Update mac to maverick system shuts down when adding disc menu

I recently updated my mac to Maverick and now when I add my disc menu my system shutdown after stating a serious error occurred.
How can I fix this problem

sweetboo5
This current thread represents a duplicate of the original
http://forums.adobe.com/message/6150140#6150140
A moderator is expected to be along shortly to close the thread we are in now.
Please see your other thread cited above for further exchange of comments.
Thanks.
ATR

Similar Messages

IMac from 2009, 4 GB RAM. System shuts down when I use safari or make much moves on the trackpath.

I've got an iMac from 2009, 4 GB RAM. System shuts down when I use safari or make much moves on the trackpath. Use Mavericks, installed Mavericks again on clean system. Problem still exist. What now?

The 2009 iMaccan take 8 GB ram, while it should run ok with 4 it might be a rather inexpensive test to put in 8 and see if that clears up the problems. Mavericks is going to use almost 2 GB itself so, unless you are opening a lot of applications, you should get by with 4 GB. But I would go for 8 and see how it does.

My system shuts down when i ask it to sleep.. Help??!!

I have The operating system Windows 8.1. When i close the laptop or ask it to sleep it closes without a problem. On restart all the programs i had open are closed and it reboots as if i shut the laptop down rather than asked it to sleep.
I'm doing my dissertation at the minute and I have many tabs open, it just adds to my frustration when i have to re-open all the tabs and wait 2-5 minutes for the system to boot?
Is there anything I can do?
Knowhow at pc world said there is nothing i can do, its just an operating system fault?
HELP!!??
John

Hi,
How do you wake up your computer, pressing FN? How long it takes to wake up from sleep?
I suspect that your computer unexpected shut down when you put it into Sleep.
Please run SFC /scan command to check if there is any error or corrupted files which may cause the issue.
Would you please also check if there is any minidump created after sleep?
To ensure minidumps are enabled, refer to the step “Configure the dump type” in following article:
How to read the small memory dump file that is created by Windows if a crash occurs
http://support.microsoft.com/kb/315263#method2
If there it is, please help to upload it here for our research.
Kate Li
TechNet Community Support

Can I create an external boot drive for an updated Mac OS Maverick system?

I'm currently running Mac OS Snow Leopard (10.6.8) on my 24" iMac and would like to clone my current drive to an external drive & then update that external drive to Mac OS Maverick. First, can this be done to create an external Boot drive for my iMac System? Secondly, can I then select the internal system (OS 10.6.8) or the external drive Maverick OS system at boot time?

Probably will depend on just what your machine is - i.e. how current and fast is the internal hardware.
Generally though, the performance booting off a firewire 800 should be fine for most things with little if any system lag. My late-2008 MBP ( 2.53Ghz core-2 duo, 8GB RAM) runs quite well when booted from a firewire 800 drive (7200rpm - even my 5400rpm portable clone is perfectly useable).
Just remember if using the external for a long or serious work session, if the power goes out, that external is not going to be powered off battery (I keep my full size external drives plugged into a UPS because of that).

Why does my mac book air just shut down when working

When using my mac book air it just shuts down. I usually need to tap several keys to restart. Any help?

If you mean that it just shuts off without any warning, then this might help:
Intel-based Macs: Resetting the System Management Controller (SMC)
Otherwise it needs to be fixed.

I am having trouble updating apps through iTunes, iTunes shuts down when I try to sync.

I am having trouble updating apps that I have on my iPhone through iTunes. I go through the update then when syncing I get an error message iTunes has to shut down. The only way I have been able to work around is to delete the app and download it again. If I don't do this the app says waiting on my iPhone.

I just got the same message myself. Which I have only had 2 times in three years, so I checked here.
http://www.apple.com/support/systemstatus/
There is an issue with the iTunes Store on Apple's end, so I assume that is why we cannot connect.

My new mac Mini (Feb, 2013) shuts down when we are listening to iTunes or Pandora. Any thoughts?

After listing to iTunes or Pandora, our mini shuts down and requires us to log in again. The mini was purchased in Feb of this year. Any thoughts?

From the menu bar, select
 ▹ System Preferences... ▹ Security & Privacy ▹ Advanced... ▹ Log out after … minutes of inactivity: Off
If there's a closed padlock icon in the lower left corner of the preference pane, you may need to click it to unlock the settings. Enter your login password when prompted.
Also check the Energy Saver preference pane for scheduled logouts or shutdowns.

