Update is damaged

i can't update my flash player because it says  " Install Adobe flash player" is damaged and can't be opened. You should eject the disk image.

If you're on Yosemite, you might need to choose Control Panel > Security > Allow apps downloaded from Mac App Store and Identified Developers. 
If that doesn't help, please use the offline installer:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

Similar Messages

  • ICloud version provided by Apple updater is damaged or just won't install. Is the version I have properly working and syncing with all my devices?

    iCloud version provided by Apple updater is damaged or just won't install. Is the version I have properly working and syncing with all my devices?
    J.Verano

    Try quitting Pages on the iPad, restart the iPad -  and then see if the app works OK.
    To quit Pages - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Updating iTunes damaged my library file

    I left iTunes to update, and after restarting my computer, I got a message that popped up saying that the library file had been damaged.
    The only advice I got came from this article:
    http://support.apple.com/kb/TS1967
    ...which says to revert back to an older backed up library. Unfortunately, the latest library I have comes from November of last year. If someone knows how I can restore a more recent version of my library from say... last week, please say.
    If I can't do that, I'd rather just have iTunes scan and add my music over again, losing whatever song ratings/playlists I have. (I'm not sure how to do that either, thank you.)
    I still have all of the damaged files in my recycle bin, as well as an iPod which is synced with the ideal library, if there is a way to make use of those.

    Thanks, but recreating the library from the xml file didn't really do it either. I looked into CopyTrans, but I'm not sure I want to pay 20$ for something I'll only end up using once. I might just delete the entire library and then start re-adding everything, assuming I'll be able to access my purchases again.
    I thought that iTunes had an option that scans and adds all of the music on your computer automatically. Does that exist or do I need to add my albums one by one?
    Also, can someone tell me how to authorize the library to have access to my purchases so that I don't have to rebuy them?

  • IPhoto 9.1 Update has damaged code signature

    I just reloaded the 9.1 update for iPhoto, and it still has a damaged code signature (sealed code resource is missing).
    This will continue to create warnings, when the Firewall is turned on.

    As the original poster of this question, I want to note that my problem remains the same. As a very old hand at working with Macs I can point out that of course I tried the installation in Safe Mode for both the OS and my Admin account. NO CHANGE. It's a bad installer.
    All my experience with this unique problem tells me it is an APPLE error that requires APPLE attention.
    I am deeply troubled to see people replying to this issue having to jump through flaming hoops of annoying nonsense in order to get the update to work. How incredibly MICROSOFT. *SHUDDER*
    Wake up Apple!
    Taking a cue from the Microsoft PITA nature of this updater, I'm going to pull the usual routine one is forced to do on a screwy Microsoft installation and delete the whole show and start from scratch. If this PITA procedure works, I will provide another post.
    I will also be calling Apple directly, bashing my way up to 3rd level experts, to have them sort this out. If they have a solution, I will post.
    If all fails, I'll let the issue remain open and unanswered.
    Apple: I am NOT amused. Fix your uniquely lousy iPhoto v9.1 installer!

  • Cannot download newest version of iTunes, Updater has damaged iTunes install

    I ran iTunes a few days ago and it told me there was a new version.  So, I started to download it via the Apple updater software.  Well, it failed.  And failed.  I then went to the iTuens website to just manually grab the installer.  And it says it's trying, but I never get the notice that the file is downloading.  And now, iTunes will not start.  I think I have an old installer somewhere, but it will do this again the moment I start iTunes.  Is this a know issue currently?  Is there a fix for now, or do we just have to wait?

    It is known here on the forums, but there is no official "fix". However there is an effective user tip by tt2 that will help you here: Troubleshooting issues with iTunes for Windows updates

  • After update hella damaged

    wel it is not completely broken, it just trows up a bunch of warnings...
    (i have reinstalled twisted, twistedweb2 and hellanzb but it doesnt fix it)
    when opening:
    /usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:4: DeprecationWarning: the md5 module is deprecated; use hashlib instead
    import itertools, md5
    /usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
    import sha
    /usr/lib/python2.6/site-packages/Hellanzb/Util.py:33: DeprecationWarning: BaseException.message has been deprecated as of Python 2.6
    self.message = message

    Those are just warnings that this won't work when python3.0 comes out.  Until upstream (or someone else) releases a fix, there is not much that can be done about it.  Do a google search and if you find one then post it to the bug tracker.

