Update Master Data from OSD

Hi experts,
I have a problem.
I have a master data (infoobject as cube) with FIELD1 FIELD2 as KEY and some attributes (no text).
I want to update one attribute of this master data from a characteristic of OSD (same key).
The problem is that when I execute the DTP in the transformation RULES, an error appears because the register already exist and it doesnt modify the attribut.
What can i do?
thanks a lot

An Expert Routine

Similar Messages

  • How to Update Master Data from R/3

    Hi,
    In the R/3 source system, there a few new company code. 
    I have run an infopackage to full update Datasource 0COMP_CODE_ATTR. But when I display data, the new company code is not there.
    I also run rsattr, and selected all the infoObject list. But i still can't see the new company code.
    May I know how to extract the new company code from R/3 to BI?
    What are the steps?
    Thank you.

    Hello
    Check if the DTPs ran and the monitor turns green. The monitor in DTP also tells you how many records are processed.
    After that run the Attribute change Run.
    In general the steps to load master data from R/3 are:
    1. Execute InfoPackage
    2. Run DTP
    3. Run Attribute Change Run
    If the company code still does not show check the tables (P & M tables) to see if the data is there and in active version.
    Hope this helps

  • Updating master data from WEB UI

    Hi experts,
    Is it possible to change the partner attributes such as e-mail, box no, phone, etc from CRM WEB UI?
    I am planning to create an admin to where he can change the partner details in WEB UI. My assumption is the master data/attributes of partner cannot be change in CRM except in HR system. what could be posible. what not. Please suggest me the best.
    Thanks
    Chand

    Hi Chand,
    I am not an expert. But will contribute to your question.
    You can use the transaction Launcher concept to tie the transaction of changing the HR Master Data with CRM Web UI. Using this you will be able to call the call the transaction in SAP ECC to change the HR master data from CRM Web UI. Assign this to the required navigation bar profile. This will resolve your issue.
    Thanks,
    Ravi G

  • Update Master Data From SAP R/3

    Hi ,
    Im new for CRM. How to upload the Master data ( Customer , Material ) to CRM.
    Any configuration possible .. pls let me know
    Prakash

    Hi Prakahs,
    You have to do a initial download in order to connect both systems and make data transfer process available.
    You can guide from SAP best practices allocated in:
    <a href="http://help.sap.com/bp_crmv340/CRM_DE/BBLibrary/html/BBLibrary.htm">http://help.sap.com/bp_crmv340/CRM_DE/BBLibrary/html/BBLibrary.htm</a>
    Please follow building blocks C73, B01, C71 y B09 in order to do it.
    Hope this helps
    Regards
    Javier Merino
    Please reward answer if you're satisfied.
    Message was edited by: Javier Merino Vivar

  • Updating master data for time dimensions from front end

    Hi Experts,
    I am sure this must be handled in a very straight forward way. Just want to know the best practice here. We are working on a copy of appset and want to completely revamp the time dimension papers as per client's fiscal year which is april to march every year.
    When we have deleted all the existing memebers from the time dimension master data from BPC front end and replaced with new memebers, the task is getting completed successfully.
    But when I check back in BI for the master data, it has not replaced all the existing members. How best to handle this?
    The transaction data is deleted from all the application cubes. Are there any checks to be performed?
    Thanks,
    Santosh

    Closing the thread as I could not replicate the problem. The problem is resolved.
    Thanks,
    Santosh

  • Issue while loading master data from BI to BPC

    Dear All,
    I am loading master data from BI to BPC using the process chain /CPMB/IMPORT_IOBJ_MASTER. I ran the package and package status was success. But few member ID's which are available in BI are not getting loaded in BPC. Nearly I have 1300 ID's in BI. Out of 1300,only 1270 ID's are loaded in BPC.
    I haven't restrict any ID's using conversion file as well.
    What could be the reason? How can I overcome this and load all member's ID in BPC?
    Thanks & Regards,
    Ramesh.

    Ramesh,
    Whats the write mode you have chosen for the CPMB/IMPORT_IOBJ_MASTER chain ?
    Check if you have the Update mode ..
    Hope this helps...

  • Data Source creation for Master Data from Flat File to BW

    Hi,
    I need to upload Master Data from Flat File. Can anybody tell step by step right from begining of creation of DataSource up to Loading into Master Data InfoObject.
    can any body have Document.
    Regards,
    Chakri.

