Update from Exchange 2013 Cu2 to SP1 - Outlook 2010 with SP2 clients disconnected
Hi,
we recently upgraded a standalone Exchange 2013 Server to SP1. Owa works fine, but all internal Outlook 2010 Clients (with SP2) get disconnected. Creating a new Profile, and testing the internal autodiscovery leeds to an Error 12030 (Connection reset) during
the discovery process.
I already checked the Service Point, the discovery URLs, even recreated the autodiscover virtual Directory in iis. But nothing changed.
The self signed certificate, that was used before the update is further used, and well known to all Clients. As I tested, OWA is working well everywhere.
Anyone some new ideas?
Best regards
Bernhard
Hi,
How did you recreate outlook profile? Manually or Automatic?
If automatic failed, please try to recreate manually and check the result.
If manual failed, please refer to the following methods to troubleshoot the issue:
1>Try to open the following link and check the result:
https://CASName/autodiscover/autodiscover.xml
2>Try to use RCA to test outlook autodiscover and check the result.
https://testconnectivity.microsoft.com/
Thansk.
Niko Cheng
TechNet Community Support
Similar Messages
-
Exchange 2013 - How to configure Outlook Anywhere with certificate based authentication?
Hello,
is it possible to secure Outlook Anywhere in Exchange 2013 with certficate based authentication?
I found documentation to configure CBA for OWA and ActiveSync, but not for Outlook Anywhere.
We would like to secure external access to the mailboxes via Outlook by using CBA.
Thanks a lot in advance!
Regards,
AndréHi,
Let’s begin with the answer in the following thread:
http://social.technet.microsoft.com/Forums/en-US/e4b44ff0-4416-44e6-aa78-be4c1c03f433/twofactor-authentication-outlook-anywhere-2010?forum=exchange2010
Based on my experience, Outlook client only has the following three authentication methods:Basic, NTML, Negotiate. And for more information about Security for Outlook Anywhere, you can refer to the following article:
http://technet.microsoft.com/en-us/library/bb430792(v=exchg.141).aspx
If you have any question, please feel free to let me know.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support -
Setup a simple sales funnel with exchange 2013 public folders and outlook 2010 -2013
BCM for Outlook is big and has too many choices. What we want is a combination of contacts and tasks within a public folder so we can see what others are doing. If possible I want
to make a connection between an contact and a task. The task should have some extra fields like branches responsible organization members status etc. Does anyone have a simple solution which is easy to implement in a small organization of 10 people?Hello,
First of all thank you for your answer. The Outlook version I'm using is 14.0.7113.5005 and the Exchange versuin is CU3. As I'm testing it on XP client it is probably the issue in the PS. I'll try it with Win7 client probably tomorrow. I wonder if there
exists any kind of workaround for XP clients.
Thank you in advance,
Peter -
Update from Exchange 2013 SP1 to CU8 error
hi,
i've got problem when update to cu8.
the file 'c:\program files\microsoft\exchange server\v15\transportroles\agents\hygiene\asdat.msi' is not a valid installation package for the product microsoft exchange 2007 standard anti-spam filter updates. try to find the installation package 'asdat.msi'
in a folder from which you can install microsoft exchange 2007 standard anti-spam filter updates.
please help me..hi,
i've got problem when update to cu8.
the file 'c:\program files\microsoft\exchange server\v15\transportroles\agents\hygiene\asdat.msi' is not a valid installation package for the product microsoft exchange 2007 standard anti-spam filter updates. try to find the installation package 'asdat.msi'
in a folder from which you can install microsoft exchange 2007 standard anti-spam filter updates.
please help me..
The following error was generated when "$error.Clear();
uninstall-MsiPackage -ProductCode '{C3F10D8C-BD70-4516-B2B4-BF69019807
41}' -LogFile ($RoleSetupLoggingPath + "\UninstallASDat.msilog")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: Couldn
't remove product with code c3f10d8c-bd70-4516-b2b4-bf6901980741. The installati
on source for this product is not available. Verify that the source exists and t
hat you can access it. Error code is 1612. ---> System.ComponentModel.Win32Excep
tion: The installation source for this product is not available. Verify that the
source exists and that you can access it
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception
, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception
, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.UninstallMsi.RemoveProductCode(Gu
id productCode)
at Microsoft.Exchange.Management.Deployment.UninstallMsi.InternalProcessRecor
d()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String fun
cName, Action func, Boolean terminatePipelineIfFailed)".
