Update manager in IdM automatically when the manager changes in SAP HR

Hi Experts
I have been given a requirement where the manager of a user in IdM should be updated automatically when the manager changes in SAP HR.
The HR extraction job is currently in place and runs every 30mins.
Please could you give me some ideas on how to implement this.
IDM 7.2 SP 6
Thanks
Ran

Hi Deepak
I have been discussing this a bit more in detail with the client. So, the issue is as follows
When a new/replacement manager is hired
When people are moved from one org unit to another
The scheduled extraction job (RPLDAP_EXTRACT_IDM with a variant with the delta tick on) does not update the new manager info in IDM for the relevant users who report to that manager. The client has to run the program (RPLDAP_EXTRACT_IDM with a variant with the delta tick off) manually each time for the affected users which updates the manager info successfully in idm.
I investigated the query LDAP_IDM_QUERY from user group /SAPQUERY/L1 and want to know if the below should be ticked as well. Your thoughts please?
Please advise.
Thanks
Ranjit

Similar Messages

Deployment of Web Application when the managed Server is down .....

Part of our installation, we want to deploy our web application on to a managed server.
So, we use the JMX API calls to deploy the web application. But, at the time of this deployment the managed server is not brought up. So, our expectation was that when the managed server is brought up later, it will automatically STAGE the web application from Admin Server and then, deploy it in the managed server.
But, what is happending is that the web application is not being deployed to the managed server (even though the web application is configured to be deployed in the specified managed server in the config.xml and it is set as the default application of the managed server application).
We are using WebLogic 7.0 SP2 on RedHat Linux 7.2.
Can anyone help to deploy web application on to a managed server when the managed server is down ?
Thanks,
Selva-
[att1.html]

This is currently being fixed in 7.0 line, contact [email protected] and reference
CR110687
Cheers
mbg
"Selvamohan Neethiraj" <[email protected]> wrote in message news:[email protected]..
Part of our installation, we want to deploy our web application on to a managed server.
So, we use the JMX API calls to deploy the web application. But, at the time of this deployment the managed server is not brought up. So, our expectation was that when the managed server is brought up later, it will automatically STAGE the web application from Admin Server and then, deploy it in the managed server.
But, what is happending is that the web application is not being deployed to the managed server (even though the web application is configured to be deployed in the specified managed server in the config.xml and it is set as the default application of the managed server application).
We are using WebLogic 7.0 SP2 on RedHat Linux 7.2.
Can anyone help to deploy web application on to a managed server when the managed server is down ?
Thanks,
Selva-
[att1.html]

I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes. Any ideas?

I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes. Any ideas? I am on Windows 8.1 and my iPod is a Classic

Hi murr18140,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
I hope this information helps ....
- Judy

Bluetooth no longer loads automatically when the computer starts

I have the Bluetooth Stack version 2.01.21.1. It was working fine. When the laptop booted up, the bluetooth mouse was automatically connected.
All of a sudden the icon no longer appears automatically in the system tray and so I have to manually connect the mouse each time
It is still listed in the startup menu on the desktop and it is still checked in startup in the msconfig.
How do I fix this?
Thanks in advance

I have just gotten off the phone with a microsoft tech who actually seems to have fixed this somewhat
He went to start/run to get to services.msc.
He chose "SSDP Discovery Services" which "enables discovery of
UPnP devices on your home network" and DISABLED it.
Go figure
The BT icon now appears in my system tray and starts up automatically when the computer starts.
I say somewhat because It still disconnects if left idle for a long period, which it did not do previously, but at least it is there when I log on.
I want to mention that I have a Dell, not a Toshiba (did not realize this forum was for Toshiba laptops rather than Toshiba software) but perhaps
you will find this information useful.
Also, at http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx you will find an autorun tool that lets you fix what is or is not
in the startup menus. It seems to work better than using msconfig which on my laptop was not making a difference as to what started up and what did not.
It is meant for IT professionals so I would not mess with it too much. However if you just check or uncheck in the startups for the BT manager you will
not do any damage.

How do I close a PDF document automatically when the browser is closed?

