Update ios5 problem

I cant load the iOS 5 update on my iPhone 3GS.
After 368MB it stop with Message "networkproblem - runtime Error .... Try it later"
I did it now many Times.
The update on my iPhone 4 went well.
What can I do?

i waited until late at night to update my 2 phones, had no issues what-so-ever. I think it is the large volume of folks trying to update, jamming the Apple servers

Similar Messages

Since i update ios5, iphone is not connected to my wifi

since i update ios5, iphone is not connecting to my wifi,

bro its connecting other wifi but not connecting my home network......i mean its connect,shows top wifi icon with proper signal but the problem is that not giving me access.....sites are not opning in safari...simply its not working... plzzz help me out ..., i think since i update ios5 its giving me this problem...

Has anyone got an answer to fix ios5 problem, no sim card inserted...

Has anyone got an answer to fix ios5 problem, no sim card inserted...

I bought a new sim card today at the t-mobile shop and they activated the card just by putting credit on, i got home put the sim in the iphone and still got the same message. I have restored and shut down I dont know how many times and updated itunes, I am wishing i had said no to updating the phone as i have no iphone to use and apple say i should go to an apple shop.

How long does it typically take to update ios5, if you have over 800 pics and 400 sings, How long does it typically take to update ios5, if you have over 800 pics and 400 sings

How long does it typically take to update ios5? Since update mine has been syncing for hours. I do have over 800 pics and 400 songs. Any ideas?

My update to iOS 5 took about 75 to 80 minutes. After the update I then had to update some aps and reload from the backup. When iOS 5 is being uploaded there should be some sort of status message in the top pert of iTunes. If this is not changing then I think you have a problem. If the status is changing, even of very slowly, then let it keep running until it's done.

My contacts are messed up after updating iOS5

After i updated to iOS5 my contacts that also updated to iOS5 only show up as their numbers instead of their contact name when i text them. How do i fix that?

I think its an iOS5 problem, cause exact same issue with my iphone after installing iOS5.

After update iOS5 on iPhone4 calendar verry slow to load.........

After update iOS5 on iPhone4 calendar verry slow to load..
When select other date or other month it not response. What's problem or bug program

Unfortunately, I also have this problem. The calendar will eventually load, but it may take 90 seconds!! This is ridiculous on an iphone 4s. Apple???

Internet connection times out when downloading update ios5. get to last 0.01 of date, says processing file and then says connection timed out. impossible. is there a fix?

Internet connection times out when downloading update ios5. get to last 0.01 of data, says processing file and then says connection timed out. Is there a fix?
I am using itunes 10.5. Update didnt work on last software but restore did work. Help

After two days of attempts, Google & Apple searches, one Apple post stated to turn off all firewalls and virus software and keep trying since there were 6 gazillion people trying to update. I have Windows 7 & Kaspersky and had to diable every single safety feature in Kaspersky as well as Firewalls and it finally allowed the download and update attempt.
Glancing at the forum, there appears to be numerous other problems with missing pictures, text problems etc after the IOS5 download but fortuneately, everything seems ok so far. Good luck, it is frustrating! Hattie47

As I update IOS5 I can't use those apps which I have already buy before.

As I update IOS5 I can't use those apps which I have already buy before.They are still here but just can't open as I try to click in the app it will jump back to the main menu.How can I solve this problem???Please help!!

Make sure the iPad fully synced back up to your computer after the installation. The apps were removed as part of installing 5.0, and should be restored back to it as you finish. Connect the iPad to your computer that you backed up to, and sync it again. If they don't come back, go to the Apps page (click on your iPad under Devices, then Apps) and click the ones you want to sync. You could also restore to the backup you made right before the update.

HAS THE IOS5 PROBLEMS BEEN SOLVED

ios5 problems been solved yet?

No, problems still exist. I have an iPhone 4 and it wont allow some app's to update and now I can't use them. There are also problems with downloading from the cloud as some items will come up with an error code. Also why did Apple force your own equipment to upload everthing to the cloud? I now have to reload around 16GB of music back to the phone and I said previously the phone let me reload all my own songs!!
Those guys who said there no problems are lucky but also out of touch, have they not heard of all the press news about this? I loved my phone but now its becoming frustating, needs sorting soon.

After updation IOS5...face using some of the apps in my iphone

After updation IOS5...face using some of the apps in my iphone...sometimes apps clsed automatically...when try to double click home button...its hanged for several minute...sometimes phone got hanged....

I'm going to answer myself this posting since I had a chat with one of the Apple support person and that person resolved my problem. Basically in iTunes I clicked on the iTunes Store and on the right side of the iTunes, it shows the "Quick Links", so I clicked there and I went to "Purchased" and I downloaded "All" my apps and that pretty much fixed my problem with the exception that, I had to manually download from my own phone some apps but once I had all my apps updated and my phone configured in the way I wanted, I performed another "sync" and no more error messages. I'm posting this in case someone else have the same problem.

Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started. How do I set FF back to open tabs in 1 window

Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started 2 days ago. How do I set FF back to open tabs in 1 window?
There is no plus sign and going into optins and changing settings has not worked. I have uninstall FF and reinstall-keeping my personalization-and that was no help.
Right clicking on FF Icon to open a new tab, or going up to FF drop down tab and clicking on new tab both do not work.
Help everything opens a new window not a new tab. there seems to be no way to reset this or to chose a different optin. I just downloaded new tabs at end addon and it didn't do a thing.

as a first troubleshooting step - does it work like normally when you open & run firefox in [[Safe Mode|safemode]] by pressing the shift key while you open firefox (all other instances have to be closed before)...

