Update is not applicable while installing Camera Raw

Hello internet.
I just bought a new camera, Nikon D3100.
I shoot with RAW files, and therefore I need to open them in PS CS5.
To do this, I need the newest update of Camera Raw, the Camera Raw 6.3.
When I try to update it, my Adobe Application Manager says "Some updates failed to install. Update is not applicable".
I've tried to uninstall PS, and it's also updated to the newest version.
Regards,
Holten

Hi BornToDrink,
Thanks for
sharing your solution in the forum. This will help others who face the same scenario resolve the issue quickly. Your time and efforts are highly appreciated.
Best regards,
Justin Gu

Similar Messages

Troubles with update mechanism in Photoshop CS6 installing Camera Raw 7.3 update

Greetings,
Attempted an update using the update mechanism from Bridge. CS6 Design Premium on Mac. Received a couple error messages when it completed. Foolishly I did not write down the details. I thought I could just run the update again. When I attempted this, received mesage saying I was updated. But when I use Camera Raw plug-in within Bridge, it says I am still using version 7.2...
How may I attain a sucessful Camera Raw 7.3 upgrade?
I also use Lightroom which sucessfully upgraded,to 4.3 (with Camera Raw 7.3), but I often too use the Camera Raw Plug-in from within Bridge and would like to be on the same 'level'.
I thank you for any insight.
Best regards,
Alan

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Camera Raw forum, where you'll get more specialized help.

Updater not able to install Camera Raw 6.7. Error Code: U44M1P7

Any thoughts?

Hi,
Kindly follow the below mentioned steps to make sure your updates work fine:-
For Mac:
1) Restart your Mac
2) Launch PS
3) Go to Help - Updates - Preferences and make sure the box for ACR is checked.
4) Check for Updates
5) Select Camera Raw 6.7 update, Click on Update
else Run "AdobePatchInstaller.app" from the mounted Camera_Raw_6_7 dmg file you downloaded from adobe.com
6) Mac will ask you to enter your Password for the logged account. Enter the password.(Make sure you have full privileges)
7) Quit PS and let the updater run.
8) Quit Updater after successful installation
9) Verify ACR
For Win:
1) Restart your System
2) Launch PS
3) Go to Help -> Updates -> Preferences and make sure the box for ACR is checked.
4) If you are updating through Help->Updates, then Check for Updates, Select Camera Raw 6.7 update, Click on Update
else Run "AdobePatchInstaller.exe" from the unzipped Camera_Raw_6_7 updater folder you downloaded from adobe.com
5) Quit PS and let the updater run.
6) Quit Updater after successful installation
7) Verify ACR
ACR update should work fine now, if it still does not work, Please provide us with Camera Raw installer log file at
For Mac:
"Library/Logs/Adobe",
For Win:
Program Fies(x86)\Common Files\Adobe\Installers
This would help us in resolving the issue.
Please mail it to [email protected]
Thanks,
Ashutosh

Failure to install Camera Raw update

I tried to install Camera Raw 6.4.1 update for CS5 (doing so from within CS5) but it failed twice. The screen says to contact customer support which I did, but was told that they no longer support this version and I should go to the forums.
Can anyone help, PLEASE!!!
Pamela
Hoof Pix® Sport Horse Photography, LLC
[email protected]

BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

The Update is Not Applicable To Your Computer when installing patch on Windows Server 2008 R2 machine

When I try to install security patch KB2525694 and KB978542 on my Windows Server 2008 R2 machine, I get the message "The Update is Not Applicable To Your Computer". I am using the following files:
Windows6.1-KB978542-x64 (KB978542)
Windows6.1-KB2525694-x64 (KB2525694)
I believe these are the correct files but no luck installing it. Any help would be greatly appreciated!

