Update ipod 1g software version 1.1.5

is it possible to update ipod 1g software version 1.1.5 to newer one?
When I click "check for update" it's says "Your Ipod is up to date" & that was the current version!

Here is the link that Neil forgott to add.  It happens some time.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

Similar Messages

  • Updating iPod Touch Software Version and Apps saved game data

    When I transfer my apps from iPod touch to iTunes will it also moved the saved game data like in Zombie Cafe, Amateur  Surgeon 2 so on and so fort? Because I want to update my software version...

    No.  Transferring the app to the computer only transfers the app itself. not app data.  App dat is stored in the iPod backup that iTunes makes as the first step of the a sync and of an update.  Therefore, I would do one last sync of the iPod before restoring and ensure that the backup gets made.  You can check by going to the Devices tab in iTunes' Preferences and looking at the date of the backup.  Also, make sure your apps are in your iTunes library since the apps themselves are not in the backup but are synced to the iPod at the end of the update.

  • I was halfway thru updating ipod touch software, got error 1602

    I was halfway thru updating ipod touch software, i walked away from computer and when i came back there was an error "1602" and a picture on my ipod (requesting to connect to itunes?) but WILL NOT WORK AT ALL!
    What's going on?  Seems like a lot of people are having similar problems all at the same time.

    From the article cited at the end of my post:
    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
    http://support.apple.com/kb/TS1275

  • IPOD Nano - software version 1.0.4 - questions

    How do I transfer songs from my old Ipod with software version 1.0.4?
    how can I purchase songs from Itunes for my Ipod on this version 1.0.4?

    1. Use the Transfer Purchases function in iTunes.
    2. Purchase them normally.
    (79485)

  • Is there any way to return to previous iPod touch software version?

    Is there any way to return to previous iPod touch software version?

    Downgrading the iOS on any iDevice is not supported by Apple..

  • Anyone else not able to update your iPod's software version

    my ipod touch software is 4.2.1, the 3rd gen and i want update to the new version, 4.3. but it says my ipod is the current version. anyone else have this problem?

    Most sofware can only go so far with Backwards compatability. OSX Mountain Lion will not run on Power PC macs for example although they work perfectly fine on what they are using.
    Windows Vista is not backwards compatible with the machine you run XP on due to Hardware limitations
    The Same is true of iPods and iPads. I cannot use the new features of IOS 6 on my iPad 1st genersation.
    The limitation is hardware if these updates were given to older devices they would either not run or be very slow.
    This I am afraid is normal no matter who the Software manufacturer is.
    What you have to ask yourself is Does my current Hardware and software do what I need or do I need the fancy new stuff that was not around when I made my original purchase. If so then yes you will need to buy a newer version.
    If not stay as you always have been and enjoy your device as you thought you would when you bought it.

  • What are new features on updating 5g ipod with software version 1.2

    i hav noticed that on updating ipod video 5g with ipod update 1.2,i noticed only one change i.e brightness control.
    search function is not there,and
    somebody please tell what is gapless playback, i dont know how it works??!!
    i,m unable to tranfer manually songs to ipod,(by drog n drop).i hav to copy to itunes lib then on to music folder of ipod
    does the 5g video ipod really supports 640x480 video on
    update

    With 1.2 5th generation iPods get:
    - Gapless Playback
    - Game Support
    - Movie Support
    - Brightness Control
    - 640x480 Resolution
    - Quick Scroll (the letters you are scrolling through appear when scrolling fast)
    Gapless playback allows songs to flow seamlessly together without a gap - Pink Floyd The Wall, The Beatles' Abbey Road, etc. To me, it's the most significant iPod feature since the click wheel.
    For manual sync, be sure that option is selected in the iPod preferences.

