Update maps data

Good day. Will this year's update maps? If yes, when? It also explained that the maps provided by Navteq. Navteq has been doing since August 2010 appears Slovenian motorway A4. It is so sad that in January 2011 still do not see the highway Ovi maps.

But here's the A4 motorway displayed - it is Navteq.
Ovi has highway maps :-( So I still go to Navteq?
Attachments:
maribor.jpg ‏33 KB

Similar Messages

  • How to update maps....

    Maps Updater hasn't worked for a while.
    So I had to install OVI Suite (whole suite just to update maps, space waste :-)
    But still can't find how I update my maps :-(
    I can see available maps, and installed maps.
    But I find nowhere to check for latest version and update.
    All I find is like the old "map loader".
    But I don't find the "maps updater" stuff :-(
    Lars-Erik Østerud - http://www.osterud.name/nokia.html

    LarsErik: Maps Updater hasn't worked for a while.
    So I had to install OVI Suite (whole suite just to update maps, space waste :-)
    But still can't find how I update my maps :-(
    MapsUpdater has stopped working. It was for updating the OVImaps application programme. The programme to update map data of various countries was Nokia Map Loader. Even that is not supported (or available) any more, but the old programme still works if you have it.
    OVI Suite can do both: update OVImaps programme and update map data.
    Markus
    PS I still prefer Map Loader to OVI Suite. Map Loader is smaller and you can load a whole continent (like Europe) at once. With Ovi Suite you have to load all countries separately.
    (Lumia 820, 8.0.10328.78, 3047.0000.1328.0003, Here Drive+ 3.0.4121.0, map 8.30.51.121)

  • If I update from ios 5.0.1 to 5.1.1 will I lose my map data? When I updated to 5.0 I lost all my GPSHD Motion X data - 25 Gbytes.

    If I update from IOS 5.0.1 to 5.1.1 will I lose all my GPSHD Motion X map data? When I updated to IOS 5.0.1 I lost about 25GBytes of map data because Itunes will not back up my GPSHD map data.

    I havn't used that app, but you shouldn't lose any data by updating to 5.1.1 from 5.0.1.
    You can make sure you have a backup before updating.
    If you run into problem with that app only or want to ask the app developers, check out the Motion X-Support site.

  • Any official word on Maps data update for Symbian?

    Hello,
    if anyone else still is using Symbian phone...
    The wonders of the world are not over..
    I'm just updating new maps to my Nokia 808 with Nokia Suite 3.8.54.
    1/3 done and loading, will give later more comments as the full update is done...
    BR jeeveeas

    jeeveeas wrote: After little driving, I can see that the maps data is still little old. I'd estimete it's nearly 1 year old, maybe early summer 2014 (as my area was build some new motorways and part of it is already in data but not all).
    Confirmation HERE in Message 3

  • Most recent Maps data update wastes disk space

    I noticed that used disk space on my N9 increased by 2GB and found that I now had these folders under cities: diskcache, diskcache_, MapLoader, and MapLoader_.  I recently updated my maps and evidently the old diskcache and MapLoader folders were renamed with underscores and new ones were created, so I now have 2GB worth of the old Maps data and 2GB worth of the newest Maps data.  This didn't happen after previous updates.  I assume it should be safe to delete the diskcache_ and MapLoader_ folders.  Has anyone else noticed this?

    As far as I know, there is even a section
    HERE! Location-based services from Nokia: Maps, Navigation and GPS
    There's not much effort needed to find tones of threads for WP and almost none for Symbian.
    There are even official video stickers of HERE Maps working on Lumia phones.
    So I presume that yes, everybody is discussing HERE services round here. Why not do that for Symbian?
    Besides, Nokia has made a commitment to provide lifetime voice-guided nav for Symbian devices. Without updates, the navigation is useless. If Lumia based phones are getting updates, I see no reason for us not getting them. I don't care who owns HERE (which is still Nokia, BTW). I purchased a Nokia phone.
    I should definitely claim for it HERE.

  • Ovi maps data update through Ovi Suite A bug?

