Update gone wrong help please

Hi
I have an N95 8Gb, which I am trying to pdate to the latest software. I needed to do some updates on PC suite and Nokia updater ( as I havnt used either for a while ). I did a back up which seemed to work fine as I have a big content copie file. I then proceeded to update. The new software downloaded ok and started to install, it all seemed to be going OK until the pc lost connection with the phone. I got instructions to remove the cable, battery and re-connect ( can't just remember the exact order but I followed it ) and hit retry, it didn't re-connect so I tried several times. The software has now hung at this point, and I can only escape my disconnecting the USB. Now my phone won't boot or connect. Anyone, please where do I go from here ?
Many thanks
Steve

The article isn't mine, it was written by a friend who goes by the name "psychomania" round these parts.
If the phone does get bricked, a Nokia Care Point usually has the necessary hardware and software to revive it or can sent it off to a service centre where they definitely have what's needed. So, your assumption was correct.
The content copier file is so large because of all the additional stuff not in the ROM that's installed with the firmware. Stuff like Ngage, for example, which takes up about 15 MB all on its lonesome. Then there are third-party themes you may have installed, additional software, user files...
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

W510 bios update gone bad -- help please

Just went through a montly (+/-) update process through System Update.
Updated BIOS in my W510... along with a host of other things.. but from what I've
read i fear its the bios.
all went normally (as it always has).. machine rebooted after update.. stopped at the thinkpad
splash screen. Just hung there. I left it all day (figured it was doing something?) came back
at night, it was still hung.
tried to force reboot.. i got two beeps.. then three beeps.. nothing happened.
every time i pressed power button.. two beeps.. pause.. three beeps.
took out batt / restared .. no screen.. HD spins / fan spins / power light is on.. but machine
seems dead.
Anyone have any ideas whats going on? how to fix? was it the bios update? can it be rolled back?
Thanks in advance

Were you trying to use http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74858 ???
If so, we bricked several machines at the beginning of April and asked Lenovo to remove the update. I see that hasn't been done. Maybe now they will.

Hi i want to upgrade my iMac from Snow Leopard 10.6.8 to OS X Mavericks or OS X Yosemite. My software update menu dosnn´t find any updates available. Help please, what can i do to upgrade to OS X Mavericks or newer version?

Hi i want to upgrade my iMac from Snow Leopard 10.6.8 to OS X Mavericks or OS X Yosemite. My software update menu dosnn´t find any updates available. Help please, what can i do to upgrade to OS X Mavericks or newer version?

Open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, the computer's also incompatible with Mountain Lion and Mavericks; if desired, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(123636)

Getting error message2324 when downloading the new update for itunes help please

getting error message 2324 when downloading the latest update of itunes help please.
Will not let me uninstall itunes from my computer, gives me the message that I don't have access need administrator. ( I am the only user of this computer)
Thank you
Chris

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

IPOD DOESNT UPDATE!! HELP PLEASE!!!

i have the ipod video. it was workin fine but suddenly i tried to upload pictures but it says that a file its missing a file and cant update. i tried to restore it but then i couldnt upload music. then i reinstalled everything and it uploads music but it cant upload pictures. the way i upload is threw itunes. i right click then go ipod options then pictures. am i doing something wrong? please help.

AppleRoshan, just want are you saying? The wifi update (setting.General>Software Update) ws first introduced in iOS 5.
Please refrain from posting falsehoods in the future
AppleRoshan wrote:
Wireless software updating only comes with ios 7. So if you have ios 4 then upgrade it to 5 using itunes and you will get that

Nokia 5800 v50 firmware update gone wrong

Hey guys,
I installed v50 firmware over the air. I had to uninstall some programs because the update complained of lack of space, so I uninstalled Ovi client and related software and some location aware thing that I don't remember the name.
Then flashed the firmware... all went well, phone turned on.
While on the home screen after some seconds I got a message saying that something failed to install (it didn't say what). I still was able to use my phone however, now the camera software doesn't work.
Any tips ? Do I need to do a hard-reset on the phone and install firmware again ? And how can I do a hard-reset ?
Thanks a lot!

Yes, since there is a space problem a hard reset would be a good option before reinstalling. Remember that it deletes everything so make sure you have a backup.
A hard reset (x6, 5800 and 5230 only) is done by the following (warning, this deletes all data on your phone):
1.) Turn off the phone and remove battery for 5min
2.) Reinsert battery
3.) Press and hold the green, red and camera buttons. DO NOT LET GO.
4.) While holding the three buttons, press the power key to boot the phone up.
5.) Keep on pressing until you see the country selection screen.
A correctly done hard reset would show you that everything on the phone (contacts, messages, calendar entries, etc) would be deleted. So it is advisable to back them up. Upon restoration, do not restore settings or files if possible.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Menuweather lite app, how to permanately delete this from my app folder, it keeps telling me I cannot delete as it is on??? I don't trust this app, it also keeps asking for my password. I want it gone! Help please!

Does anyone know how to permanately delete this from the macbook pro? I can't trash it, as it keeps telling me it's on???? It also keeps asking for my password. I don't rust this application and I want if gone. I'm not a real techie, and I've spent way too much time trying to get rid of this. Help Please!

There's also a "quit" in the menubar. Once it's not active you can delete it.