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder. -
Exchange 2013 CU2 to CU3 OWA now redirects to IIS page
so i did the the update from Exchange 2013 CU2 to CU3 last night and i am unable to access OWA. when i go to the site i initially received a 403 forbidden error but i cleared out the require SSL, which somehow got re-enabled, and now it redirects to the
IIS 8 page.
In IIS it seems like the redirect values for default web site got cleared away. I put in the address that was previously there and then e-mail for the whole company goes down after an IIS reset. In the default web site i entered to redirect to https://mail.contoso.com/owa
like how it was before but that doesn't work.
any ideas/feedback would be great!
Thanks!I guess you are running a multirole server.
Did you try removing the OWA virtual directories - for both Default Website and Exchange Back End site with:
#Replace ServerName
Remove-OwaVirtualDirectory "ServerName\owa (Default Web Site)"
Remove-OwaVirtualDirectory "ServerName\owa (exchange back end)"
and re-creating them again with:
#Replace ServerName & mail.domain.com
New-OwaVirtualDirectory -InternalUrl "https://ServerName/owa" -ExternalUrl "https://mail. domain.com/owa"
New-OwaVirtualDirectory -InternalUrl "https://ServerName/owa" -ExternalUrl "https://mail. domain.com/owa" -WebSiteName "Exchange Back End" -
Migrating a mailbox cross forest from exchange 2013 Sp1 to exchange 2010 SP2 Update rollup 8
I can migrate a mailbox fine from exchange 2010 sp2 update rollup 8 to exchange 2013 sp1 or Cu2.
I was testing today migrating cross forest from 2010 sp2 udpate rollup 8 back to exchange 2010 sp2 but I get the below error. Is this even possible? I cannot find any documentation on this scenario yet.
VERBOSE: [21:52:47.622 GMT] New-MoveRequest : The remote server doesn't support client 'casservername.domain.com'
version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
VERBOSE: [21:52:47.637 GMT] New-MoveRequest : Admin Audit Log: Entered Handler:OnComplete.
The remote server doesn't support client 'casservername.domain.com' version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemotePermanentException
+ FullyQualifiedErrorId : 782D22F0,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequestHi Steve,
I'm a little confused what you are saying. Here is my understanding:
When you migrate mailboxes from Exchange 2013 back to Exchange 2007, the above error occurs.
If I have misunderstood your concern, please let me know.
For migrating mailboxes back to Exchange 2007, there is a simple and straightforward method. Please use the New-MailboxExportRequest cmdlet to convert all mailboxes into pst files. And then use the Import-Mailbox cmdlet to import all pst files into Exchange
2007.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
Exchange 2013 CU2, Alert for OWA Health set unhealthy from SCOM 2012
I am facing issue in Exchange 2013 CU2, I got this alert from SCOM 2012 atleast 5-6 times a day, OWA health set is unhealthy, I have done all the steps mentioned in this web link. Authentication type for OWA Virtual directory is integrated windows and Basic.
I have 2 CAS servers, and this alert generated from both of them.
http://technet.microsoft.com/en-us/library/ms.exch.scom.OWA(EXCHG.150).aspx?v=15.0.712.24
Alert: Health Set unhealthy
Source: EX-CAS - OWA
Path: EX-CAS;EX-CAS
Last modified by: System
Last modified time: 1/5/2014 8:15:08 PM
Alert description: Outlook Web Access logon is failing on ClientAccess server EX-CAS.
Availability has dropped to 0%. You can find protocol level traces for the failures on C:\Program Files\Microsoft\Exchange Server\V15\Logging\Monitoring\OWA\ClientAccessProbe.
