UPDATE MATERIL MASTER

Dear all,
I have material say ABC-1 in X Production Plant and extented this material in Y depot.In production plant this material has routing and bom and in depot it don't have.I have updated material master by CA97 in production plant.Now i want to update material master in Y depot also.Is it possible or not?
Plz let me know as early as possible.
Thanks
KK

Hi KK,
CA97 is to update material master with routing timings.this is something related to transferring Scheduling Results to a Material Master Record.
You cant update using CA97 in depot
In your case as it is a depot,there is no routing or BOM.To update material master you can use MASS(transaction code) transaction with object type BUS1001 (materials-industry) and select related table or fields and update.
Hope it will help ,let me know if you further query
Regards
Girish

Similar Messages

Remote and direct update of master data at the same time

Hello
Is it possible to do remote and direct update of master data at the same time? If yes where it could be used?
Thanks

Hi,
What do you mean by Remote Update ?
regards
Happy Tony

Data load error during updation of master data

Dear all,
While updating the master data from the PSA , the following error is appearing and the load fails.
"The time interval ['20050313'/'20050313'] & (from/to) for the data
records 1 & and 2 & overlaps in characteristic 0EQUIPMENT &."
What could be the reason for this error and how to correct the same.
I am able to understand that the valid from and the valid to date are same. in R/3 whenever a change record is created for the equipment the valid from and the valid to date will be the same as shown below.
Creation of record (for example today) valid from :- 02.06.2008 and valid to 31.12.9999.
Change of record (for example tommorrow) Valid from :- 03.06.2008 and valid to 31.12.9999
In the above case the valid to date of the creation data will automatically change from 31.12.9999 to 03.06.2008.
How could this be solved.
Regards,
M.M

Hi Magesh,
Please look at /BIC/*Equipment table in SE16.
Find the record with a key = ********* and notice what values have Date_from and Date_to fields. The interval they determine, overlap with ur date_to and date_from.
You need to supply correct date_to & date_from values.
thanks
Assign points if this helps
Note: this is a common scenario in time dependendent master data.....it happens because you have two records for the same values of master data and also they have overlapping time interval.....you cannot have two values of master data at the same time.

Using the APD to update material master in CRM

Does anybody know if it is possible to update material master records in CRM from BW using the Analyses Process Designer with target CRM?
I would prefer to know this before creating a custom data target adapter in the CRM SPRO, writing all the required function modules and then finding out that it does not work.
Thanks,
József.

Which direction??
Inbound/Outbound
Inbound : IDOC_INPUT_MATMAS01

10.6.8 update: corrupted master 'iMac.icc' colour settings

Hi –
During the lastest update, the master 'imac.icc' profile has become corrupted during the reboot. Now shows a very 'washed out' and high contrast screen.
Can I download the iMac replacement .icc profile from the support archive ?
– or is there another suggestion (yes – I have tried Expert Calibration – but its not making any difference to screen visibilty)
Kind Regards,
Frazer

I'm having the exact same issue on my new 2011 21" imac. The screen looks very washed out and all of the colors are off.
I also tried using the expert calibration mode but I could not get it back to the pre 10.6.8 settings.
Any help would be greatly appreciated.
Thanks!
Josh

Insert or Update Item Master is too slow

Dear Expert,
I have a problem in add or update Item Master Data. When I click Add/Update, the process saving is too slow (need more than 5 minutes). This condition appear yesterday. In 2 days ago process add/update item master data normal.
But the others transaction like business process, transaction is normal.
I have did shrink database in SQL, but not help.
Does anybody help my problem? how should I do?
Thank you before help me

Hi pak Hendra,
May I know how much is your livedb size now ? If it is still slow after reindexing, you may consider to do these followings suggestions:
1. Increase your server hdd size
2. Increase your server's processor
3. cut off and do new opening balance
Is the problem happened in branch/outlet ? do you use citrix to access the server from branch ? Of course you can reindex the db to solve this issue but it is not the only one solution. You must also concern about the connection.
Rgds,
JimM@sbo_knowledge_village

Problem updating infoobject master data from a dso.