Power Mac G4 1.25Dual shuts down when pressing T for target disk mode

I am hoping someone might be able to help me with this. I am trying to put my G4 dual 1.25Ghz into target disk mode to transfer my apps and settings to my new Quad G5. I start the G4, hold "t", and instead of showing me the comforting bouncing firewire symbol, the computer shuts down completely. Restarting it without holding "t" will result in normal bootup. I have tried a different keyboard and power cable to no avail. I have reset open firmware, reset the PMU all to no avail. Any ideas would be greatly appreciated.

Thanks for the response Dale. Unfortunately the computer I am putting into Target Disk Mode (The G4 1.25Dual) definitely has an ATA bus. I use target disk mode with other computers in the studio almost daily so was somewhat surprised to see that this one just shuts down instead. I am still hoping someone might have some insight.

System shutting down when using slide show mode in Microsoft power point

Microsoft Power Point shutting down while clicking slide show on MacBook Air, version mid 2012. Help solicited in resolving this!

Hi,
Windows unexpected reboot might also be caused by BSOD, here is a blog talking about that:
Blue Screen of Death (BSOD)
Please follow the instructions to collect the dump files if we found any, then upload them into onedrive and post the link here.
Also a blog talking about crash dump files:
Understanding Crash Dump Files
Please take a look in the application log to see if any unexpected stop events.
Best regards
Michael Shao
TechNet Community Support

Imovie shuts down when adding transition to clip

I have imovie 6.0.3 and have been having problems bringing down a transition to the picture clips. When I drag it to the clip, the imovie shuts down and throws the transition into the trash.

Hi Sue,
recently. I also got the same problem abt iMovie HD and while searching the discussions, I have seen your suggestion for similar problem.. I followed it and now it is working very well.
Thank You..
I have another problem in my mac. There is a white vertical line showing up on the desktop for a while.. and recently another white line parallel to it also created and now I have 4 vertical lines on desktop which spoils the beauty of the mac. Do you know how to get rid of them? Mine is iMac, 10.4.9, 1.83GHz, Intel core Duo, 1GB memory.
Your suggestion will be greatly appreciated. My e-mail ID is [email protected]
Thank You
Murthy
iMac4, 1 Mac OS X (10.4.7) Intel Core Duo
iMac4, 1 Mac OS X (10.4.7) Intel Core Duo
Welcome to discussions, viewfinder:)
Be certain to follow Bengt's good advice:
Quit iMovie.
Locate a file named com.apple.iMovie.plist and get
rid of it. iMovie will create a new one the next
time it runs. Empty the trash and run a permissions
repair from the Disk Utility folder.
The files are located here:
-->/Users/YourName**/Library/Preferences/com.apple.iM
vie.plist
Also, please answer regarding the amount of free
space you have left on the Mac.
:)Sue
iMac4, 1 Mac OS X (10.4.7) Intel Core Duo

PSE 10 system slows down when adding files to catalog

I recently switched from PSE 3 to PSE10 and had issues converting the catalog. I never did resolve those so I decided to start with creating a new catalog in PSE 10. My first session of adding photos worked fine. When I restarted the task the next day, I was asked in participating in making the product better by sharing information about my use with Adobe. I agreed to participate and very quickly noticed that my computer slowed considerably when adding photos from my hard drive. The process still worked but I experienced a dramatic increase in the time it took for photos to be added (e.g. the cursor spins for a couple of minutes while the task is working). I went under my account preferences and opted out of the product participation program but the problem has persisted. I rebooted the computer to see if that would help but it has not. I have turned off all media analysis and both optimized and repaired my catalog and while this has provided some improvement, there are still instances where the system slows down. Now it seems that every other folder's worth of pictures (does not matter how many photos) I add causes this delay.
I appreciate any help anyone can provide in determining why this slow down keeps occuring.
FYI, I am running a new Windows 7, 64-bit system with 8GB DDR-3-1066MHz, and 2 TB hard drive.

