Update Installation not working properly.

I had to send my lenovo back to get fixed 1 month ago.
I get it back and adobe reader wants to install an update automatically
It doesn't even give me a choice, which pisses me off.
The reader program then decides to restart, automatically.  It went through step 1, then on step 2 of 7 it STOPPED installing.
It just STALLED and has been "stuck" on 2 of 7 for 2 hours now.
I WILL be forced to turn off my machine.
WHY the hell did this happen?  If it screws up my OS Adobe needs to fix it.
Oh and I've been waiting on hold for your tech support for over an hour and a half now.  The wait time was supposedly 30 minutes.
I'm pissed.

It would seem like the Windows Updates are being installed on your machine. Step 1/2/...7 of 7 wqoudl indicate that Windows Update are bineg installed cause non of the Adobe Reader Updates display information in that fashion.
Also, can you please recheck the setting indicated in the Updater Preferences to see what is the Update Mode set on your system for the Reader application. You can check the same by clicking on Edit > Preferences > Updater.

Similar Messages

  • Adobe desktop app updater is not working properly

    Trying to update adobe desktop app but its giving me this popup
    accept button ( which is in right side) is not working. When I press cancle button (left side button) getting another popup
    I have no idea what to do...!!

    Well... that says that you must use an ADMINISTRATOR computer account, not a simple user account
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq may help

  • IOS 6 update = Speaker not working properly

    My speaker was fine and I have no reason to believe there are any hardware issues. As soon as I updated my iOS 5.1.1 to the new iOS 6 it stopped working and now I can't listen to music or watch videos on my iPhone unless I insert a headphone!
    What's happened and how can this be resolved?

    Experiencing similar problems with both me and my wife's iPhone 4S's. My phone's speaker was muffled until I played a song, then it seemed to work ok. My wife's will not work at all except for when you adjust sound settings (e.g. changing the alert sound). Then it works only during the "test" and reverts back to its broken state.
    P.S. And yes, I've rebooted both numerous times. This has no obvious affect.

  • After new update keypad not working properly..slow have to wait for letters to fill in. Any thoughts

    After downloading new OS key pad not functioning
    Properly. Type in message and it takes several seconds to populate.
    Anyone else having same problem or solution?

    There are many other posts here on the forum about this same issue...use the SEARCH feature and I'm sure you'll locate your answer.

  • Photoshop after Latest CC updates is not working properly.

    I just installed CC Photoshop's latest update and now I'm totally out of commision.    Unable to work with any of my previous 3d projects.  They appear to load, but as soon as you select any object, it falls apart.  Objects go flat and rearrannged.   When createing new objects, such as 3D extrusion fonts,   they are flat.  Cannot distinquich the front from the sides.  There are no shadows.    When you click an object, the background dissappears.   When you try to move an object, it stutters and takes several seconds before the object moves.     In regular Photoshop when editing a previous projectl, for example, when setting a paint brush on a given area, an error message pops up says "Could not use the brush tool because the current time is outside the range for the target layer.    "Time"???    What is going on.    Does anyone know if I can uninstall and revert back to a previous project.  I've got work to do.   This is devesating!!   The list goes on.   When trying to create a depth map from a plane object, you'll get an unknown error and cannot get out of it unless you kill it from the Task Manager.    Please help!

    I would think you would first check to see if your video card has driver updates. Check the card maker's website to be very sure. Upgrade to the most current.
    If doing that does not fix it, then try this:
    Dial back your GPU settings (Preferences > Performance) from Advanced to Basic.
    If no luck, downgrade PS, if only to get your work done.
    You can download the Photoshop CC installer direct from ProDesign Tools.
    http://prodesigntools.com/adobe-cc-direct-download-links.html
    Follow the instructions carefully or the download link won't work.
    Uninstall your 14.2 version and using the downloaded CC installer, you should have 14.0.0
    I never did this before, but under Help > Updates make sure you don't update past 14.1.2

  • Yosemite 10.10.2 Update - Trackpad Not Working Properly

    MBP OSX Yosemite 10.10.2
    The following trackpad gestures no longer working since latest update - four finger mission control, app expose, launchpad, show desktop, two finger scroll in safari (although works in chrome).
    The same symptoms on BT trackpad as on the internal trackpad.
    All basic troubleshooting tried - reboot, turned all the gestures off and reboot etc etc
    Please help

    Go step by step and test.
    1. Shut down the computer.
        Clean the trackpad with moist not wet microfiber cloth.
        System Preferences > Point & Click
        Try turning off three finger dragging and then turning it on after  testing.
    2. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
      3. Reset PRAM:   http://support.apple.com/kb/PH14222
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Close all windows and quit all applications.
        Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
        Select Disk Utility from the drop down. When the Disk utility window opens up,
        select  Macintosh HD, then First Aid.
        Click Repair Disk    Section: "Try Disk Utility" Permissions button.
        Ignore the  time remaining estimate.
        Last 1 minute may take longer.