IOS8 update gone wrong

Could do with some help please. While updating my phone to ios8 my laptop decided to shut down (got a dodgy battery and didn't realise the cable had fallen out). When I got back in to itunes my phone had the connect to itunes picture and when I do try and connect itunes just says "The iphone software server could not be contacted", and my phone isn't showing up to access.
Tried resetting both phone and laptop and nothing so far. At the moment I cant access my phone either through itunes or the phone itself. Any advice greatly appreciated!

Hi wbabbington,
Welcome to Apple Support Communities.
It sounds like there may be an issue with iTunes contacting the iPhone software update server from your computer. The article linked below provides a lot of great troubleshooting suggestions that will resolve most of the configuration issues that can prevent iTunes from communicating with the update servers.
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
I hope this helps.
-Jason

IOS update interrupted TWICE - help please!

Guys I need help please.
My internet connection is really bad. Last night, my iOS 6 update was 8 minutes from completion and my internet cut out, and about 5 minutes ago, my internet cut out again while my download was like 400 MB through.
Every time my internet cuts out, it completely restarts the download.
Is there any way I can find the downloads and start off from where they stopped?
Any help greatly appreciated!!

One option would be to manually download the *.ipsw files from another computer with a better connection and then install the IPSW from the first computer. I actually prefer this method, even in an environment like my work one where we have lots of bandwidth. It seems to be more reliable. If you have plenty of bandwidth you can download the *.ipsw files pretty quickly. At work I downloaded the 983 mb file in just over 2 minutes..so maybe try a public Internet place. Just do a search on ipsw download for iOS 6.

My laptop got formatted and so did all my itunes information like music, contacts, and games. So how can I get all that back because if I just plug my iPhone into the laptop all my stuuf that was on my phone will be gone? help please

My laptop got formatted and so did all my itunes information like music, contacts, and games. So how can I get all that back because if I just plug my iPhone into the laptop all my stuuf that was on my phone will be gone? help please

http://www.wideanglesoftware.com/touchcopy/index.php

I have changed my password on my iPhone but now my iPad won't allow me to lo in to anything or update...help please

I have changed my password on my iPhone but now my iPad won't allow me to lo in to anything or update...help please

Apple ID: “This Apple ID has been disabled for security reasons” alert appears
http://support.apple.com/kb/ts2446
Contact Apple Support
https://expresslane.apple.com/GetproductgroupList.action
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Look at this post https://discussions.apple.com/thread/5767569?tstart=60
 Cheers, Tom

I messed up migrating from old iMac to my shiny new one. I didn't turn off power saver. How do I start again, it's all gone wrong, help

I messed up migrating from old iMac to my shiny new one. I didn't turn off power saver. How do I start again, it's all gone wrong, help

Boot into recovery mode, launch Disk Utility and wipe the HD. Quit DU and restore the OS. On first boot, migrate properly, using the steps in Pondini's Setup New Mac guide.

Firmware update has gone wrong - help!

I downloaded the firmware update from Software Update and then installed as directed. My MacBook restarted and I heard the "bong" but now nothing is happening. The screen is black - not dead because the backlight seems to be on.
I've never had a problem with a software update and now I don't know what to do.
Any advice would be appreciated.

I've had this problem, too, when I got my MacBook back from repair (heatsink and logic board replaced). I'd hear the starting chime, the screen would go grey- not as bright as when I'd get to the apple logo before the blue login screen comes up, but not as dark as when it's turned off.
Do the following:
Restart PRAM:
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
If this doesn't work, try a PMU restart first http://docs.info.apple.com/article.html?artnum=303319 and then a PRAM restart.
Once you've booted into Mac OS X, go into the power management menu (you can get there via the battery/plug symbol on the top right side of your screen). Once you're in the menu, customize by turning off the option that the screen dims automatically after some time in order to save energy (do this for both profiles when it's running on battery and when it's plugged in). Try a restart, your computer should boot as usual. It seems the macbook turns down brightness to zero when it's booting, so you never get to the login screen, it just stays dark grey. If you turn off the dimming option it should work just fine. Strangely just using the keys that control brightness doesn't work.
I am sorry, I don't have my mac at hand right now, so I can't look up the exact words in the menu, but I hope this helps.

Lost photos and contacts with iOS 6.0.1 update on 3Gs HELP please

Recently updated iOS 6 onto 3GS and lost new contacts (weirdly have old contacts i thought id deleted) and photos. I backed everything up (at least I clicked for computer to do so when asked) I cannot find them on my computer or icloud.Have tried restoring backup via iTunes and nearing the end of completion error flashes with iPhone disconnected but I haven't disconnected the iPhone. I've tried this process 3 times now and continues to say the same thing. I'm really worried that I've lost my photos and contacts could someone please please help me. Thank you in anticipation.

No luck folks.
6.0.2 didnt resolve the pink flicker, Gonna get a replacement now.
Shucks!

HT1338 my mac needs updating-currently 10.5.8, but when i click on software update and it searches it says there are no software updates? any help please

I updated my iphone to IOS 6 which means i also need to update my itunes. When i tried to do this it said I need to update software but when I click on software update, it searches and then says no updates available. Can anyone help me please? thankyou very much

10.5.8 is the final version of Leopard. After that you need a paid-for upgrade to Snow Leopard - if your Mac can run it:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from download, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $30. You can also purchase the code to use to download Lion from the same number.
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.

Update gone wrong help please

Similar Messages

Maybe you are looking for