I have a web app writen in HTML/ASP. In order to acccess this app, our users have to enter a password and user id. Once on the main page of the app, they can click on a link which opens the reader in another window. Quite often, when finished with the app, they close the browser, but leave the reader window open (with sensitive information). It is becoming to riskly to hope that they remember to close that window also, even with visual reminders. I would like for that window to close automatically when the browser with the app is closed.
Can this be done?

Let me elaborate a little more on what I am trying to do.
(1) A website (#1) is opened after entering a UID and PWD.
(2) Within website #1, a link is clicked which opens a second web app (#2) in a seperate window using window.open().
(3) Within website #2, a user can click on a link which opens a PDF as _SELF.
(4) If the user:
(a) exits out of website #1 by closing the brower
(b) we would like to automatically close the PDF from website #2 also, as this contains sensitive information and most of the time the users are forgetting to close it

CRS process does not startup automatically when the system is rebooted

Hi. all.
SOME TIMES(not always), CRS process ( exactly OracleCRService on
windows2003) does not startup automatically when the windows2003 is
rebooted.
O/S is windows2003 server.
DB is 10.2.0.2.0 RAC database that has 2 nodes.
I am testing a RAC database configuration, and thus rebooting one node
intentionally by turn.
I have tested about 20 times, and 17 times is OK. All required process is up
and all instance is up.
However, 3 times, OracleCRService services does not start, and concequently
database instance does not start automatically.
Here is the log of "crsd.log" file on the active node.
2007-05-31 17:43:13.281: [ CRSEVT][1720]32Processing RecoveryDone
2007-05-31 17:46:51.968: [ CRSRES][3876]32StopResource: setting CLI values
2007-05-31 17:46:52.437: [ OCRMAS][2368]th_rcfg_con: pudata retval [12]. Member [2] might have gone down
2007-05-31 17:46:52.437: [ OCRMAS][2368]proath_master: Node [2] came up/down 1/0 [1]. Problem retrieving pubdata. Should get down reconfig soon
2007-05-31 17:48:26.890: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.000: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.109: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.218: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.328: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.437: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.546: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.656: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.750: [ COMMCRS][2668]clsc_send_msg: (028BA8A0) NS err (12571, 12560), transport (533, 57, 0)
2007-05-31 17:48:27.750: [ CRSCOMM][2852]32CLSC connect failed tonmsp109ret = 9
2007-05-31 17:48:27.859: [ CRSEVT][2852]32invokepeer ret 200
2007-05-31 17:48:27.859: [ CRSRES][2852]32Remote start never sent to nmsp109: X_E2E_NotSent : Failed to connect to node: nmsp109
(File: caa_CmdRTI.cpp, line: 492
2007-05-31 17:48:27.859: [ CRSRES][2852][ALERT]32Remote start for `ora.nmsp109.gsd` failed on member `nmsp109`
Is there anyone who can help me?
Thanks in advance.
Best Regards.
Message was edited by:
user507290

oops- wrong forum!
Please try the RAC forum.

Sales Order Updation when the delivery changed

Hello Experts,
                       I am working an object where I need to update the sales order when the delivery changed.
                         Actually when the remote system rejected the delivery an IDOC will come to R/3
Sooner the delivery changed in R/3 I need to update few fields in sales order.
          When I am trying to code in the exit in the FM attached to the IDOC it is first updating the sales order and calling ws_update_delivery next.
Even if I am trying in mv45afz1 also same thing is happening.
          Can anyone let me know how to solve this problem.

Hi,
you can see the work center capacity situation for manufacturing an item in the salesorder. But it needs Assemble to Order strategy. Anyway u can see the material details in the sales order.
Kiran.

BlackBerry z10 switching off automatically when the battery is less tha k 50% and opening when connecting to a charger

BlackBerry z10 is switching off automatically when the battery is between 40 to 50%. And opens when I connect the charger.
First it gives a logo of a red sign. And the light. Then after few red light it opens. Pleaseee help.

I had the same problem, it happened as soon as I got my phone so Telus replaced it under the 30 replacement policy. If past 30 days they repair it.
Have it repaired or replaced.

