Update iPhone 5 to Ver. 7.0.3
Update My iphone iOS version 7.0.2 to 7.0.3 and stood a red balloon notification settings icon.
Might I mention that do to remove this notification.
thanks
if you swipe upwards from button of the screen you should get look image in link
http://www.gizchina.com/wp-content/uploads/images/ios-7-control-center.jpg
most left icon that looks like a torch click it!
Similar Messages
-
ITunes 9.2.1 refuses to update iPhone 3GS software ver. 4.1
Does anyone have a workaround for this problem, where iTunes tells me
there is a newer version of iPhone software, 4.2, and that I still have
only ver. 4.1. But when I click the Update key, the response is that
my iTunes 9.2.1 software is up-to-date, but it won't update the IPHONE software?
(In the iTunes SUMMARY tab for my iPhone 3GS, it says that my iPhone software is v. 4.1, and then next to the Update key it says that a newer version of iPhone software, 4.2, is available. Problem is, when I click on the Update key, the response is that my iTunes software (not iPhone software), is ver. 9.2.1 and is "up to date." No mention of how I can update my iPhone 4.1 to version 4.2. I see no work-around in the iPhone Help functions.)
BTW, re-clicking the Update key has the same result as Einstein predicted. Same result: no iPhone software update. This is the first time I have tried to update the iPhone software, since I only recently purchased the 3GS.
Any advice would be much appreciated!Requirements to install iOS 4.2.1, this is from http://support.apple.com/kb/DL1061
System Requirements
* Mac or PC computer with USB 2.0 port
* iTunes 10.1 or later
Requirements for iTunes 10.1 on a Mac (this is from http://www.apple.com/itunes/download/ )
Macintosh Hardware
* Mac computer with an Intel, PowerPC G5 or G4 processor
* Intel, PowerPC G5 or 1.0GHz PowerPC G4 or faster processor is required to play Standard Definition video from the iTunes Store
* 2.0GHz Intel Core 2 Duo or faster processor is required to play HD video, an iTunes LP, or iTunes Extras from the iTunes Store
* 512MB of RAM; 1GB is required to play HD video, an iTunes LP, or iTunes Extras
* Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
* Playing videos also requires at least 16MB of video RAM
* Broadband Internet connection to use the iTunes Store
* Apple combo drive or SuperDrive to create audio, MP3, or back-up CDs; some non-Apple CD-RW recorders may also work.
* Apple SuperDrive to back up your library to DVDs; some non-Apple DVD-RW drives may also work.
Macintosh Software
* Mac OS X version 10.5 or later
* QuickTime 7.6 or later
* Support for HE-AAC requires QuickTime 7.6.4 or later
* Safari 4.0.3 or later
* 200MB of available disk space -
Updated iPhone Software to vers 2.0. Now "Sent" messages & folder are gone
*Just downloaded (40 mins) & installed iPhone Software version 2.0.*
Contacts/Phone/Bookmarks/Music Library/Picts are all OK. _PROBLEM IS I've lost all my Sent Email messages and Sent Folder for each mail account and no longer have access to any messages sent from my iPhone_. It's ironic because during iPhone 2.0 update, there was a message about backing up mail/contacts/picts et al. After update & firmware update, iTunes restored info to my iPhone, but all sent messages are gone. Everything else appears to be OK.
*Does anyone have any idea how i can retrieve them.* (Seems if they were backed up to iTunes, that it should be possible to restore the same information).
[I turned off "Push" by navigating on the iPhone:SETTINGS>FETCH NEW DATA>PUSH- "off". Since turning PUSH off, new sent messages (i.e. after 2.0 upgrade) appear in sent folder, but older sent messages are still missing in action.
Your thoughts & comments are greatly appreciated!
GeoffThis may be odd... responding to my own posting, but for anyone with similar issue, I just spoke with the people at "1-800-myiphone".
Result: "Sent Messages, and Sent Message Folder are both temporary, and are not part of itunes/iphone syncing or backup features".
To restore the prior Sent Messages that existed in the earlier iphone software version 1.14 is impossible as messages are not stored on AT&T's servers, and iTunes does not sync "sent messages." The only work-around to re-populate missing sent messages is for the recipients of those messages to forward messages back from their computer, not their iphones, (Remember iPhone strips attachments from forwarded messages, therefore recipients who have iphones must 'forward back message from their computer only).
