Update itunes 10.6.1.7 - Zeppelin Air issues

Good morning all,
Wondering if somebody else also is occuring this in order to get it through with Apple.
A few days ago I updates my itunes version to 10.6.1.7. After the update, I have a lot of lag on my airplay, especially to a B&W zeppelin air device. It looks like iTunes is continuously shifting between the computer's speaker output and the zeppelin's output although both are selected.
This only seems to be from my pc to the zeppelin device. Using my iphone to airplay to the zeppelin works fine.
Information about the PC, LAN, Zeppelin:
* Windows 7 x64 fully updated, Quadcore 2.83Ghz, 4GB RAM (of which plenty is available), iTunes 10.6.1.7 x64 version
* 1 Gbps LAN network, minimal usage
* Zeppelin is up to the latest firmware version 1.3.1_01 and is connected wireless (n) to the LAN
- Other devices on the network  don't expirience lagging so the problem seems solely located to iTunes.
- upnp  using the same pc to a remote device also works fine ruling out pc issues.
- reinstallation of iTunes didn't solve the issues as well.
I'm trying to find a older version from iTunes 10.5.x to see if that resolves the issues but so far I haven't found a downloadable installer yet.
Cheers,
Kristof

A few days ago I updates my itunes version to 10.6.1.7. After the update, I have a lot of lag on my airplay, especially to a B&W zeppelin air device. It looks like iTunes is continuously shifting between the computer's speaker output and the zeppelin's output although both are selected.
Experimental advice. But it might be worth checking to see if there's a LSP issue in play here, as per the following document:
Apple software on Windows: May see performance issues and blank iTunes Store

Similar Messages

  • Updated itunes, ipod and now i have playlist issues.

    just upgraded to OS X (5.8). then upgraded ipod to os 4.2. then updated itunes to 10. now i am having interesting issues when i plug the ipod into the computer. of course, everything on the ipod music was wiped out. so i had to sync back all the music. but now i cannot make any playlists when i plug in the ipod. i can only make playlists in itunes on the computer. this is not right. i made several playlists on my ipod before. when i hit the file drop down menu, none of the playlist options are highlighted when i have the ipod selected. what has happened or what do i need to do???

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Update iTunes 7.3.2 and now sync issues with AppleTV

    I knew it, I installed the latest upgrade as it said it solved some issues with iPhone Activation etc and added stability, well Apple is very stable, so stable it does not sync anymore with iTunes.
    I tried removing and reconnecting it to iTunes, this at first seemed to help, but the sync stopped after 10 minutes...
    Anyone else have issues?

    I would have to agree Capaho because I tried everything before...
    Well its official, after trying every troubleshooting tip & talking to tech support which sent me some more help info. My ATV is dead. I thought I had a revelation on what could be done to fix it but I was horribly wrong...I unplugged the unit for the 15th time to reset it and when I plugged it back in I heard the pop, and ATV was on its way to the Great Gigabyte in the sky.
    I bought the unit July 5th. It now sits in the bottom of my trash can...funny thing is Im gona waste another $400. I cant find my receipt and it doesnt matter cuz even tho it was efed before it "popped" i still get blamed for user error.

  • HT4437 i want to play contents from macbook pro to B&W zeppelin air wirelessly,set up is done but can't see airplay button in iTunes,do i need airport express?why?please help.

    i want to play contents from macbook pro to B&W zeppelin air wirelessly,set up is done but can't see airplay button in iTunes,do i need airport express?why?please help.

    There are at least 3 versions:
    http://www.bowers-wilkins.co.uk/Support/Support/iPod_and_Computer_Speakers/Overv iew.html
    Original Zeppelin - I've had this for several years.
    http://bowersandwilkins.custhelp.com/app/home/p/6,26
    Zeppelin Mini.
    http://www.bowers-wilkins.co.uk/iPod_and_Computer_Speakers/iPod_and_Computer_Spe akers/Zeppelin_Mini/Overview.html
    Zeppelin with Airplay.
    http://www.bowers-wilkins.co.uk/iPod_and_Computer_Speakers/iPod_and_Computer_Spe akers/Zeppelin_Air/
    (I wouldn't regard the MM-1 as a Zeppelin but not sure if B&W call it that).
    I can't do much more to convince you!
    You could always update that wiki
    AC

  • Air Play Symbol Disappeared and cannot play Zeppelin Air through Itunes

    Christmas 2012 we bought the Zeppelin Air Speaker, we had Itunes on the laptop and was able to play music through Air Play icon.  Unfortunately the laptop broke, so I have had to use our other laptop, it has the up to date version of Itunes, the speaker comes up on the laptop as connected but the airplay icon is no longer on Itunes, can anyone help as not too sure what to do.  Thank you.

    I have resolved this now with updating my speaker and restarting itunes and the speaker and it now all works.

  • Trying to update iTunes 10.5.2 my mac book air keeps telling me that it is installed but when i plug my new iPad and iPhone it keeps saying it has only 10.3 iTunes can anyone help?

