Update: Found Waveburner, 10 minutes later, created 4 song CD as wanted (with timed pauses inserted, normalized, as needed, etc). A cool tool. Who do I thank? Thank all of you. Sorry if I failed to award "points" properly. You know who you are!

Update: Found Waveburner (had to download Logic... again), 10 minutes later, created 4 song CD as wanted (with timed pauses inserted, normalized, as needed, etc).
A cool tool.
Who do I thank?
Thanks to all of you.
Sorry if I failed to award "points" properly.
You know who you are!
I'll be better next time. I won't use space for messages like this (only questions).

I have a few co-writes I get mailbox money for (enough $ to remind me that I am a "song" writer).
I am a visual artist for the most part.
What I am working on musically, primarily, are longer-playing instrumental pieces. Today I'm working on mix of one for my new website (it will accompany a video that was shot and edited by an award-winner...). So music will play when my art video is playing.
Some of my paintings (cropped) can be seen on my user profile. The art will give you an idea as to the music, perhaps?
I am looking forward to using Logic for adding my music to films of my visual art I shoot, but that is another day. (Hopefully any software I need will be easily found, then!)
Can I hear your music online?

Similar Messages

Since the Nov update about a third of my songs have a circle with an exclamation mark inside it. These song will not play on my computer. I reload with my own cd collection, it works for a while then the same thing happens. Message says "Song could not be

Since Nov update about a third of my songs have a circle with an exclamation mark inside the circle. These songs will not play on my computer. Message says "The song .... could not be used because the original file could not be found. Would you like to locate it?" I have reloaded these back onto itunes with my own CD collection. They work for a short while, then the same thing happens. I don't know what is causing this or how to fix it.

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

Hi...my last updating software was with 4.2.1 and today I updated new software 4.3.5 and im not happy with more strong vibration ,Can apple consider it and restore the previous settings of vibration.Thank you

Hi...my last updating software was with 4.2.1 and today I updated new software 4.3.5 and im not happy with more strong vibration ,Can apple consider it and restore the previous settings of vibration.Thank you

Apple isn't here.
This is a user to user forum.
Allan

I tried getting my music off my ipod onto my new laptop and it got rid of all my music except 5 songs and came up with files such as F00, F01, F02 etc

I tried getting my music off my ipod onto my new laptop and it got rid of all my music except 5 songs and came up with files such as F00, F01, F02 etc
WHAT SHOULD I DO

Use the backup of your computer and put the songs back on. If these are iTunes songs you can download them again on your computer and sync the nano.

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
Could any one help me out of this?
Thanks,
Rajesh

See this discussion...
https://discussions.apple.com/message/23731048#23731048

Five minutes later"this song can no longer be made into a ringtone"

I downloaded a song that had the bell next to it. Five minutes later, it's downloaded, and I click the bell icon to make my ringtone. A box popped up that said "this song cannot be made into a ringtone- this song can no longer be made into a ringtone"
What's up with that??? I already had this song in my library. I only downloaded it again so that I could make the ringtone, and now it won't work. Anybody know what to do??
Thanks, Kelly

I am having the SAME issue - I just bought a song 2 days ago that clearly had the bell icon next to it. Right after downloading the song I clicked "create ringtone" and received the same error message "this song can no longer be made into a ringtone". SO I called iPhone - they can't help...so I emailed iTunes and I am getting the total run around. I clearly explained this issue to which they have replied with FAQs on ringtones and articles on how to download ringtones, duh. I re-authorized my computer, restarted it, on and on...still nothing. It seems like iTunes support wants to ignore my true problem and just keep running me around in circles.

I lost my phone and i know who steel it ,how can i get it back??, I lost my phone and i know who steel it ,how can i get it back??, I lost my phone and i know who steel it ,how can i get it back??

I lost my ihpone5 and i know who stole it,how can i get it back??

When you went to the Police & filed a complaint that someone stole your phone, & you knew who it was, what did they say?