  • Photoshop CC 2014 won't open after update ..... heeeeelp !!!!!!!!!

    Hi Guys hope someone can help on this one
    Just updated 2014 (Mac running 10.9.2) and now CC 2014 wont open ..... error message "Could not complete your request the PNG file could not be parsed.
    I have not tried opening any files at all ?
    I have dumped the prefs file ....... any ideas guys
    As always thanks in advance

    Sometimes an update will damage an install.
    Uninstall (remove preferences) Uninstaller found in CC 2014 folder.
    Use the CC Cleaner Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Reinstall.
    Gene

  • Error codes 3014, 14, 11 while updating to iOS 5

    Ok, I realize that the apple servers are down for updating to iOS 5.  My problem is the fact that I cant even restore my iphone without getting at least 1 error code.  The error codes are  3014,14 and 11.  I have googled all 3 of these to find any type of solution and Im coming up empty.  Another annoying aspect is that after I receive the error codes, I will get the "connect to itunes" message on my phone and when iTunes detects my phone, it says that its in recovery mode and needs to be restored before being used with iTunes.  I have tried to restore it at least 20+ times but I keep getting the same error messages and codes over and over and over again.
    So am I supposed to just sit tight and wait for apple's servers to come back online or has this update severely damaged my iphone???

    Well after trying for 9 straight hours, I was finally able to get iOS 5 to work and update.  In all honesty, the only thing I did differently was restart my computer.  Now, I dont know if that is THE fix for all of these problems but after 9 hours, I was willing to try anything. 
    Once I restarted my computer, i started iTunes, plugged in my phone, got the usual error message that my phone needed to be restored.  After that, it was smooth sailing from there.  I just let iTunes and my iPhone do its thing and it restored and updated like nothing had happened.  It even saved 99.9% of all of the stuff I had on my phone prior to the update.  The .01% are safari bookmarks which werent a big deal.  But all of my photos, contacts, app settings and evertything else was there. 
    Hope this works for you!  Good luck.

  • Yoga 2 Pro Went DEAD After BIOS Update

    Had a horrible experience .. with good ending ... when upgrading Bios for my Yoga 2 Pro. So I'd like to share with others. I bought my Yoga 2 Pro last June (Man 3/22/14) and love it! But, it had problem restarting automatically after Windows Update. At least 3 times (That I can recall. Did not use it briefly from June 30 - July 22), the screen reminding user not to shutdown after Windows the update would stay on until I manually powered it down and restarted it. Last July 23, it did again after Windows Update. Searched Lenovo web-site and found a Bios Update for Yoga 2 Pro (Win 8.1 64-bit). Downloaded the new Bios (dated July 11, 2014) and went through the instruction striclty. First of, the screen responses were not at all as detailed in the instruction. So, the instruction is not very good.  Received 2 warnings: Make sure the laptop is connected to the charger during the procedure, and the bios is for Yoga 2 Pro ONLY do not install it on any other models. As part fo the procedure, the laptop switched to a Bios Utility program. Again received the aforementioned warnings. Update progress was shown on the screen. All of a sudden, then screen went blank and the keyboard stayed lit. Waited for about 30 minutes. Still the same. Press and held the power button down (not sure for how long)  ... nothing!   Just no response from the latop.  Called Tech support. She (the tech support lady) said that ... it is not recommended for user to go through the BIOS upgrade! What?  Then why post it on Lenovo.com? She also said that I should not have downloaded software from the internet and upgrade, especially for BIOS. Well, I told her that I did not download the program from ANY web-site, I downloaded it from LENOVO.com. She said further that looks like the BIOS update had damaged my mother-board, there is a problem with Win 8 & 8.1, and because it was my own doing ... the damage would not be covered by the warranty!  Considering the circumstance, Lenovo would waiver the initial $99 fee to assess the damage, but I would have to pay for any repair costs. In any case, I was so fumed at Lenove Tech Support responses that I hung up. close my laptop and put it aside. Almost 24 hours later, when the battery drained completely, I connected the laptop to the charger, press the power button to turn it on ... and ... to my surprise, the laptop booted and everything came back normal! The last (7/25) auto restart seemed to go well. Not sure if the auto restart problem is fixed with the new BIOS, but it seems to be. Time will tell.