  • Upgrading Fifth generation iPod to software version 1.2.1

    the latest software version for the fifth-gen iPod has been out for a while now, but i havent been able to upgade it because itunes keeps on telling me that "the iPod cannot be updated because it contains files that are in use by another application." can someone tell me why it wont update and what other application is causing it not to update so i can update my iPod. thank you if you can.
    Dell Dimension 4100   Windows XP   OS was originally Windows ME; iPod version is currently 1.2;

    I had that same problem and more; almost sent my ipod back. I also experienced charging problems, freezing, Compatibility problems too many to name. After trying almost everything I did a full install of the new software not the upgrade (that's what messed-up my ipod in the first place)leave the old software on the PC and just download the full "New" version. When you plug the ipod afterwards it should recognize it as an upgrade...don't ask me how that's what did it for me. It also gave me the option to restore the ipod which i did, then it copied all my songs back to my fifth-gen 60g. ipod. Hope this helps. Happy New Year! God Bless!
    Dimension E510   Windows XP Pro  

  • IPod Touch Software version 4.1 (8B117)

    Just downloaded this version via Itunes yesterday. Problem is that when the device is connected to my audio receiver and I hit play, the song will play for less than a minute or so then I won't be able to get the song play anything else without turning off the receiver and starting over again. Not only that, but when the TV is turned on for the display of the contents of the Touch, when the song kicks out and you turn everything off, the display won't come back. You have to fiddle around and power everything down, unplug, disconnect the Touch etc etc. before it will start over again then quit again, seconds into the song. I listened to music through the ITouch on its own and there is no problem with stoppage there - so far it's just when playing through my receiver. There were never any problems before so I'm blaming the software update. I also tried powering the Touch down and re-trying but this didn't help. Anyone else have a similar glitch? By the way, I plugged an old IPOD Mini into my reciever, still has an older software version on it, and it plays just fine, everything (including TV display) is perfect. Is there a way of reverting to previous versions of I Touch software?

    Same (somewhat) problems for me too. I have a Samsung shelf stereo that has the "Made for ipod" symbol on the box. When I put the ipod in the cradle I have no audio through the receiver. As well, the monitor I have connected does not display the contents of it. It just displays "Connecting to IPOD", then goes blank and repeats. This is my first ipod, so I have no idea if one with an older version works or not. The owner's manual for my stereo does state however, that compatability does depend on the software version of the ipod...
    shrug.

  • Itunes wont update ipod touch software 3.1.3

    I have a 2nd generation iPod Touch running software version 2.1.2.
    I want to buy the new 3.1.3 software via iTunes. When I connect the iPod Touch to my PC and click on the device name in iTunes, I'm given option of updating to version 3.1.3. But when I click "Update" I get an alert window repeating the fact that new software is available, and asking if I want more information from the iTunes Store. When I then click "Learn More" (which is the only option other than "Cancel"), iTunes simply reloads the same status screen.
    I've also tried to buy the software update by accessing the iTunes Store via iTunes, but there is no apparent link to do so.
    I've also found Apple's link on the web(http://www.apple.com/ipodtouch/softwareupdate.html) to buy version 3.0, but clicking the link simply switches me to my iTunes application, and i repeat the same loop from above.
    Any help on this would be appreciated.

    Well, if your iPod Touch is newer that a first generation device, they you can get iOS 4.2.1. If you have a first generation device, OS v3.1.3 is the newest you can get.
    Also, as best as I can remember, iPod Touch os 3.2 was never released. the iPad shipped with OS v3.2 but the iPod Touch went from 3.1.3 to iOS 4.0 (or maybe it was 4.01)

  • Error trying to update iPhone to software version 1.0.2

    I have just recently purchased an iPhone. I have no problem syncing it with iTunes. The only problem I have is every time I try to update the software version of my iPhone, it downloads the entire thing then an error message pops up as shown:
    *"There was a problem downloading the iPhone software for the iPhone "name". An unknown error occured (-48).*
    *Make sure your network settings are correct and your network connection is active, or try again later."*
    I have received this error several times and no matter what I do, I can't get it to work. The phone is not hacked, I just purchased it 2 days ago. Its BRAND NEW. I even tried erasing all setting and info, and a restore. Still, nothing.
    What am I doing wrong here? Is there something I need to do in the network settings of my iPhone? Or my cpu? I don't understand the error as I am connected to the internet.
    Please, someone help me!
    Thank you.