    I m trying to update iTunes 10.5.2 my mac book air but it keeps telling me that it is installed but when i plug my new iPad and iPhone it keeps saying it has only 10.3 iTunes and it needs at least 10.5 version can anyone help?

    no that does seem to work it is as if it is not recognising it. it says installed on screen but when plug new ipad and iphone4s in it says new version required but i have ran a system update and it says everything is updated

  • HT1414 i cannot sync my new ipad air to my laptop windows 8.1, tried updating itunes etc

    I cannot complete a sync with my ipad air to my laptop. I've tried updating itunes on both but same problem of 'waiting for changes to be applied' message coming up. My iPhone with the same software connects and syncs ok. Any suggestions will be appreciated.

    Are you running the latest iTunes (11.0.3)?
    If so, check this troubleshooter:
    iOS: Device not recognized in iTunes for Mac OS X

  • Lost zeppelin air icon from iTunes

    Our icon for air play on itunes has gone. We cannot play our music through our Zeppelin Air anymore, from any of our devices. We have tried to reset Zepplin but it is still not showing up on itunes.
    Anyone had same problem?
    Thanks for any advice.

    This means your music is still on your computer.
    Now, what you can do is re-import it to your library.
    If iTunes is open, close it.
    Hold down the Option key while clicking on the iTunes icon in the dock. This should bring up a dialog stating that iTunes needs a library in order to continue. Click the *Choose library* button, then navigate to the folder you found earlier.
    This should bring your music back safely.
    If you get stuck along the way, feel free to ask questions!
    ~Lyssa

  • Can you connect your iPhone to Mac air wirelessly to update iTunes

    Is it possible to connect one's iPhone to iTunes via wireless/bluetooth to Mac Air to transfer files or sync the phone through iTunes without using the USB cable?

    My question is very similar to clair_franks above.
    Due to employer restrictions, can my iPhone sync to iTunes on my iPad with out the middle steps of a laptop?

  • How can my ipod touch cannect to my bowers & wilkins zeppelin air speaker system?

    how can i get a ipod touch 3G connect to bowers & wilkins zeppelin air speaker system?

    To update
    The Settings>General>Software Update comes with iOS 5 and later.
    Connect the iPod to your computer and update via iTunes as far as your iPod model allows
    iOS: How to update your iPhone, iPad, or iPod touch
    A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)       
    https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
    - A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
    Identifying iPod models
    I suspect y have the 1G
    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Apple Club - filter apps by iOS version.

  • Error message "The currently attached accessory is not supported by this iPod" is shown when connected to my Zeppelin Air Dock.

    I have 2 iPods, one is a 60GB Classic formatted to Mac the other is a 80GB Classic formatted to Windows. When either is connected to my Zeppelin Air Dock, a message appears on the iPod saying "The currently attached accessory is not supported by this iPod"
    I have updated the firmware on the Zeppelin and have the latest updates on each of the iPods.
    The Zeppelin works fine and connects to the computer and laptop without issues.

    I'm having the same problem, it just started today. I've been running w/ the nike+ sensor and receive w/ my iPod nano for 6 months, logging 75 runs, so don't understand why I'm getting this error now.
    Can someone please reply w/ how to resolve this issue? I have Nike+ challenges coming up soon that I can't miss. Thanks!

  • Zeppelin Air Toruble with my iPhone 4

    Basically when I connect my iPhone 4 (4.3.1) to AirPlay and try to adjust the volume using the buttons on the unit or the zeppelin remote it becomes really glitchy e.g. I have hit volume up and the volume decides to go down vice versa.
    I had this trouble with my 1st Zeppelin and returned it for a replacement. On getting my second zeppelin I tried it without updating the stereo's firmware and everything was fine, so I updated the firmware again and the problem arose again.
    I was wondering if anyone with the same setup as me (Zeppelin Air and iPhone 4 (4.3.1) could check if they have the same issue, hopefully from this information I will be able to determine if it's my phone software (my Dad's 3GS (4.3.1) works perfectly fine) or if it's the latest Zeppelin firmware causing the bug with my phone.
    Thanks in advance
    Message was edited by: Tattieee

    I've had a client experience what you're describing. He has both iPhone 3GS and 4. He doesn't know what phone he was using at the time (not conscistent like yours), sorry. I'm figuring it's a issue with the Zeppelin, but that's a hunch at best. And if you've managed to isolate it on you're iPhone 4, then who knows... Can't say what firmware version he's on (on the zeppelin) but he got it in the beginning of april and have definitly not upgraded it. Don't know about the version on his iPhone 4 either...
    I've got one of these as well but havn't had that perticular problem. Have had to restart mine (zeppelin) on several occations because it disconnects and stays that way from the WiFi (Airport Extreme).
    I have mostly used it with Airfoil, but a fair bit on my two iPhone 4s (with 4.3.1 and .2) as well and it's worked fine.
    This is my details of the Zeppelin Air.
    AirPlay Firmware:
    2.1.68.8327
    Host Firmware:
    1.00.00
    BTW, are you using ethernet or WiFi?
    I'll try updating my zeppelin if there's a new version that you're using. If I run into problems I will post them here.
    Regards
    Niklas
    Message was edited by: Niklas O

  • Anybody else having problem with iPOD TOUCH ios4.3.3. deleting the special speakers menu on the Zeppelin Air ?

