Update from OS X 10.4.11 to Leopard? or Snow Leopard?

I have an iMac with OS X 10.4.11 software. I need to upgrade to 10.5 or higher. Will I be able to jump right to Snow Leopard, or do I need to have Leopard first?

Hi WPIII, and a warm welcome to the forums!
Sorry to report, G4s & G5s cannot use/install/boot 10.6/Snow Leopard, 10.5/Leopard is as far as you can go...
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 2GB at least)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
You have to call Apple & likely ask for a Product Specialist to get it, if they still have it! Helps to tell them you have an iPad/iPhone & you can't run 10.6.
There are workarounds if the 867MHz is the only hangup...
http://sourceforge.net/projects/leopardassist/
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 2GB at least)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation

Similar Messages

How do i update from OS X 10.5.8 to leopard if it is no longer for purchase?

how do i update from OS X 10.5.8 to leopard if it is no longer for purchase?

Firstly, 10.5.8 IS Leopard. I think you mean Snow Leopard, in which case it is becoming increasingly difficult. Read through the column 'More like this" to your right >>>>>>> There are various suggestions there.

Update From 10.4 Tiger to 10.5 Leopard?

Hi,
I use a Power Mac G4 (QuickSilver 2002) Dual, OS X 10.4.11 Tiger.
Is it possible to update to OS 10.5 Leopard? If so, how so.
Angel

Check your QS meets the requirements. For best ops you need at least 1GB RAM.
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
The DVD should look like this
Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
 Cheers, Tom

Photoshop cc 2014 slow after update from mac os 10.9 to 10.10.2

hello
i have update from 10.9 to 10.10.2 i am using a mac pro 2012 2.4 ghz 6 cores 48GB ram and a NVIDIA Quadro K5000 3583 MB
since i update photoshop is extremely slow
any function takes much longer to render , and i am now trying to reverte to the back up runing 10.9.5 again but before that would liek to know if someone can please help me
towards any advice how to try to speed up photoshop been cc or cc2014
thanks
luis
Reply

Kitcateleven please see Error U44M1I210 | Install updates for information on how to resolve the U44M1I210 error.

Error in trying to update FROM Ovi Suite 2.1.1.1 t...

I am trying to update FROM Ovi Suite 2.1.1.1 to the newer version.
The download process NEVER ends.
2 screen shot are attached.
In the 2nd you clearly see some counter overrun (65518MB / 17MB).
I have already: uninstalled; download new version; installed.
Same scenario.
Any clue here?
Regards, Shay
Attachments:
1.jpg ‏12 KB
2.jpg ‏9 KB

FYI: system information:
Nokia Ovi Suite 2.1.1.1
Nokia PC Suite 7.1.40.1
PC Connectivity Solution 10.6.2.0
Connectivity Cable Driver 7.1.27.0
Nokia Ovi Suite Software Updater 2010.6.0.60359
Maps Service API 3.0.38.0
Nokia mPlatform 2.6.86
Ovi Desktop Sync Engine 1.1.0.82
Operating system:
Microsoft Windows XP 32-bit Edition, Service Pack 3
Language: English
Detected internet browsers:
- Microsoft Internet Explorer 8.0.6001.18702 (Default browser)
- Mozilla Firefox 3.6.3
Detected Bluetooth stacks:
- Microsoft (Version: 5.1.2600, Build: 5512)

