Update hadrware resources for CUCM in UCS

Hello all,
We have CUCM 8.6 running in UCS.
The ova file used before installing CUCM 8.6 on UCS was for less number of resources ( 1xvCPU, 1x80GB, 4GB RAM ).
I need to increase resources of VM, so instead of 1=vCPU & 1x80GB, 4GB RAM i want 2 vCPU and 2 x 80 GB, 6GBM RAM.
If i increase the number of vCPU, RAM & HD from vSphere Client manually, what is the risk in CUCM database, will it effect or it will be safe ?
Is there any way to upgrade the ova file in running VM instead of building new VM with new OVA file ?
Kindly help.
Regards,

Hello bernhardczapp,
We were upgrading CUCM 8.6 to 10.5 but unfortunately it failed with an error saying there is no disk space available, we opened case wtih cisco & we were advised to perform following tasks to free disk space:
Clear the logs is from RTMT tool, download the old log/traces and delete them from the server with this process:
1)      Login to RTMT
2)      Go to Trace & log central
3)      Select Collect File
4)      Select All service checkbox and All server checkbox, click next.
5)      Select a period of time. Select all the time frame for the logs that you do not need anymore, example from January until July. (Also there is a drop down so you can clear the ones from the inactive partition.)
6)      Select the Delete file Checkbox.
7)      Click finish
We followed procedure & after 8 hours it made 6495 MB space free. Before was 36444MB & after process 29949MB.
Reason i mentioned about new ova file for CUCM 10.5 is that while creating VM i will have option to select 7,500 users (this will give me 2x80GB, 2xvCPU, 1x6GB RAM)
I will try installing your suggested cop files & will update you. Do i need to restart Servers after cop file installation ?
But if you have alternate solution please share.
Kind Regards

Similar Messages

Maintenance contracts required for CUCM on UCS

Hello All,
I have a CUCM Ver 8.5 clustrer running on UCS C210M2 server. I would like to know is there is a single maintenance contract I can purchase from Cisco to cover both UCS hardware and CUCM software. Also CUCM is running on top of VMWare ESX server, should I require to get a separate maintenance for VMWare as well ?
Thanks in advance for the reply.
Mohsin

First, let me make sure we're using the same terminology before I answer:
Contract - The contract number that is tied to your CCO user ID and your equipment
Maint Agreement - Your hardware or software coverage.
My understanding is that you cannot put your hardware and software on the same agreement for a number of reasons. But there is no reason that all of your agreements can't be put under the same contract number. Often, hardware and software will be on seperate POs, etc. and will end up under separate contract numbers, making things a pain. I would work with your Cisco rep to see if you can combine all of your agreements under a single contract number. I don't see why it would be an issue. If they can't do this with existing contracts, then in the future I would talk with my rep about ensuring that all future purchases get tied to the same contract number.

Is it possible to update standard rate for an enterprise resource using CSOM

We are facing issues while updating standard rate for any enterprise resource using CSOM. The field standard rate is not available in the enterprise resource. Is it possible to update the standard rate for any resource using CSOM ?
Thanks in advance for any help.

Hi Vikas,
You can do it via the PSI.
Please find below a blog post with a PSI code sample for updating the resources standard rate:
https://epmxperts.wordpress.com/2011/01/30/update-resource-cost-rate-using-psi/
In addition, here is a blog post by Brian about a PSI bug while updating the resource rate:
http://blogs.technet.com/b/projectsupport/archive/2013/02/12/project-server-resource-rates-changed-with-psi-not-seen-in-project-professional.aspx
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Auto Update of Resource form

In my OIM I have configured AD User resource for provisioning and I've provisioned about 100 users.
Then I've updated AD User resource form to version 2 and made this version active.
But when I view resource profile (for AD User) for any of users that were provisioned before form update, I can still see the old version of form. And I have to revoke and then re-provision these users before I can see 'version2' in their resource profile.
For any user that was provisioned AFTER form 'version2' was made active, I can see the new version of resource form.
I need that all users to have the new version of form automatically after it's made active (without manual re-provisioning them)
Is there any other way, such as using Xellerate API to assign the new version of form to all users that have AD User resource?
I guess first I have to retrieve the list of all AD Users and then make a loop for re-assigning the form...

