UPDATE: Lifeline Firmware Version 4.0.4.14600 (7/16/2013)

Firmware Version 4.0.4.14600 for EZ Media & Backup Center 
https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/32028 
Firmware Version 4.0.4.14600 for ix2 and ix2-dl 
https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/31178 
Firmware Version 4.0.4.14600 for ix4-300d 
https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/32096 
Firmware Version 4.0.4.14600 for px2-300d 
https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/32094 
Firmware Version 4.0.4.14600 for px4-300d 
https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/27363 
Firmware Version 4.0.4.14600 for px6-300d 
https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/27366 
Firmware Version 4.0.4.14600 for px4-300r 
https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/27368 
Firmware Version 4.0.4.14600 for px12-350r and ix12-300r 
https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/23142 
Firmware Version 4.0.4.14600 for px12-450r and px12-400r 
https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/32092

Al,
I don't understand your anger. In your first message
you posted that you installed OS 9 and updated it to
9.2.2. So why don't you do that again on the 700 MHz
iMac?
I find it very amusing that somehow you see anger in my post. That is realy very funny! The reason I didn't just simply install OS 9 on the 700MHz Imac is stated in my original post. I would need a special (the original disk that came with this computer) bootable OS 9.1 disk to install 9.1 on this particular computer. However if there are retail 9.2 or greater disks available then that would work to. I own a retail version of 9.1 that I used for the 400MHz Imac. That wont work on the 700MHz Imac. So now I have to buy a another OS 9 disk. Thanks for your input. Al

Similar Messages

  • Air update phone firmware version

    How do you update phone firmware version?
    1. Download Nokia pc suite and use NSU or Nokia ovisuite (For Windows User only)
    2. Try over the Air update (MAC/Windows User)
    If your mobile data rates allow, try doing an over the air update. Support varies by phone, variant and software
    Go to tools >Utilities> Device manager (location may vary by device)
    There should be an updates tab
    This functionality may not be available in your device. Contact your service provider for more information
    To view or update the current software version of your device or to check the date of a possible previous update, select Menu> Tools> Utilities> Device mngr
    To check whether software updates are available select Options> Check for Updates
    First off BACK UP YOUR DEVICE! make sure you have a back up of the memory card and also the device memory and make sure that the battery of your device has enough power or connect the chager before starting update. To start the update select access point. The device starts to download the device data.
    When the data is downloaded the update description is displayed. Select Accept to accept the download of the update package or cancel to cancel the download. IT may take several minutes and you can use your device during the download but not during installation time.
    Server Profile Settings
    Menu> tools> utilities> Device Manager
    to add a new server profile seleat Options> New server profile.
    Contact your service provider for correct settings
    Server name- Enter a name for the configuration server
    Server Id- Enter the unique ID to identify the configuaration server
    Server Password- Enter a password to identify your device to server
    Access point- Select the access point to connect to the server
    Host Address- Enter the url address of server
    Port-Enter the port number of the server
    User name & password- Enter your username and password for the server
    Allow configuration- To allow receiving configuration settings from this server select yes
    Auto Accept all requests-To have your device ask for your confirmation before accepting configuration from this server. Select NO
    Network Authentication- Select if network authentication is used. Enter your Network username and Network password to identify your device to the server.
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

    Like how did nothing happen  >> no connection >> no message ??
    CAN I UPDATE   >>
    http://europe.nokia.com/support/download-software/device-software-update/can-i-update
     jje

  • Updating software/firmware version for 4G ipod

    Hello, I have a 4th Gen iPod (click wheel w/ grey screen) and recently bought a Pioneer car receiver that has an iPod USB connector built in. When I plug my iPod in, the car doesn't recognize it. The installer told me to update my firmware and he tested his iPod video and it worked fine. My 4G software version shows as 3.1.1 and it appears to be the most recent version. Are there other versions out there that I could upgrade to in attempt to make this work? Also, what is firmware and is it upgradable indepently from the standard iTunes upgrades?
    Thanks

    what is firmware
    http://docs.info.apple.com/article.html?artnum=93772
    is it upgradable indepently from the standard iTunes upgrades?
    No.
    My 4G software version shows as 3.1.1 and it appears to be the most recent version.
    It is.
    I would suggest that the iPod model you own is maybe not compatible with this Pioneer unit. The fact that the installers video iPod worked doesn't mean anything since you don't own that model.
    Do Pioneer say that the receiver is compatible with all iPods, or just certain models?