Error in running baseline update from ATG

Hi,
I am trying to import the content in my ATG app schemas as indexed records into Endeca.
After making the configuration changes listed in the ATG-endeca integration guide , When I try to do baseline index from http://localhost:7003/dyn/admin/nucleus/atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin/ , following is what I get :
PreIndexing (Duration: 0:00:00)
     /atg/endeca/index/commerce/CategoryTreeService                COMPLETE (Succeeded)
RepositoryExport (Duration: 0:00:19)
     /atg/endeca/index/commerce/SchemaExporter      58      0      COMPLETE (Succeeded)
     /atg/endeca/index/commerce/CategoryToDimensionOutputConfig      9      0      COMPLETE (Succeeded)
     /atg/endeca/index/commerce/RepositoryTypeDimensionExporter      15      0      COMPLETE (Succeeded)
     /atg/commerce/search/ProductCatalogOutputConfig      31      0      COMPLETE (Succeeded)
EndecaIndexing (Duration: 0:02:18)
     /atg/endeca/index/commerce/EndecaScriptService                COMPLETE (Failed)
following is what I get in logs :
**** info Wed Dec 19 15:09:19 IST 2012 1355909959144 /atg/endeca/index/commerce/EndecaScriptService Starting script BaselineUpdate in application ATGen
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin --- atg.repository.search.indexing.IndexingException: Starting scrip
t BaselineUpdate of application ATGen failed
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.startScript(ScriptRunner.ja
va:276)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:307)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin Caused by :java.net.ConnectException: Connection refused: connect
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.AxisFault.makeFault(AxisFault.java:101)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.j
ava:154)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.strategies.InvocationStrategy.visit(Invocatio
nStrategy.java:32)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2767)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2443)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2366)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:1812)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at com.endeca.eac.client.ScriptControlPortSOAPBindingStub.startS
cript(ScriptControlPortSOAPBindingStub.java:263)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.startScript(ScriptRunner.ja
va:272)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:307)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin Caused by (#2):java.net.ConnectException: Connection refused: connect
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.PlainSocketImpl.socketConnect(Native Method)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.jav
a:213)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.Socket.connect(Socket.java:529)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
sorImpl.java:39)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
hodAccessorImpl.java:25)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.lang.reflect.Method.invoke(Method.java:597)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.components.net.DefaultSocketFactory.create(De
faultSocketFactory.java:153)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.components.net.DefaultSocketFactory.create(De
faultSocketFactory.java:120)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSende
r.java:191)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPS
ender.java:404)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.j
ava:138)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.strategies.InvocationStrategy.visit(Invocatio
nStrategy.java:32)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2767)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2443)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2366)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:1812)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at com.endeca.eac.client.ScriptControlPortSOAPBindingStub.startS
cript(ScriptControlPortSOAPBindingStub.java:263)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.startScript(ScriptRunner.ja
va:272)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:307)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin
P.S. - ALL the endeca services are running.
To add to surprise after this , I am unable to perform the baseline update from Endeca also. I get following error while running baseline update on endeca side :
[12.19.12 15:49:23] INFO: [ITLHost] Starting shell utility 'emgr_update_set_post_forge_dims'.
[12.19.12 15:49:32] SEVERE: Utility 'emgr_update_set_post_forge_dims' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.
Occurred while executing line 34 of valid BeanShell script:
31| // Upload the generated dimension values to Workbench
32| WorkbenchManager.cleanDirs();
33| Forge.getPostForgeDimensions();
34| WorkbenchManager.updateWsDimensions();
35|
36| // Upload the generated config to Workbench
37| WorkbenchManager.updateWsConfig();
[12.19.12 15:49:32] SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacComponentControlException
com.endeca.soleng.eac.toolkit.utility.Utility run - Utility 'emgr_update_set_post_forge_dims' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.
[12.19.12 15:49:32] INFO: Released lock 'update_lock'.
The above error persists even if I remove the application using --remove-app command and re-deploy new app with same name as previous one
Any help/pointer would really be appreciated.
Thanks,
Mayank Batra