There is a utility available for changing form versions.
http://download.oracle.com/docs/cd/B32479_01/doc.903/b32453/appc.htm#sthref389
I haven't used it myself, but i know i've seen other posts regarding it.
-Kevin

FAQ: What are the best resources for Premiere Pro CS6?

Here are high quality resources for troubleshooting and tutorials related to Premiere Pro CS6.
Premiere Pro CS6 troubleshooting articles
Issue: I'm having trouble downloading and installing Premiere Pro CS6. What do I do?Answer: See troubleshooting documents, post in the appropriate forum, or contact support.
More info: http://blogs.adobe.com/aftereffects/2013/09/troubleshooting-issues-with-downloading-and-in stalling-after-effects.html
Issue: What are the system requirements for Premiere Pro CS6?See this article: http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe%20Premiere%20Pro%20CS6% 20system%20requirements
Issue: Why won't Premiere Pro CS6 play back AVCHD media?Answer: Update to Premiere Pro CS6 (6.0.5). Previous versions of CS6 had this issue.
More info: http://blogs.adobe.com/premierepro/2013/08/premiere-pro-cs6-6-0-4-update.html
Issue: Does Premiere Pro CS6 work with OS X 10.9 (Mavericks)?Answer: Yes, make sure you update to Premiere Pro CS6 (6.0.5)
More info: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Issue: Is there a trial available for Premiere Pro CS6?Answer: Yes, subscribe to the free version of Creative Cloud, then download the trial.
Issue: I'm having unexpected behavior in Premiere Pro CS6 and want to trash preferences. How do I do that?Answer: See this blog post: http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html#more-537
Issue: I'm getting errors related to QuickTime. What do I do?Answer: See this blog post for troubleshooting items related to QuickTime: http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
Premiere Pro CS6 tutorials
Issue: I'm new to Premiere Pro CS6. How do I get started?Answer: See this blog post: http://blogs.adobe.com/kevinmonahan/2011/05/20/getting-started-with-adobe-premiere-pro-cs4 -cs5-cs5-5/
Issue: I'm switching to Premiere Pro CS6 from Final Cut Pro 7. Are there any tips for me?Answer: See this article by Scott Simmons on Pro Video Coalition: http://provideocoalition.com/ssimmons/story/105_adobe_premiere_pro_cs6_questions_answered
Issue: I just switched to Premiere Pro CS6 from Final Cut Pro 7. Are there any missing features between the applications?Answer: See this article: http://provideocoalition.com/ssimmons/story/10_fcp_things_fcp_editors_might_be_missing_in_ adobe_premiere_pro_cs6
Issue: Are there any good, free Premiere Pro CS6 tutorials available?Answer: See these tutorials: http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
Issue: How do I optimize Premiere Pro CS6 for best performance?Answer: See this article: https://www.video2brain.com/en/courses/after-effects-premiere-pro-performance-workshop
Issue: How do I operate the multicam function in Premiere Pro CS6?See this article: http://provideocoalition.com/ssimmons/story/working_with_multicam_in_adobe_premiere_pro_cs 6

Hi ..
GO to website www.Apache.org
down load Apache tomcat server .
install it ...
Go to sun site
c and download jsp tutorials ...
Go to
(www.coreservlets.com)download book core servlets
u can find lots of nice books supported by sun on sunwebsite ...
Now u r equipped ....
start doing everything (R &D) on server ..
Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
I thing once u go through this ..it will do all what u want
Hope it helps
Best of Luck :)
regds & take care

"Missing signed entry in resource" for only some users

Hi,
I have recently updated my .jnlp file and .jar file and added some extra jar resources in the new jnlp.
Since this new version, some users receive an error saying
"Missing signed entry in resource:" for one particular resource.
While for other users it works fine.
I have signed the jar with jarsigner.
Does anyone have an idea what could be the problem here?
Thanks very much in advance,
Best regards,
Stein Aerts,
University of Leuven, Belgium

I remember hearing something like this, and had to do with :
1.) what version of jarsigner was used to sign the jar, and
2.) what version of JRE was used to validate the signed jar file on the client.
(including US only vs. International version of JRE)
For the jar that gets this error:
Does it have any empty directories in it., or does it have entries with non-english characters in the resource names ?
What version of the JDK was used to run jarsigner to sign this jar, and what jre is the application running on ?

