Update for iTunes 11.0 causes Bose Portable Sounddock to not work
This morning my Bose Portable Sounddock stopped playing sound ... although it still charged devices. My iPod Touch runs iOS 4.2.1 (which is as far as it will update), my iPhone 4GS runs on iOS 6.0.1. They have always worked on my Bose Portable Sounddock, which is about 4 or 5 years old. However, after updating my iTunes software on my computer to iTunes 11.0, I connected both of my devices to the computer to add my Christmas Playlist ... Much to my dismay, my devices no longer had any sound when docked to my Bose!!! I tried many things, even going as far as restoring my iPod Touch. I tried turning everything off and then back on ... nothing. After about 2 hours, I finally called Bose ... WOW, were they ever helpful. Nick (how appropriate since Xmas is near) instructed me to reset the Bose Sounddock. With the portable unit, it required unplugging, then removing the battery, waiting 10 seconds, replacing the battery, plugging it back in and trying ... Voila! All is good and the sound is back. Maybe this will help someone having a similar problem. Definitely, it is worth a few minutes to try. Good luck all!
Did that and there were no errors shown at any point, such as when publishing the .apk file.
I found a solution. I was under the impression I needed to use touch events for it to work on a tablet, and changing those to normal mouse events solved the problem. Still not sure why it wouldn't work the other way, but for now it works as needed.
Thanks!
Similar Messages
-
Hi,
Two recent updates for my iPhone have caused crashes (down the white lead) via iTunes.
I have "fixed" but I don't know the cause?
Each time the update does n't complete.
The download does n't happen.
The computer & internet connection are good.
It is as if the Apple server does n't complete?
The phone stays in recovery mode, until you reset and rebuild in iTunes.
All software is up to date, but I can't find the cause
ANY IDEAS?
Regards,
P.
<Email Edited by Host>No error messages.
It just fails to complete the download, so recovery mode is the next step.
This can be over a period of eight hours or more!
I have so many (original) Apple USB leads that I would n't know if I have been using the same one (if it was faulty).
Does this sound like a "common" problem? -
I download latest updates for itunes and my iphone, when it comes to installing, it successfully downloads, but then i get a message for iphone software error=1403 file corrupted, and for itunes it downloads, then when i try to install it a message says unable to install software, file maybe corrupted!!
The iTunes update must be downloaded and installed before you try and use it to update the iPhone OS
Download iTunes 10.2.2 from here: http://support.apple.com/kb/DL1103
When it completes it will auto mount the disc image and show you the package installer, don't try and do anything with the file until it gets to this stage.
Once that's installed reboot the Mac, run iTunes, connect your iPhone and let it sync, then hit the update button and let it complete that step by itself (which will require a restart of the iPhone) -
Every time I try to install an update for iTunes 11.0.2, I get an error message 103. Has anyone else had this problem and found a way to fix this?
I did it the .dmg way alone and has problems with itunes crashing. This is a better way to ensure that there is not anything left behind to cause issues.
You need to backup your computer then uninstall I-tunes and reinstall itunes.
Delete iTunes
Deleting iTunes is not recommended unless you know what you’re doing.
Launch Terminal from the UTILITIES within Applications
Type the following commands:
cd /Applications/
This brings you into the Applications directory, the next command deletes iTunes itself:
sudo rm -rf iTunes.app/
Enter the Administrator password to confirm
There is no warning or confirmation other than entering the admin password, iTunes will immediately be deleted, effectively uninstalling it from the Mac.
Deleting the iTunes application will NOT delete the ITUNES or music, and any purchases bought through iTunes will still remain tied to the Apple ID used to originally buy them.
You can download the newest version from Apple, and running their installer will bring iTunes back to life on your computer.
http://www.apple.com/itunes/download/ -
While downloading software update for Itunes, got message saying detecting Ipad in recovery mode and telling us to restore Ipad to original settings, which we don't want to do. Also cannot turn on Ipad; shows Itunes symbol with connector. Help!
No promises but a System Reset is worth trying:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162. Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
http://support.apple.com/manuals/#ipad
Finally, the User Guide can be downloaded at no charge via iBooks and a less comprehensive version of the Guide is included as a Safari bookmark. -
My daughter had an update for itunes which she did. She said that there was also an update for ipod but it had told her it failed. However, now when she connects USB cord it tells her she must restore. I am assuming that it updated to IOS 6. Is she going to lose everything on the device if she goes ahead and restores it? She does not have anything backuped in the cloud as she was not aware that this update would cause this issue.