Update of XML syndication map when XSD is changed

All,
So we recently upgraded to MDM 7.1 SP 06 and found a new feature which we were waiting for quiet some time. Thought i'll share with the community as well.
Update of XML syndication map when XSD is changed in Console
In earlier SP's of MDM, if we had to update an XML syndication map, we had to upload the new XSD in Console, go to syndicator and basically re-create the whole map. there was no way for syndicator to preserve the old mapping.
Well with this new feature, the old mapping is preserved, we only need to re-map the new fields.
The process is as below:
1. Upload the new XSD in Console.
2. Go to syndicator and open the syndication map which you want to update(File->Open).
3. Click File -> Update XML Schema. (this is the new option)
4. It will give a pop-up, select the new schema you have uploaded in console and hit OK.
5. You will get a prompt saying that syndication map is being changed, hit OK.
6. Now you will see the new XSD in syndicator, the older fields are still mapped, you only need to map the new fields.
It a nice feature which will definitely save lot of time. Thanks SAP
Regards
Aamir

If this post answered your question or helped, please mark it as such.
This works.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
    <![CDATA[
      import mx.events.DataGridEvent;
      import mx.collections.ArrayCollection;
      [Bindable] private var ac:ArrayCollection = new ArrayCollection([
        {bgColor: "0xFF0000", num: 100, name: "Test1"},
        {bgColor: "0xFF0000", num: 200, name: "Test2"},
        {bgColor: "0xFF0000", num: 300, name: "Test3"},
      private function changeBK(evt:DataGridEvent):void{
        var row:uint = evt.rowIndex;
        var data:Object = ac.getItemAt(row);
        data.bgColor = "0x00FF00";
    ]]>
</mx:Script>
<mx:DataGrid id="dg" dataProvider="{ac}" itemEditEnd="changeBK(event);"
    editable="true">
    <mx:columns>
      <mx:DataGridColumn dataField="num">
        <mx:itemRenderer>
          <mx:Component>
            <mx:TextArea backgroundColor="{data.bgColor}" text="{data.num}"/>
          </mx:Component>
        </mx:itemRenderer>
      </mx:DataGridColumn>
      <mx:DataGridColumn dataField="name"/>
    </mx:columns>
</mx:DataGrid>
</mx:Application>

[svn:fx-trunk] 11112: DatGroup and SkinnableDataContainer dispatch a " dataProviderChanged" event when the dataProvder changes.

Revision: 11112
Author:   [email protected]
Date:     2009-10-23 12:35:31 -0700 (Fri, 23 Oct 2009)
Log Message:
DatGroup and SkinnableDataContainer dispatch a "dataProviderChanged" event when the dataProvder changes. Fixed a ScrollerLayout typo.
QE notes:
Doc notes: none
Bugs: sdk-23489
Reviewer: Ryan
Tests run: DataGroup
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-23489
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DataGroup.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/SkinnableDataContainer.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/ScrollerLayo ut.as

When the state change, my StyleableTextField html formatting is lost

Hello,
When the state change, my StyleableTextField html formatting is lost (mobile project)
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
          xmlns:s="library://ns.adobe.com/flex/spark"
          addedToStage="ats(event)">
          <fx:Script>
                    <![CDATA[
                    import spark.components.supportClasses.StyleableTextField;
                    protected function ats(event:Event):void
                              StyleableTextField(txt.textDisplay).htmlText="<i>test</i>";
                    public function ok(e:Event):void{
                              currentState = "state2";
                    ]]>
          </fx:Script>
          <s:states>
                    <s:State name="initialState" />
                    <s:State name="state2" />
          </s:states>
          <s:VGroup>
                    <s:TextArea width="100%" id="txt" includeIn="initialState, state2" skinClass="spark.skins.mobile.TextAreaSkin"/>
                    <s:Button label="add" click="ok(event);" includeIn="initialState, state2"/>
                    <s:TextArea width="100%" text="state2" includeIn="state2"/>
          </s:VGroup>
</s:Application>
Thanks

How are you doing this?
The text area of a web app has HTML encoding and is all fine.
If you make a multiline custom text field the encoding remains.
You need to provide a bit more information because the above do keep their encoding.

How to catch an event when the user change values in the project information dialog

hi,
i would like to know how to catch an event in my C# code when the user change values in the project information dialog?
taskChange doesn't catch these changes.
thanks.
Thanks, Sharon.