How to update BLOB resource ???

Hi,
I've created BLOB resource successfully.
But after my attempt to update it using
UPDATE resource_view SET res=updatexml(res,'/Resource/Contents/*',blob_res)
WHERE any_path= '/path';
I get an error
ORA-06550: line 17, column 7: PL/SQL: ORA-00932: inconsistent datatypes: expected NUMBER got BLOB ORA-06550: line 15, column 3: PL/SQL: SQL Statement ignored
I need a help !!!
Thanks
Viacheslav

Please note that technically updating XDB$RESOURCE directly is not supported.....
open mdrake-lap 2100
user XDBTEST XDBTEST
cd /home/XDBTEST
ls -l
put "RedwoodShores.jpg" "RedwoodShores.jpg"
ls -l
get "RedwoodShores.jpg" "RedwoodShores.jpg.out"
quit
Connected to mdrake-lap.
220 mdrake-lap FTP Server (Oracle XML DB/Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
331 pass required for XDBTEST
230 XDBTEST logged in
250 CWD Command successful
200 PORT Command successful
150 ASCII Data Connection
drw-r--r-- 2 XDBTEST oracle 0 MAR 22 10:13 xsd
226 ASCII Transfer Complete
ftp: 59 bytes received in 0.25Seconds 0.24Kbytes/sec.
200 PORT Command successful
150 ASCII Data Connection
226 ASCII Transfer Complete
ftp: 352071 bytes sent in 0.88Seconds 399.17Kbytes/sec.
200 PORT Command successful
150 ASCII Data Connection
-rw-r--r-- 1 XDBTEST oracle 352071 MAR 22 10:13 RedwoodShores.jpg
drw-r--r-- 2 XDBTEST oracle 0 MAR 22 10:13 xsd
226 ASCII Transfer Complete
ftp: 132 bytes received in 0.00Seconds 132000.00Kbytes/sec.
200 PORT Command successful
150 ASCII Data Connection
226 ASCII Transfer Complete
ftp: 352071 bytes received in 0.08Seconds 4400.89Kbytes/sec.
221 QUIT Goodbye.
open mdrake-lap 2100
user XDBTEST XDBTEST
cd /home/XDBTEST
ls -l
get "RedwoodShores.jpg" "output1.jpg"
quit
Connected to mdrake-lap.
220 mdrake-lap FTP Server (Oracle XML DB/Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
331 pass required for XDBTEST
230 XDBTEST logged in
250 CWD Command successful
200 PORT Command successful
150 ASCII Data Connection
-rw-r--r-- 1 XDBTEST oracle 352071 MAR 22 10:13 RedwoodShores.jpg
drw-r--r-- 2 XDBTEST oracle 0 MAR 22 10:13 xsd
226 ASCII Transfer Complete
ftp: 132 bytes received in 0.00Seconds 132000.00Kbytes/sec.
200 PORT Command successful
150 ASCII Data Connection
226 ASCII Transfer Complete
ftp: 352071 bytes received in 0.18Seconds 1955.95Kbytes/sec.
221 QUIT Goodbye.
SQL*Plus: Release 10.1.0.2.0 - Production on Mon Mar 22 11:14:00 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> spool testcase.log
SQL> set trimspool on
SQL> --
SQL> set timing on
SQL> set long 10000
SQL> set pages 10000
SQL> set feedback on
SQL> set lines 132
SQL> --
SQL> connect sys/oracle as sysdba
Connected.
SQL> --
SQL> alter session set current_schema = XDB
2 /
Session altered.
Elapsed: 00:00:00.01
SQL> create or replace package XDB_EXAMPLES
2 AUTHID DEFINER
3 as
4 procedure updateResource(path VARCHAR2,content BLOB);
5 end;
6 /
Package created.
Elapsed: 00:00:00.12
SQL> show errors
No errors.
SQL> --
SQL> select * from all_errors where owner = 'XDB'
2 /
OWNER NAME TYPE SEQUENCE LINE POSITION
TEXT