Incident start time: 1/6/2014 4:05:08 AM
Last failed result:
Failing Component - Owa
Failure Reason - CafeFailure
Exception:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Exchange.Net.MonitoringWebClient.ScenarioException:
Microsoft.Exchange.Net.MonitoringWebClient.ScenarioException:
Failure source: Owa
Failure reason: CafeFailure
Failing component:Owa
Exception hint: CafeErrorPage: CafeFailure Unauthorized Inner exception: Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException
ErrorPageFailureReason: CafeFailure, RequestFailureContext: FailurePoint=FrontEnd, HttpStatusCode=401, Error=Unauthorized, Details=, HttpProxySubErrorCode=, WebExceptionStatus=
Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: An error occurred on the Client Access server while processing the request
WebExceptionStatus: Success
GET https://localhost/owa/ HTTP/1.1
User-Agent: Mozilla/4.0 (compatible; MSIE 9.0; Windows NT 6.1; MSEXCHMON; ACTIVEMONITORING; OWACTP)
Accept: */*
Cache-Control: no-cache
X-OWA-ActionName: Monitoring
Cookie:
HTTP/1.1 401 Unauthorized
request-id: 211474d2-a43e-4fab-8038-3aab35353568
X-FailureContext: FrontEnd;401;VW5hdXRob3JpemVk;;;
Server: Microsoft-IIS/7.5
WWW-Authenticate: Negotiate,NTLM,Basic realm="localhost"
X-Powered-By: ASP.NET
X-FEServer: EX-CAS
Date: Mon, 06 Jan 2014 04:14:47 GMT
Content-Length: 0
Response time: 0s
---> Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException
ErrorPageFailureReason: CafeFailure, RequestFailureContext: FailurePoint=FrontEnd, HttpStatusCode=401, Error=Unauthorized, Details=, HttpProxySubErrorCode=, WebExceptionStatus=
Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: An error occurred on the Client Access server while processing the request
WebExceptionStatus: Success
GET https://localhost/owa/ HTTP/1.1
User-Agent: Mozilla/4.0 (compatible; MSIE 9.0; Windows NT 6.1; MSEXCHMON; ACTIVEMONITORING; OWACTP)
Accept: */*
Cache-Control: no-cache
X-OWA-ActionName: Monitoring
Cookie:
HTTP/1.1 401 Unauthorized
request-id: 211474d2-a43e-4fab-8038-3aab35353568
X-FailureContext: FrontEnd;401;VW5hdXRob3JpemVk;;;
Server: Microsoft-IIS/7.5
WWW-Authenticate: Negotiate,NTLM,Basic realm="localhost"
X-Powered-By: ASP.NET
X-FEServer: EX-CAS
Date: Mon, 06 Jan 2014 04:14:47 GMT
Content-Length: 0
Response time: 0s
--- End of inner exception stack trace ---
at Microsoft.Exchange.Net.MonitoringWebClient.BaseExceptionAnalyzer.Analyze(TestId currentTestStep, HttpWebRequestWrapper request, HttpWebResponseWrapper response, Exception exception, Action`1 trackingDelegate)
at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.AnalyzeResponse[T](HttpWebRequestWrapper request, HttpWebResponseWrapper response, Exception exception, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse)
at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.EndSend[T](IAsyncResult result, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse, Boolean fireResponseReceivedEvent)
at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.EndGet[T](IAsyncResult result, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse)
at Microsoft.Exchange.Net.MonitoringWebClient.Authenticate.AuthenticationResponseReceived(IAsyncResult result)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Net.MonitoringWebClient.BaseTestStep.EndExecute(IAsyncResult result)
at Microsoft.Exchange.Net.MonitoringWebClient.Owa.OwaLogin.AuthenticationCompleted(IAsyncResult result)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Net.MonitoringWebClient.BaseTestStep.EndExecute(IAsyncResult result)
at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Bool
