in the registry referring to my previous video card and I don't know if that contributed to the problem also.
    I ended up doing a clean install of the OS and it is working at the moment.  I check the adapter properties as I install software to see if there is something I'm installing that screws it up again.  So far so good.
    For anyone that is interested, here is what I did exactly:
    1. Format HD
    2, Install Windows XP Pro with SP1
    3. Intel chipset inf
    4. Intel application accelerator
    5. Downloaded/installed all updates available at Windows Update website (excluding drivers)
    6. Install Nvidia 43.45 drivers
    7. Install other device drivers
    8. Install software.
    I'm still need to install the remaining software, but at this time it looks like the problem is fixed.
    Richard - Thanks for your patience and all your help!!  I appreciate it!!

  • Security update for Bios 2.29 for T440 / T440s - what was the vulnerabil​ity?

    Hi,
    Can someone please share what the security vulnerability was for yesterday's bios?
    Version 2.29
    UEFI: 2.29 / ECP: 1.09
    (Fix) Fixed security vulnerability.
    (Fix) Fixed an issue that HDD partition data might not be captured by some UEFI application.

    Thanks for the input however I disagree. All security exploits should be exposed except under certain conditions.  Reading below, I do not believe it meets these conditions. This is what I found.  I would like to know what has been changed in case a security flaw affected my data etc.  To me it looks like they just don't want rollbacks of firmware as there was a security flaw in a previous firmware?
    - If the UEFI BIOS has been updated to version 2.29 or higher, it is no longer
    able to roll back to the version before 2.29 for security improvement.

  • Bios update failure - bios image needed - lenovo S10-3

    hello!
    i`m in big trouble now   
    I just have reinstalled win7 and thought that i have to install the driver AND to do a bios update. I dont know why, but now my netbook can't start up (display is off, blackscreen).
    Now i read some threads how to recover the bios, BUT i dont have a bios image (oh god, i am so stupid...).
    Is there any possibility to solve this problem? Maybe by getting a bios image from a other S10-3 user?
    Btw, my lenovo has the Atom N550, 1GB DDR3 Ram.
    Please help me. I am thankful for any advice.

    hi sasa22
    you can download the bios file from the link below. after downloading, right click and select 'extract files' to get the files you need.
    http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_show_2521.html
    hope this helps.

Maybe you are looking for

  • Thumbnail images of Thumbnail Slideshow Widget not releasing Tooltips

    I'm running Muse v2.2 Build 6 CL 770942 and had mistakenly assigned a number of tooltips to a number of thumbnail images of a thumbnail slideshow widget. After deleting those tooltips via the contextual menu on selected thumbnails and the "edit image

  • No services in Life and Work Events

    Hi SDN, I am working on Life and Workevents using note 929447. 1) I have copied all the folders and Processes. 2) Created Callable Objects pointing to Country specific objects. 3) Given default parameters as below sap.xss.service          EMPLOYEE_PE

  • Exception: cannot set unrecognized property:

    Hi guys, I am doing a PoC of Connection between BPEL PM 10.1.3.4 running over WLS 9.2 SP3 calling a HelloWorld WebService (a very simple one without authentication or security) that is deployed over a WLS 10.3 server. The problem is when I execute th

  • Does Logic 8 have an autosave option?

    Oh please say yes! When I worked with the far inferior Cubase VST, with OS 9, I could tell it to autosave once every minute. It didn't save over the main song. A special, autosave copy of the song was saved. This prevented so much work from being los

  • Perspective Grid improvements

    The new Perspective Grid feature is pretty nice... at first. But it quickly becomes almost useless as modifying the Grid after Objects are constrained to it does not re-orient the objects. What's the point? So if we get the Perspective Grid set up, a