ATTRIBUTE MESSAGE_NUMBER
XDB XDB_EXTENSIONS PACKAGE 1 4 42
PLS-00103: Encountered the symbol "(" when expecting one of the following:
:= . ) , @ % default character
The symbol ":=" was substituted for "(" to continue.
ERROR 103
1 row selected.
Elapsed: 00:00:00.03
SQL> create or replace package body XDB_EXAMPLES
2 as
3 --
4 procedure updateResource(path VARCHAR2,content BLOB)
5 is
6 RESID RAW(16);
7 begin
8 select RESID
9 into RESID
10 from RESOURCE_VIEW
11 where equals_path(res,path) = 1;
12 -- Not really supported...
13 update XDB.XDB$RESOURCE R
14 set R.XMLDATA.XMLLOB = content
15 where object_id = RESID;
16 commit;
17 end;
18 --
19 end;
20 /
Package body created.
Elapsed: 00:00:00.01
SQL> show errors
No errors.
SQL> --
SQL> select * from all_errors where owner = 'XDB'
2 /
OWNER NAME TYPE SEQUENCE LINE POSITION
TEXT
ATTRIBUTE MESSAGE_NUMBER
XDB XDB_EXTENSIONS PACKAGE 1 4 42
PLS-00103: Encountered the symbol "(" when expecting one of the following:
:= . ) , @ % default character
The symbol ":=" was substituted for "(" to continue.
ERROR 103
1 row selected.
Elapsed: 00:00:00.01
SQL> grant execute on XDB_EXAMPLES to public
2 /
Grant succeeded.
Elapsed: 00:00:00.03
SQL> create or replace public synonym XDB_EXAMPLES for XDB_EXAMPLES
2 /
Synonym created.
Elapsed: 00:00:00.00
SQL> connect &1/&2
Connected.
SQL> --
SQL> declare
2 targetFile BFILE;
3 content BLOB;
4 begin
5 targetFile := BFILENAME(USER,'&4');
6 DBMS_LOB.fileopen(targetFile, DBMS_LOB.file_readonly);
7 DBMS_LOB.createTemporary(content,true,DBMS_LOB.SESSION);
8 DBMS_LOB.loadFromFile(content,targetFile,dbms_lob.getLength(targetFile),1,1);
9 XDB_EXAMPLES.updateResource('/home/&1/&3',content);
10 DBMS_LOB.freeTemporary(content);
11 DBMS_LOB.fileclose(targetFile);
12 commit;
13 end;
14 /
old 5: targetFile := BFILENAME(USER,'&4');
new 5: targetFile := BFILENAME(USER,'Concorde.jpg');
old 9: XDB_EXAMPLES.updateResource('/home/&1/&3',content);
new 9: XDB_EXAMPLES.updateResource('/home/XDBTEST/RedwoodShores.jpg',content);
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.77
SQL> quit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
open mdrake-lap 2100
user XDBTEST XDBTEST
cd /home/XDBTEST
ls -l
get "RedwoodShores.jpg" "output2.jpg"
quit
Connected to mdrake-lap.
220 mdrake-lap FTP Server (Oracle XML DB/Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
331 pass required for XDBTEST
230 XDBTEST logged in
250 CWD Command successful
200 PORT Command successful
150 ASCII Data Connection
-rw-r--r-- 1 XDBTEST oracle 235782 MAR 22 10:13 RedwoodShores.jpg
drw-r--r-- 2 XDBTEST oracle 0 MAR 22 10:13 xsd
226 ASCII Transfer Complete
ftp: 132 bytes received in 0.00Seconds 132000.00Kbytes/sec.
200 PORT Command successful
150 ASCII Data Connection
226 ASCII Transfer Complete
ftp: 235782 bytes received in 0.22Seconds 1071.74Kbytes/sec.
221 QUIT Goodbye.
-rwxrwxrwa 1 mdrake None 235782 Aug 9 2003 Concorde.jpg
-rwxrwxrwa 1 mdrake None 352071 Aug 9 2003 RedwoodShores.jpg
-rwxrwxrwa 1 mdrake None 352071 Mar 22 11:14 output1.jpg
-rwxrwxrwa 1 mdrake None 235782 Mar 22 11:14 output2.jpg
$
$