If her iPod was backed up, she will lose the data on the iPod, but it could be restored from the backup.
-
With the new updates for iTunes, I can no longer print a CD case playlist when I burn a CD. It prints in a jumbled mess. I have reinstalled, updated, run diagnostics on my NEW printer, I am out of ideas!
It appears to be a bug with the current build. Hopefully it will be fixed in the next release.
tt2 -
Update for iTunes version 11.1.4.62
Once again tried to install new update for iTunes and once again the version would not install. Had an error code of MSVCR80.dll is missing. Another error that stated there was a corrupted file. Doesn't Apple test their updates? Third time this has happened. Usually I can go back to an older version. For some reason after attempting a manual installation, no older version exists and I am wary that uninstalling and reinstalling iTunes will not erase my library. Any suggestions? Thanks.
Rip it up and start again. See Troubleshooting issues with iTunes for Windows updates.
tt2 -
When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I accepted a recent update for iTunes and now my version of Spin Doctor can't communicate with iTunes, specifically, I can't get music files to go over to iTunes. Spin Doctor gives me a message indicating that iTunes isn't working properly.
I am using iTunes 9.1.1(12) and Spin Doctor 3.1.1.304t. I have investigated upgrading the Spin Doctor but I think too much time has passed and the version available are too far advanced.
Any ideas? Can I undo the iTunes upgrade? Is there a website that I can go to to get the upgrade for my Spin Doctor?
Thanks.
MaryIf your iMac is an Intel CPU model, you can upgrade the OS to OS X 10.6 Snow Leopard.
Then use software update to update 10.6 Snow Leopard to OS X 10,6.8.
Then you can run the latest iTunes to sync your iPad running iOS 6
You can purchase OS X 10.6 Snow Leopard by calling Apple at 1-800-MYAPPLE. Ask for retail software sales and purchase a copy of 10.6 for $19.99 plus shipping. -
I have windows 7 and I have been trying to install the newest update for itunes and quicktime but I keep receiving the same Bonjour error. I even tried to do it manually and no luck. I also tried to unistall bonjour but it would not even allow me to unistall it either. No matter what I do I get the same error listed below:
The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
I would greatly appreciate any help because this appears whether i am trying to install the updates or remove bonjour to reinstall. I am stuck.
Thank You in advance!!!The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time? -
i have a laptop mac 3 years old i did not pay the extend warranty plan, so know i can't update the iPhone 5 because thai do not accepted a update for iTunes the new version what i have to do call to apple or make repair
You need to be running Mac OS X 10.6.8 or newer to sync the iPhone 5; this may require buying a Mac OS X 10.6 DVD from the online Apple Store. OS upgrades aren't covered by the warranty.
(77198) -
I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll. error 7 (windows error 126). Anyone else having this issue? How do I get iTunes back in working order?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I just got an iPod shuffle yesterday and I have downloaded the latest update for iTunes (10.7) and when I plugin it in it says that I have not got the correct software for the iPod
What is the exact error message you are receiving? Have you checked to make sure the connections on each end of the USB cable are nice and snug?
B-rock -
Why will iTunes not sync to my iPod after installing the latest update for iTunes?
Hi I have a Macbook and I just downloaded the latest update for iTunes and when I plugged in my iPod to sync I keep getting and error message. How do I fix this problem?
I haven't done one of those for a while. But the following troubleshooting document might still be worth a shot:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Maybe you are looking for
-
Can no longer print from Airport Express
I have an Airport Express base station model A1084 that had been working fine. I have a printer attached to it that did work, but now whenever it is used it shows offline. The Airport is connected to a DLink DGL-4100 router which is connected to a ca
-
is flushBuffer() of HttpServletResponse flush contents of respose to client immedialty when it is called ?. My problem is like this, I am uploading files from an application to a servlet throgh Httpurlconnection. In the servlet i m reading the conten
-
Handling multiple EDI transaction
Hi, We are getting multiple EDI transactions (940, 850 etc) from our customer. I have defined one Sender Agreement with service interface as functional acknowledgment and one each for EDI transactions (with service interface 940 and service interface
-
Missing files in discovrer plus lib
I have installed oracle bi and the discovrer plus when loading in a java applet is failing because it is unable to find the following class file load: class oracle.disco.DiscoApplet.class not found the file that was downloaded was as_linux_x86_bi_101
-
Hi, Can any body tell me the way how i need to upload storage bin data. which tool would be better whether LSMW or BDC and whether SCAT can be used? say for example we have 50,000 bins. i am requsting an urgent reply. If u have any screen sho