    Don't know if its a problem but the darn Ovi suite keeps prompting to update the maps data in my N97 mini even I have already done it twice. Seems like it just read and check my phone maps data and just erase everything and download all the data over again. Doesn't seems to be optimized. Should have program the updater check the data files size or date tag and just update those outdated files, instead of everything.  If I have a huge maps data in my phone it'll be a loooong wait.
    Anyone having the same problem?
    I'm still getting prompt today to update my maps data. Doubt that nokia tech can update their maps data that fast.

    iwant gps data

  • List View Bound to XML Map Data

    HI Have a list view that is bound to xml mapped data.  It seems that on connection refresh that new data is not being updated into the SWF.  My Binding is directly onto the cell ranges that are mapped into excel, so on updates the size of the maped table changes/rewrites over the old data.
    When I refresh I am not picking up the newest data in the list view.  Any thoughts on this on how I can fix.
    Regards,
    Mark

    Thank you Ganesh, but I am not on Enterprise edition.  I am successfully bringing in live xml data, however mapping more than one Query result from one xml file is giving my project some problems.  Refreshing a list View I think is causing this issue.  From within my project in design view I can Refresh the data.
    When I publish the file to html/SWF when I refresh other components are refreshing but the list view and one other is not refreshing.....

  • Automatic remote key updation in data manager after a data import.

    Hi experts,
    I'm using SAP MDM 7.1 SP10 and after I do a data load via import manager my remote keys of lookup tables are updated. For example, lets just say I do a vendor mass load for some operating company for which I didn't maintain remote key for lookup table "Country" (figure Before load) and after the load its autometically updated in data mager (figure After load).
    Before load.
    After load.
    I want to understand if its noramal SAP behaviour or not. If yes, how can i avoid this.
    Thanks and regards
    Shamit Prakash

    Hello Ravi, I just want to leverage Shamit question :
    I noticed the same behavior after the key mapping enable and the problem is : every time I import a file via Import manager now, when I check my mapping, sometimes a supplier that does not exist in my file is mapped with a different one from MDM. Previously the key mapping property was enabled, if this situation occurs  in my import, as the supplier is a key in my map, this field would not be mapped and I had to correct my file or include this supplier in the database. Now, this became dangerous, as my import can map wrong information. Do i have another option to syndicate only changed records, without enable the key mapping ??? Example : use the selection Criteria in syndicator.

  • Maploader mac v1.1 crashes when updating maps on t...

    Hi,
    when I try to update maps on my nokia c5 via maploader mac v1.1 i get the following crash ( see end of message)
    I already removed the maploader and associated nokia multimedia transfer app completely (including com-files aso) and reinstalled them -> no improvement
    also a hardreset on my phone did not resolve the problem.
    Do you guys have an idea what could solve that problem?
    Process:         Nokia Map Loader [1480]
    Path:            /Users/kay/Desktop/Nokia Map Loader.app/Contents/MacOS/Nokia Map Loader
    Identifier:      com.nokia.MapLoader
    Version:         1.1 (904M)
    Code Type:       X86 (Native)
    Parent Process:  launchd [110]
    Date/Time:       2010-12-23 17:41:13.347 +0100
    OS Version:      Mac OS X 10.6.5 (10H574)
    Report Version:  6
    Interval Since Last Report:          5538 sec
    Crashes Since Last Report:           7
    Per-App Interval Since Last Report:  657 sec
    Per-App Crashes Since Last Report:   7
    Anonymous UUID:                      6CE7D6AF-BE18-4E0D-8740-7AEE46352526
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Application Specific Information:
    Assertion failed: (package.size( ) > 0), function get_mapsapp_update_info, file /Users/ststein/workspace/MapLoader/MapLoader/maploader_1_1_827/trunk/MapTransfer/../msapi/phone.cpp, line 280.

    I'm getting the same crash as clevrusr with the same data in the crash log.
    I thought this part from clevrusr's (and my) crash log looked curious:
    Assertion failed: (package.size( ) > 0), function get_mapsapp_update_info, file /Users/ststein/workspace/MapLoader/MapLoader/maploader_1_1_827/trunk/MapTransfer/../msapi/phone.cp
    Did a Nokia programmer ("ststein") accidentally hardcode his home path into the Mac map loader app?