"Unable to update local resource group" error

Hello,
I'm having a problem updating one of my local resource groups in RD Gateway Manager.
We're on 2008 R2 SP1, and have a gateway in between us and another company. When a user needs to access their computer in the other company, we add the machine to the local group, and the account the AD RAP group, it works fine.
However, every couple of weeks, it will not allow me to update the local resource group for computers. I receive the error "WMI Failure: Unable to update local resource group" ..and apparently google cannot find another instance of this error happening -
no results at all - very odd. So the normal fix is to just recreate the RAP.xml file, then add the machines in again, but this is not a good enough fix long term, plus it misses the machines that are switch off when i recreate.
Also - this will be logged in eventvwr TerminalServices-Gateway
"The resource group "MY GROUP NAME" could not be updated. The following error occurred: "23106". To resolve this issue, ensure that you have configured resource group settings correctly and set the correct value and permissions for the RAP.xml file and the
RAPStore registry key."
Google also cannot find anything for that error, OR that 23106 error code - I cannot get results no matter what I do. It cannot be permissions as I've checked them, and it works for a bit. I've ran the WMI diagnostics, and they're fine, no different to any
other server in the environment.
I've also checked these forums and there is nothing on there. Does anyone know the relevance of that error code, or where I can check it out?
Cheers,
Jon

I can confirm ..MPIN..'s solution fixes it.
I had the exact same problem; I'd recently added a new server, and stopped the old server before decomissioning. Adding the new serer to the TS RAP policy server didn't work and generated the OP's error.
I removed the old server name (which was not pingable) and the group COULD be updated.
Really crappy error handling - this is a defect and should be fixed. A proper error would say "Not all machines in this group are valid, please remove the invalid entries" OR simply allow 'ok' without double checking (after all, the names are checked
when adding).
So often we accept shoddy software by proposing work arounds as 'the fix'. The actual fix is to fix the software to be more descriptive and/or handle errors more gracefully.
== John ==

Hello Sir I have an iPhone 4 and when i updated that it got updated but now for restore the data it is showing me the message The "iPhone" could not be activated because an unknown error occurred (0xE8000004). Please try again later. please help me.

Hello Sir I have an iPhone 4 and when i updated that it got updated but now for restore the data it is showing me the message The "iPhone" could not be activated because an unknown error occurred (0xE8000004). Please try again later. please help me.

Hello Amarchand Sharma,
Are you working with a Windows computer? If so, the resource below may help you troubleshoot the issue you are having restoring your iPhone.
iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support
http://support.apple.com/en-us/TS3221
Regards,
Judy

FAQ: What are the best resources for After Effects CS6?

Listed are select troubleshooting and "how to" resources for After Effects CS6.
After Effects CS6 troubleshooting resources
I'm having trouble downloading and installing After Effects. What do I do?See troubleshooting documents, post in the Downloading, Installing, Setting Up forum, or contact support. For details, see this blog post or this FAQ.
What are the system requirements for After Effects CS6?See this article.
Does After Effects CS6 work with Mac OS X 10.9 (Mavericks)?Yes, update to After Effects CS6 (11.04) for that capability. More info in this blog post.
How do I prevent After Effects CS6 from crashing when I use Illustrator files?Prevent this issue by turning off the preference Create Layer Markers from Footage XMP Metadata in the Media & Disk Cache preferences category. More info in this blog post.
I can't open the composition mini-flow chart. What do I do?See the workarounds in the following blog post.
Is there a 30 day trial available for After Effects CS6?Yes, subscribe to the free version of Creative Cloud, then download After Effects CS6. More info here.
I'm getting errors related to QuickTime. What do I do?See this blog post for troubleshooting items related to QuickTime.
What are the GPU related features in After Effects CS6?See this blog post for details.
Do I need new plug-ins for After Effects CS6?See this blog post for information.
I'm getting errors after applying the 3D Camera Tracker or Warp Stabilizer to a long clips in After Effects CS6. What do I do?See this blog post for more information.
After Effects CS6 Tutorials
How do I get started with After Effects CS6?See this blog post.
Where can I find tutorials for learning After Effects CS6?
See this blog post.
See also this collection of tutorials.
Issue: What are the top new and changed features in After Effects CS6?See this blog post.
Issue: How do I optimize After Effects CS6 for best performance?See this article.