    Hi,
    This is the procedure.
    1. Create m-data with or without attributes.
    2. Create infosource .
        a) with flexible update
             or
        b) with direct update
    3. Create transfer rules and assign tyhe names of m-data and attribute in "Transfer rules" tab and transfer them to communication structure.
    4. Create the flat-file with same stucture as communication structure.
    5. if chosen direct update then create infopackage and assign the name of flat-file and schedule it.
    6. if chosen flexible update the create update rule with assigning name of the infosource and the schedule it by creating infopackage.
    Hope this helps. If still have prob then let me know.
    Follow this link also.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
    Assign points if helpful.
    Vinod.

  • Unable to extract Customer Master data from MDC

    Hello,
    We creating an MDM-XI-ERP2005 Customer scenario. We want to work with all bussiness scenarios (not customizing scenario).
    First I'm trying to extract Customer Master Data from EP 2005 using MDM_CLNT_EXTR.
    I have created a New Variant which properties are:
    Variant: CUSTOMER_TOTAL
    Description: Send all customer data to MDM
    Extraction Object: CUSTOMER_EXTRACT.
    Target System: PI7.
    But, the display jobs shows the following error: Could not determine recipients for message type MDMRECEIPT. Job cancelled after system exception.
    We need to focus the problem. We have done the following ALE configuration.
    SALE transaction:
    In Basic Settings -> Logical Systems -> Define Logical System we have add the following logical systems:
                  EUS100
                  MDM: Master Data Management
                  PI7: Process Integration 7.0
    WE21:
    Transactional RFC -> PI7, IDOC record types SAP Release 4.x
    RFC destination: SAPSLDAPI
    BD64
    New Model -> PFMC
    Add message type: Model iview: PFMC
                                 Sender: EUS100
                                  Receiver: PI7
                                 Message Type: DEBMDM
    WE20 transaction shows:
    Partner profiles -> Partner Type LS (logical system)
                        PI7: Outbound parmtrs. DEBMDM, SYNCH.
    Any idea will be very helpful,
    Thanks in advance
    Marta.
    Edited by: Marta Sánchez on Jul 9, 2008 12:34 PM

    Sorry because I made a mistake in my previous message. ALE seems to be correctly configured. I'll try to update correctly my current situation:
    In WE02 I can see al IDOCs that I'm trying to send to XI. All them have the IDoc Status = 3 (Data Passed to Port OK) instead of 12 Status Dispatch OK :(. So, It seems an tRFC error.
    SM58 shows me more trails: "Basic type 'DEBMDM06' is unknown"
    before that I have done the following steps at SAP ERP:
        1. WE21: I have created a PI7 port with 700PI70CLNT RFC.
        2. SM59: I have checked successfully 700PI70CLNT RFC connection.
        3. WE20: I have created a PI7 Partner Type LS with the following inbound and outbound parameters: DEBMDM and MDMRECEIPT.
        4. BD64: I have created a Distribution Model with DEBMDM and MDMRECEIPT message types.
    and at SAP PI:
         5.IDX: Port: SAPEUS. Client: 111. RFC Destination: PI7.
         6. technical and business system for sender SAP system(System Landscape Directory)...
    - Maybe some of the previous steps is not correct....
    - Is RFC Destination = PI7 is correct in step #5?
    - Is also necessary to configure more steps in PI system like RFC destinations or Transactional port?
    - I have read that is neccessary to check that the option "transfer idoc immediately" in we20. How?
    Please any idea will be very helpful.......
    Thank you!
    Best regards,
    Marta.

  • How to handle/extract Hierarchies in master data from R3

    Hi Experts!!!
    Iu2019m currently working on HR Implementation project and this is my first project. Implementation is being done in BI 7.0 and ECC 6.0. I have some queries  regarding the extraction of master data from R3 as furnished below.
    1.     By default all the datasources  are in 3.x technology  and Iu2019ve migrated all the datasources with export and successfully performed InfoPackages  and  DTPS  into their respective InfoObjects/Data targets. But when it comes to the masterdata datasources with hierarchies, Iu2019m unable to migrate them as there is no MIGRATE option in the context menu. When I tried to create infopackage, it asked me to create Transfer rules first and perform InfoPackage. Is it mandatory to work in 3.x technology (Transfer rules/ Update rules)  in case of master data hierarchies? In this case how to handle datasources with hierarchies?
    2.     Is it required to have any data staging component  like DSO while extracting master data datasources from SAP R/3  to their respective InfoObjects (Data targets)?? Or can I directly schedule Infopackage and DTP directly into the InfoObject with out any DSOS in between for HR master data??
    Good day!!!

