Update from 3.5 FMS to 5 pro

Hi,
     we have a couple of streaming interactive servers that are 3.5 and 4, do we need to purchase the full 5 pro licence or just an upgarde one?
    Also are there any issues with running the update process, or should we do a clean install?
   Finally do we need to backup our videos (these are located in an apps dir outside of the main adobe dir) and how do we roll back if needed? Sorry for all the questions! Any advice would be appreciated..
Many thank Daran

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Similar Messages

How do I update from adobe XI standrad to XI Pro?

how do I update from adobe XI standrad to XI Pro?

Hi ianp94190900,
In order to update from Adobe Acrobat XI Standard to Adobe Acrobat XI Pro you will have to purchase the upgrade.
You can download Adobe Acrobat XI Pro. directly using this link Download Acrobat products | Standard, Pro | DC, XI, X & then serialize it using your Adobe ID.
In case if you experience any issue please let us know, we will be happy to help you.
Regards,
Aadesh

I just did a software update from Apple for my Mac Book Pro and it crashed severely. Now it will not boot-up. I had the fading down screen with a message saying to hold down the on Button to reboot but it will not, it starts up with the same massage.

It also comes up with some and more of the info below, whatever it means?
Panic CPU 0 <Panic>
Unable to find perform kext scan:
Debugger called <Panic>
Can’t perform kext scan:
SD process name corresponding to correct thread
MAC OS Version:
Not yet set.
What do I do, can anyone help me?
I also updated a Mac Mini and iMac with no problems.

unfortunatly i had no Backups.
You should make sure to correct that as soon as possible. All computers, regardless of make and model, are ticking time bombs. Hard drives can die at any time, leaving you with an inert chunk of metal that may still contain your data, but in a form that is totally inaccessible without paying thousands to a company that will disassemble the drive in a clean room and read what data they can off the platters.
I wonder why should that happen. It was a simple update. Why should an update ruins all my works and my computer...
It is not the update itself, but the fact that you had corruption in your hard drive's data structures, and writing the thousands of files required by the updater worsened that corruption, damaging the system in the process. These problems can be avoided by repairing your hard drive with Disk Utility prior to installing any system update. Most likely, Disk Utility won't find anything to fix, but when it does, you'll be glad you did it before installing the update!

Update from OX 10.6.8 MacBook pro 3.1 to higher OX

Preferences
1
2
3
4
5
6
7
8
9
0
=
Backspace
Tab
q
w
e
r
t
y
u
i
o
p
Return
capslock
a
s
d
f
g
h
j
k
l
shift
`
z
x
c
v
b
n
m
shift
English
alt
alt
Preferences

I note the question in the title but I do not under stand the narrative.
A 3.1 Macbook Pro will accommodate all OSX that are available, including Mavericks.
Ciao.

Boot Camp Update from 1.4 (beta) on WinXP Pro

I need some help. I have a 17" MBP core 2 duo running WinXP through Boot Camp 1.4 (beta). On the Mac side I use OSX(10.4xxx) - Tiger NOT Leopard.
I would really appreciate it if someone could post a 1,2,3... list of how to update my Boot Camp version. Do I even need to do this? Will it make anything better on my computer?
Also - the Boot Camp update is not showing up in the Apple Software Update (in Windows). I downloaded the Boot Camp update for XP and nothing happens when I try to open it. Any thoughts?
Thanks,
Chris

Chris:
Fortuny is right. You will need to have boot camp 2.0 installed before you get 2.1 installed. You have version 1.4. you must first update it to version 2.0. For that you will need the Leopard Installation Disk. I know you are running Tiger however if you happen to have a Leopard Installation disk then the solution posted [HERE|http://discussions.apple.com/thread.jspa?threadID=1499769&tstart=0] will work for you.
Axel F.

I bought a Mac Book Pro retina display, Serial Number C02J2****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. t

I bought a Mac Book Pro retina display, Serial Number C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
Sincerely
Asrat Kahsay
N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
<Edited by Host>

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The OS X Mt Lion up-to-date program;
http://www.apple.com/osx/uptodate/

I have a 2010 macbook pro 2010 13.3" laptop that will not update from 10.6.3

I have an Apple macBook pro that will not update at all. It is a 13.3 model the initial load is 10.6.3. The battery is dead as well and the pram seems to not hold as well, time reset even when plugged in on restart. any update leads to the spinning wheel freezing, and i mean freeze even the dvd drive stops working completely. Any ideas?

You can update to higher versions of Snow Leopard by applying the combo updates, anyway. Your predicament may come from the fact that a prior update didn't install properly, and is blocking the install of other updates. You should download the combo updates from Apple's website, and apply them.
You'll find the 10.6.8 update here. You'll still have to apply the various security updates that have been released since, if any.

I recently update my 4 year old mac book pro to Yosemite. I am now getting a pixilated log inn scene from time to time. What do I need to do?

I recently update my 4 year old mac book pro to Yosemite. I am now getting a pixilated log inn scene from time to time. What do I need to do?

how often does this happen for you?

After installing 3 updates from "software update app" today (june,11th) my MacBook Pro doesn't initialize anymore. Why this is happening? And how do i solve this issue?

Hello Mac Friends!
Need some help here!
After installing 3 updates from the "software update" app today (June, 11th) my macbook doesn' t initialize anymore.
Is there someone who can help me fix this issue?
Why this is happening?
How can i fix it?
Wainting some feedback...