Hi ..
GO to website www.Apache.org
down load Apache tomcat server .
install it ...
Go to sun site
c and download jsp tutorials ...
Go to
(www.coreservlets.com)download book core servlets
u can find lots of nice books supported by sun on sunwebsite ...
Now u r equipped ....
start doing everything (R &D) on server ..
Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
I thing once u go through this ..it will do all what u want
Hope it helps
Best of Luck :)
regds & take care

Can't find resource for bundle com.plumtree.portlet.util.PortletResourceBundle

Hi,
I'm trying to integrate Business Objects XI portlets and I received this error:
An error has occuredCan't find resource for bundle com.plumtree.portlet.util.PortletResourceBundle, key jsp.ExplorerView.CorporateDocuments Can't find resource for bundle com.plumtree.portlet.util.PortletResourceBundle, key jsp.ExplorerView.CorporateDocuments java.util.MissingResourceException: Can't find resource for bundle com.plumtree.portlet.util.PortletResourceBundle, key jsp.ExplorerView.CorporateDocuments at java.util.ResourceBundle.getObject(ResourceBundle.java:314) at java.util.ResourceBundle.getString(ResourceBundle.java:274) at com.businessobjects.portlets.jsr168.enterprise.common.ExplorerHelper.getResourceString(Unknown Source) at jsp_servlet._jsp.__errormessage._jspService(__errormessage.java:206) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:622) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:412) at com.plumtree.portlet.impl.PortletRequestDispatcherImpl.include(PortletRequestDispatcherImpl.java:118) at com.businessobjects.portlets.jsr168.enterprise.explore.Explorer.doView(Unknown Source) at javax.portlet.GenericPortlet.doDispatch(GenericPortlet.java:235) at javax.portlet.GenericPortlet.render(GenericPortlet.java:163) at com.plumtree.portlet.servlet.PortletServlet.service(PortletServlet.java:277) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6452) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118) at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661) at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178) Does anybody know what could be wrong? What am I missing?Thanks a lot!Claudia

hi Clinton,
I'm using the last version available in the Product center (I think it is 1.03).
The portlet.xml file is the one that comes with the BO portlets (see below).
Thanks a lot!
<?xml version="1.0" encoding="UTF-8"?>
<portlet-app xmlns="http://java.sun.com/xml/ns/portlet/portlet-app_1_0.xsd"
version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/portlet/portlet-app_1_0.xsd http://java.sun.com/xml/ns/portlet/portlet-app_1_0.xsd"
id="BusinessObjects Enterprise Portlets">

<portlet>
<portlet-name>BOPortlet</portlet-name>
<display-name xml:lang="en">ListPortlet</display-name>
<portlet-class>com.businessobjects.portlets.jsr168.enterprise.explore.Explorer</portlet-class>

<init-param>
<name>Help Path</name>
<value>/jsp/help/</value>
</init-param>


<init-param>
<name>Show toolbar in footer</name>
<value>true</value>
</init-param>
<init-param>
<name>Show unavailable documents</name>
<value>true</value>
</init-param>
<init-param>
<name>Allow subscription</name>
<value>true</value>
</init-param>
<init-param>
<name>Allow searching</name>
<value>true</value>
</init-param>
<init-param>
<name>Rows per page</name>
<value>50</value>
</init-param>
<init-param>
<name>Row separator</name>
<value>lines</value>
</init-param>
<init-param>
<name>Separator_Color_Front</name>
<value>#FFFFFF</value>
</init-param>
<init-param>
<name>Separator_Color_Back</name>
<value>#F0F8FF</value>
</init-param>
<init-param>
<name>Selected row bgcolor</name>
<value>#4682B4</value>
</init-param>
<init-param>
<name>Allow Paging</name>
<value>true</value>
</init-param>

