Update locked up cant restart it
I choose to update itunes a few days ago and it got pretty close to being done and then stopped. I gave it a few hours to complete th update thinking maybe it was just slow due to lots of people using it. I clicked to cancel the update and it did not cancel it or put my icon back on the desktop.
now its all jacked up, i cant figure out how to repair itunes because i run it off an external hard drive.
i cant delete everything and reinstall itunes because it says im still updating...
heeeelp
If you have photoshop cs5 you can only update as far as camera raw 6.7
You can still open the images into photoshop cs5, but depending on what option you choose, there might be something that cs5 won't read.
If you choose the render in lightroom option, then the edits are baked into the file that is opened in cs5. (LR creates a file on the hard drive)
If you choose open anyway, i believe the photoshop acr does the processing and you might see some differences in the opened image (versus seen in lightroom) depending on what adjustments in LR you used.
Did you try a complete shutdown and start instead of just a restart?
I don't think the adobe forums have the option for a sig.
Similar Messages
-
Is fully locked i cant restart or shut down.
.is fully locked i cant restart or shut down. After I connected my iPhone 4s itunes you a message appeared asking if I want to upgrade to iOS 8. I say yes and then downloading it another message appeared saying that an error occurred and then iPhone mi died and showed the screen to connect it to itunes, when I connected , it showed on the screen to update , I accepted and my screen updating but gave an error and caught everything , I can do nothing and is not updating .
.is fully locked i cant restart or shut down. After I connected my iPhone 4s itunes you a message appeared asking if I want to upgrade to iOS 8. I say yes and then downloading it another message appeared saying that an error occurred and then iPhone mi died and showed the screen to connect it to itunes, when I connected , it showed on the screen to update , I accepted and my screen updating but gave an error and caught everything , I can do nothing and is not updating .
-
have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8. -
i dropped my iphone yesterday on its backside from my computer desk to floor.the distance is about 50cm. and it has a phone case. it did't work any vertical direction lock .then i restarted my phone, it recovered.but i am not sure is it ok ?
Good job with trying the two-button reset, that would have been my first advice for you. Next, I suggest you take the reset/update a step further. This step may risk losing the data on your phone, but since it's not working already, there may be no other solution.
On your computer, make sure you have internet acces and the latest version of iTunes installed.
Launch iTunes and connect the iPhone
Press and hold both sleep/wake and home buttons
After ten seconds, only release the sleep/wake button.
If you were successful, the iPhone screen should stay dark and the computer should display a popup.
If you see a message saying "iTunes has detected a device in recovery mode," then continue by clicking yes to each subsequent popup.
If the iPhone displays the silver Apple logo start over with step three of these instructions. -
Iphone is hang, no respond now. even cant restart also
I am update to IOS5, then my iphone is hang, no respond now. even cant restart also. What can i do now??
See this support document for troubleshooting No SIM. If you see 'No SIM' alert on iPhone
-
recent update locked up my computer while trying to install. upon restart all I get is the apple icon and a spinning wheel. what do i do?
Hi Shane, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Tiger Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If it appears to be time for An Archive & Install, which gives you a new OS, but can preserve all your files, APPs, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Be sure to use Preserve Users & Settings. -
Hi
I have a requirement that in few series User shouldn't be able to enter Negative number.I am trying to use the "Configure Update Lock" to achieve the same.The details entered in Configure Update Lock screen are
Name: Lock Series A
Expression: Series Name < 0
Message: Number should not be negative
Save it and restart application server.
I found that it is not working as intended ..means even if i enter a number greater or less than 0 then also i am getting the message and data is not getting saved.
Is the expression correct or do i need to change it ?
2) If the series is already having Negative number and then i want to make use of "Configure Update Lock" to mention something like that from a particular date onwards system should not allow to enter Negative number then what should be the expresssion ? I tried to use If condtion but getting message like "Value should be True/Flase'
Any response is highly appreciated.
ThanksHi
I have a requirement that in few series User shouldn't be able to enter Negative number.I am trying to use the "Configure Update Lock" to achieve the same.The details entered in Configure Update Lock screen are
Name: Lock Series A
Expression: Series Name < 0
Message: Number should not be negative
Save it and restart application server.
I found that it is not working as intended ..means even if i enter a number greater or less than 0 then also i am getting the message and data is not getting saved.