States of all monitors within the health set:
Note: Data may be stale. To get current data, run: Get-ServerHealth -Identity 'EX-CAS' -HealthSet 'OWA'
State
Name
TargetResource HealthSet
AlertValue ServerComponent
NotApplicable OwaCtpMonitor
OWA
Unhealthy None
States of all health sets:
Note: Data may be stale. To get current data, run: Get-HealthReport -Identity 'EX-CAS'
State
HealthSet
AlertValue LastTransitionTime
MonitorCount
NotApplicable ActiveSync
Healthy 1/3/2014 5:21:13 AM
2
NotApplicable AD
Healthy 11/24/2013 6:54:18 AM
10
NotApplicable ECP
Healthy 1/5/2014 3:03:05 AM
1
Online
Autodiscover.Proxy
Healthy 11/20/2013 10:06:37 AM
1
NotApplicable Autodiscover
Healthy 1/3/2014 10:18:17 PM
2
Online
ActiveSync.Proxy
Healthy 11/20/2013 10:06:37 AM
1
Online
ECP.Proxy
Healthy
11/21/2013 6:16:08 PM 4
Online
EWS.Proxy
Healthy 11/20/2013 10:06:37 AM
1
Online
OutlookMapi.Proxy
Healthy 11/24/2013 6:54:28 AM
4
Online
OAB.Proxy
Healthy 11/19/2013 7:14:34 PM
1
Online
OWA.Proxy
Healthy 11/20/2013 10:06:37 AM
2
NotApplicable EDS
Healthy 1/3/2014 5:19:56 AM
10
Online
RPS.Proxy
Healthy 1/3/2014 5:21:27 AM
13
Online
RWS.Proxy Healthy
1/3/2014 5:20:09 AM 10
Online
Outlook.Proxy
Healthy 1/3/2014 5:21:12 AM
4
NotApplicable EWS
Healthy 1/3/2014 10:18:17 PM
2
Online
FrontendTransport
Healthy 1/5/2014 3:47:09 AM
11
Online
HubTransport
Healthy 1/5/2014 3:47:09 AM
29
NotApplicable Monitoring
Unhealthy 1/5/2014 4:05:57 AM
9
NotApplicable DataProtection
Healthy 1/3/2014 5:25:42 AM
1
NotApplicable Network Healthy
1/4/2014 1:51:16 PM 1
NotApplicable OWA
Unhealthy 1/5/2014 8:05:08 PM
1
NotApplicable FIPS
Healthy 1/3/2014 5:21:12 AM
3
Online
Transport
Healthy 1/5/2014 4:11:00 AM
9
NotApplicable RPS
Healthy 11/20/2013 10:07:12 AM
2
NotApplicable Compliance
Healthy 11/20/2013 10:08:10 AM
2
NotApplicable Outlook
Healthy 11/21/2013 6:12:54 PM
2
Online
UM.CallRouter
Healthy 1/5/2014 3:47:10 AM
7
NotApplicable UserThrottling
Healthy 1/5/2014 4:16:42 AM
7
NotApplicable Search
Healthy
11/24/2013 6:55:06 AM 9
NotApplicable AntiSpam
Healthy 1/3/2014 5:16:43 AM
3
NotApplicable Security
Healthy 1/3/2014 5:19:28 AM
3
NotApplicable IMAP.Protocol
Healthy 1/3/2014 5:21:14 AM
3
NotApplicable Datamining
Healthy 1/3/2014 5:18:34 AM
3
NotApplicable Provisioning
Healthy 1/3/2014 5:19:56 AM
3
NotApplicable POP.Protocol
Healthy 1/3/2014 5:20:44 AM
3
NotApplicable Outlook.Protocol
Healthy 1/3/2014 5:19:46 AM
3
NotApplicable ProcessIsolation
Healthy 1/3/2014 5:19:26 AM
9
NotApplicable Store
Healthy 1/3/2014 5:20:38 AM
6
NotApplicable TransportSync
Healthy 11/24/2013 6:53:09 AM
3
NotApplicable MailboxTransport
Healthy 1/3/2014 5:21:11 AM
6
NotApplicable EventAssistants
Healthy 11/21/2013 6:22:01 PM
2
NotApplicable MRS
Healthy 1/3/2014 5:20:29 AM
3
NotApplicable MessageTracing
Healthy 1/3/2014 5:18:15 AM
3
NotApplicable CentralAdmin
Healthy 1/3/2014 5:17:25 AM
3
NotApplicable UM.Protocol
Healthy 1/3/2014 5:17:08 AM
3
NotApplicable Autodiscover.Protocol
Healthy 1/3/2014 5:17:13 AM
3
NotApplicable OAB
Healthy 1/3/2014 5:20:51 AM
3
NotApplicable OWA.Protocol
Healthy 1/3/2014 5:20:52 AM
3
NotApplicable Calendaring
Healthy 11/24/2013 6:56:59 AM
3
NotApplicable PushNotifications.Protocol
Healthy 11/21/2013 6:16:05 PM
3
NotApplicable EWS.Protocol
Healthy 1/3/2014 5:19:07 AM
3
NotApplicable ActiveSync.Protocol
Healthy
1/3/2014 5:20:16 AM 3
NotApplicable RemoteMonitoring
Healthy 1/5/2014 3:47:09 AM
3
Any solution for this alert, how to rectify it, but OWA is running perfect for all users.Hi,
Sorry for the late reply.
Do we have Exchange 2010 coexistence?