  • Update mapping of a node

    I have a few nodes in my component which correspond to some of the function modules. These function are meant for reading data from a table and saving data into it.
    My mappings are working perfectly. But now i need to add another field to the concerned database table. Thus, these nodes need to be updated. Is it possible that i update the mappings for these nodes without creating the service calls all over again.
    Also note that the node for the function module that fetches data is bound to an alv grid?
    The 'create attribute' and 'update mapping' options are disabled for this node in the component controller.
    Is it possible to update mappings without doing too much of rework?
    regards,
    Priyank
    Message was edited by:
            Priyank Jain

    Hi Priyank.
    The nodes of my service calls are enabled for editing in the component controller. I can add atrributes. Make sure you are in edit mode. Then you can add the field to the corresponding node.
    After that you can update the mapping in corresponding views if necessary.
    Cheers,
    Sascha

  • Can I edit/select from downloaded map data  to reload onto an SD card ?

    I have been directed to a place where I can download a 2009 updated map for my satnav.
    The download is quite big, some 2.5 GB as it covers Europe.
    All I want are the UK maps. I don't know if this is a silly question or not but if I download the full thing onto the macbook then is it at all possible to delete the non-uk maps or just to choose the UK maps to download onto an SD card ? Can I sort of get into the downloaded data to do this ? I would like to have UK only on the SD card.
    Sorry for the rather vague way of putting the question but it's the best I can do to describe it !
    Cheers
    4jbl7

    Drive Preparation for Lion
    1.  Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select the SD card drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. After formatting is done quit DU and return to the main menu. Select Reinstall Lion and click on the Continue button. Be sure to point the installer at the SD card drive as the Destination target.
    Note: Your model must be able to boot from an SD card. Not all can as I recall.

  • Lost Maps data in Memory Card

    I recently formatted my phone and memory card and lost the nokia maps data from the card.
    while updating with nokia suit it says "can't find maps on phone". what can i do for getting back the data ? 
    @fthab
    Attachments:
    maps.jpg ‏131 KB

    helloafthab wrote:
    What can i do for getting back the data ? 
    Open Ovi Maps application upon device and perhaps download a few kb's of map data for your current position, then close application and re-try.
    Happy to have helped forum with a Support Ratio = 42.5

  • How to update DSO data in Data targets (ODS data into Data Targets)

    Hi,
    In 3.5 version we have a option <b>Update ODS data in Data Targets</b>
    to Transfer Data From ODS to Info cube.
    In 7.0 How to transfer DataStore Object data to Info Cube, I can't find
    Update DSO data in Data Target option.
    can any body Help me to solve this problem.
    Thanks
    prasanna

    Hi prassna,
    0RECORDMODE are auto generated infoobjects which are requried to be mapped if you are going for a delta update  from your DSO otherwise you can proceed further without mapping the 0RECORDMODE and neglect the system generated warning
    check this for the <b>Creation of data targets</b>
    •     In left panel select info provider
    •     Select created info area and right click to create ODS( Data store object ) or Cube.
    •     Specify name fro the ODS or cube and click create
    •     From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
    •     Click Activate.
    •     Right click on ODS or Cube and select create transformation.
    •     In source of transformation , select object type( data  source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
    •     Activate created transformation
    •     Create Data transfer process (DTP) by right clicking the master data attributes
    •     In extraction tab specify extraction mode ( full)
    •     In update tab specify error handling ( request green)
    •     Activate DTP and in execute tab click execute button to load data in data targets.
    cheers
    Sunil

  • The update map does not support "UPDATE"

    Hi,
    I've created a Logical Data Service, but get a warning
    The update map does not support "UPDATE" : One or more update operations do not have update capabilities
    While creating the Physical Services(Oracle 11g), the update methos was not creating; so I create those manually.
    The update does not work, even from the Physcial service( It says Operation Successful) but the data does not change
    Any help is appreciated
    Rgds,
    Is

    Please post your physical data service both before and after you added the update.

  • Direct download of Nokia Maps data

    Hi, 
    I am using Nokia 5235, and Nokia Ovi Suite 2.2.0.241, and when I am trying to update the map, it's making troubles, it erases my phone data but not completely download and updates with new map data, the application is being reset during download.
    So, is there any way to download the map data directly, and place in my mobile?

    There isn't an option to download chunks for map data for example for a whole country directly to the phone. You can allow your phone to download map data on the fly. To do this, you need to set Maps to Online and map data for the surrounding area will be downloaded as you drive along. You could scroll around the map to increase the area downloaded but it will be very tedious if you wanted to download the map data for a whole country.
    The current map download issue is related to the latest version of Ovi Suite. I personally got around this issue by downloading and installing the previous version of Ovi Suite which is V2.1.1.1. That worked fine for me earlier this week.

Maybe you are looking for