Hi all,
i'm updating the master data of an infoobject from another ods, the two table have the same key.
When i update the infoobject with full repair i get errors about duplicate records and the data load stops, when i delete the request and launch the infopackage again all goes well but it seems it doesn't insert any new record in the master data, what could be the problem?
If you need more info ask me.
Thanks a lot.
Stefano

Hi Sadeesh,
i checked the master data table and it seems it has been updated, i check some order number with recordmode N added today in the dso and the entries were in the infoobject, though i don't know why in the request tab it shows 0 added records.
To be completely sure tomorrow i will check again the number of entries in the 'p' table of the infoobject.
Anyway this is the exact error message i get:
7 duplicate record found. 6478 recordings usedin table /BIC/XZDOCDSO
7 duplicate record found. 6478 recordings usedin table /BIC/PZDOCDSO
After that i run the change run for the IO and when i launch again tha data load it goes well.
Regards
Stefano

FM to update Vendor Master record

Hi,
Is there a Function Module which we can call to update Vendor Master record. Most specifically, I would like to update the Name1 field. The program I am creating will run as a daily job and we do not wish to use BDC. Any help is appreciated. Thanks!

Hi, I found FM vendor_update and have tried passing in I_LFA1 and I_LFB1 to update a particular vendor. It seems to work but I am still exploring what the other parameters are used for. Any tips?

Updating customer master using billing

Hi ,
Let let me tell the business scenario
if you purchase something in supermarket, lifestyle etc
based on the amount u buy (say 2000,3000) they will give u points
say for 2000 - 5 points for 3000 - 10 points
so the first field is card type ie - master card, golden card, silver card etc
second field is card points - no. of points
see in business scenario, say after getting some points at one stage , customer can redeeme the points he got on the whole
ie he can get cash discount based on his points at certain stage
now my 50 points will be redeemed and next time i will have 0 points
now other fields are points redeemed, poiints in balance
now i got this screen working in customer master
data will be updated in ztable
now in billing , we have to write a user exit through which , we can update this points based on the amount of billing
ie updating customer master from billing user exit
can anyone tell what exit i have to use, what logic i have to write , and how to create project and all
Thanks,
Ratna

Hi,
User Exits are nothing but Customizing the SAP Standard prog. with out changing the exiting functionality.
Option, prepared by SAP to extend delivered standard-programs without modification of the original program at the customer. For potential customer requirements, which are not part of the standard, SAP installs blank containers, which can be filled with own functionalities by the customer. Customer-Exits are administered by SAP .
T-Codes are
SMOD - To find a Enahancement/User Exits
CMOD - To Create Enhancement/Project.
Follow the steps
1. Go to CMOD there you have to give the project name that project name should get from your Functional people, or if you know no problem.
2. Click on Create button it will asks save it local or Package.
3. In Enhancements it will give the All Exits Names then double click on your exit
4. It will take you into a Functional Module nothing but your Exit.
in that Exit you will find Include Program i.e. Eg: ZXQSMU01 where you are going to implement your logic.
5. Double Click on the Include program it will asks create object click enter
it will creates there you can write your logic save it local or any package and Activate it.
6. You need not to pass any values from Functional module/Exit to Include program that import/export values automatically program will access, you don't bother directly you can access the import/export etc. values in the program.
Finally your Exit and Project also Activate it. then check your requirement reached or not.
Following Exit try it.
1. V60F0001 - SD Billing plan (customer enhancement) diff. to billing
2. V60A0001 - Customer functions in the billing document
3. V46H0001 - SD Customer functions for resource-related billing
4. V05I0001 - User exits for billing index ETC...
May be try these you can get or goto SMOD press F4 it will give a popup window there short text bill execute then you will get a list of exits check those.
if any clarifications reply me.
Regards
Ganesh

Creating / updating vendor master from CREMAS03

Hi All,
I am getting vendor master data from external system and SAP XI will convert this into Idoc of message type CREMAS03. I would like to create/update vendor master in R/3 system from Idoc CREMAS03. Which function module / BAPI will cater to this need.
Thanks and best regards
Kalingeri

Hi
Check in WE57 using the Message type & Idoc type & direction.
IDOC_INPUT_CREDITOR & IDOC_INPUT_CREDITOR_MDM are the the two Func modules being used. You can use any one of them based on your reuirement
Thanks & Regards
Kishore

BAPI/function module to create/update vendor master data

Hi
We are on ECC 50 and have a need to update vendor master data through a programatic interface ( non-dialog ) with ABAP. What is a good function module that can be used to create/update vendor master data - I looked at BAPI_VENDOR_CREATE and did not find any input interfaces that can be passed to this BAPI.
Previous experiences with the right BAPI for this purpose that can be shared is appreciated. <REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 26, 2008 5:58 PM

Hi Kiran,
If you want to load the vendor data into sap its better to go with LSMW batch input program.
object 0040
method 0001
program name RFBIKR00
Program type B
this would be a good choice. Recently i did the same.