TS4062 i cannot sync all the songs/artists i want with i tunes I am getting the message "The song could not be used because the original file could not be found would you like to locate it" but it cant... most of my music on i tunes is now saying this I h

Help I cannot

Hello Imelda2
You would need to locate those songs on your computer. Check out the article below for tips on how to locate the files and relink them.
iTunes: Finding lost media and downloads
http://support.apple.com/kb/ts1408
Regards,
-Norm G.

I want to create a "clean" sawtooth wave with my own inserted array.

I have a PXI module with a fgen5411. I can make a arbitrary waveform with my own array. that's not the problem. The real problem is that if I insert a waveform array with 4096 steps, Labview divides the steps and the 4096 steps are no longer 4096 steps but less. Because of this the created steps of the sawtooth wave excists one time out of 4 points, and the other time out of 5 points and so on.
I use the "create arbitrary waveform" and the "app sequence waveforms" VI's. And because I use the create arb waveform VI, I have to devide my array values with 10000 so that my scale comes between the values �1 and 1.

Hello Ben,
I solved the problem I had with the number of points. The problem was that I was using 1/5 part of the �create arb waveform� scale(between �1 and 1) so that labview generated five points per step.
Now I can generate a sawtooth with the full 12 bit resolution. But the problem now is that the sawtoothsweep begins negative and ends positive. This is strange because the array I load from file excists out of positive numbers. What I want is a sweep beginning at 2 Volt and ends at at least 8 Volt. I tried to change the offset of the �app sequence waveform� but this did not work. The offset does change, but it can not be made positive. I also tried to devide my array so that it fits in the positive scale of the �create arb waveform
�(between 0 and 1), but this also did not work. Is it possible to make a positive sweep with the 5411 in ARB mode?
I send you screenshots from the part of my program. First I load a array from file and devide this by 5000. Then I create a waveform and load this into the �app sequence waveform�.
Ben, I hope you know what I am doing wrong, because I don�t.
Attachments:
load.bmp ‏291 KB
loadarb.bmp ‏1747 KB
generate.bmp ‏294 KB

How to award points for a topic I did not begin....

i have received an excellent reply which solved a problem. I joined the discussion part way through. I would like to award points to the contributor who solved my problem but can not see how i do this. Can you only award points if you start the thread?

Ironic that in a thread concerning the awarding of
points for helpful replies, you marked the topic as
answered without awarding any points to Adrian.
Exactly my thoughts, except rather than the points themselves, I'm more concerned with the fact that if there is a reply that solves the problem or answers the question, it should be marked as such.

Macbook charges to 99, 20 minutes later to 100- problem??? Help?

Hey, first time here. I've got a question and maybe a problem. I got a macbook last week and the battery has been doing the same thing the whole time. When i charge the battery, it'll charge up until 99%. Then, it'll say "Calculating.. Until charged" for about twenty-30 minutes. This happens after the calculated time goes down to zero and the lightning bolt icon turns to a plug. About twenty to thirty minutes later, it'll say 100 percent and the magsafe will turn to green. Basically- the calculated time is wrong? im not really sure, but i'd like the resolve this unless it's normal. Thank You in advance.

thiswho wrote:
This is normal?
Cause it bothers me a little bit that the time will say 0:01 until charged, and then hit the Calculating..Until full, and twenty minutes later be charged. Anyone else with this problem or know how to resolve it? I like my electronics to be accurate so you can understand why this is a little bothersome to me. Thanks in advance.
Electronics are accurate batteries are not. If you want something more accurate you will need to develop a different battery chemistry and a different charging method that Li-Ion batteries don't use and isn't capable of. You would be best to not use batteries at all if you want real accuracy as there are many factors that can affect charge and discharge rates.

Making it easier to award points for individual answers on the same slide.