  • Edit/update function not working properly on visual basic 2012

    help, i'm working on a update function on my aplication program using visual studio ultimate 2012 VB.
    after i fixed the error on my coding, i debug the program with f5. but, when i tried to update the data on the datagridview it doesn't change even thought the messagebox "data has been updated" show up.
    how do i fix this problem?
    here is the coding for update function:
    form1:
    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
    ClassSiswa.ubahdata(New SqlConnection, (txt_nis.Text), (txt_nisn.Text), (txt_namasiswa.Text), (cmb_kelaminsiswa.Text), (txt_kotalahir.Text), (DTP_siswa.Text), (cmb_agamasiswa.Text), (txt_beratsiswa.Text), (txt_tinggi_badan.Text))
    datagridview()
    End Sub
    Private Sub UpdateDataSiswa()
    ClassSiswa.Nis = txt_nis.Text
    ClassSiswa.Nisn = txt_nisn.Text
    ClassSiswa.Nama_Siswa = txt_namasiswa.Text
    ClassSiswa.Tanggal_Lahir = DTP_siswa.Text
    ClassSiswa.Jenis_Kelamin = cmb_kelaminsiswa.Text
    ClassSiswa.Kota_Lahir = txt_kotalahir.Text
    ClassSiswa.Agama = cmb_agamasiswa.Text
    ClassSiswa.Tinggi_Badan = txt_tinggi_badan.Text
    ClassSiswa.Berat_Badan = txt_beratsiswa.Text
    ClassSiswa.Updatesiswa(ClassSiswa.opencon, (txt_nis.Text))
    datagridview()
    End Sub
    classSiswa:
    Public Shared Sub ubahdata(ByVal _cn As SqlClient.SqlConnection, ByVal _Nis As String, ByVal _Nisn As String, ByVal _nama_siswa As String, ByVal _jenis_kelamin As String, ByVal _kota_lahir As String, ByVal _tanggal_lahir As String, ByVal _agama As String, ByVal _berat_badan As String, ByVal tinggi_badan As String)
    Dim sql As New SqlClient.SqlCommand
    sql.Connection = _cn
    sql.CommandType = CommandType.Text
    sql.CommandText = "update siswa set nis='" & Nis & "',nisn='" & Nisn & "',nama_siswa='" & Nama_Siswa & "',jenis_kelamin='" & Jenis_Kelamin & "' ,kota_lahir='" & Kota_Lahir & "',tanggal_lahir='" & Tanggal_Lahir & "'agama='" & Agama & "'berat_badan='" & Berat_Badan & "',tinggi_badan='" & tinggi_badan & "'"
    MessageBox.Show(" Data Telah Diupdate")
    ClassSiswa.closecon()
    End Sub
    Public Shared Sub Updatesiswa(ByVal _Cn As SqlClient.SqlConnection, ByVal _nis As String)
    Dim sql As SqlClient.SqlCommand
    sql = New SqlClient.SqlCommand
    sql.Connection = _Cn
    sql.CommandType = CommandType.Text
    sql.CommandText = "Update siswa Set nis = '" & Nis & "', nisn = '" & Nisn & "' where nis = '" & _nis & "'"
    sql.ExecuteNonQuery()
    End Sub

    Hello,
    A DataGridView knows nothing about the updates done as shown above, you need to update any rows that have changed yourself. For example. lets say I loaded data from a database table into a DataTable, create a BindingSource and assign that DataTable as the
    DataSource for the BindingSource. The BindingSource becomes the DataSource of the DataGridView so now when you moved up/down rows in the DataGridView you are changing position in the BindingSource and can read this data via BindingSource.Current by casting
    Current to a DataRowView then access the Row property with Field(Of T or SetField(Of T. Couple this will logic to locate rows that may not be the current row and we still can use SetField(Of T)(Col,Value) to update data in the BindingSource which is then immediately
    reflected in the DataGridView.
    The following is for MS-Access but the same logic applies for SQL-Server database via SqlClient data provider rather than
    OleDb data provider.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
    but do not reply to forum questions.