When I try to install security patch KB2525694 on my Windows Server 2008 R2 machine, I get the message "The Update is Not Applicable To Your Computer". I am using the following files:
Windows6.1-KB2525694-x64 (KB2525694)
This update has been superseded many times.
If you already have installed one of the superseding updates below, KB2525694 will not be applicable.
For the list of superseding updates, check this list:
http://catalog.update.microsoft.com/v7/site/Search.aspx?q=2525694%20r2%20x64
(click on the result, then click on the "Package Details" tab to get the list below..
This update has been replaced by the following updates:
Security Update for Windows Server 2008 R2 x64 Edition (KB2555917)
Security Update for Windows Server 2008 R2 x64 Edition (KB2567053)
Security Update for Windows Server 2008 R2 x64 Edition (KB2639417)
Security Update for Windows Server 2008 R2 x64 Edition (KB2641653)
Security Update for Windows Server 2008 R2 x64 Edition (KB2660465)
Security Update for Windows Server 2008 R2 x64 Edition (KB2676562)
Security Update for Windows Server 2008 R2 x64 Edition (KB2709162)
Security Update for Windows Server 2008 R2 x64 Edition (KB2718523)
Security Update for Windows Server 2008 R2 x64 Edition (KB2731847)
Security Update for Windows Server 2008 R2 x64 Edition (KB2761226)
Security Update for Windows Server 2008 R2 x64 Edition (KB2778344)
Security Update for Windows Server 2008 R2 x64 Edition (KB2778930)
Security Update for Windows Server 2008 R2 x64 Edition (KB2779030)
Security Update for Windows Server 2008 R2 x64 Edition (KB2808735)
Security Update for Windows Server 2008 R2 x64 Edition (KB2829361)
Security Update for Windows Server 2008 R2 x64 Edition (KB2850851)
Security Update for Windows Server 2008 R2 x64 Edition (KB2876315)
Security Update for Windows Server 2008 R2 x64 Edition (KB2883150)
Security Update for Windows Server 2008 R2 x64 Edition (KB2893984)
Security Update for Windows Server 2008 R2 x64 Edition (KB2913602)
Security Update for Windows Server 2008 R2 x64 Edition (KB2930275)
Security Update for Windows Server 2008 R2 x64 Edition (KB2973201)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How do I install Camera Raw update aget downloading for Photoshop CS6 Ext on Windows 7 64bit

How do I install Camera Raw update 6.7 after downloading for Photoshop 6 Ext 64 bit
on Windows 7?

Camera 6 and its update are for Photoshop CS5 , for Photoshop CS6 we have camera raw 7.

Unable to install Camera Raw update in PSE trial

New Trial user and unable to import Raw file and unable to download camera raw plug-in.
Message title was edited by: Brett N

Frederick2013
I think that I can help but am definitely going to need more specific information:
1. What version of Photoshop Elements and or Premiere Elements do you have and on what computer operating system is it running?
2. If you go to Help Menu/Updates in either the Photoshop Elements Full Editor or Premiere Elements workspace, are there any updates waiting for you?
3. When you attempt to do the Help Menu/Updates, are you getting an error messages relating to Servers or other?
4. What do you want to do with the raw file that you intend to use with an Elements program:?
a. Edit in the Camera Raw Dialog in accessed from Photoshop Elements?
b. Import a raw or dng image into Premiere Elements for media purposes, not editing in the Camera Raw dialog?
5. From what camera are these camera raw files coming?
The answers to all of the above are expected to resolve the matter for you.
Looking forward to your follow up.
Thanks.
ATR
Add On...Are you having trouble posting a reply? I ask since I do not see a reply message in your post which is designed 2.

I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download

I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download / install them. Clicking the update button results in an error message "Application Manager has stopped working". This is a windows system running 64 bit Windows 7

update manually:
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2014 updates: win (http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-2014-updates-links-mac.html)

Can not install Camera Raw 5.6

I just recently purchased a Canon 7d so I had to update my CS4 in order to view the raw files in CS4. Everytime I try and to install Camera Raw 5.6 it keeps saying that installation failed. What am I doing wrong?
Thanks

You can try doing a manual install using the PSE link near the top of the main ACR 5.6 page and then find the CS4-specific instructions on that manual install page.
The ACR update is linked from:
http://www.adobe.com/downloads/updates/

Unable to install the security patches KB2677070 in Windows Server 2008 R2 SP1 (The update is not applicable to your computer)

Dear everyone,
We are trying to install the below KB in our windows server 2008 R2 SP1, however, it will show "The update is not applicable to your computer". There is no problems to install the other patches except this one. Do anyone have idea about it?
http://support.microsoft.com/kb/2677070
Thanks,
Users

Hi,
According to this KB article, there are many exceptions where this KB is not applicable.
Please perform the following steps:
Expand the “For all supported…” title in the File Information section in the KB article.
Find Crypt32.dll.mui files on your machine.
Then compare the file version, file size, data and time with the ones listed in the KB article.
If there is a match, then this KB doesn’t apply to your machine, which is by design.
Hope this helps.
Best Regards,
Amy Wang

Windows Virtual PC (KB958559) will not install, "This update is not applicable to your computer."