    hello,
    1)
    all DataSource that are created in BI 7.0 are new design, master data attribute, text and transaction DataSource can all be created in the new BI 7.0, but for hierarchy DataSource, it remains as 3.X, if you double click on the Hier DataSource, you will see the title "...Emulated 3.X ...", so the DataSource should be working perfectly fine except it is in "Modified" version, i believe it is just SAP has not or can't a way to upgrade hier DataSource.
    Also,
    RSDS doesnt support hierarchy datasources in BI 7.0. So we cannot use transformations and DTP with hierarchy. So it is very similar to the way we used to load it in 3.x.
    Check below link for step by step procedure to load hierarchy using flat file:
    http://help.sap.com/saphelp_nw04s/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
    2)
    i dont think you need a DSO in between for laoding master data from R/3 to BI IO.
    Reg,
    Dhanya

  • Flexible update master data inconsistencies

    Dear experts,
    I have the following issue with flexible update master data for 0employee.
    0employee is getting loaded from 3 different sources. here is the example below;
    employee  address   phone compcode
    1                germany   123     
    1                denmark                001
    1                UK
    here employee is a key for 0employee what happens to above data after attribute change run.
    can any one let me know what will be final results.  my requirement is i have to get company code at any circumstances. it there a proper sequence of load to be followed in this case. your inputs is highly appreciated with points.
    Cheers,
    VSN

    If 0employee gets data from 3 different sources it will overwrite the existing records when same employee '1' is coming from Germany , Den , UK .. Only the recent record will be availble in MD tables..
    You need to add SOURCESYSTEM as compounding object to 0EMPLOYEE.
    Put constant GE for 0SOURCE SYSTEM in transformations
    constant Den for 0SOURCE SYSTEM in transformations
    constant UK for 0SOURCE SYSTEM in transformations
    when you execute MD
    Source system ...employee address phone compcode
    GE.............................1...................... germany.... 123
    Den.............................1...................... Denmark.... 123
    UK.............................1......................UK .............. 123

  • RDA method to extract MAster Data from R/3

    We need to implement the way to extract the Master Data from R/3 As soon as it available in R/3, but it's not like the new MAster Data is loaded in R/3 every 5 minutes, it's more like 3 o 4 times a month and i thought about RDA method, just wanted to see you opinion on wheather it is a good option for such an infrequent loads to BW
    Does this DAEMON eats a lot of system resources? Pleas if the answer could be provided by someone who actually use RDA, it be great!

    Hi,
    We use RDA for systems where the load is very frequent, but a Process Chain would do the required in your case as the data gets updated only a few times in a month.
    RDA will be occupied in the Background Process, so that would create some problems. And it keeps on chiecking for new data.
    I feel its unnecessary. So, go for Process Chains
    Edited by: Vishal Sanghvi on Sep 16, 2008 12:33 PM

  • Loading hirarchy master data from flat file to BW

    hai,
    i am new to BW Environment, thanks in advance for the Forum.
    while loading hierarchy master data from the flat file to BW, i am getting an error as follow
    WITH AN OPEN SQL SELECT, THE OUT PUT AREA USED TO HOLD THE SELECTED RECORDS MUST BE ATLEAST AS WIDE AS THE DATABASE TABLE FROM WHICH RECORDS ARE BEING READ.
    IN THIS CASE , THE DATABASE TABLE IS 167 BYTES WIDE, BUT THE OUT PUT AREA IS ONLY 141 BYTES WIDE
    pl's any one can help how to solve this problem.
    Thanks in advance to the Forum.
    regards
    Reddy

    Hi,
    This is the procedure.
    1. Create m-data with or without attributes.
    2. Create infosource .
        a) with flexible update
             or
        b) with direct update
    3. Create transfer rules and assign tyhe names of m-data and attribute in "Transfer rules" tab and transfer them to communication structure.
    4. Create the flat-file with same stucture as communication structure.
    5. if chosen direct update then create infopackage and assign the name of flat-file and schedule it.
    6. if chosen flexible update the create update rule with assigning name of the infosource and the schedule it by creating infopackage.
    Hope this helps. If still have prob then let me know.
    Follow this link also.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
    Assign points if helpful.
    Vinod.

  • Upload Master Data from R/3 to BW

    Hi,
        I want to upload master data from R/3 into BW.
    Regds
    Dayakar Reddy.

    Hi
    1 activate 0Material from R3 side this datasource corresponds has the extract.struct. BIW_MARA_S correponding to material master data (what you need)
    2 install 0Material from business content
    3 replicate in BW
    4 assign your datasource 0material_attr to the infosource 0material_Attr if flexible or create an infosource with direct update
    5 activate transfer rules (if flexible)
    6 create update rules from 0material to your infosource (if flexible)
    7 create an Infopackage, launch the job and check the monitor to see if the upload works.
    Regards

  • Extraction of master data from R3 into BW.