How and where does SAP standard programs update the master tables...

Hello there,
How and where does SAP standard programs update the master tables...
to be precise.. if a (any) transaction occurs the programs behind it holds the data in temporary structures.
where and when does it get updated in the master table.
can anyone tell me how it happens?
I Know that from the where used list one can find the corresponding table but most of the time it wont suffice
I am expecting a proper answer.
Santosh B

Hello Santosh,
you need to do some self-reading on the following topic
Updates in the SAP System (BC-CST-UP)
http://help.sap.com/saphelp_47x200/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/frameset.htm
Regards,
Siddhesh

Cannot update Vendor Master (LFA1,LFB1,LFBK) in the background

Hi All,
I am workingon a requirement to update vendor master (LFA1, LFB1, LFBK etc) and after doing extensive research on SDN I came to know there are no BAPIs to update vendor and got information on function modules I can use and finally ended up using FM "Vendor_Update". I thought it is working fine because data gets updated in tables but when I checked the same vendor through transaction XK02, it still shows the old data! I even tried BDC recording with "Call Transaction" and it works in fine in foreground (I can see changes in tables and XK02) but nothing works in the background but user requires the program to run in the background. I spent last 6 hours on SDN researching and trying several suggestions but no luck yet. Can someone please share any information on any solution to resolve this?
Thanks in advance.
Ravi

Hi All,
I figured out that I have to check "Use central address management" check box which will be visible when you only record with option "Simulation in background".
Thanks.
Ravi

While Updating Item master 1250000088 - Date ranges overlap; change the active or inactive date range

hi.
i am updating item master.
just i am trying to update to inactive from active
i allready given the date ranges
but above error is comming..
        Dim vItem As SAPbobsCOM.Items
                    Dim RetVal As Long
                    Dim ErrCode As Long
                    Dim ErrMsg As String
                    vItem = ocompany.GetBusinessObject(BoObjectTypes.oItems)
                    'Retrieve a record by its key from the database
                    RetVal = vItem.GetByKey(Icode)
                    '' vItem.UserFields.Fields.Item("U_Status").Value = "Sold"
                    vItem.Frozen = BoYesNoEnum.tYES
                    vItem.FrozenFrom = "09/02/2014"
                    vItem.FrozenTo = "09/02/2014"

hi.
Thanks for your reply..
overlapping ..means
     'Retrieve a record by its key from the database
                    RetVal = vItem.GetByKey(Icode)
                    '' vItem.UserFields.Fields.Item("U_Status").Value = "Sold"
                    vItem.Frozen = BoYesNoEnum.tYES
                    vItem.FrozenFrom = "09/02/2014"
                    vItem.FrozenTo = "09/02/2014"
    vItem.FrozenFrom = "09/02/2014"
      vItem.FrozenTo = "10/02/2014"
i all ready tried above two ways.. given date same and given two diff dates....
but the same Error is comming..
Any info.plz update me..

Change in Sales Order/Service Order is updating customer master data

Hello Experts,
Here is the change happening in CUSTOMER MASTER RECORD for very few number of cases. This we are not able to replicate, since not able to find out, in which cases it is happening.
Scenario:
When the user tries to change address in customer screen (For eg., NAME2,NAME3 ,NAME4 etc.) of change transactions (VA02 OR IW32), the same change is being reflected or updated in the customer master record.
Note : We tried again doing the change(For the already changed order) in change transactions (VA02 OR IW32) and found that the change was not updating customer master, this time.
Hence, not able to replicate. Kindly suggest.
Resolvable suggestion would be highly appreciable.
Regards
Mahesh

I never heard of this before. Per standard, only when customer master address is changed (master data), the changes will reflect in the documents (transactional data). Your scenario reflects the other way round. Hence you may need to debug the program SAPMV45A and see any enhancement is causing this.
Regards,

UPDATE MATERIL MASTER

Similar Messages

Maybe you are looking for