  • Since HUB 2 updated to firmware Version 8.1.H.U

    Since HH2
    Current firmware
    Version 8.1.H.U (Type A)
    Last updated
    22/08/11
     my PS3 has no longer been able to connect wirelessly. It keeps saying the Wireless key is wrong. I know the key is right because I can connect with another wireless device using the same key.
    Thinking the PS3 was faulty I took it to another router (Buffalo) and it connected fine wirelessly. Its only the HH2 since it was updated on the 22 Aug 2011!!
    Some help please BT?

    Since HH2
    Current firmware
    Version 8.1.H.U (Type A)
    Last updated
    22/08/11
     my PS3 has no longer been able to connect wirelessly. It keeps saying the Wireless key is wrong. I know the key is right because I can connect with another wireless device using the same key.
    Thinking the PS3 was faulty I took it to another router (Buffalo) and it connected fine wirelessly. Its only the HH2 since it was updated on the 22 Aug 2011!!
    Some help please BT?

  • Cannot update to Firmware version 4.1.108.32627 on ix4-300d

    Just bought an ix4-300d with 4-3Tb drives.  I cannot update Firmware to the latest version.  After uploading to the NAS, when I click 'Apply' or 'Apply all pending updates", I see a message that says "The update file is being decompressed".  After several seconds, I then receive dialog box that says, "Error – The software could not be updated."
    Any ideas what the issue could be?  Are there any log files to look at?
    Current Version:         4.1.102.29716
    Upgrade to:                 4.1.108.32627

    Hello dcsantis
    Check the event log for any abnormal storage alerts such as degraded storage, recoverable errors, missing drive alerts, etc.  Those sort of alerts could contribute to the firmware update issue.
    Some basic steps to try for the issue:
    Re-download the update file again and check the md5 checksum from the download page.  If the checksum fails, try downloading from a different browser or computer and check it again.
    Try uploading and applying the file using a different browser or computer.
    Try re-seating all disks with the unit off, then try uploading and applying the update file again.
    Try swapping disks 1 and 4 to opposite bays, then try uploading and applying the file again after booting.
    LenovoEMC support should be contacted to create an incident if the above steps do not work.
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • Update Nokia phone firmware version

    How do you update phone firmware version?
    1. Download Nokia pc suite and use NSU.(For Windows User only)
    2. Try over the Air update (MAC/Windows User)
    If your mobile data rates allow, try doing an over the air update. Support varies by phone, variant and software
    Go to tools >Utilities> Device manager (location may vary by device)
    There should be an updates tab
    This functionality may not be available in your device. Contact your service provider for more information
    To view or update the current software version of your device or to check the date of a possible previous update, select Menu> Tools> Utilities> Device mngr
    To check whether software updates are available select Options> Check for Updates
    First off BACK UP YOUR DEVICE! make sure you have a back up of the memory card and also the device memory and make sure that the battery of your device has enough power or connect the chager before starting update. To start the update select access point. The device starts to download the device data.
    When the data is downloaded the update description is displayed. Select Accept to accept the download of the update package or cancel to cancel the download. IT may take several minutes and you can use your device during the download but not during installation time.
    Server Profile Settings
    Menu> tools> utilities> Device Manager
    to add a new server profile seleat Options> New server profile.
    Contact your service provider for correct settings
    Server name- Enter a name for the configuration server
    Server Id- Enter the unique ID to identify the configuaration server
    Server Password- Enter a password to identify your device to server
    Access point- Select the access point to connect to the server
    Host Address- Enter the url address of server
    Port-Enter the port number of the server
    User name & password- Enter your username and password for the server
    Allow configuration- To allow receiving configuration settings from this server select yes
    Auto Accept all requests-To have your device ask for your confirmation before accepting configuration from this server. Select NO
    Network Authentication- Select if network authentication is used. Enter your Network username and Network password to identify your device to the server.

    Before updating your Nokia's firmware you should check that the newer version does not break Bluetooth and iSync abilities.
    From the many reports on these and other forums, it seems people who have recently updated their Nokia phones firmware have found it impossible to get their phone and Mac to communicate.