You need to write save button event handler for project information dialog. Link is having same functionality described.
http://blogs.msdn.com/b/husainzgh/archive/2011/08/01/hooking-into-the-project-detail-page-ribbon-save-button-without-overriding-out-of-box-functionality-in-project-web-access-for-project-server-2010.aspx
http://www.projectserver2010blog.com/2010/01/sharepoint-2010-webpart-client-server.html
kirtesh

How to deal with the situation when the database change into ms-sqlserver ?

Hi,dear all,
How to deal with the situation when the database change into ms-sqlserver or other database?
Now, i want to build a j2ee project with ORACLE ADF bc,but this project may be used in several diffrent databases for example oracle db,ms db,mysql and so on.however,if i have developer this project in jdeveloper and this project connection was config as a oracle database,and then,can this project be reused for other databases espasially including the model codes? if yes,how should i do?
all who know how to resolve this,tell me pls,thanks.
bruce Li,
China
Message was edited by:
user526724

Hi Paulbin,
Do you want to supply a function-pointer to a DLL so it can call[back] your VI? Here's how it can be done with .NET, though, that solution requires a C compiler. A single "VI_to_function-reference" utility could handle all cases where the callback passes no parameters. Maybe someday somebody will share that dll.
Did you know that LabVIEW can use Events for some COM-signals change? See pic. (Note: DTR is not listed - - )
Another question is another function's prototype is WORD SetTestType(WORD comHandle, bool type1, bool type2, bool type3), I tried to use a boolean control and a Boolean to (0,1) node in labVIEW to pass parameters to CLF, I config the bool input value as U8(according to C++ bool type) and U32(according to WIN32 BOOL type), it dose not help, when I execute the VI, LabVIEW will be disappeare, it seems to be closed, I must start it again.
Could someone has similar experience on this points?
It's easy to crash LabVIEW misusing CLF - maybe there's another reason for the crash besides bool mis-match(?) Do you know which "Calling convention" is required? What type is comHandle? (where does comHandle come from?)
Cheers!
Message Edited by tbd on 03-23-2007 09:34 PM
Message Edited by tbd on 03-23-2007 09:35 PM
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
evt.jpg ‏7 KB

The Sound stop when the movie change

Hello,
I am doing a Director movie that calls another movie.
How can I do to the sound do not stop when the movie
change?

Chrome has its own Flash Player plugin called "PepperFlash". It functions independently of the ActiveX plugin for IE. ActiveX causes more problems for IE than it will ever solve... and for that reason, I don't use Microsoft's pathetic excuse for a browser. It's pure garbage.
I recommend using any other browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

[SOLVED] - Thunderbird constantly crashing, especially when using Add Ons Manager, but sometimes just when the program has been sitting open.

Hello,
I was using Thunderbird earlier today when the power went out in my neighborhood. Since the power has been restored Thunderbird has been crashing early and often. I can't get the program to open unless I rename or delete the "extensions" folder in ~\Library\Thunderbird\Profiles\<Profile Name>
It will crash immediately if I go to Tools--> Addons. Eventually it will just crash from just sitting open in the background. I've attached the crash report below. I'm on OSX 10.10.1
I've tried deleting and reinstalling Thunderbird (both the current and previous version)
I've tried repairing permissions
I've tried using Time Machine to restore the entire Profiles folder from before the power outage.
Any suggestions? I've been using Thunderbird for years and I'm quite comfortable with it, but might have to switch to Postbox if I can't fix this.
Thanks.
AdapterDeviceID: 0x6720
AdapterVendorID: 0x1002
Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:31.3.0
BuildID: 20141127140543
CrashTime: 1419384832
EMCheckCompatibility: true
EventLoopNestingLevel: 1
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1419372200
Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x6720GL Layers! GL Context? GL Context+ GL Layers+
ProductID: {3550f703-e582-4d05-9a08-453d09bdfdc6}
ProductName: Thunderbird
ReleaseChannel: release
SecondsSinceLastCrash: 22
StartupTime: 1419384814
Theme: classic/1.0
Throttleable: 1
Vendor:
Version: 31.3.0
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed.

That did it, thank you!
It was located in ~/Users/<username>/Library/Internet Plug-Ins

Update manager in IdM automatically when the manager changes in SAP HR

Similar Messages

Maybe you are looking for