  • Master License File update - apps not working properly

    All:
    Believe it or not, I am replacing an expired license with the master license file on a 9.2 installation. Go figure...
    Anyway, I have searched for docs on what needs to be reconfigured and how after replacing the old file and have come up empty. Have run config tool to update Deployment id for both Essbase and Planning but still getting error message in Planning indicating an issue with the license and when opening HBR rules, that it cannot connect to Essbase due to licensing issue. Tried re-registering with Shared Services for both Planning and Essbase, still getting the same errors and log files are not providing much by way of clues.
    Other info: License server logs shows no errors. All apps starting successfully.
    Does anyone have a doc or experience with this that they can share with me? Do I need to deregister apps? Redeploy the app servers?
    K

    There are no virus for an iphone unless it is jailbroken.
    For the message  - close out of the app, then double tap the home button and completely close out of the app.
    Then do a reset, no data loss.  Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    this reset, might help with your other issues too.

  • RH_INSERT_INFTY in update mode not working properly

    I am calling the FM RH_INSERT_INFTY using IN UPDATE TASK in my Inbound part of my IDOC.
    The IDOC is getting generated successfully in the Outbound part but getting errorred out in the Inbound side.
    I have checked for the attributes of the FM where the type of FM is NORMAL FUNCTION MODULE.
    any pointers on this will be of immense help to me.

    This is the output of journalctl --all
    May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Activating service name='org.gnome.Terminal'
    May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Successfully activated service 'org.gnome.Terminal'
    May 12 20:55:26 egidiolaptop gnome-session[19563]: 1431456926458 addons.update-checker WARN Update manifest for {972ce4c6-7e08-4474-a285-3208198ce6fd} did not contain an updates property
    May 12 20:56:03 egidiolaptop systemd[19544]: [/home/egidio/.config/systemd/user/googledrive.service:2] Unknown lvalue 'Type' in section 'Unit'
    May 12 20:56:03 egidiolaptop systemd[19544]: Cannot add dependency job for unit network-online.target, ignoring: Unit network-online.target failed to load: No such file or directory.
    May 12 20:56:03 egidiolaptop systemd[19544]: Created slice -.slice.
    May 12 20:56:03 egidiolaptop systemd[19544]: Starting -.slice.
    May 12 20:56:03 egidiolaptop systemd[19544]: Started Google Drive mount.
    May 12 20:56:03 egidiolaptop systemd[19544]: Starting Google Drive mount...
    May 12 20:56:03 egidiolaptop fusermount[20547]: /usr/bin/fusermount: failed to unmount /home/egidio/Google Drive: Device or resource busy
    May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service: control process exited, code=exited status=1
    May 12 20:56:03 egidiolaptop systemd[19544]: Unit googledrive.service entered failed state.
    May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service failed.

  • Update/restore not working properly

    My wife and I have been trying to get her iPhone 4S to update to the latest version of iOS. The problem is that the software update server appears to be running at the approximate speed of a glacier -- I have been trying to download the update (a 1.66 GB download) for the last three hours, and every time I do it downloads at about 30 KB per second and tells me there is still 24 to 25 hours remaining. I have checked and rechecked, and there is NO possibility of a bottleneck on my end -- no interference from firewalls or antivirus software -- but in spite of this the download always crashes with an Error 9006, WHICH IT SHOULD NOT BE DOING.
    Are the servers just completely screwed tonight? Is there a solution I haven't figured out yet? I assure you, I've tried about everything that can be tried.

    I would suggest that you hook up the phone to iTunes on the computer you sync with and update that way. It is faster and requires less memory to do the update.
    Cheers,
    GB

  • Recent Blackberry update - clock not working properly, nor is Blackberry app worldH

    Dear all
    Can anyone advise please - my Curve 8520 has just received an update......however, since doing so, I am unable to set the alarm on my clock....and blackberry app world keeps crashing on me.
    Has anyone else had this.....can anyone help please....it's very frustrating.
    Many thanks in anticipation
    Wendy

    This is the first I have seen of that issue.
    So, open your Clock > Menu key > Set Alarm. When you click on Set Alarm, nothing happens... the device does not respond and no alarm options appear?
    I'd say do another reboot:  With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
    Let us know.
    What is your Operating System loaded to your device?
    Look at Options > About, third line down beginning with a "v.5.xxx"
    What is yours?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Samsung software update, email not working properly

    My Samsung software updated yesterday. Now, when I am outside my 4G network, I can no longer send or receive emails. What setting change am I overlooking? 