Hi
One of my biggest requests would be for it to be made a lot easier to award points for individual answers.
For example: I would like to use the 'fill in the blanks' quiz to create something that is reffered to in educational circles as 'cloze procedure'. Basically I would like to create an entire slide of text with many blank areas that need to be filled in. This is possible at the moment but it is only possible to award points based on every single answer being correct. I would like to award individual points for each correct answer on the slide.
At the moment this can be done with a lot of complex scripting but I would like to be able to do it at the push of a button.
Cheers

Here is the link:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
You can also find it in the main screen of the Captivate forums. That is the way to log a feature request. In the new forum, you can also post Ideas, but the feature requests do reach the team certainly:
http://captivate.adobe.com/captivate/ideas/popular
Lilybiri

Forced to create an Apple ID account with credit card

I'm deploying New MacBook Pros running Mountain Lion in an enterprise environment and i'm told I need an Apple ID just to update the OS. I created one and it wants a credit card. I don't want to hand these out to the company users with a credit card associated with the account. The user might accidently buy Apps and music on the company credit card. On the other hand they shouldn't have to buy Apps the company requires them to use with their personal Apple ID/Credit card even if they are reimbursed.
I'd like to know what other large organizations are doing. We nomally get a new Mac system in, set it up with the users info, run OSX updates, install software and hand it over to them.
What's the work around? I can't imagine big companies are handing out company credit cards just so the users can run updates.

Apple has a Kbase article on how to create an account without a credit card:
http://support.apple.com/kb/ht2534
As far as what other companies are doing: How many apps are you buying for users off the Mac App Store? Apple does have a volume purchase plan where you can buy codes that end user can redeem:
http://www.apple.com/mac/volume-licensing/
It is a LOT of work for a company to maintain Apple IDs for users. What drives that need? Is the cost of the software the end users are purchasing sufficiently large that it really matters? Also keep in mind that every new Mac comes with iPhoto, GarageBand, and iMovie that are redeemed for the first end user who signs in with an Apple ID for the device. Letting the end user use their personal Apple ID is a nice perk.

Why are my song ratings getting randomized with each sync instead of saving the correct ones from the device I latest changed on to the other (PC iPod)

Simple thing. Would be very useful to use.
I listen to any songs, mark their ratings with what I think.
Then the moment I sync my iPod to iTunes (windows 7) All the ratings are getting just randomized. Most of them gets deleted, others get changed to ones I surely didn't touch.
No matter wich device I set them on.
I tried to do on iPod then sync to PC -> gone random
I tried to rate in iTunes then sync to iPod -> gone again.
I did separately the same ratings on my iPod and iTunes, then synced -> RATINGS GONE!
Fix this issue please. It has absolutely no use at the moment.
Cheers.

Your Comcast accounts are POP (unless you enrolled in the Comcat Beta test of Imap) so they won't sync at all. Either enroll in the Beta test or don't use Comcast.
Your iCloud account is Imap and should sync just fine, unless you have set it up incorrectly.

PS-script that can list all clients in a specific collection and if possible, point out direct members...

CM2012Sp1Cu1
Need a powershell-function that can list all the clients in a specific collection, and then somehow define which of them are direct members. The most important thing for me is to list all the members but it would also be great if I could know which ones are
direct / query members.
Very grateful for all the help I can get!
TWP

Here is a very simple example via PowerShell and WMI. It requires your collection id, site code and site server as input. It writes as output the collectionmember plus query, or direct.
$CollectionId = ""
$SiteCode = ""
$SiteServer = ""
$CollectionMembers = Get-WmiObject -Class SMS_FullCollectionMembership -Namespace root/SMS/site_$($SiteCode) -ComputerName $SiteServer -Filter "CollectionId='$CollectionId'"
foreach ($Member in $CollectionMembers) {
if ($Collection.IsDirect -eq "True"){
$MembershipType = "Direct"
} else {
$MembershipType = "Query"
Write-Host $Member.Name $MembershipType
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Update: Found Waveburner, 10 minutes later, created 4 song CD as wanted (with timed pauses inserted, normalized, as needed, etc). A cool tool. Who do I thank? Thank all of you. Sorry if I failed to award "points" properly. You know who you are!

Similar Messages

Maybe you are looking for