If it is the case, I know the following known issue:
Release Notes for Exchange 2013
http://technet.microsoft.com/en-us/library/jj150489%28v=exchg.150%29.aspx
Please note the "Exchange 2010 coexistence" session.
If it is not related to our problem, please check the IIS log.
If there is any detailed error code, like 401.1, 401.2, please let me know.
Hope it is helpful
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
Outlook 2010 SP2 - Error when editing shared calendar: Post Exchange 2013 CU2 Migration
Hi there,
I have a strange comportment with Outlook 2010 SP2 and Exchange 2013 CU2 and i really need your help.
Frequently, when an user (who has the good permissions for) want to edit a shared calendar (edit a meeting or add one), he has this error message:
" Cannot display the folder. Your server administrator has limited the number of items you can open simultaneously. Try closing message you have opened or removing attachments and images from unsent messages you are composing "
I see anything in the Exchange server event log but i have each time, an error message in the client event log:
" Microsoft Office14 Alerts ID 300"
Everything work very well with Outlook 2013.
Many thanks in advance for your assistance, and I am looking forward to reading from you.Hi,
According to your description, the issue is related to your Office 2010 client.
And the issue can be resolved by installing the Microsoft Office 2010 Deployment Kit.
Here are the steps you can refer to :
1. Open a command prompt with administrative permissions.
2. Browse to the directory that contains the Offvirt.msi.
3. At the command prompt, run the following command:
msiexec /i OffVirt.msi [licensing flags]
You must enter a correct licensing flag in the following list to correctly configure the Deployment Kit. Otherwise, functionality may be incorrect.
For more information, you can refer to the following article:
http://blogs.technet.com/b/virtualworld/archive/2010/07/07/microsoft-has-encountered-an-error-with-licensing-and-will-need-to-close.aspx
If you have any question, please feel free to let me know.
Thanks,
Angela
Angela Shi
TechNet Community Support -
Upgrading from Exchange 2013 CU1 to CU2
1 : Upgrading from Exchange 2013 CU1 to CU2
================================================================
"Unable to remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1.
Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'Service 'Tracing Service for Search in Exchange ' (SearchExchangeTracing) could not be stopped.
Verify that you have the correct permissions to stop system services.'."
================================================================Hi,
According to the error message, it is highly likely caused by insufficient permission.
Please verify that your user account is member of Exchange administrators group and not limit by RBAC, than try again to see if this works.
If the issue continues, run the command below to uninstall the product:
msiexec.exe /X {code 4934d1ea-be46-48b1-8847-f1af20e892c1}
Msiexec (command-line options):
http://technet.microsoft.com/en-us/library/cc759262(v=ws.10).aspx
If you have any question, please feel free to let me know.
Thanks,
Angela
Angela Shi
TechNet Community Support -
While applying todays security update for exchange 2013 (KB3040856) there was a power issue (sad story) and the update was interrupted halfway through. A bunch of service were left deactivated and I beleive I brought them back.
At this point the exchange admin center brings me to the login and when I do login, I get an enable to display page msg after the login.
I have an ActiveSync error log "cannot access the mailbox because the mail box server is disconnected" translated from french.
I also have ASP.NET 4.0 error "MapiExceptionMdbOffline"
What could be the next step in fixing this if it is at all possible ? I am not an expert in cmdlet but can manage if pointed in the right direction.
Any help would be greatly appreciated.
Thank you.I ran update KB3040856, and it disabled all Exchange services, and a few others besides (IIS and filtering). I ran the test-servicehealth cmdlet and eventually got all the services set to automatic and all running.
This is really a stupid thing for an update to do, what is going on? Exchange 2013 is trouble enough already, we really do not need this sort of agro. -
Dear all:
I encountered a problem and needs to be solved.
We runs Exchange 2013 CU2, and some users told me that their mails in sent items and inbox were automatically delivered into "deleted items", especially in last two weeks or yesterday.
The users said they cannot delete so many mails at one time. And now I found one user's mails in "deleted items" were also deleted this morning.