After migrating to iphone software version 2.0, it is a really good idea to do a "Bcc:" (Blind Carbon Copy) to onself on all future messages. That way messages will arrive in your 'inbox' which can be synced and restored via iTunes software.
In short, I think Apple is using a technical glitch in it's software update to coerce users to use the "MobileMe" service that Pushes and syncs messages to an iPhone and the user's other computers.
Hope this posting is helpful to others.
Sincerely,
Geoff -
I Have updated IPad to IOS 7.1.1, and also updated Adobe Reader to ver. 11.3.1. When I click on the Adobe icon, I get no files or folders to come up, just a blank screen. I know from my usage indicator on the IPad that I have 36 GB of PDF files resident, which I expected, but how do I access them. I had updated from IOS 5 because Adobe was crashing so often that it made it difficult to work.
If restarting the app or your iPad/iPhone does not work, we are not aware of any other ways to fix this particular problem. Uninstalling & reinstalling Adobe Reader may be the only option left. It will clean up the "inconsistent" application data. But it is not even guaranteed to fix the problem.
If you uninstall Adobe Reader (or any other iOS apps), iOS will erase all of the application data including settings/preferences and PDF documents stored locally on your iPad/iPhone.
We'd highly recommend backing up your PDF documents regularly (not just this time) so that you do not lose them when something goes wrong.
How to backup and restore PDF documents on your iPad/iPhone using iTunes
Backup your PDF documents.
Uninstall Adobe Reader.
Download and reinstall Adobe Reader from the App Store.
Alternatively, you can store your PDF documents in cloud storage (e.g. Acrobat.com, Dropbox, Google Drive), which will eliminate the need to backup local files.
Please let us know if you need further assistance. -
Kein Netz mehr seid den neusten Update Iphone 4s
Hallo werte Apple User,
ich habe seid den neusten Update von Apple 8.1.2 mit mein Iphone 4s kein Netz mehr.
Die Frau von Base meinte,dass das Ipohne 4s mit den neusten Update komplett überfordert sei und ich könnte nichts machen außer warten,
bis ein neues Update rauskommt! Stimmt das ?
Ich habe mein Iphone auf Werkeinstellung zurück gesetzt.
Ich hab echt alles andere auch versucht,alles ohne Erfolg.
Ich bitte euch mir zu helfen.
Euch allen ein schönes Wochenende.
LG Paul CzilwaSchon probiert das Betriebssystem neu aufzusetzen? Dieser Artikel beschreibt den Vorgang:
http://support.apple.com/kb/HT4137?viewlocale=de_DE
Wurde am iPhone die Firmware verändert? -
I now have a useless $700 phone. Updated iTunes to latest version (and can't get it to revert back to an earlier version), updated iPhone (iPhone5) to iOS 7 and now it won't talk to iTunes, nor will it connect to my WiFi. What should I try now?
If it won't talk at all to iTunes, you can hold down the power and home button for 10 seconds, it will power off, this is ok, then let go of the power button while holding the home button until iTunes sees it as a device in recovery mode. You can try to reinstall iOS7 and then restore.
-
I am wanting to update iphone to 4.3.3 software. however itunes is telling me it is unable to connect to update server as i am not connect to the internet. yet i clearly am connected... Please help
Looks like I've asked a really old/common question - toonz posted the answer - I've copied it below. Thanks toonz, everything now ok.
Correct AnswerRe: Updating to 1.1.3 02-Feb-2008 23:19 (in response to alibeau)
You can fix this by following the steps in this article:
http://docs.info.apple.com/article.html?artnum=304468
Liked (1) -
While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour. -
I am getting an 1015 error while updating Iphone 3G with latest iTunes pls help me to restore iPhone 3G
Try this and see if this helps http://support.apple.com/kb/TS3694#error1015
-
Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.
Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem! -
I downloaded the new IOS7 on my iphone. I can no longer sync up with itunes. How do I update itunes to sync up with my updated iphone?
If you go to iTunes on your computer click on the App Store and scroll all the way down . In the bottom right of the screen is a map logo. Click on that and then chose the flag for the country you want
-
After updating iphone 4s to 6.1 version my battery percentage stood at 1 percent. Does anyone has same problem? Or its update bug?