Thanks Pankaj and Patrick.
My endeca installation works absolutely fine.
When i install endeca with platform services,mdex and tools and framework , I can create the application,initialize, load baseline and baseline update my application beautifully, until I do the baseline index from ATG side.
Once I do that , I am unable to perform indexing from Endeca also.
What I need to do is reinstall the endeca(platform services for least) to resolve this - I have been doing this for quite some time now :(
My Endeca Workbench instance is up, running and reachable on port 8006.
The PlatformServices\workspace\logs\shell\ATGen.emgr_update_set_post_forge_dims.log has following one liner :
ERROR: Could not open acquire_lock.status.
I tried running the baseline index from ATG again and following is what I get in logs this time around :
**** info Mon Dec 24 12:57:32 IST 2012 1356334052168 /atg/endeca/index/commerce/EndecaScriptService Starting script BaselineUpdate in application ATGen
**** info Mon Dec 24 13:05:03 IST 2012 1356334503729 /atg/endeca/index/commerce/EndecaScriptService Script BaselineUpdate for application ATGen finished with status Failed
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin --- atg.repository.search.indexing.IndexingException: Script Baselin
eUpdate for application ATGen failed
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.waitForScript(ScriptRunner.
java:381)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:319)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin Caused by :atg.repository.search.indexing.IndexingException: Script Base
lineUpdate of application ATGen failed
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.waitForScript(ScriptRunner.
java:378)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:319)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin
Regards,
Mayank Batra
Edited by: Waste Ideas on Dec 23, 2012 11:37 PM
Edited by: Waste Ideas on Dec 23, 2012 11:38 PM

Delta records not updating from DSO to CUBE in BI 7

Hi Experts,
Delta records not updating from DSO to CUBE
in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
I cheked in Change log table in DSO its have 5 records
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - -1
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
but active data table have one record - 0
how to corrcct the delta load??
Regards,
Jai

Hi,
I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
Is this not what you see in the cube? were the earlier req deleted from the cube?

Clients cannot download updates from DP

Dear Friends,
I need your help,
After I configured everything and I am ready to patch my first cycle I have problem with my clients.
I download all the updates and create my deployment package. I sent it to the DP.
The clients cannot download the updates from their DP. I checked the boundary and everything is ok.
I noticed that all pcs have the following error in the FSPstatemessage.log.
Failed in WinHttpSendRequest API, ErrorCode = 0x2ee7 FSPStateMessage 4/5/2015 1:53:36 AM 4844 (0x12EC)
[CCMHTTP] ERROR: URL=HTTP://SCCM01.XXX.YYYYY/SMS_FSP/.sms_fsp, Port=80, Options=224, Code=12007, Text=ERROR_WINHTTP_NAME_NOT_RESOLVED FSPStateMessage 4/5/2015 1:53:36 AM 4844 (0x12EC)
Successfully sent location services HTTP failure message.
Does the error above have to do with the client when tries to download the updates from the dp ?
How to solve the problem above ?
I forgot to mention that I have only one Site.
Please help
Nikkoscy

The client falls in a boundary that is assigned to a boundary group which gives access to the DP with the content and the deployment package is distributed on the server.
Please see below the ContentTransferManager.log, CAS.log, LocationServices.log .
any idea what is wrong ?
I can resolve the FQDN of the DP from the client. The DP is the server of the branch where the client locates.
Nikkoscy

Cannot get all updates from iTunes software

Hello. There is a strange problem.
Sometimes, when I open iTunes from my computer, a small number will be displayed after "Apps".
When I click the "Apps", I can also see that there are some updates available from the bottom link text.
But after I click that bottom link, I cannot get all programs which need to be update listed. When I update all listed, iTunes still says there are some apps to be updated, but when I click that bottom link, only a text "No updates are currently available. To check for updates for another Apple ID, sign in with that Apple ID."
At that time, I can get all updates from my iPhone - Apple Store. So all have to do, is update all apps from my iPhone and sync it back. But if some apps are not installed on this iPhone, I have no way to update it.
BTW, I've tried to click Store - Check for available downloads from iTunes on my computer. It's useless in this case.
Any solution? Thanks.