I don't know whether it was bug or not in exchange 2013 cu2, and how to solve this problem? Thanks for any help.
koiso
Technet MicrosoftHi koiso,
Are there any commons among problematic users or deleted emails? For example,
they are on the same database
they have delegate settings
they are using mobile phone to sync emails
At the same time, I'd recommend you enable Mailbox Audit Log for the problematic users. For your reference:
http://technet.microsoft.com/en-us/library/ff459237(v=exchg.150).aspx
Regards,
Rebecca Tu
TechNet Community Support -
Setup Error 1603 with Exchange 2013 incl. SP1 on Windows Server 2012 R2
Hello all,
i've started the installation of a new Exchange 2013 with SP1 in a Windows 2012 R2 environment. New AD, no Exchange previously installed. Exchange ISO from
Volume Licensing Service Center (Filename: SW_DVD9_Exchange_Svr_2013w_SP1_MultiLang_Std_Ent_MLF_X19-35118.iso)
All the prerequisites are ok, installed also the “Unified Communications Managed API (UCMA) 4.0″ as requested.
Setup.exe i've started with "run as administrator" and all went well, until Step 11 of 15 (Mailbox role:Mailbox service).
Setup stopped and gives an error:
The following error was generated when "$error.Clear();
Install-MsiPackage `
-PackagePath ([System.IO.Path]::Combine($RoleLanguagePacksPath, "Setup\ServerRoles\UnifiedMessaging\MSSpeech_SR_TELE.nb-NO.msi")) `
-PropertyValues ("ARPSYSTEMCOMPONENT=1 ALLUSERS=1") `
-LogFile ([System.IO.Path]::Combine($RoleSetupLoggingPath, "InstallSpeech-nb-NO.msilog"))
" was run: "Installing product F:\Setup\ServerRoles\UnifiedMessaging\MSSpeech_SR_TELE.nb-NO.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'The cabinet file 'EngineInstanceData.cab'
required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.'.".
Exchange ECP is not working (HTTP Error 404.0 - Not Found), EMS (Shell) is working - if i try a get-mailboxserver it gives me the correct servername.
Exchange Services are running:
Running MSExchangeADTop... Microsoft Exchange Active Directory...
Running MSExchangeAntis... Microsoft Exchange Anti-spam Update
Running MSExchangeDelivery Microsoft Exchange Mailbox Transpor...
Running MSExchangeDiagn... Microsoft Exchange Diagnostics
Running MSExchangeEdgeSync Microsoft Exchange EdgeSync
Running MSExchangeHM Microsoft Exchange Health Manager
Stopped MSExchangeIMAP4BE Microsoft Exchange IMAP4 Backend
Running MSExchangeIS Microsoft Exchange Information Store
Running MSExchangeMailb... Microsoft Exchange Mailbox Replication
Running MSExchangeMigra... Microsoft Exchange Migration Workflow
Stopped MSExchangePOP3BE Microsoft Exchange POP3 Backend
Running MSExchangeRPC Microsoft Exchange RPC Client Access
Running MSExchangeServi... Microsoft Exchange Service Host
Running MSExchangeSubmi... Microsoft Exchange Mailbox Transpor...
Running MSExchangeTrans... Microsoft Exchange Transport
Running MSExchangeTrans... Microsoft Exchange Transport Log Se...
Running MSExchangeUM Microsoft Exchange Unified Messaging
So, how to proceed ? Try to download a new ISO for Exchange 2013 incl. SP1 and run the setup again ?
What happens to the existing (corrupt) installation of the exchange which is not working ?
Thanks for your help
BrunoHi,
From the error message, the cabinet file 'EngineInstanceData.cab' required for this installation is corrupt and cannot be used. I'm afraid you have to download a new ISO for Exchange 2013 incl. SP1 and run the setup again.
If it still doesn't work, I recommend you remove the failed Exchange server installation, then re-install Exchange server.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Exchange 2013 CU2 will not install, Exchange is now in an unuseable state.
I have downloaded Exchange 2013 CU2 and attempted to install it from a local drive. Exchange 2013 is installed on a Server 2012 Standard VM in Hyper-V. I ran the two following commands before trying to install
setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
Upon trying to run the installer, I recieve the following error.
Error:
The following error was generated when "$error.Clear();
& $RoleBinPath\ServiceControl.ps1 EnableServices Critical
" was run: "AuthorizationManager check failed.".