    The latest ios firmware update for the iPOD TOUCH (4.3.3.) has accidently removed the special speakers menu from the B&W Zeppelin Air.
    How can this problem be reported to Apple to fix it ??????????????????

    I recently purchased an infiniti FX35 with the ipod integration. After visiting the local apple store "Genius Bar" and speaking on the phone with an "apple expert"; neither the genius bar or the apple expert heard of such an integration option in new cars being sold. They wanted more information from me about how it work rather than them assisting me with my problem.
    Anyway, after alot of experimenting I got my ipod touch 2G running firmware 3.1 to work somewhat consistently.
    Turn off wi-fi on the touch, power off then back on, go the ipod menu and select playlist. Attach the touch to the infiniti supplied cable through the dock connector. Select the ipod option from dash board. Playlist, songs, artists, etc will appear on the dash display and begin playing.

  • I have updated itunes and the newest software. My home button does not work.  Please help

    I have updated itunes and the newest software. My home button does not work.  Please help

    It could be that your button has justy gone out.  You may try getting compressed air to blow out any dust in there.  If that doesn't work, you may have to get your button and ribbon replaced.

  • IPhone 4S bricked after 6.1 update - iTunes errors 21/1611

    Yesterday my iPhone 4S asked me to install the iOS 6.1 update (via the Settings.app) "over the air". After downloading and preparing the update, the iPhone rebooted itself to start the update process.
    Unfortunately, this is where it all went wrong. It seems like the iPhone update failed somewhere along this process. It is now stuck in "Recovery Mode", with the picture showing me to connect the phone to iTunes.
    I have tried countless times restoring the phone via iTunes, on 4 different computers, and on Windows 7 and OS X.
    Nothing works. The restore process fails during the "Preparing iPhone" phase.
    Here's what happens every time:
    I can see the phone being restarted.
    The Apple logo shows up, and a little wheel in the bottom of the screen starts spinning
    As soon as (usually even before) the progress bar shows up on the phone, the device suddenly shuts down
    The iPhone reboots right back into recovery mode, asking me to connect to iTunes
    I'm quite desperate at this point. I have followed all steps imaginable (including turning off Windows firewall and antivirus software), but even then the restore still won't complete. iTunes always gives me the same error: 1611.
    When putting the phone into DFU manually, it gives me another error: 21.
    Both seem to point to third-party security software interfering with the restore process.
    However, having tried this on 4 different computers, I am 99% sure that this is not the issue. So far I've tried:
    HP Laptop - Windows 7
    Asus Desktop - Windows 7
    2010 Macbook Pro 15" - OS X Mountain Lion + Windows 8 (Bootcamp)
    2010 Macbook Pro 13" - OS X Mountain Lion
    Also, I should mention that in Belgium there aren't any official Apple Stores where I can book an appointment at a Genius Bar. Is this 4S doomed?

    @Hasan123
    Hasan123Unfortunately I wouldn't be able to downgrade to lower iOS versions even if I managed to get a restore going...
    @kefo68
    Check your hosts file in Windows / OS X. This guide might help solve your problem: http://jaxov.com/2011/03/how-to-fix-itunes-error-3014-while-restoring-firmware/
    @wuzi36
    I have already tried restoring the phone on my Macbook Pro running Windows 8 Pro, with the latest version of iTunes, but unfortunately the same errors still pop up...
    @Lawrence Finch
    Antivirus and firewall are off, access to the Apple update verification servers is not the problem...
    @.tomaZ
    Errors 1611 (in recovery mode) and sometimes 21 (when restoring in DFU mode).

Maybe you are looking for

  • SAP R/3 Integration to Oracle

    Does any one know that if there is any tools that can help integrate SAP R/3 to Oracle? For testing purpose, can Oracle Apllication Server 10g be installed on Windows XP instead of Windows Server?

  • Audio files sound wobbly in my 7.1.6

    Anyone else experience this -- My audio files (aac,mp3) are sounding a bit "off" when played in Quicktime Pro 7.1.6 They sound ever-so-slightly wobbly, with some faint clicking here and there. The same songs when played in my Itunes (up to date) on s

  • How to use Super as Meta only in Emacs?

    I'm using dwm, and running Emacs inside rxvt-unicode. Since dwm uses left Alt as Mod1 key, i'd like to leave this key only for this purpose. And i need the Super (left windows logo key) to behave as Meta, but only in Emacs. I found sevaral ideas in d

  • How to filter data and display

    hi there i have a product page and ploduct list menue. i want to be able to filter products. for example on my list i have shose. and they come in diffrent sizes. when cutomers selects size 10 from down down list databse lists all shose size 10. how

  • Error in reversing PGI

    Hi, I have a scenario where OBD got created for a STO and it was PGI'ed. After PGI, IBD got auto created. After sometime, we came to know that, the mov. types for some of the items in OBD was wrong which was 603 instead of 641. We observe that mov. t