It think its a bug. I got the same results under MX 7.0.2.
The topic of maxrows recently came up on another thread. I
did some searching and according to TechNote 18339 there was a
change with maxrow
"<cfquery maxrows=N> bug. ColdFusion MX (until ColdFusion
MX 7.0.1 CHF2) didn't pass maxrows to the underlying driver
(statement.setMaxRows())"
Given the results you're getting, it sounds like CF is
applying the maxrow to all of the resultsets, not just the one
where maxrows was declared. I suspect cfstoredproc's usage of
statement.setMaxRows() is incorrect. Thats just a guess though.
Bottom line, I think you'll need handle it manually.
Personally, I would recommend placing the row count logic in the
stored procedure (if possible). The overall results will be more
consistent and you won't have to worry about this kind of issue
again.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_18339
http://livedocs.adobe.com/coldfusion/7/htmldocs/00000314.htm
http://www.remotesynthesis.com/blog/index.cfm/2006/3/23/Maxrows-Issue-in-CFQuery

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve .....

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve this issue. I have tried resetting it but nothing... Either I'm doing something wrong or....

I believe the issue is with the Apple ID that was used to purchase the App. If you download an App that was purchased under a different Appple ID then all updates will also be linked to the original purchaser's Apple ID. Your Apple ID is the the same ID as your iTunes, iCloud, etc. Some folks use different ID for the different Apple sites. No need for that One ID for all Apple Sites, and if someone else buys an App using their ID and they(you) download that App onto your device and that App requires an update it will ask for the purchasers Apple ID. This happens a lot when folks sell their iPad or give it to someone else and leave some purchased(free) Apps on the iOS device. You cannot change the original ID the App was purchased under. A suggestion would be if someone else has an App that you like but do not want to pay for use their ID or in the future have them gift the App to you.

I had over 200 e-mails. I went to my webmail and deleted most of them. However, my iPhone still shows 200 e-mails. How can I force my iPhone to update from the e-mail server? Or will I have to delete each e-mail from my iPhone as well? Thanks.

I had over 200 e-mails. I went to my webmail and deleted most of them. However, my iPhone still shows 200 e-mails. How can I force my iPhone to update from the e-mail server? Or will I have to delete each e-mail from my iPhone as well? Thanks.

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

HT1349 My computer popped up with an update from iTunes several days ago. I downloaded the update and when I went to open iTunes, it won't open. I've tried to download again from the website, but it still gives me this error message. Missing MSVCR80.dll

My computer popped up with an update from iTunes several days ago. I downloaded the update. When I went to open iTunes on my computer, it gives me the following error messages...
Missing MSVCR80.dll file.
Error 7 (Windows error 126)
I tried to download iTunes again from the website and repair the problem, to no avail. I've tried several times, but cannot get it to open. I have a Windows 7 machine. My iPhone 5 and iPad work fine and have not asked me to update. I've never had a problem with iTunes before. I hate to delete it entirely from my computer and start over. I'm afraid I'll lose all the music I have downloaded there. What do I do?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

FAGLFLEXT table is not updating from FAGLFLEXA

Hello Experts,
In thru which program the summarisatin table of FAGLFLEXT getting updated from table FAGLFLEXA .
We've updated some filed values like prctr , cost center to FAGLFLEXA but the same cumulative amount is not showing in the table period wise and there is a difference in balace sheet.
Pls advise, how to generate the table FAGLFLEXT to get my overall balances or how to run this table to go and do their own std calculations and updation.
Pls advise.
thanks & regards
sankar.

Thanks

Update showing up in "Compliance 5 - Specific Computer" Report even after removing the update from the Software Update before creating Group and Package