  • Can't access internet after updating to firmware 7.3.1

    After updating to firmware version 7.3.1, I lost the ability to access the internet. The AEBS thinks it has an internet connection (the light is green), but it does not. I have tried restarting the AEBS and my cable modem router.
    I had the same problem with firmware version 7.2.1, and had to revert to 7.1.1.
    I'd like to find a solution so that I can make use of Airdisk and Time Capsule.

    Same here: 7.1.1 works but 7.2.1 & 7.3.1 do not with the same symptoms.
    In fact there are now several threads reporting the same loss of internet connectivity. Happily reverting to 7.1.1 restores connectivity.

  • 100% CPU usage. RV180W Firmware Version 1.0.2.6

    Since I updated to Firmware Version 1.0.2.6 cpu usage shows 100% with no sing of lowering.
    So since 2 days now its always runngin at full speeds for no reason.
    Firmware Update, Factory Reset, Setup as before. => 100% CPU
    Is this a common problem? Is there any fix for that? Or at least a way to get informations what causes this?
    Kind reagards
    bartlingja

    Hi, we can try something, please download the firmware thru this link, and install it again, then configure just the necessary configuration. If the issue continues, could you please reach out to our Small Business Support Center and open a Service Request to address this issue? One of our Engineers may be able to work with you and diagnose the root cause. You can find the appropriate contact information for SBSC in the below link.
    http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
    I hope you find this answer useful
    “Please rate useful posts so other users can benefit from it”
    Greetings, 
    Johnnatan Rodriguez Miranda.
    Cisco Network Support Engineer.

  • Firmware version details

    Hi everybody,
    I'm using the nokia 5800, and updated to firmware version 30.0.011. I could'nt find any official description of the changes or addition in that update. anyone have any idea where it can be found.
    Thanx,
    Dodo

    I'm not "the man on the inside", so I can't answer for Nokia's policy, but I do know that some other companies don't publish such information because it can have a negative affect on consumer standing if a long list of errors on a finished device are owned up to...

  • How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

    The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
    I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4).  Everytime I open the airport utility I get the following message: "
    This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
    I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
    One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
    I'm getting the exact same message on my other computer, a Mac Air.
    So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
    Thanks!

    See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • Will firmware version 4.1.7 automatically update to 4.1.9?

    I recently upgraded to OS 10.3 from OS 10.0 on my Imac 700MHz G3. The installation documentation said that I would be prompted to upgrade the firmware if I needed to. I was not prompted so I went ahead and did the OS 10.3 installation. The firmware remained version 4.1.7f4 after the install.
    Not too long ago I went through the same procedure on my Imac 400MHz DV. The only difference is that I started the upgraded process from OS 9.I, then to 9.2.2 using the updates (ending at the latest version of 9), then to 10.0, and then to 10.3. And finally updating with 10.3.9 combo to OS 10.3.9. During that whole process I never new about firmware and never checked to see what version I had before starting this process. After all of the above installations were finished I ended up with firmware version 4.1.9f1.
    My concern is with the 700MHz G3 IMac. I'd like to update to 10.3.9 using the combo update but I'm concerned about the firmware. Will firmware 4.1.7f4 be updated automatically to 4.1.9f1 after the combo OS 10.3.9 is installed? Or should I erase the disk again and start over by first installing firmware update 4.1.9? Actually if that were the case I wouldn't be able to update my firmware since I don't have the correct bootable version of OS 9 on disk that is required for that computer. However my previous experience with the installations on the 400MHz DV suggests to me that that the firmware will automatically be updated. But I would like confirmation from the experts. I'd hate to spend all that time downloading and installing all of the latest updates (Combo 10.3.9, etc.) only to find that the firmware version is incorrect.
    Thanks!
    Al

    Al,
    I don't understand your anger. In your first message
    you posted that you installed OS 9 and updated it to
    9.2.2. So why don't you do that again on the 700 MHz
    iMac?
    I find it very amusing that somehow you see anger in my post. That is realy very funny! The reason I didn't just simply install OS 9 on the 700MHz Imac is stated in my original post. I would need a special (the original disk that came with this computer) bootable OS 9.1 disk to install 9.1 on this particular computer. However if there are retail 9.2 or greater disks available then that would work to. I own a retail version of 9.1 that I used for the 400MHz Imac. That wont work on the 700MHz Imac. So now I have to buy a another OS 9 disk. Thanks for your input. Al

  • Did the most recent update and now my TB Display turns off randomly on both my air and mini. I running  TB Firmware Version:     23.6

    did the most recent update and now my TB Display turns off randomly on both my air and mini. I running  TB Firmware Version:
    23.6

    When did you get this firmware version?  My TBD is at 22.2 and the TBD bus is at 23.4.  I thought I had the latest firmware.

