Update - Lightbox Display Centering Issue

Upon updating my Adobe Muse software, it appears its created an issue that effects my lightbox display composition widgets. They don't seems to be centered in the webpage anylonger? Help?

Hi Mark,
Unfortunately you hit a bug that causes the lightbox to be off center. This happens if the Target inside the Container for each Composition widget has different strokes for different states.
Until we release a fix for the bug, please make sure you use the same stroke for all the states of a Target, or do not use a stroke at all for that Target. In your case, the Normal/Rollover/Mouse Down states all have a red stroke, while the Active state has no stroke. You can easily select each Target using Layers panel, and then from the states panel select the Active state and use the delete button from the lower-right corner to clear that state's customizations, including stroke.
Sorry about the inconvenience. Let us know if workaround fixes the issue for you.

Similar Messages

A Problem with the Lightbox Display since the update.

I use the lightbox display widget within the featured news widget. Since the update when I add the lightbox to an image it appears on all the featured news tabs when it should only be on the tab I place it in. This didn't happen before the update. Any ideas why this would be or how I can correct it. Strangely, the images with a lightbox made before the update are fine.

I'm unable to reproduce the problem. Can you try re-inserting the Featured News Composition widget on a page and after removing the Text frame (optional step) from the Target of the first tab, insert the Composition: Lightbox Display into the Target of the first tab. Then try switching between the tabs in Design mode and see if the problem persists at your end, also try a preview in browser. The Lightbox Display should appear only for the first tab and other Targets should remain untouched.
Thanks,
Vinayak

Text frame rollover states in lightbox display comp widget trigger area no longer working in V 3.0

Hi
I had text frames with rollover states placed into the trigger area of lightbox display composition widgets
The rollover on the text worked fine, and then when clicked the lightbox composition widget opened
However this morning I updated Muse to the latest version 3.0 (which I was prompted to do) But now all these text frame rollover states no placed into the trigger areas of my lightbox dispslay composition widgets no longer work throughout my entire document
The lightbox will open when I click the text, but the rollover effect will no longer work
Is anyone having the same problem? Is there a way I can fix this? I was supposed to send the site to a client this morning :\
Thanks

Yes. I'm having the same type of trouble with a site I'm updating for a client. I haven't updated the site since before version 2.0.
But now that I've upgraded to version 3.0 my rollovers and linking for the rollovers don't work. Very strange. I too need to get
the site posted ASAP. Please someone help us on this subject.
thanks

MS Access 2013 - There isn't enough free memory to update the display

In Office 2013, in MS Access, I have only created a few Linked tables & queries, but encountered the following error:
"There isn't enough free memory to update the display. Close unneeded programs and try again"

Hi,
In regarding of the issue, please provide us more information to assist you better.
Did the error message pop-up with the special Access database or the some other databases?
If it only happened with the special Access database, it might be caused by the database damaged. Please try to Compact and Repair feature mentioned in the following article:
https://support.office.com/en-us/article/Compact-and-repair-a-database-6ee60f16-aed0-40ac-bf22-85fa9f4005b2
Then, we also might check the Linked tables & queries of database, it also might cause this issue. Or you could upload a sample here via OneDrive.
If the other database also has the issue, please try the method in that
thread:
===
This might be caused by a corrupt VBA registry key. Open your registry editor by clicking START >> RUN and then type regedit and click ok. Then navigate to the registry key below and delete it. When you try to run the VB editor again a new registry
key will be created.
HKEY_CURRENT_USER\Software\Microsoft\VBA
You'll also want to try booting the PC itself into Safe Mode to see if the problem persists.
===
Hope it's helpful.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Latest update and display changes

after the latest update my display changed to higher resolution and when I go inot the preference pane I only show two available resolutions.
What can I do to fix this
Thank you for any help

I tried adjusting the value of layout.css.devPixelsPerPx but that did not help. The only thing that temporarily fixed my display issues was to close Firefox- at that point the screen blacked out and reappeared in full view. As soon as I open Firefox the screen blacks out and reappears showing only a portion of my desktop and all the icons not visible are no longer clickable because the mouse cursor can't reach them.