    Thank you for your help. I did try to do a full restore, but had to pause the download. When I came back and resumed it, the download just kept going past the 92MB file. It went all the way up to 200MB of 92MB...I have no idea what is going on with that. So I just stopped it and deleted it.
    But it takes almost an hour to download it from my connection and I didn't want to try it again. Maybe I will have to.
    Any other suggestions?

  • Updating ipod classic software

    well i have an 'older' ipod classic. is there anyway for me to get the new software? the software were the albums scroll along the side of the main menu of the ipod. updating the software thru itunes does not work.

    You can't update one iPod with software designed for another. If you have an older iPod (such as the 5th Generation model) you can't update it to have the "split screen" effect that you get with the Classic.

  • 80Gb Ipod new software version

    I have an 80 Gb Video iPod that I bought several months ago. My friend just bought a new one this past week. Hers is slightly different (thinner form factor), but the big difference is the new software version. It's much nicer. However, my iPod does not show any upgrades for software.
    Is the new interface not going to be backwards compatible with the old hardware or is there another way to get it?
    Thanks

    Is the new interface not going to be backwards compatible with the old hardware
    Unlikely.
    is there another way to get it?
    No.

  • Updating Nokia 5800 Software version

    I am having difficulty in updating the software version of my Nokia 5800 Express music. I want to install map installer and heard that my software version has to be updated. I tried *#0000# but it asks me of the server profile. Yesterday i tried through the nokia ovi suit but it could not finish. the versio around 51.... was the one i was downloading. My current version is V21.2.025. Please help me, or even tell me how i can get the previous versions of Nokia Map installer other than v3

    Is there anyone who can help me on this one pliz, Thank you in advance

  • Just got an ipod touch software version 2.2.1 and everytime I download an app get error message requires newer version of software.  Did all updates, and same.

    Keep getting error message require newer version of iPod software to install apps on ipod touch v2.2.1.  Is there a version limitation for using apps with the iPod touch?  Loaded the latest updates etc.

    I sounds like yu have a first generation (1G) iPod.  You can update that as far as iOS 3.1.3.  To get that update go here. You may have to use a different browser to get the sublink to work correctly.
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    Identify your iPod here:
    Identifying iPod models

Maybe you are looking for

  • I can't send sms to people not in the address book!

    Hi, I've just bought an iPhone 5s and noticed today that I can't send sms (or imessage) to people that isn't in my address book! If I put the contact in the address book there's no longer a problem, and if I take it away again - it's a problem again.

  • Difference between standard report S_ALR_87011963 and the custom report

    Hi Friends, My client requires a report which displays the acquisition and depreciation values of assets. Actually the requirement is to display all the values except planned depreciation. Therefore we are taking the values only from the table ANLP.

  • Need help in clearing an invalid value entered in an inputLOV popup.

    Hi I am using the JDeveloper Studio Edition Version 11.1.1.1.0 Our application uses the Springs Framework with ADF. We used an af:inputListOfValues component coupled with a disabled af:inputText component to make it like a name-value pair. As soon as

  • Need help on JSP pages!!!!!

    Hi, I have a column named "status" in a table stored in a database. this column hold an int value, either 0 or 1 0 means the staff is in an "inactive" status where 1 is just the contrast. I have the following statements in theJSP page, the <c:out val

  • 2960G and ISE 1.2

    One of my clients would like to roll out wired ISE so that if someone with a device that is part of the domain plugs into the network and the user enters proper AD credentials, they get full access.  Otherwise, the device does not get any access to t