    Thank you for your posting.  I searched the net when I ran into the problem, but could not find any help.  Obviously, my search was not exhaustive. I was trying to make the following:    a.  Lenov should be more specific in their BIOS update instruction.  Their instruction was ... far ... far from reality.      b.  Lenovo tech assistance was ... not much help.  After listening to the description of my prolem, the tech lady immediately said that the operation must have damaged the mother-board, and that the operation is not ... recommended.  No guidance on draining the battery a or how to restart the machine, etc...  What I received was confusing that caused more panic!   As a note, I had done BIOS upgrade on DELL PC/laptop before w/o any problem.  I fully understand the implication of a BIOS upgrade, but trusted that manufacturer fully tested whatever that they post in their web-site.  Oh well, live ... and learn!  All in all, the Yoga 2 Pro is a great machine and I love it!  Hope that anyone who runs into the same problem will be able to get the needed help in time! Cheers, 

  • EFI Firmware 1.7 on't update on late 2012 Mac Mini

    I bought a 500 GB i5 Mac Mini last Dec. I set it up and updated it to 10.8.2 and updated the EFI Firmware to 1.7 to cover the HDMI flicker issues. But I decided that I wanted to start over from scratch so I re partitioned and did a clean install of Mountain Lion from the recovery disk. All was well until the signal my HDTV was receiving from the Mini started flickering on and off. I hooked it up to a VGA monitor (which worked fine BTW) and tried to install the EFI update but now get a message saying "the software is not supported on this system".
    1. Do I need to update my EFI Firmware after a clean system reinstall?
    2. If the answer to number 1 is no, then could there be a hardware problem with the graphics card?

    Welcome to the Apple Support Communities
    EFI updates can only be installed once, so it's normal that the installer says that the update isn't support because you have already installed that update.
    It looks like the EFI update could damage something. Unfortunately, there isn't any Firmware Restoration disc for your Mac, so you should take the computer to an Apple Store. Make a clone with Carbon Copy Cloner before taking your Mac

  • Sound issues since 10.5.2 update

    Since the update I've lost all sound in Xp running in Parallels sound is also gone from Mac mail & trash.
    Other areas maybe too.
    Volume control stuck and can't be moved also.
    Anyway I've discovered if I create another administrator account and log in sound and volume control work. (not sure about Parallels though but I think it should)
    So it looks like to me that the update has damaged the account somehow. Is that possible.
    Is there a way to transfer all my programs and files to this new account without any reinstalling?
    Would I have to install all my programs again?
    Is this the correct way to solve this problem?
    New to Mac's (one week) so please keep it simple.

    Since the update I've lost all sound in Xp running in Parallels sound is also gone from Mac mail & trash.
    Other areas maybe too.
    Volume control stuck and can't be moved also.
    Anyway I've discovered if I create another administrator account and log in sound and volume control work. (not sure about Parallels though but I think it should)
    So it looks like to me that the update has damaged the account somehow. Is that possible.
    Is there a way to transfer all my programs and files to this new account without any reinstalling?
    Would I have to install all my programs again?
    Is this the correct way to solve this problem?
    New to Mac's (one week) so please keep it simple.

  • Blue screen after bios update

    Processor: i5-4570
    Mainboard: Msi H87M-G43
    Graphics Card: GIGABYTE Radeon R9 280X Overclock Edition
    Memory: Kingston 8gb(2x4gb) 1600MHZ
    Display: Dell S2340L
    Storage: WD Blue 1TB
    Casing: Corsair Carbide Air 540
    PSU: Superflower Golden Green 600w
    OS: Window 7 Home Premium OEM 64bit
    Bios version: 1.0
    I didnt set anything. I just click the update button for the verison 1.4 from live update 5. After the bios finish updating the system auto reboot then the blue screen appear.
    I still can go in the bios.
    The blue screen appear means the update has damaged my motherboard?

    try a CMOS clear with power cord removed >>Clear CMOS Guide<<
    once you have reset the CMOS make sure the boot order and drive modes are correct and retry for a boot!
    <<<Do not use MSI Live Update to do BIOS flashes as it has a awful reputation for bricking BIOS chips>>>
    if doing the CMOS clear doesn't get you back up and running then you may need to attempt a manual update using either M-Flash or by >>Use the MSI HQ Forum USB flasher<< and make a bootable USB stick with the BIOS files on it!