<init-param>
<name>Custom sub-location</name>
<value>23</value>
</init-param>
<init-param>
<name>Remember active location for user</name>
<value>false</value>
</init-param>
<init-param>
<name>ActiveLocation</name>
<value>23</value>
</init-param>
<init-param>
<name>Open document in new window</name>
<value>true</value>
</init-param>
<init-param>
<name>ShowNavigationDropDown</name>
<value>true</value>
</init-param>
<init-param>
<name>Allow Personal Inbox access</name>
<value>true</value>
</init-param>
<init-param>
<name>Allow Personal Documents access</name>
<value>true</value>
</init-param>
<init-param>
<name>Allow Personal Categories access</name>
<value>true</value>
</init-param>
<init-param>
<name>Allow Corporate Documents access</name>
<value>true</value>
</init-param>
<init-param>
<name>Allow Corporate Categories access</name>
<value>true</value>
</init-param>

<init-param>
<name>Show Alerts</name>
<value>true</value>
</init-param>
<init-param>
<name>Show Type</name>
<value>true</value>
</init-param>
<init-param>
<name>Show From</name>
<value>true</value>
</init-param>
<init-param>
<name>Show Updated</name>
<value>true</value>
</init-param>
<init-param>
<name>Show Availability</name>
<value>true</value>
</init-param>
<init-param>
<name>Show Folder</name>
<value>true</value>
</init-param>
<init-param>
<name>Show Category</name>
<value>true</value>
</init-param>
<init-param>
<name>Show Keyword</name>
<value>true</value>
</init-param>
<init-param>
<name>Show Author</name>
<value>true</value>
</init-param>

<init-param>
<name>Logging</name>
<value>none</value>
</init-param>
<init-param>
<name>Enable Logging</name>
<value>true</value>
</init-param>
<expiration-cache>0</expiration-cache>
<supports>
<mime-type>text/html</mime-type>
<portlet-mode>view</portlet-mode>
<portlet-mode>edit</portlet-mode>
<portlet-mode>help</portlet-mode>
</supports>
<supported-locale>en</supported-locale>
<supported-locale>fr</supported-locale>
<supported-locale>ja</supported-locale>
<supported-locale>zh_CN</supported-locale>
<supported-locale>es</supported-locale>
<supported-locale>it</supported-locale>
<supported-locale>zh_TW</supported-locale>
<supported-locale>ko</supported-locale>
<supported-locale>de</supported-locale>
<supported-locale>nl</supported-locale>
<resource-bundle>com.businessobjects.portlets.jsr168.enterprise.common.Strings</resource-bundle>
<portlet-info>
<title>BOPortlet</title>
</portlet-info>
<portlet-preferences>
<preference>
<name>Submit on Click</name>
<value></value>
<read-only>false</read-only>
</preference>
<preference>
<name>Show toolbar in footer</name>
<read-only>false</read-only>
</preference>
<preference>
<name>Show unavailable documents</name>
<read-only>false</read-only>
</preference>
<preference>
<name>Allow subscription</name>
<read-only>false</read-only>
</preference>
<preference>
<name>Allow searching</name>
<read-only>false</read-only>
</preference>
</portlet-preferences>
</portlet>
</portlet-app>

[svn:bz-4.0.0_fixes] 21088: Update readme. txt for tomcat authentication to include setup instructions for Tomcat 7.

Revision: 21088
Revision: 21088
Author:   [email protected]
Date:     2011-04-15 09:50:24 -0700 (Fri, 15 Apr 2011)
Log Message:
Update readme.txt for tomcat authentication to include setup instructions for Tomcat 7.
checkintests: not run. not code change.
Modified Paths:
    blazeds/branches/4.0.0_fixes/resources/security/tomcat/readme.txt

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Presence for CUCM

Cisco Unified Communications Manager has built in presence functionality for IP Telephony.
Is there any way to pull presence information off of CUCM to integrate into a Web App - or to aggregate in a presence server elsewhere?
Does Cisco Unified Application Sever API's pull presence from CUCM, CUPS, or both? Can it update presence information as well?
Is Cisco Unified Presence REQUIRED to do this? Or is there some interface that would allow this without having to install CUPS?