  • How to downgrade my firmware version after a "succesful" update?

    Dear Macusers,
    Is there any way to downgrade my firmware version from 1.5.1 to a lower version? Even if my firmware update has been applied succesfully? I cannot use just the firmware restore CD because that is for an interupted or failed update.
    Greetings,
    Tim

    Hello,
    Many thanks for your reply. Yesterday I posted a topic about this problem with some more details. I hope this may help.
    +"Since today my trackpad and keyboard doesn't response anymore. This problem started after I exit from sleep mode. Then I get a security form where I can enter my password, but I couldn't. So I restarted my macbook pro for about 5 times, removed my adapter and battery, but it doesn't work.+
    +After that I went to iFactory and they said it is apparently because of my latest firmware update 1.5.1. But why does this happen a week after I installed this update? Anyway, he suggested me to downgrade my firmware version with a firmware restore CD. Well it sounded as an straightforward and easy solution until I read that the restoration CD doesn't work when the firmware update already has been applied correctly.+
    +I have read some other topics about keyboard issues and some points are relevant for me:+
    +I'm be able to use an external USB mouse and keyboard.+
    +At system profile by USB, only my iSight, Bleutooth USB host controller and external USB devices are displayed.+
    +The keyboard background light works properly+
    +This problem happens all of a sudden without intervals or strange behavior.+
    +Using Leopard (10.5.2) and Windows XP via bootcamp+
    +I hope I can solve this problem really quick because I need my Macbook Pro badly for my study. Thanks in advance for studying my problem.+
    Greetings,
    Tim

  • I'am using iphone 5 i tried to update the ios 8.0.2 using the shift key in itunes update @ windows 8 i have the file which i downloaded, but it says that firmware version is not compatible. what can i do for it . help me friends

    i'am using iphone 5, i tried to update the ios 8.0.2 using the shift key in itunes update @ windows 8 i have the file which i downloaded, but it says that firmware version is not compatible. what can i do for it . help me friends

    Hello vinoth1986,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning update issues:
    If you can't update or restore your iPhone, iPad, or iPod touch
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Can't update to the latest (v52) firmware version ...

    Other people can update their software but I cannot, although we have the same Nokia device model. What's wrong?
    Update availability is based on many things, including existing Nokia device firmware version, country, and operator. It may be due to one of these variables that your Nokia device isn't eligible for updates. 
    Please note that your mobile service provider, operator, or carrier may not have approved the latest Nokia device firmware available. 
    Nokia produces many different variants of each product (for different countries and languages) and not all variants have the latest Nokia device firmware. It is our priority to update all variants as quickly as possible, and we apologize for any delay. New software may become available at a later date, however, so please check again soon.
    Is there any other way that I apply the new v52 update for my 5800 XM? Even if it voids warranty? Because I really hate my browser and music crashing, battery eating - from full to empty in ~1.5hour, meanwhile the phone is really hot and it is in stand-by - no programs running.
    Info:
    I am from Slovenia, my phone model is RM-356, current version V51.0.006 - installed on 19.11.2010. Language Slovene, 7. Serial - under the battery 0579282. Tryed updating via Wi-Fi on the phone, via PC - with "Nokia Software Updater", both said there is no new firmware available, while there is obviously.
    Any help appreciated!!

    I understand that this is a real bummer and painfull.
    There is unfortunately nothin we can do to help you to get the most recent update if it ain't made available for your device.
    From the power consumption, there could be an issue related to hardware which only a care point can fix.
    However, you could back up what you need and perform a soft reset to wipe the phone memory, then install your apps one by one to check if there is an app or more causing this. You can also try to reinstall the fw with Ovi suite. Just connect and check if it's possible to do so, then back up your content and proceed.
    I cannot guarantee that this will fix it, but it might be worth a try if youre without warranty.
    Have you checked if there are a warranty checker tool available on your local Nokia site?
    The Nokia browsers has always been a bit sensitive, so I suggest you download opera mobile or opera mini and install it on your phone memory (C: ) Should be much more stable.

Maybe you are looking for