My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young

How can I change the order of thumbnails so it affects the order in the lightbox when using the composition widget - lightbox display?

Hi, I'm making my portfolio in Muse, and I'm using the composition widget - lightbox display. I imported all the images and then I wanted to reorganize the thumbnails - and when I do that, the order in the lightbox doesn't change and so it's not the same as the order of the thumbnails (after rearranging them). Please let me know if there is a way to fix this quickly, or do I have to do it all one more time

The order the items display in a composition widget is the front to back order of the items. You can rearrange the stacking order of the thumbnails/triggers using the Layers panel and/or the Object > Bring To Front, Send To Back, etc. menu items to adjust the order they're displayed during auto play or when clicking the next/previous buttons.

Why can't I reduce the height of my container box in the Lightbox Display composition widget?

I'm using the Lightbox Display composition widget, I would like to place my trigger at the bottom of my lightbox, I've reduced the height of my image frame but the container box cannot be reduced accordingly. I need to reduce the height of the container box or my triggers will be hidden behind the box. Please advice, thank you.

Hi,
When you insert the light box display, by default it has 3 slides with different components like trigger, container, target, image frame, text box, next button, preview button. You have to change the dimensions for all components for these default 3 images one by one.
Or you can delete 2 of the triggers (that will resul in deleting all of their components from the widget), then you are left with only one image and its components. Later, you can add more images to lightbox display.
Resize the components as per following video:
http://gauravr183.businesscatalyst.com/images/2013-09-26_1440.swf
The steps are, after you have added the widget on the page:
Delete the triggers.
Then select Image frame, resize it. Move close button near it (the 'X' button), resize the text box,resize next and previous buttons and move all of these near the image frame.
Then click on the image frame, till you get "Target" area selected, resize target area and container will be resized automatically.
Regards,
Gaurav Aggarwal

Mac Pro (Early 2008) and HP LP3065 30" display compatibility issue

Hello!
Is there FIX / Workaround to Mac Pro (Early 2008) and HP LP3065 30" display compatibility issue ? ( +w/ ATI Radeon HD 2600 XT display adapter+ ). Its really annoying problem :-/.
Main problem is when i start my Mac, my 30" HP screen dosen't wake up, it always on suspend mode. Sometimes it wakes up on the 3rd try orso, sometimes it ruins my motivation, ideas and i give up (talk about inspiration killer). If i connect PC Laptop to that screen, sreen wakes up straight away. ATI says display adapters "drivers" are included on the OSX install. Great. Weird thing is i didn't recognize this problem at all 6-8 months ago, so i thought my system is fine. So i can't return my HP screen anymore.
My choices are to buy another 30" screen or buy different display adapter; there's two choices atm i think;
*-ATI Radeon HD 3870 512MB PCI-E for Mac Pro (~200€)*
*-EVGA GeForce GTX 285 Mac Edition 1GB (~500€)* (this one has seperate OSX drivers).
_Can anyone confirm if those display adapters work with HP 3065 30" screen ?._
http://forums.macrumors.com/showthread.php?t=687624
http://discussions.apple.com/message.jspa?messageID=9388978
http://discussions.apple.com/thread.jspa?threadID=1794155&tstart=60
Br,
Petri

Thanks for all information. I haven't been Mac user very long . I just want to get rid of my annoying problem. I'll do music composing mainly on my Mac Pro. So, it dosen't really matter what display card i'm using, i want to just make sure it works with HP 3065 .