Is the expression correct or do i need to change it ?
2) If the series is already having Negative number and then i want to make use of "Configure Update Lock" to mention something like that from a particular date onwards system should not allow to enter Negative number then what should be the expresssion ? I tried to use If condtion but getting message like "Value should be True/Flase'
Any response is highly appreciated.
Thanks -
my iphone touch screen is locked, i cant open/access the phone, i need to open to read message, check mails and dial, also i want to down load the pic in the phone.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
Cant restart my ipad, ill get error message 9006
cant restart my ipad when connected to my PC, i get error message 9006
kristina
not really enough info. I'll ask a couple of questions but when you reply, keep the following in mind...
Quoted from Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
From ChitlinsCC: "Keep It Short and Simple" - Take your time...
Questions...
can you operate your iPad normally on its own?
is iOS 7 correct, or have you updated to iOS 8x?
can you describe exactly what actions you take up until you get the error 9006, especially exactly the entire error message, verbatim... and what App/OS seems to generating it?
Additionally, I will ask our Hosts to move your question to the iPad forum for a better response.
regards
CCC -
iphone 4s(ios 7) hangs after i reject calls by pressing the on/off button while it is in the lock screen.I restart the phone every time when i reject calls..what can i do ?
I've same problem in iPhone 5c. I was using iPhone 4, problem appears after updating to ios7. I changed my phone to iPhone 5c, looks like it's a bug in ios7. But I think you might not turn on or off your internet connection frequently to reduce this problem. My friend has a same iPhone she never gets such problem like this cause she uses iPhone 5c with Tata Docomo (India) 2g with no internet connection. May be this would be the best solve that you should not turn on or of your internet connection so frequently...
Do any one have any better idea? -
My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.
Start up in Safe Mode.
http://support.apple.com/kb/ph14204
Repair Disk Section: "Try Disk Utility"
http://support.apple.com/en-us/HT203176 -
My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
my account is locked, i cant remember my security question, and I accidentally entered my itunes card in here instead of my other account, so can someone from apple help me out and fix my account (and no, i dont have any rescue email address or whatsoever)
please help me because i dont to waste money for nothingAlternatives for Help Resetting Security Questions and/or Rescue Mail
1. If you have a valid rescue email address, then use this procedure:
Rescue email address and how to reset Apple ID security questions.
2. Fill out and submit this form. Select the topic, Account Security. You must
have a Rescue Email to use this option.
3. This is the only option if you do not already have a valid Rescue Email.
These are telephone numbers for contacting Apple Support in your country.
Apple ID- Contacting Apple for help with Apple ID account security. Select
the appropriate country and call. Ask to speak to the Account Security Team.
4. Account security issues almost always require you to speak directly to an
Apple representative to securely establish your identity as the account holder.
You can set it up so that Apple calls you, either immediately or at a time
convenient to you.
1. Go to www.apple.com/support.
2. Choose Contact Support and click Contact Us.
3. Choose Other Apple ID Topics and choose the appropriate topic for
your issue.
4. Follow the onscreen instructions.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
Apple ID- All about Apple ID security questions. -
While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?
The installer should have gone into your Apple Software Update folder:
C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
Right mouse click the msi file and select INSTALL -
After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?
After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?
After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?
Maybe you are looking for
-
How to retreive the dynamic file name in the AAE configuration?
Hi Guys, I have configured File to File with the integrated configuration and in the mapping i need to retreive the file name dynamically and i am unable to retreive it from the run time in AAE configuration. I am able to retreive with the normal con
-
Need to send my back up email a reset security questions email but the option does not show when I click on password and security
-
Error when reading the access data for the Adapter Engine
We are getting the following error in XI. It started on Jan 22 and resolved on Jan 23 automatically. Nothing has been changed and we don't able to understand how problem started and how it resolved: <?xml version="1.0" encoding="UTF-8" standalone="ye
-
I recently received a 6301 on Orange. It's a great phone with some really nice features. I use a Mac, so modified iSync to copy all my contacts across (using script from www.james-lloyd.com). This worked fine, and all my contacts are in the phone wit
-
Can I use Icloud on a ipad that has not been registered yet. I just purchased it and can not find it
Can someone please help me. I have a brand new Ipad that is not yet registered and can not find it. I only have the box.