During my first install attept, the error was on step 4 of 15. I have tried to rerun the setup with no luck. I noticed the installer leaves all the Exchange services disabled, as well as winmgmt, remoteregistry, w3svc, iisadmin. These four services
are the critical services the errors refer to. I have verified my execution policy is correct
PS C:\Windows\system32> Get-ExecutionPolicy -list
Scope
ExecutionPolicy
MachinePolicy
Unrestricted
UserPolicy
Undefined
Process
Undefined
CurrentUser
Undefined
LocalMachine
RemoteSigned
Upon trying to rerun the setup, I have ran the following commands in order to start the critical services manually
Get-Service-name
winmgmt,
remoteregistry,
w3svc,
iisadmin
|
set-service -startuptype
automatic
Get-Service-name
winmgmt,
remoteregistry,
w3svc,
iisadmin
|
Start-Service
No matter what I do, the Exchange 2013 CU2 installer seems to fail. I'd appreciate any possible help with this.
Thanks,
Chris
To add to what I posted, I also have the following error in the event log.
[07/22/2013 13:57:01.0279] [1] Executing:
& $RoleBinPath\ServiceControl.ps1 EnableServices Critical
[07/22/2013 13:57:01.0373] [1] The following 1 error(s) occurred during task execution:
[07/22/2013 13:57:01.0373] [1] 0. ErrorRecord: AuthorizationManager check failed.
[07/22/2013
13:57:01.0373] [1] 0. ErrorRecord:
System.Management.Automation.PSSecurityException: AuthorizationManager
check failed. ---> System.Runtime.InteropServices.COMException: The
service cannot be started, either because it is disabled or because it
has no enabled devices associated with it. (Exception from HRESULT:
0x80070422)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementObject.Get()
at System.Management.Automation.PsUtils.GetParentProcess(Process current)
at System.Management.Automation.SecuritySupport.GetExecutionPolicy(String shellId, ExecutionPolicyScope scope)
at System.Management.Automation.SecuritySupport.GetExecutionPolicy(String shellId)
at Microsoft.PowerShell.PSAuthorizationManager.CheckPolicy(ExternalScriptInfo script, PSHost host, Exception& reason)
at Microsoft.PowerShell.PSAuthorizationManager.ShouldRun(CommandInfo
commandInfo, CommandOrigin origin, PSHost host, Exception& reason)
at
System.Management.Automation.AuthorizationManager.ShouldRunInternal(CommandInfo
commandInfo, CommandOrigin origin, PSHost host)
--- End of inner exception stack trace ---
at
System.Management.Automation.AuthorizationManager.ShouldRunInternal(CommandInfo
commandInfo, CommandOrigin origin, PSHost host)
at
System.Management.Automation.CommandDiscovery.ShouldRun(ExecutionContext
context, PSHost host, CommandInfo commandInfo, CommandOrigin
commandOrigin)
at
System.Management.Automation.CommandDiscovery.LookupCommandProcessor(CommandInfo
commandInfo, CommandOrigin commandOrigin, Nullable`1 useLocalScope,
SessionStateInternal sessionState)
at
System.Management.Automation.CommandDiscovery.LookupCommandProcessor(String
commandName, CommandOrigin commandOrigin, Nullable`1 useLocalScope)
at System.Management.Automation.ExecutionContext.CreateCommand(String command, Boolean dotSource)
at
System.Management.Automation.PipelineOps.AddCommand(PipelineProcessor
pipe, CommandParameterInternal[] commandElements, CommandBaseAst
commandBaseAst, CommandRedirection[] redirections, ExecutionContext
context)
at
System.Management.Automation.PipelineOps.InvokePipeline(Object input,
Boolean ignoreInput, CommandParameterInternal[][] pipeElements,
CommandBaseAst[] pipeElementAsts, CommandRedirection[][]
commandRedirections, FunctionContext funcContext)
at System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
[07/22/2013 13:57:01.0373] [1] [ERROR] The following error was generated when "$error.Clear();
& $RoleBinPath\ServiceControl.ps1 EnableServices Critical
" was run: "AuthorizationManager check failed.".
[07/22/2013 13:57:01.0373] [1] [ERROR] AuthorizationManager check failed.
[07/22/2013
13:57:01.0373] [1] [ERROR] The service cannot be started, either
because it is disabled or because it has no enabled devices associated
with it. (Exception from HRESULT: 0x80070422)
[07/22/2013
13:57:01.0388] [1] [ERROR-REFERENCE]
Id=AllRolesMidFileCopyComponent___af0f15afe35c4e7cba121e546f405214
Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[07/22/2013 13:57:01.0388] [1] Setup is stopping now because of one or more critical errors.
[07/22/2013 13:57:01.0388] [1] Finished executing component tasks.
