UPDATE iTunes BEFORE you install 1.1.3

I had a bad time installing 1.1.3, it wouldn't work, then I found that iTunes had to update as well, installed the newest iTunes, restored my iPhone, and all is good in the world again.

to 1.1.3 before I did the iTunes update. Maybe just lucky.

Similar Messages

  • Does Mac OS X ask you to update firmware before you install?

    Will Mac OS X ask you to update your firmware if a firmware update is available for the computer?

    No.

  • Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

    Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

    Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • Getting error message that states itunesexe has been set to run in compatibilty mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it .How do i turn off compatibility mode?

    recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.

    Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself): 
    iTunes for Windows: How to turn off Compatibility Mode

  • Do you have to create SPN before you install Sharepoint 2013 Server?

    Hello Community
        After installing WS2012 and Sharepoint 2013 Server on it, I
    created SPN's for the SQL Server and domain user.
        While creating the web application I ran across some information
    that says if you use Kerberos Authentication you have to setup the SPN's
    in AD DS before you install Sharepoint 2013 Server.
        That doesn't make sense to me because it might be possible that
    SPN's may be needed to be created throughout the lifetime of the
    Sharepoint farm which could be forever.
        So the question is, is it true that you can only use Kerberos
    Authentication if you created the SPN's in AD DS first?
        Thank you
        Shabeaut

    You can create it after-the-fact, you just may have access issues until it is created and the user account running the pool is logged off and back on again. Right, it has nothing to do with the installation status of SharePoint.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • After installing "OS X Mountain Lion" it saypowerpc applications are no longer supported" how to fix this, and why they dont say before you install that this might happen!

    after installing "OS X Mountain Lion" it saypowerpc applications are no longer supported" how to fix this, and why they dont say before you install that this might happen!

    Office 2004 Applications Won't Work in Lion
    You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
    You may want to consider as well:
    These two suites are similar to Libre Office but not as current or as well-supported:
    NeoOffice
    Open Office
    And, then there is Apple's iWork suite:
    Pages - word processing and layout
    Keynote - presentation
    Numbers - spreadsheet
    Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
    (Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

  • Should you remove old versions (CS5) before you install creative cloud?

    Should you remove old versions before you install creative cloud?  Right now I have CS4 and CS5 on my system.  Iwould like to remove them before I move forward.

    Rod as Badavaraj indicated there is no requirements to keep the older versions installed.  If you have particular compatiblity needs with plug-ins or working collaboratively with other Adobe users using those versions however you may want to keep the older software titles installed.

  • I've just updated itunes and it has disappeared from my PC- the previous shortcut won't work and it can't locate on my file search- this is the second time this has happened when updating itunes- APPLE you're going donw the tubes slowly but surely..

    I've just updated itunes and it has disappeared from my PC- the previous shortcut won't work and it can't locate on my file search- this is the second time this has happened when updating itunes- APPLE you seem to be going down the tubes slowly but surely..

    its not apple going "down the tubes" its that you have windows junk.  These opinion best left at apple.com/feedback
    you need to completely uninstall itunes and all components
    see these for help
    http://support.apple.com/kb/HT1925
    http://support.apple.com/kb/HT1923
    Peace, Clyde

  • HT2311 read before you install itunes 11.0.1 will not open, why?

    trying to connect apple imac to apple tv...had to updated itunes to 11.0.1 to access itunes library on tv...downloaded new itunes from apple website...asks to open 'read before install itunes' button....but it won't...please help!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Update iTunes before or after updating iPhone?

    I can't seem to find this answered anywhere on Apple's site.
    I'm on iTunes 7.5. When I plug in my phone and check for updates it says 1.1.3 is available for download.
    Is it safe to run the update from 7.5 or should I install 7.6 first and then mount the iPhone?
    Presumably 7.6 just adds the movie rental capability? Can I do without it altogether and still have 1.1.3?
    tbh I may wait on 1.1.3 if there's a problem with order of sms messages, but the new features look worthwhile, especially if some bugs in Google maps have been fixed.
    Thanks for any advice

    Yes, it is safe to update your phone using iTunes 7.5.
    The update supposedly requires at least iTunes 7.5 or above however I used iTunes 7.4.2 and everything worked fine.
    If you decide to update iTunes to 7.6 I recommend you update your QuickTime first to 7.4 then iTunes. As always repair permissions both before and after the install if you are on the Mac OS.

  • Updating itunes before syncing new touch:  do I need to install safari?

    ...and mobile me as suggested by apple? or can I just install itunes/quicktime?Thank you in advance for your help. I have only ever had one ipod (the original nano) and have finally moved up to a touch! (Can I keep both and continue to update both on this one laptop?)