Windows Virtual PC KB958559 never installs. It says "This update is not applicable to your computer." Here are my details...
Dell Inspiron M6400, Intel Core2 Duo T9550, Hardware Virtualization is present and has been enabled in bios which was updated recently
Windows 7 Ultimate 32-bit, build 7600.16539.x86fre.win7_gdr.100226-1909
Any ideas? I have seen the other posts but nothing seemed to be a solution. Another strange behavior that may (or may not) be related is that when I try to load the "Turn Windows features on or off" the box loads blank.

Firstly, please read the following article on how to resolve the blank dialog box of “Windows Features”:
The "Windows Features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes
the following code when you try to use Windows Update: "0x80073712"
Then,
empty the Temporary Internet files and %Temp% folder.
At last, download
Windows Virtual PC again and install it.
Best Regards
Dale

RSAT Tools won't install (the update is not applicable to your computer) in build 9926

Trying to install Remote Server Administration Tools in Windows 10 Technical Preview build 9926
Downloaded WindowsTH-KB2693643-x64.msu
Gives error "the update is not applicable to your computer"

Hi SeanSauve,
The below is the information I quoted from the system requirements part on the download page:
Supported Operating System
Windows 10 , Windows 10 Tech Preview , Windows 8.1
**Remote Server Administration Tools for Windows 10 Technical Preview can be installed ONLY on computers that are running the second release of Windows 10 Technical Preview.** Remote Server Administration Tools cannot be installed on Windows
RT, computers with an Advanced RISC Machine (ARM) architecture, or other system-on-chip devices.
Remote Server Administration Tools for Windows 10 Technical Preview runs on both x86- and x64-based editions of builds 9926 and later releases of Windows 10 Technical Preview, including all updates. This release does not run on Windows 10 Technical
Preview builds that are older than 9926. Download and install the version that matches the architecture of the computer on which you plan to install the administration tools. If you are not sure whether your computer is x86- or x64-based, see
How to determine whether a computer is running a 32-bit version or 64-bit version of the Windows operating system.
Remote Server Administration Tools for Windows 10 Technical Preview is available only in United States English (en-US) for this release.
IMPORTANT: Remove all older versions of Administration Tools Pack or Remote Server Administration Tools—including older prerelease versions, and releases of the tools for different languages or locales—from the computer before you install Remote
Server Administration Tools for Windows 10 Technical Preview. Only one copy at a time of Remote Server Administration Tools can be installed on a computer. If you have upgraded to Windows 10 Technical Preview from an older release of Windows, you will need
to install Remote Server Administration Tools for Windows 10 Technical Preview on the computer; no earlier releases of Remote Server Administration Tools are still installed on a computer that you have upgraded to Windows 10 Technical Preview.
Remote Server Administration Tools for Windows 10 Technical Preview includes support for remote management of computers that are running the Server Core installation option or the Minimal Server Graphical Interface configuration of Windows Server Technical
Preview. However, Remote Server Administration Tools for Windows 10 Technical Preview cannot be installed on any releases or installation options of the Windows Server operating system.
Earlier releases of Remote Server Administration Tools (such as those for Windows 8.1) are not available--nor do they run--on Windows 10 Technical Preview.
Server Manager is included with Remote Server Administration Tools for Windows 10 Technical Preview; GUI-based tools that are part of this release of Remote Server Administration Tools can be opened by using commands on the Tools menu of the Server Manager
console. To use Server Manager to access and manage remote servers that are running Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, or Windows Server 2012 R2, you must install several updates on the older operating systems. For more information
about requirements for using Server Manager to manage remote servers, see
Manage multiple, remote servers with Server Manager.
More information, see:
Remote Server Administration Tools for Windows 10 Technical Preview (January 2015)
Please check and see if your current build is Windows 10 build 9926, and the system language, RSAT should not be able to install on the other language versions of Windows 10 other than EN-US.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].

Hotfix KB2277439 Says "The update is not applicable to your computer" when trying to install.