Have you also edited the Preferences (Performance) to increase the amount of RAM that PSE can use?
Do you have many background processes running? Having a single HDD means that everything running on your computer has to wait in the queue for disk access.
How many photos are you importing?
What file types are the photos?
How large are the photos?
Ken

Imessage shutting down when adding picture

Hi Everyone,
Both of my new iPhone 6 plus have this same problem when going into the messanger app. When you click the camera button to add a picture to a message, the space on iOS 8 where it normally shows the most recent couple of pictures is blank, none of the buttons respond, and finally the app crashes. I've tried different combinations of resetting network settings, restarted, turning iMessage on and off. Upgraded to 8.0.2. The feature worked fine out of the box.
Thanks Tim

Hello, TaylorHeal-
I understand the frustration this is causing is not fun for you. I want to help and will continue to research this for you, I just have a few questions. What software version is on the Charge? Go to Settings> About Phone>Baseband to view this. Are you able to use third party camera applications from the Google Play store withour failure? Do you get any alerts or error messages when using the built-in camera app? Or is it just shutting down the phone immediately? If you have not already, enable safe mode (http://bit.ly/n2EIBZ) on the phone and try to camera to see if it continues to crash.
Keep me posted
Thank you!
AdamE_VZW
Follow us on Twitter @VZWSupport

Premiere elements crashing when adding disc menu on a mac

This has been happening for quite some time now.
I have tried saving as flv and mpg to avoid the problem but it still crashes.
Is there a solution. I am running OSX 10.9.2
I have verified the disk and permissions to no avail.
I have a project that I need to finish.

Thank you for your response
What exactly is happening and when?
When I have finished editing the movie and ready to add a disc menu so that it can be played on DVD. Disc Menu is selected and when I try to drag it across the error occurs and it shuts down the program
Movie Menus only apply if you are creating a DVD, a BluRay or a WebDVD. Why are you outputting as an MPEG and FLV? I output as an MPEG and FLV to add to the internet and to keep as files for future use.
What model of camcorder is your original footage coming from and what format and resolution is it? I am importing an mov file which I have made a slideshow from in Slideshow Pro. I have been using the same process for over a year and it has only started happening in about 4 months ago.
When you add your video to your timeline in Timeline mode, do you see a red line alone the top of the timeline, above the clips? This indicates that you did not properly set up your project to match your video. No red line
What are your Project Properties, as listed under the Edit menu?
It might also help to know the hardware specs of your computer.
MacBook Pro -
Processor 2.9 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 1024 MB
Software OS X 10.9.2 (13C64)

System shuts down when grey screen and grey Apple logo appear

My system (G4 desktop from 2000) is old enough to not support 500 GB HD's natively. So I bought a Tempo controller card that fits into a PCI slot and have used it successfully with Tiger for the past 2 years. I upgraded to Leopard and found that I can no longer boot from my primary HD. My system does have a very small HD connected to the original controller card and Leopard was installed on it just to see what would happen. The computer boots normal. But this small drive is useless since all of my data, pictures, videos are on the 500 GB drive. My accounts are on the same drive. I need to find a way to successfully boot from the 500 GB drive or be able to log on from the smaller drive but use my accounts on the 500 Gb drive.

There is a firmware upgrade for most Sonnet Tempo cards on their website. If there's firmware for your card, you'll need to boot from 10.4 (or from some other drive with just about any Mac OS X), and install the update. The installer pkg is fairly self explanatory. I would unplug those drives from the card during the update. You need to be using firmware version 2.1.2 if you have a SATA controller (use System Profiler to check after the update). Here's the link:
Link:[http://www.sonnettech.com/support/downloads/computercards.html]
Then use disk utility to setup those drives. You could do this from 10.4 or from 10.5 (or from the 10.5 installer disk).
If all checks out, restart or re-install 10.5 and the drives should be there.
I'm assuming you have some other drive you can boot from. It could be an old IDE drive, or even a firewire drive. If not, now's a good time to make one. It's a good idea to keep something around as a spare boot drive for emergencies (like this). I keep an old IDE drive with several bootable partitions - this drive is usually unplugged. I use disk utility (from the installer CD) to "restore" a working OS onto one of the partitions - it makes a perfect copy.
Good luck

System shutting down when converting files

Downloaded 7.5.0.20 and when I try to convert files into Ipod format from existing WMA my PC goes into uncommanded reboot. Not linked to any other applications that I can see and happens too frequently to be anything else. (Running latest AVG antivirus V7.5.516
Have NEVER had this problem before, and have 23Gb of files in Windows Media Player.
Anyone have any thoughts on what might be conflicting or causing the issue?

Found the problem lay with hardware not software - actually overheating the PC as the chip heatsink was clogged with dust. Strange that nothing else had caused reboot but then again life can be strange.....

Update mac to maverick system shuts down when adding disc menu

Similar Messages

Maybe you are looking for