    Hello.
    This is my new SAP BI assignment:
    I'm going to use standard SAP InfoOjects (from Business Content) in order to build a new InfoCube (Logistics - MM/SD) with for example standard Characteristics like: 0MATERIAL, 0MATL_GROUP, 0SHIP_TO, 0SOLD_TO, 0SALESORG, 0PROD_HIER, 0CUST_GROUP, 0COMP_CODE... (_Note: NO generic extraction involved_)
    My question is, do I need some extra "Process Chain"  (Tcode: RSPC) in order to bring all these characteristics and all associated master data/texts, attributes and hierarchies from the R/3 ( source system) into BW, or these data will come with a standard extractor into SAP BW? I mean no extra work is needed for  bringing master data from R/3 in to BW?
    Another question, Is there any way to know which Characteristics need an extra "Process Chain"  (Tcode: RSPC) in order to bring associated master data/texts, attributes and hierarchies from the R/3 ( source system) into BW?
    Regards
    ASantos

    Hi ,
    1. In SAP R3 system go to the transaction RSA6, find the application component then select the data Source and view the structure of the data source and  select all the required fields.
    2. As you said no generic data source involve , then create the generic data source using the transaction SBIW, generic data sources have many creation options. view is the simplest.You can create a viewwith all requred fields on the top of different source table fieldsa per your requirement.
    3.Now go to the transaction RSA3 the extractor checker ,give name of your ectractor as input and check this data source.
    4.go to BW system,transaction RSA1, find the source system then replicate the metadata in the corresponding application component.After replication only the structure of the data source is copied not the actual data.
    5. Create InfoPackage, so that the actual data is loaded in the PSA table.
    6. Create transformation between the data source and the corresponding data target (InfoProvider - infoobject, cube, DSO). This is done by mapping the source fields with target fields using the appropriate rule type.If there are some update rules in R3 system then you may need to write some field level routines depend on your requirement.
    7.Create DTP between the source and target, and execte it .It will load actual data into the target.
    8.then more transformation and DTP can be created and executed according to the requirements, like from DSO to cube. Thus the data is available in BW data targets on which query can be generated for reporting.
    I don't think you need any process chain for this .this is manual process but loading DTP and all can be automated via creating process chain .
    For more guidence you an refer this document:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40394d9b-93b9-2d10-9f9a-f13118a4776d?quicklink=index&overridelayout=true
    Hope this will be helpful.
    Regards,
    Jaya

  • Loading master data from two different infosource.

    Hi Experts,
    I would like understand the mechanism behind loading data to masterdata infoobject from two different infosource.
    Ex: I have one master data infoobject called A and it has 4 attributes B C D E.
    now I am loading values for A B and C from INFOSOURCE1
           D and E is getting loaded from INFOSOURCE2.
    could ne one please explanin how this works and how all five values get merged in single record?
    Please help
    Best Regards
    Falgun

    Dear Falgun,
    Component of an InfoSource:
    An InfoSource is always a quantity of InfoObjects that logically belong together and are updated in data targets.
    a. <b>InfoSources with flexible update</b>
    An InfoSource with flexible update can be updated in any data targets (with the exception of hierarchies). Update rules are created for this InfoSource.
    InfoObjects can be used in as many InfoSources and data targets as you like.
    b. <b> InfoSources with direct update</b>
    Using an InfoSource with direct update, master data (characteristics with attributes or texts) for an InfoObject can be written directly (without update rules) to the master data table.
    Visit the following link for more information:
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    Hope this is helpful.
    Regards,
    Naveen.

Maybe you are looking for

  • Branch VAT number in BSEG

    Hi All, The client is running EC sales report(S_ALR_87012400). And that report does not give the Branch customer VAT number updated documents(Credit memos) list .As BSEG table updates only main customer(Head Offfice customer )VAT number. The issue is

  • Username or Password is incorrect when logging into 2008r2 standard RDS sessions host

    Hello there TechNet forums, I recently finished setting up a Windows 2008r2 RDS sessions host.  The licensing server is a Windows Server 2012 server with 5 per user 2012 RDS licenses.  The Windows 2008r2 server is pointed to the 2012 server correctly

  • Can you find which user changed a table from redolog?

    Is it possible to find which database user that changed a tuple in a table from the redologs? Or is the only option to have activated some kind of auditing prior to the change?

  • Approver does not exist

    Hi, I have an issue with Leave Request for Edit/Cancel options:    - if employee cancels/edit leave request (that has been previously created in portal), the application works fine.    - if employee has an absence created directly in backend, when he

  • Email to user getting relayed out?

    We have a customer that, when they send email to any of our users, the server is trying to relay it out and then it comes back in and then out... eventually they get kicked back because it was tried to many times. Why would the email be getting relay