    On a Windows system, just installing iTunes and QuickTime is fine. (Safari is only required for Store access on Mac systems.)
    I have only ever had one ipod (the original nano) and have finally moved up to a touch! (Can I keep both and continue to update both on this one laptop?)
    Yes you can. There's no limit on the number of devices you can connect to your existing iTunes library. (I'm only really using my Classic nowadays, but I've had up to three different ipods running off a single library before.)
    If you want to put different content onto each different device, the following document might be of some assistance:
    [How to use multiple iPods with one computer|http://support.apple.com/kb/HT1495]

  • I am unable to upgrade iTunes on my PC and unable to un-install iTunes before re-install.

    Itunes will not updat on my PC nor am I allowed to un-istall so I can re-install hence I can't update my ipad or iphone 3GS. One error message tells me that it can't find 'itunes.msi' Help please!

    One error message tells me that it can't find 'itunes.msi'
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • You cant open the application read before you install' because it is not supported on this architecture

    it wont let me install anything that is kinda new...not even the latest itunes

    That's because you are trying to install Intel apps on your PowerPC-based Mac.
    PowerPC-based Macs are so outdated and most of the apps now aren't compatible with them, including the most recent iTunes version (the latest iTunes version with PowerPC support is 10.6.3). Search apps for PowerPC (so you will be able to run them on your computer) or buy a new Mac

  • Caution: Before you install Mountain Lion ...

    To avoid problems, you should drag-out the Diagnostic Disc that came with your machine (if there is one), (mine boots with the "D"-keyboard-key held-down whilst booting), and verify that all locations in RAM are working properly by doing a full diagnostic (this may take a few hours -- be patient).
    If the RAM locations don't work properly, it can cause all sorts of problems with your machine -- take it to the Apple Store at the Mall !
    Then you should boot-up normally, and go into the "Utilities":"Disk Utility" application, select the indented internal drive, and hit the "Verify Disk" button.
    If the internal drive doesn't "Verify" properly, you need to reboot into the Lion "Recovery partition, activate "Disk Utiltity" from there, and "Repair Disk".
    If it repairs the disk properly, then using the same program, re-"Verify" the internal disk.
    Then you should use "Disk Utility", and "Repair Permissions" before, (and probably after), installing Mountain Lion.

    Tech Tools Pro might be worth buying for a complete suite of computer checks before an upgrade

  • The installation Wizard requires that Microsoft Document Explorer is installed before you install Project SDK 2013

    Hi,
    I am trying to install Microsoft Project 2013 SDK on my computer and it wont install.
    The wizard comes to a point where it tells me to install Microsoft Document Explorer. I press the install button but nothing happens, it is not installed.
    I tried this many times but Microsoft Document Explorer is not installed.
    I also tried to installing from other links on the forum but still does not work. Is this a bug with the installer ?
    I am using : Windows 7 ultimate; MS Project 2013 Pro, VSTO 2013 PRO and Excel 2013.
    Any comments or suggestions really appreciated.
    Jake

    Tjek you do not already have it installed. I had a similar problem where an old version was installed.
    This might be a question for a another forum (http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup) as i do not think many people here have a good
    knowlegde of this component.

Maybe you are looking for

  • How can I run a copy of photoshop elements from a hard drive from a broken laptop on my new imac

    The laptop had motherboard issues so have taken the hard drive out and am running it externally on a new iMac - if i try to run the program it says error code 6 and that i need to uninstall then reinstall the product but I bought it online so don't h

  • Full update not getting all records from PSA to ODS

    Dear BW Masters, I am working with MM module. Iam using standard extract structure 2LIS_02_ACC Iam doing full update. Getting full data 1300 records in to PSA. But getting only 298 in to my ODS. I tried changing fields in to KEY FIELDS AND IN TO DATA

  • How do I create an array of results?

    I'd like pass an array with test results to LabVIEW code for csv writing. How can I do it? I'd would also need arrays with limits. Something like this does not exist, correct? How do I create it. Do I use a looping option in the test? I cannot find a

  • Creating and selecting from a dynamic table

    Hi, Iam trying to create a table dynamically and selecting from it in same plsql block, but am getting "table doesnot exist" error. however if i just create a table dynamically and then do a select on it seperately it works.. below is sample code for

  • Not a valid date - error in Web dynpro hosting the form

    Dear Experts, I have an interactive form embedded in an ABAP WebDynpro screen. It has a date field which is filled by the user. This field has been working perfectly fine except for one user. Whenever he tries to enter a date and validate (round trip