    Let's troubleshoot a little further fscarbrogh. The reason I asked if you are able to access the internet, is to ensure you have a data connection. A data connection is required in order for your email to sync to your device successfully. Are you using a third party app to retrieve your emails? Have you tried to remove and re-add your email account?
    Thank You,
    MichelleS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Photoshop not working properly after new installation

    I have a brand new Dell desktop that runs windows 8. I installed the Adobe Creative Suite 5.5 Master Collection and got a message saying that there were errors during installation and some things might not work properly. I uninstalled and did it a second time. Same message.
    I then spoke with an  Adobe agent that helped me download a program to detect what the errors were. He said they were minor issues and shouldn't affect the programs. No help there.
    I then spent hours today speaking with Dell on the phone and the rep took remote control of the computer and did a diagnostics check on the hardware. He said everything is fine. I asked him if it might be the video card needing an update so he ran an update. Same issues, no change.
    We changed the compatability to windows 7 and still no change.
    I then uninstalled the creative suite and tried installing it from the desktop. Still same problems.
    These are the issues in photoshop:
    1)When using certain tools (transform tool, crop tool) the images goes completely black.
    2) The background switches at random- sometimes checkered, sometimes grey, and sometimes black.
    3) Color saturation is incorrectly represented. It switches whenever it wants. For instance, when I zoom in and out it changes.
    In Adobe Bridge some of the RAW images don't show in the program. Some I just can't open. Others open fine. Those images will open in Photoshop but not in Bridge.
    So I have no idea what to do and this is becoming extremely frustrating. I should add I haven't had any problems with Lightroom and it works fine as far as I can tell.
    What could be causing these issues? Could the install CD be damaged?

    I turned off the GPU in Photoshop's preferences as you suggested and everything seems to work properly now in Photoshop. In Adobe bridge the files are also all showing now and there doesn't seem to be the same issue there either.
    I also tried enabling the GPU and changing it to Basic and it continues to work, but when it is changed to advanced when enabled the problems arise again.
    So it seems as though the problem is with the video card or its driver as you said. I am not 100% sure that the Dell rep updated the driver from AMD but I am pretty sure he did. I did go to the AMD website and ran a program to detect if the driver needs to be updated and it resulted in a message saying that the driver is up to date and current.
    As you said this is just a temporary solution and I want to make sure I have a working GPU system. What do you think the problem is then? How would you suggest I proceed? Should I contact Dell and tell them the problem seems to be with the installed video card?

  • My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that  are causing the problem.
    I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
    Kernel Extensions:
              com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
              com.rogueamoeba.InstantOn          Version: 6.0.2
              com.rogueamoeba.InstantOnCore          Version: 6.0.2
              com.Cycling74.driver.Soundflower          Version: 1.5.3
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
                 [not loaded] com.adobe.fpsaud.plist
                 [not loaded] com.adobe.SwitchBoard.plist
                 [not loaded] com.bombich.ccc.plist
                 [not loaded] com.dymo.pnpd.plist
                 [not loaded] com.intego.BackupManagerPro.daemon.plist
                 [not loaded] com.micromat.TechToolProDaemon.plist
                 [not loaded] com.microsoft.office.licensing.helper.plist
                 [not loaded] com.orbicule.witnessd.plist
                 [not loaded] com.sierrawireless.SwitchTool.plist
                 [not loaded] com.stclairsoft.AppTamerAgent.plist
                 [not loaded] org.macosforge.xquartz.privileged_startx.plist
                 [not loaded]          pcloudd.plist
    Launch Agents:
                     [loaded] com.divx.dms.agent.plist
                     [loaded] com.divx.update.agent.plist
                     [loaded] com.epson.epw.agent.plist
                     [loaded] com.lacie.raidmonitor.daemon.plist
                     [loaded] com.lacie.safemanager.daemon.plist
                     [loaded] com.micromat.TechToolProAgent.plist
                     [loaded] com.orbicule.WitnessUserAgent.plist
                     [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
                 [not loaded]          .DS_Store
                     [loaded] com.adobe.AAM.Updater-1.0.plist
                     [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                     [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                     [loaded] com.divx.agent.postinstall.plist
                     [loaded] com.google.keystone.agent.plist
                     [loaded] com.propaganda.dejavu.dvmonitor.plist
                     [loaded] com.valvesoftware.steamclean.plist
                     [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              iTunesHelper
              Synergy
              TomTomHOMERunner
              Dropbox
    3rd Party Preference Panes:
              Déjà Vu
              Flash Player
              Flip4Mac WMV
              GR-55
              Paragon NTFS for Mac ® OS X
              Perian
              Printopia
              TechTool Protection
              Witness

  • TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

    When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

    No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
    <Edited By Host>

Maybe you are looking for