Two places to start with that would have been better:
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro
TimeMachine 101
https://support.apple.com/kb/HT1427
Lion Recovery Mode
http://support.apple.com/kb/HT4718
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.htmlhttp://macperformanceguide.com/Mac-HowToClone.htmlhttp://www.macupdate.com/app/mac/7032/carbon-copy-cloner
If you have backups, if you can and saved your ML installer, you can start over.
Prevention and taking a more proactive approach to system maintenance and repair, rather than fixiing a problem (likely pre-existing?) format the drive or partition and reinstall 10.8.1 and restore from backups.
Never had any issues? freezing? apps crashing before?

Office 365 Pro Plus - updates from the internet

Hi All
I've used the Office deployment toolkit to download Office 365 Pro Plus to a local file server, and have now packaged this up within SCCM 2012 for deployment to clients.
In my configuration.xml file i have the following set for updates
<Updates Enabled="TRUE" />
I understand that this setting allows for updates, and client will download them from the internet.
Is this correct?
I am concerned that the Office 365 source files i downloaded are a few months old now, so will be out of date and i am relying very much on my deployed clients to be downloading updates as expected. Do i need to do anything else?
Thanks

<Updates Enabled="TRUE" />
I understand that this setting allows for updates, and client will download them from the internet.
Is this correct?
That's correct, with Updates element configured as "TRUE", the Click-to-Run update system will check for updates from the CDN server automatically. So with this configuration, you will always be up-to-date:
http://technet.microsoft.com/en-us/library/jj219426.aspx#BKMK_UpdatesElement
Deploying with an old build should be no problem here, but why not re-download a newer build with ODT (Office Deployment Tool). That should not take too much time and will definitely reduce the network bandwidth consumption when Office 365 updates itself
from each client after the deployment...
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini

Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini

There is no license required for iWeb. Just do a Wyodor suggested and you'll be ready to go. If you're running Lion however, consider the following:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Updating from fcpx 10.1.1 to 10.1.3 says "Do you want to buy Final Cut Pro 10.1.3?"

okay I want to update from version 10.1.1 to the latest version 10.1.3. In app store its even there in purchases. But when I go to final cut pro app and click 'Install' it says "Final Cut Pro 10.1.1 is already installed and was not purchased from the Mac App Store. Do you want to buy Final Cut Pro 10.1.3?". what does this mean? if the update is free why are they saying I have to buy it. :/

IIf you are signed in to the App Store with the Apple ID used to purchase the software, you would need to contact the App Store.

Need new pro key to update from 7.0.4 to 7.1.6?

Greetings,
Have QT Pro v7.0.4 installed. Would like to update to v7.1.6 without having to buy a new key for QTPro. Intuition says I should be able to do this, but conflicting info from Apple makes me question my intuition and hesitate to install v7.1.6.
- Apple site says this v7.1.6 update is recommended for all v7 users.
- legal agreement text at beginning of v7.1.6 installer says that continuing installation will require purchase of new key for pro users.
- QT "help->about" box says I am using v7.0.4, but "help->update" says "your quicktime software is up to date", even though the Apple site says there is a v7.1.6 available.
Can I update from v7.0.4 to v7.1.6 without having to purchase a new key to retain Pro level? If so, is running the v7.1.6 installer downloaded from the main Apple site the appropriate way to do this?
I'd rather be more sure of the answer before any trial and error experiment that obliterates my existing Pro key.
Thanks

If you were going from QT6 to QT7 you would need to purchase a new QT pro key. In other words when Apple releases a new version of QT a new key is required. QT7.0.4 to 7.1.6 is just a update of the exsisting version. So your QT7 key is good untill the release of QT8.
I would open the QuickTime control panel click on the Update tab then click on the Update... button for the QT7.1.6.200 update, your key should remain intact. But it wouldn't hurt to write down the registration info anyway.
If you want to put a check in the box-Check for updates automatically-Apple will let you know when there is a new one.

Acrobat Pro won't update from 10.1.6 to 10.1.7, any tips, on Mac-

Acrobat Pro won't update from 10.1.6 to 10.1.7, any tips, on Mac…?

One of two things:
1. Go to the Terminal App and type the word "sudo" and hit the Enter/Return key. If it comes back with a permissions error then seek from Apple to correct it.
2. If there is no permissions error in the Terminal app then go to the installation log at "/var/log/install.log" or "/private/var/log/install.log". Open it up and see if you find an error about failing to write to the file:
./postinstall: Error in converting the plist /Library/Preferences/com.adobe.PDFAdminSettings.plist to xml1 format
If you get the error above then delete the file at the location and try updating again

Just installing a few updates from the Mac App Store for mountain lion on my 2010 MacBook Pro, during this it made a noise and then the screen and keyboard went off, like it is off. What happened, is it off...or should I just wait it out?

Just installing a few updates from the Mac App Store for mountain lion on my 2010 MacBook Pro, during this it made a noise and then the screen and keyboard went off, like it is off. What happened, is it off...or should I just wait it out?

What kind of noise?
The only things I can think of that make noise are fans and disks. Fans usually will not cause the computer to shutdown as you describe. My guess is your disk drive died. I hope you made a backup prior to start the ungrade.
Allan

Update from 3.5 FMS to 5 pro

Similar Messages

Maybe you are looking for