10.4.11 combo update install problem

Has anyone else had trouble installing the combo update from 10.4 to 10.4.11?? Mine almost finishes and says it encounters an unknown error and cannot finish the install. Says it moves the update to trash and says try again from the finder...
HELP!!

Updating
Certain steps appear to minimize the risk of an update producing problems.
Number one is to make sure you have a bootable clone backup of your computer in case you do need to back out of it again. This is the only guaranteed way of not having to worry about the results of an update.
Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility. You can verify a drive while booted from the same drive but sometimes this produces spurious errors. Repairing a drive (if necessary) has to be done while booted from another disk.
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
You can also go to the step of booting into safe mode to do the install.
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
Repair permissions again afterward.
It helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
The more cautious even like to unplug third party peripherals (see [comment by BDaqua|http://discussions.apple.com/message.jspa?messageID=9040746#9040746]).
Almost all of the above steps (except backup) have been questioned (e.g., [Permissons repair|http://www.macworld.com/article/52220-3/2006/08/repairpermissions.html] as to necessity. Probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe?
[BDaqua's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=8948595#8948595]
[Baby Boomer's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=9025760#9025760]
[Klaus1's post on updating and removing updates|http://discussions.apple.com/message.jspa?messageID=10257902] and [another one|http://discussions.apple.com/message.jspa?messageID=10402175]

Can't get email to go out after updating ios5. Settings look ok can receive incoming and can get to Internet Help

Can't get email to go out after updating ios5. Settings look ok can receive incoming and can get to Internet Help

Is this a POP account, or an IMAP account? Did you enable your account type in Gmail?
You can verify whether or not you did (and enable it if you didn't) by logging into Gmail on the web. Then, open the 'Forwarding and POP/IMAP' tab on your 'Settings' page, and configure IMAP. After enabling IMAP in Gmail, make sure you click 'Save Changes' so Gmail can communicate with your mail client.

SQL Server 2005 Update mechanism problem

Hi Gurus,
      We're faced with one SQL Server 2005 update mechanism problem. Here is my problem:
      According to our requirement, an add_on interface program is designed to execute creation of production order by calling Bapi.
      There are 3 steps in this add_on program:
      Step 1: Create production order
      Step 2: Change the information of production.
      Step 3: Some other
      After the step 1 has finished immediately step 2 is called, Howerver the information which should have inserted into database table couldn't be found from database. (Maybe because the time between two steps is too short to finish inserting)
      In order to ensure the complete of the transaction, before the step 2 executed, the information in step 1 should have inserted into database.
       Is there any solution to solve this problem?
       I guess whether there is any parameter which control the time of writing buffer into database...
Any advice is appreciated.
Thanks & Best Regards,
Derek Yang

Hi
I have the same problem, but that post didnt help me
This is the error I have:
My snapshot agent hangs.. waiting for a response from the server.. and timeouts.
This only hapens for a publication that has a filter based on HOSTNAME()
The other publications work fine
Error messages:
Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Command Text: sp_MSsetup_partition_groups
Parameters: @publication = XXXXXXX
Stack: at Microsoft.SqlServer.Replication.AgentCore.ReMapSqlException(SqlException e, SqlCommand command)
at Microsoft.SqlServer.Replication.AgentCore.AgentExecuteNonQuery(SqlCommand command, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteDiscardResults(CommandSetupDelegate commandSetupDelegate, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.SetupPartitionGroups()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoRegularMergeSnapshotPreparations()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoPreArticleFilesGenerationProcessing()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: MSSQLServer, Error number: -2)
Get help: http://help/-2
Server XXXXXXXXX, Level 11, State 0, Procedure , Line 0
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Source: MSSQLServer, Error number: -2)
Get help: http://help/-2

Update/Insert Problem with Oracle Warehouse Builder

Hello,
i have update/insert problem with owb.
Situation: I have a source-table called s_account and a target table called w_account_d. In the target table are already data which was filled trough the source table inserts. Now anyone make changes on data on the target table. This changes should now give further on the source table with an update operation. But exactly here is the problem i can´t map back the data to source because that will create a loop.
My idea was to set a trigger but i can´t find this component in owb or is anywhere hidden?
Also i have already seen properties as CDC or conditonal loading in the property inspector of the table, but i have no idea how it works.
Give it other possibilities to modeling this case? or can anyone me explain how i can implement this eventually with CDC?
I look forward for your replies :)

Hi
thanks for your answer. I follow your suggestion and have set the constraints of both tables into the database directly.Nevertheless it doesn´t work to begin. In the next step i found by right click on a table the listpoint "configure" - I goes to "unique key" --> creation method and set here follow options: Constraint State = ENABLE, Constraint Validation = Validate. That error message that appears before by the deployment disappears yet. Now i start the job to test if the insert/update process works right. Finally it seems to work - but not really.
My Testscenario
1. Load the data from source table about the staging area to data warehouse table: Check - it works!
2. Change one data record in source table
3. Load the source table with changed data record once again to staging area: Check - it works!
4. Load new staging area table with the changed data record to data warehouse table: Check it works! BUT, BUT i can not recognize if it is insert or update operation, then under the design window by jobs execution windows is reported "rows selected 98", Rows inserted" is empty and "rows updated" is empty. So i think works not correct, then my opinion if it works correct it should show be "rows updated" 1.
What can yet now still be wrong or forgotten? Any ideas?
*By the way think not 98 rows there is not important if you make an update or insert which performance. It is an example table the right tables have million of records.*
I look forward for your answers :)

Update ios5 problem

Similar Messages

Maybe you are looking for