THIS is "quite a few": https://discussions.apple.com/thread/3391947
As are these:
https://discussions.apple.com/thread/3391947?tstart=0
https://discussions.apple.com/thread/3484755?tstart=0
https://discussions.apple.com/thread/3481668?tstart=0
https://discussions.apple.com/thread/3518760?tstart=0
https://discussions.apple.com/thread/2755090?tstart=0
https://discussions.apple.com/thread/3507356?tstart=30
https://discussions.apple.com/thread/3482083?tstart=60
https://discussions.apple.com/thread/3492588?tstart=60
https://discussions.apple.com/thread/3397244?tstart=90
And older ones:
Battery Meter/Life Problems with 4.0.2
4.0.2 guzzling my battery. Your's too?
4.0.1 battery life
Battery runs out very quicky in iOS 4.0.1
Battery nearly nonexistant after 4.0 upgrade
Dead battery after few hours on standby using 4.0 software
3.1.3 battery problem
OS 3.1.3 battery issues
3.1.3 upgrade - shortened battery life?
Battery life cut after 3.1.3 update on iPhone 3G
3.1.3 Firmware is a battery killer - how do I back out this upgrade?
Poor battery life with iPhone 3G running 3.1.2
3.1.2 EXTREME battery drain - what gives?
3.1 Battery nightmare
iPhone 3GS with fw 3.1 – battery life gets even worse
Battery Issues with 3.0.1
BATTERY drain with 3.0
upgrade to 3.0 drains my battery
Battery Drain after Update 2.2.1
Battery Life Radically Decreased after 2.2.1 Firmware Update
As you can see, battery issues have been common since the first iphone, frequently reported after an upgrade, but not always. So to blame a specific version doesn't describe the problem sufficiently to find a resolution. -
I was doing OS5 help update iphone but now no longer connects to PC and iTunesdoes not see the phone
Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.
-
What to do?? - I just updated my iTunes to ver 11.2.1 because of the annoying messages they keep sending out.
Now I can't play the movies and TV series I've purchased and were watchable before.
Comes up with "This movie can be played only on displays that support HDCP (High-bandwidth Digital Content Protection)."
The cheek of the matter is everytime I tried to get Apple support it comes up with a request for me to pay $54 for their support package, to fix a problem I didn't have until I complied to one of their update requests.
End of Rant!!! - Anyone know how to fix please?Well, I wonder about all the responses...:)
Anyhow, I wound up "fixing" the problem by using the System Restore disks for the Mini. It's now running Tiger 10.4.11 (with all updates) and I copied my iTunes library over. It all works now. <shrug> I have no idea what the problem was, and I'm a bit leery of upgrading it to Leopard, so I think I'll just leave well enough alone.
Richard -
Just updated iPhone 5 to iOS 7.1.2, now it won't sync with iphoto 9.4.3
Just updated iPhone 5 to iOS 7.1.2 (from some version of iOS 6), now it won't sync with iPhoto 9.4.3 on my MacBook pro (running OS 10.8.5). I plug it in and iPhoto recognizes the iPhone but only displays a 'Loading..." message next to the 'New Photos' page.
Tried it also on my older Mac Pro running Snow Leopard 10.6.8 and iPhoto 9.2.3 and same problem.
Any ideas? Already tried rebooting both devices.I have same problem but with iPhoto 9.5.1
Photos don't get to the iPhone.
Maybe you are looking for
-
How can i sync my iphone with itunes without erasing its data?
my computer crashed and i had to reinstall my windows,now i want to sync my iphone with the new itunes(with the same apple id) but it says all data should be erased from the device....is there some way to sync the iphone without the data being erased
-
When will the ipad email be able to use the contacts group to send out mail?
This seems like a rather strait forward question but I dont know why Apple hasnt fixed the issue. For now the only solution is to download a third party app? That is redundant to keep up with two contact list (one for mail and the other for contacts)
-
hi all, please any one correct my procedure. 1 create or replace procedure new_proc() 2 is 3 begin 4 For i in 1..5 loop 5 insert into B values(i); 6 savepoint inthe_btable; 7 end loop; 8 rollback to savepoint inthe_btable; 9 commit; 10* end; SQL> / W
-
Third party tool for autocad, microstation,etc
Hi folks, We are implementing SAP in our company, which is into construction industry. We want to know which are the third party softwares which you folks use to integrating the following softwares with SAP. 1. AutoCad 2. Microstation 3. MS Project 4
-
Hi all, I'm not sure when this happened, but I just noticed that the Tone Curve no longer has sliders to adjust Darks, Lights, Shadows, etc. All I have is the curve itself and the dropdown to adjust the type of curve. Did I accidentally change a se