  • Iphone ios 6.1.3 wifi bluetooth problem since update

    Hi,
    It seems that Apple has a problem with the Iphone 4s IOS update 6.1.3.
    Since i updated my Wifi and Bluetooth on my phone have fallen over / failed.
    wifi is unable to be switched from off to on (greyed out)
    Bluetooth will not turnon either just icon circling around.
    After looking at some of the meesages on he it would seem that the update has damage the phone???
    I have backed up, removed all settings, restored the phone but no joy.
    I will try putting the phone in the freezer, yes this has been suggested as a fix.
    Failing that i will have to return the Phone the Vodafone /Apple for them to sort.
    Not very happy at all.
    Apple please sort this issue, and quick!!!

    Same problem. I've tried the apple support site recommendations... reset network settings etc. No result. The problem is that there is no place to enter the needed pin code any more. The dialog box needed for that is completely absent. And on top of that if you actually want to communicate with a tech support person (for a problem caused by Apple programming to begin with) you will actually have to pay for said support first. I have to say that Apple is feeling more like Microsoft all the time. A company I avoid like the plague because of experiences like this that I have had to suffer over and over again. To bad. Apple was a really great company. A really great movement in the tech world at one time. No more though. Time to quit beating a dead horse with a stick and switch to Samsung I guess. That means getting rid of all my apple laptops and desktops too I guess. What a bummer!

  • Issue with updating service notification using BAPI_ALM_NOTIF_DATA_ADD

    Hi experts,
    I would be very grateful if anyone could help me out with this.
    I need to update the object code damage code and cause code of the notifications (transaction iw22) through portal. For this I have made a z BAPI and am calling it through portal. Now for my notification type H1 the damage and the object part are mandatory and the cause part is not. Now while trying to update(through portal) any H1 type of notification which already has object part and damage part filled but cause part blank I am getting the error “notification locked by EPUSER”. When I run the same z bapi on R3 giving same data then error doesn’t come and every thing is updated successfully.
    Even from portal I am able to update other type of notification where either all damage cause or object part is blank or filled. This particular issue happens only the notifications having only cause part is blank.
    The logic that I have used to update the notification where cause part is blank is I have called  first ALM_NOTIF_DATA_MODIFY and have passed the damage code and object code table(notifitem) in its parameter so that damage code and object code can be modified(i haven’t passed the cause code table as passing empty cause code table(Notifcaus)to this bapi throws error) after calling this bapi i have called BAPI_ALM_NOTIF_DATA_ADD and in its parameter i have passed only cause code table(Notifcaus ) (I haven’t passed table having damage code and object code) . So on the successful execution of this two bapis i should get the updated object, damage and cause codes.
    There is a sap note 1058895 which talks about the same issue but even after applying that note same problem is coming. We raised and OSS message to sap to but I guess it won’t be of much help.
    My observation is that after calling ALM_NOTIF_DATA_MODIFY as I am trying to call ALM_NOTIF_DATA_ADD for same notification so its throwing the lock error but the point is that why then from the R3 side this error is not coming. Are there any FM to enqueue   and dequeue notifications like we have for employee numbers in HR module.
    Regards,
    Mehul

    Hi,
    Check out the thread below. It might be of help.
    Re: update PM notification through fm/bapi
    Also, post it in ABAP->General Form for a quicker response.
    Thanks
    Nidhi

  • Updated bios now monitor black with sleep or hybernation

    I have a Qosmio X505-Q832 and received an update notice regarding updating the bios.  So I did update the bios.  Now when I wake the computer up from sleep or hybernation the screen is black.  I'm pretty sure the computer is on.  I hear the fans and I think everything is working except the screen.  If I reboot it works just fine. Once it told me it had no operating system but that was once and it has workd flawlessly since then except from sleep or hybernation.
    I saw a post that mentioned downloading the video driversand reinstalling them which I did but did not change anything.
    I have the recovery discs but don't want to use them unless I have to.  And how do I go about getting the disc started?  I was trying to use them but couldn't get them to start and then thought I would ask here is there was another way to fix this without doing a total recovery.  If I have to use the recovery discs, can someone guide me to the directions as to how to go about using them.
    Thanks so much.
    Nancy

    I doubt that the bios updates have damaged the motherboards.  It's more likely that this will be fixed with the next bios update and until that is released there probably isn't anything one will be able to do about it.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Maybe you are looking for