You may want to post in the "ask the expert" forum for presence. Michael Luo is hosting it and is "inhouse" expert here
But basically, if you can figure out how the IP phone pulls presence information from CUCM to the screen of the phone, you should be able to do the same for your web app.
Basically, there is a IP Phone Service for CUCM and the Cisco IP phone when you browse the Corp Directory, it will show if the person is on/off hook. I have not used it personally, but it does populate.
CUPS uses a SIP PUBLISH trunk from CUCM. Whenever a phone status changes, it publishes the information to the SIP trunk. The receiving end (CUPS) will then digest the information and push it out the CUPC clients.

Looking for help to update the certificate for my Exchange Email Account...

I'm trying to update the certificate for my Exchange Email Account...Dell had me delete the account, install the new certificate on my phone, and set up the email again...But it still won't work and acts like it can't find/use the new cert. Any suggestions besides a hard resest of the phone?

That's a great question, LSchmitz!
Is the e-mail account on your cell phone? Which device? If its on your phone, an Exchange e-mail, may need to be provisioned/ set up by your employer/ IT department.
VanessaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

There was a problem updating InDesign CC For more information see the specific error below. Update Failed Download error. Press Retry to try again or contact customer support.(49)

Posted the entire text from the error window, when trying to update, using the normal NON-TECHIE way to update any and all Adobe CC products, via the Creative Cloud updater installed when Adobe Creative Cloud subscription was purchased when first offered.
The following occurs, ad nauseam:
There was a problem updating InDesign CC
For more information see the specific error below.
Update Failed
Download error. Press Retry to try again or contact customer support.(49)
Here's the crux of my frustration:
(1) Customer Service is NOT contact-able, to receive LIVE help.
(2) There is NO way for me to mitigate this "Download error", being a student learning InDesign, and NOT in any way capable of tweaking folders/files here and there.
Therefore, the real question:
Given that a significant number of subscribers are having the above referenced issue with attempting to download the current update for InDesign, WHAT ARE WE SUPPOSED TO DO, in order to get our contractually paid-for updates to our legally and contractually paid-for Adobe software, specifically in my case, InDesgin's current update?
Please, NO TECHNICAL mumbo-jumbo which most likely will cause the overwhelming majority of users, like me, to seriously corrupt their computer files, but rather an honest, straightforward "what to do" from real CS/Engineers working for Adobe, as to how to FIX this issue, period.
===========================================================
UPDATE:
Here is a way in which I think I was able to "update" my InDesign CC application:
(1) Sign-In to your Adobe Account
https://www.adobe.com/
(2) Click on the MENU icon
(3) Click on the product InDesign icon
Your browser should display the page for Adobe InDesign CC
https://www.adobe.com/products/indesign.html?promoid=KLXLU
(4) Click on the Download icon,
Your browser should now display the page to download InDesign,
https://creative.adobe.com/products/download/indesign
(5) a Pop-Up window should open, and display:
Launch Application
This link needs to be opened with an application.
with the first option to select being the CreativeCloud(URIHandler)
(5) Select this application and click OK.
What happened when I followed steps (1) thorugh (5) is that:
(a) InDesign CC(2014) was installed,
(b) InDesign CC, updated, and then
(c) InDesign CC(2014), also updated.
Why this all worked, is a mystery to me.
Looks like a separate, "new" version of InDesign, InDesign CC(2014), was installed, the existing "old" InDesign was updated, and then the newly installed Indesign CC(2014) was further updated.
A BIT MORE, when I launched my InDesign CC app, and checked to see if there were Updates Available, there in fact was an Adobe InDesign CC 64 bit (9.2.2) update.
I clicked on UPDATE and my "old" InDesign CC app was "successfully updated."
FURTHER INFO: I may have neglected to list some important info ... OS: Windows 8.1 Pro with Media Center, 64-bit
Confused, I am able to launch BOTH of these apps, and hopefully I may use one of these versions of the InDesign CC app, to do some InDesign work.
Will keep y'all posted!
Message was edited by: Richard Yapkowitz, about an hour after I first posted this issue.

Jackdan error 49 indicates the installer was unable to access a critical file or directory. You can find additional details at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

Update hadrware resources for CUCM in UCS

Similar Messages

Maybe you are looking for