Brand New MacBook Pro and Display Adaptor Issue

Hello fellow Mac users, I've been a long-time Mac user and owner.
I just got a new MacBook Pro after using a 2006 model for 2 years and am having a display adapter issue that I need help and advice with:
The new MacBook Pro has the mini DVI display connector, my non-Apple external display is does not support the mini DVI, no problem there, I bought the display adaptor...
Except that it doesn't fit the adaptor that fit the 2006 MacBook Pro.
Please See Image at Link:
http://picasaweb.google.com/lh/photo/sdjOcw1jrddqtAfjAU0Trw?feat=directlink
File comment: This is the adaptor that connected my 2006 MacBook Pro to the the display. It changes the connection from the Mac's DVI to fit the VGA connection of my display. There are the four extra pins around the flat pin to the left of the connector.
Somehow the male end of the mini DVI to the full-size DVI adaptor doesn't fit the female end of the full-size DVI to VGA adaptor! Please see the images. It seems a few extra pins prevent the connection!
Please See Image at Link:
http://picasaweb.google.com/lh/photo/4bG788QVKGCOIJUkzHcjKg?feat=directlink
Comment: This is where the problems begin. The flat portion lacks the four holes needed for the DVI to VGA adaptor to connect.
Is it possible to just remove the four offending pins in the Full Size DVI to VGA Male End?
Any help or suggestions highly appreciated, because as of now, my brand new MacBook Pro is less useful than the 2006 model, which can connect to my external display.
Thanks a lot for your help!

Hi Rob with a Mac and welcome to the boards.
My suggestion would be that you simply take the adaptor back and get a mini-display port to VGA adaptor instead.
I ran into a similar problem myself recently when I wanted to connect my own MBP13 to an overhead projector. I had assumed that I could use the mini display to DVI adaptor that I use for the DVI capable external monitor with my new MacBook, combined with a DVI to VGA adaptor that I had for my 2007 MBP, connected to a VGA cable to do the job, but this is not possible.
MiniDisplay to VGA adaptors for the newer MBPs are readily available at Apple dealers or through the online store and not too expensive.
Cheers
Rod

Switch off the automatic update of profit centers on the Balance Sheet acco

Dear all,
In CO I am using only CCA and PCA. But I don't want to have the profit center updated on the balance sheet items.
For example I have it activated for all the automatical BS postings from MM
I need it only for the PL accounts.
How can I switch off the automatic updates of profit centers on the Balance Sheet Account?
Is it enough to deactivate the PCA on the Controlling Area?
Thanks in advance.
Stefka

Hi, remove assignment in 3KEH,3KEI

How do I update my Display Driver

How do I update my Display Driver for Mac Book Pro 15" using NIVIDIA GeForce GT 330M.
ADOBE PHOTOSHOP crashes as the GPU is invalid.

Try forcing the 2nd GPU using GFX CardStatus.
Absolutely no idea if that will even work / make a difference, but it would be interesting.

Please help. Does anyone have a solution re: After the latest update my display has really huge fonts and is unusable

After the latest update my display on my iphone has really huge fonts and is unusable.
I can't even get the swipe bar.

The easiest way to turn off the zoom accessibility feature is to connect your phone to iTunes on your computer. In the Summary pane, click the "Configure Universal Access..." button. On the next screen, under "Seeing", select "Neither" and click OK.

10g-cvs update/import new files issue

Hi all,
when I update a folder in jdev 10g, it doesn't open the new checked in files in the environment
in the old 9i I used to click on 'update folder' and the tool prompted me 'open the new files in the active project?'
now if I update a folder, it just update the already opened files,without importing the new ones
any workaround?
thanks in advance

Hi,
Due to a customer support request, the behavior of prompting to open newly checked out files in the active project was removed when performing CVS update on a folder. If the project file is version controlled and gets updated at the same time, the changes are very difficult to consolidate. For the best CVS experience, we recommend using projects which scan source paths to determine their contents (see Project Properties / Input Paths), and manually refreshing the navigator when new files may have resulted from an update operation.
This issue is being tracked, and we'll keep it in mind.
Thanks.
Paul. JDev Team

HT4943 I paid to subscribe to Ski Mag and Ski Racing but neither subscription has ever updated beyond the first issue. Subscription is active but there never is a new mag...

I paid to subscribe to Ski Mag and Ski Racing but neither subscription has ever updated beyond the first issue. Subscription is active but there never is a new mag...
They got the money but there is no monthly subscription and it says the subscription will expire in Feb!

Hello ISXDesign,
Thanks for the question, and welcome to Apple Support Communities. I understand that you are having issues redeeming a subscription that you have paid for. The best option will be to report an issue with your purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Thanks,
Matt M.

Update - Lightbox Display Centering Issue

Similar Messages

Maybe you are looking for