We have two Dell Poweredge 710 servers both running Windows Server 2008 R2 Enterprise x64 using Failover Clustering. These servers host a Microsoft SQL Server 2008 database. They are being back up by a EMC Networker.
Recently, we had the active node hang overnight around the same time that the backups run. After further digging into what could have caused the problem, I found some usefull information on our issue in KB2277439 The symptoms described match our situation
exactly:
[VSS] OnFreeze : preparedToBackup 1, freeGumSent 0, snapshotSet fc0641af-a15b-4b44-a147-69a52e8373b5
0000089c.000086e0::2013/10/08-02:14:15.844 INFO [VSS]
OnBackupShutdown - preparedBackup 1, gumsent 0, snapshotSet 4b907950-8316-42f3-9aa2-18040520b383
0000089c.00006f28::2013/10/08-02:14:15.969 INFO [VSS] HandleBackupGum - Initiating the backup
0000089c.00006f28::2013/10/08-02:14:15.969 INFO [VSS] HandleOnFreezeGum - Stopping the Death Timer
0000089c.00006f28::2013/10/08-02:14:15.969 INFO [VSS] HandleBackupGum - Acquiring lock and flushing DB
0000089c.00006f28::2013/10/08-02:14:15.969 INFO [VSS] HandleBackupGum - Completed the backup Request
0000089c.00006f28::2013/10/08-02:14:15.969 INFO [VSS]
OnFreeze returning true
0000089c.000012c0::2013/10/08-02:14:17.638 INFO [VSS]
OnThaw : preparedToBackup 0, freeGumSent 1, snapshotSet fc0641af-a15b-4b44-a147-69a52e8373b5
0000089c.000012c0::2013/10/08-02:14:17.638 INFO [VSS]
OnThaw returning false
0000089c.000012c0::2013/10/08-02:14:17.716 INFO [VSS] OnAbort - preparedBackup 0, gumsent 0
0000089c.000012c0::2013/10/08-02:14:17.716 INFO Current request is Aborted - Context4194304[VSS] OnThaw : preparedToBackup 0, freeGumSent 0, snapshotSet fc0641af-a15b-
The package I downloaded extracted a file named Windows6.1-KB2277439-x64.msu However when I tried installing the hotfix I get an error saying: "The update is not applicable to your computer"
Can someone please explain why this update is not applicable? As far as the KB article says, it's specifically meant for Windows Server 2008 R2 Enterprise x64 with Failover Clustering installed, which is exactly the setup that these servers are running.
Also I have verified that this hotfix had not been previously applied and I'm pretty sure we couldn't have gotten this as an automatic update. Any help with this would be greatly appreciated.

Hotfixes are special, out-of-band patches created to fix specific problems, so they are never published to Windows Update. Often the hotfix gets incorporated into a released patch that is published on Windows Update. If this hotfix was incorporated
into a released patch, and you applied that patch to your system, the hotfix would see that its files are older than the latest files on the system and would give you this message. Because the hotfix is not for general distribution, there is rarely documentation
saying that it has been superceded.
Generally there is a file list with a hotfix/patch that gives you the version number of the affected files. You can go through those files to see that you have the latest files. The problem is finding the actual patch that updated those files.
Without going through lots of patches, it is hard to find which patch made the hotfix obsolete.
.:|:.:|:. tim

Installing kb2992611 - error message "the update is not applicable".

Hi,
When installing offline patch for kb2992611 on my windows server 2008 R2 enterprise server, I get the error message stating that the update is not applicable to my computer.
On another windows server 2008 R2 enterprise server I am able to install this patch successfully.
Anyone have an idea as to what I should do?
Thanks in advance.
Ciao,
Marco

Hi Ciao Marco,
The kb2992611 system require is Windows Server 2008 R2 SP1, you must install service pack 1 first, if you can not install SP1 due to application limit, you can disable the
TLS 1.2 and choose others version of TLS.
The related KB:
Security Update for Windows Server 2008 R2 x64 Edition (KB2992611)
http://www.microsoft.com/en-us/download/details.aspx?id=44618
MS14-066: Vulnerability in SChannel could allow remote code execution: November 11, 2014
http://support.microsoft.com/kb/2992611
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Installed camera raw, but still nef files on bridge and not opening on cs6

installed camera raw, but still new files on bridge and not opening on cs6

d600
On Wed, Apr 22, 2015 at 2:23 PM, John Waller <[email protected]>

Update is not applicable while installing Camera Raw

Similar Messages

Maybe you are looking for