So I've created a Software Update Group and I did NOT want anything in there dealing with Internet Explorer 11 since the organization is currently stuck at using 10 as the highest. So I made sure that Internet Explorer was NOT in the list and then I deployed
the package.
After running my Overall Compliance report it shows that the systems are compliant, but when I view the "Compliance 5 - Specific Computer" I see that "Internet Explorer 11 for Windows 7 for x64-based Systems" is listed in the report.
This is just a testing phase right now and I have not created a WSUS like Domain level GPO. I understand that the SCCM client creates a local policy on the clients for the location of the Software Update Point (Specify
Intranet Microsoft update service location), but the "Configure Automatic Updates" policy is set to Not Configured, which it looks like when this
is set, the "Install updates automatically (recommended)" at 3AM is the default.
Is the reason why the "Internet Explorer 11 for Windows 7 for x64-based Systems" update is showing up in the list due to the fact that the "Configure
Automatic Updates" policy is set to Not Configured
and therefore it is still reaching out to check Windows Update online?
So, if I do create a Domain level GPO to Disable the "Configure
Automatic Updates" policy, then the "Internet Explorer 11 for Windows 7 for x64-based Systems" update would not show up in the "Compliance 5 - Specific Computer" report?
By the way, I have a Software Update Maintenance Window configured for the hours of 1AM-4AM so the 3AM default time falls within this time frame, therefore, I am assuming the SCCM 2012 client will not allow the Windows Update Agent to install the "Internet
Explorer 11 for Windows 7 for x64-based Systems" update, even though it has detected it is "Required".
Thanks

But, don't you need a Deployment Package in order to deploy the Software Update Group? The Software Update Group uses the downloaded updates contained in the Deployment Package located in, wherever the Package Source is, right?
One more quick question that you will know right off hand, because, well, you just will I'm sure.
No. The software update group really has nothing to do with any update packages. The update group assigns updates to clients and in turn clients use update packages to download assign and applicable updates from. There is no connection between the two though
as the client can download an update from any available update package. Thus, it's more than possible to updates in an update package that are not in any update groups and it is also possible for an update to be in an update group without being in any update
package.
If the "Configure Automatic Updates" policy is set to "Not Configured" and since this keeps the 3AM Automatic Updates default, if I was to remove the Software Update Maintenance Window from being between 1AM-4AM, will the WUA agent install updates
at 3AM, or no because the SCCM 2012 client still manages and oversees it and basically blocks that from occurring?
No, ConfigMgr does not in any way block the WUA; however, the WUA can only autonomously install updates it downloads directly from WSUS. Thus, since there are no updates approved or downloaded in your WSUS instance, there's nothing for it to download and
install. If you happen to actually be going into WSUS and approving updates (which you should not be doing as its unsupported), then yes, it actually would install updates -- this is outside of ConfigMgr's control though. Generally, disabling the WUA via a
GPO is the recommended to prevent any accidental installations or reboots (as the WUA wil also check for initiate pending reboots outside of ConfigMgr).
Lots more info in these two blog posts:
- http://blog.configmgrftw.com/software-update-management-and-group-policy-for-configmgr-what-else/
- http://blog.configmgrftw.com/software-updates-management-and-group-policy-for-configmgr-cont/
Jason | http://blog.configmgrftw.com

Win 7 PC freeze and block network access for other PC on same switch during windows update from WSUS

Hello,
It's been a problem for me for a long time now, but the last time (today) I found 3 PC on 2 different switches that block all the network on this 2 switches during the update.
I have a Domain with 80 PC with Win 7 (32&64bit) that takes the updates from the WSUS server that is configured on a Win2k8 r2. The system works well from 2 years from now but sometimes cause this errors that make me look like a dummy in front of angry
employees. If one of the PC get freeze , it will cause lost of connection on all the PC on same switch, and i have to find the blocked PC, remove from network, restart switch and hope that they will came back on.
Does anyone experienced this problem? Any help will be appreciated
Thank you!
List of updates for today below

Hi
Thanks for your response, yes I understand that the result is a Broadcast Storm and yes I have the cheapest switch on market :/.
The interest fact is that on one PC, I changed everything and keep only the old HDD and on last updates yesterday it was one of the blocked one too. So this make
me doubt that is something wrong in software on that PC. I don't have any third-part programs except browsers and all have Genuine Win7
The only investigation remained is what happens during the update process?
Is WSUS involved in something?
And another thing is the fact that some of the PC are cloned, but I have carefully changed the SID
Thank you for your support

Update from OS X 10.4.11 to Leopard? or Snow Leopard?

Similar Messages

Maybe you are looking for