[07/22/2013 13:57:01.0435] [1] Ending processing Start-MidFileCopy
[07/22/2013 13:58:09.0121] [0] End of Setup
[07/22/2013 13:58:09.0121] [0] **********************************************
I also have these two errors in event viewer that keep occuring.
Event 2280, IIS-W3SVC-WP
The Module DLL C:\Program Files\Microsoft\Exchange Server\V15\Bin\kerbauth.dll failed to load. The data is the error.
Event 2300, IIS-W3SVC-WP
The
worker process cannot access the CLR configuration file at 'C:\Program
Files\Microsoft\Exchange
Server\V15\bin\GenericAppPoolConfigWithGCServerEnabledFalse.config'.
Verify that the file exists and that the worker process has read access
to the file.I kept quickly running the following two commands while the install was happening
Get-Service-name
winmgmt,
remoteregistry,
w3svc,
iisadmin
|
set-service -startuptype
automatic
Get-Service-name
winmgmt,
remoteregistry,
w3svc,
iisadmin
|
Start-Service
This caused the install to succeed. -
Cannot send mail from Exchange 2013 to Exchange 2007
I have an
Exchange 2007server with all roles in the same server (Version:
08.03.0327.001 ) on a Windows 2008 R2 server. I have now installed two Exchange 2013 servers both with CAS and MBX roles on Windows 2012 servers
(full patched). There is also a DAG between the new servers. All mail goes through a BorderWare besides the internal mail.
I can send mail from both environments to the Internet. I can also send internal mail from Exchange 2007 to Exchange 2013.But the problem is that I am unable to send from Exchange 2013 to Exchange 2007. I've debugged, but not solved the problem and there are
few articles on the Internet.
Any suggestions?These two sentences are in conflict : "I can also send
internal mail
from Exchange
2007 to
Exchange 2013. But
the problem is
that I am unable
to send from Exchange
2007 to
Exchange 2013. "
Can you describe what is your real problem? Flow from E2007->E2013? Or vice versa?
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir -
Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server. The command works if you issue directly from the server exchange shell.
I open the remote power shell to the exchange server 2013.
Issue the following commands and getting the following error.
$mailbox = Get-Mailbox -Identity testuser$mailbox.EmailAddresses -= "eum:50004;phone-context=telExt5digits.lync5.com"Then getting the following error:Method invocation failed because [System.Collections.ArrayList] doesn't contain a method named 'op_Subtraction'.
At line:1 char:27
+ $mailbox.EmailAddresses -= <<<< "eum:50004;phone-context=telExt5digits.lync5.com"
+ CategoryInfo : InvalidOperation: (op_Subtraction:String) [], RuntimeException
+ FullyQualifiedErrorId : MethodNotFoundHelp!Now for an answer - your remote session doesn't have the same object you have on the server itself. Notice it says this is an array list, not a ProxyAddressCollection. If you need to work around this, you'll need to massage the addresses another
way that the system will accept. I'd try the following:
$NewAddresses = $mailboxEmailAddresses | ? { $_ -notlike "eum:50004;phone-context=telExt5digits.lync5.com" }
See what you get in the $NewAddresses variable when you do this.
Maybe you are looking for
-
Getting error message when trying to print to HP photosmart 8050
When I try to print something, it stays in the print que as "pending" then says "error-printing". I using a dell inspiron 1525. My printer is connected by USB. Help!
-
Can't Change Standard Font Size in Preferences
I just got a new 24-inch iMac, which is great, but the screen is so big that web pages at the standard size are impossible to read at a comfortable distance. I went into Preferences and clicked on the "Appearance" tab, and set the standard and fixed-
-
Last version of ADT.xsd is obsolete to be used with JAXB 2.0?
When applying the JAXB 2.0 compilation to ADT.xsd, a java.lang.Exception occurs. The debugger informs that some of these XML Schema constructs are not supported by JAXB. As these unsupported constructs are included in the ADT.xsd schema, an error is
-
No matter what color selection I make on my HP ZR2240W monitor (Warm, Standard, Cool) it always reverts to RGB Custom at startup. Anyone know why that is? thanks saintmaur
-
Hello, I try to send a material idoc inbound via WE19 in my netweaver system. I can send an idoc via WE 19, but there is the msg that the function module is not allowed or it that there is no function module für aii_delinf_in. In WE42 I can configure