Update Mode without update, on Sales Order

I have the following problem: The OK button change from Ok to Update without apparent reason.
I have added a tab control to the sale order so that now the Tab control contains 4 parts:
Contents, Logistics, Accounting and the new Tab which is called: Cost.
When I press on the Cost Tab even though all code on the event handler for the tab control is disabled the OK button changes to Update, and the B1 behavior is like the ipdate mode (no Browse or ok).
B1 version is 2007A pl42

Hi Motty,
Check the following thread
Form Mode changes to Update mode
Form Mode Update
*Close the thread if issue solved.
Regards
Jambulingam.P

Similar Messages

Update error in RV_SALES_DOCUMENT_ADD during Sales order creation

I get an Update/ ABAP runtime error during Sales order creation. The error occurs during processing of the update module -RV_SALES_DOCUMENT_ADD.
This error does not occuring always, as I am sometimes able to create a Sales order without getting update error. I am getting the error of all types of Sales orders and even contracts.
Am I missing any configuration parameters?
Thanks,
Chitra

Yes , I can see the error in ST22.
While exceuting VA01 (Oder type OR, Entering Sold-to-party, Purchase order NO, Material, Qty, Plant),
- I get run-time error "Run-time error "GETWA_NOT_ASSIGNED" occurred".
    Analysis of error shows:
     Update terminated in "Update module: RV_SALES_DOCUMENT_ADD"
      Fails in the Read table in one of the form
        Termination occurred in the ABAP program "SAPLV45U" - in "VBAP_BEARBEITEN"
The main program was "RSM13000 ". In the source code you have the termination point in
line 147 (READ TABLE FYVBAP WITH KEY VBAP_KEY.)
of the (Include) program "LV45UF0V".
The ABAP's say the functional module is trying to do an 'UPDATE' instead of 'INSERT" in the internal table FYVBAP.
Thanks,
Csuman

How to update the condition price in sales order while creating the invoice

Hi,
How to update the condition price in the sales order to carry out the new price while creating the invoice?
While creating the invoice it should update the condition price in sales order.
Thanks,
Balaram

No, pricing is not there in delivery.
I found an exit for VF01transaction where we can update the price in order.
Can you please tell me how to update the price if I have the order, material numbers and conditions number?
Thanks,
Balaram

This field cannot be updated as there are open sales order lines

When trying to enable Item Attributes then I am getting a message "This field cannot be updated as there are open sales order lines". I cancelled the Sales Order ( which was having only 1 sales order line and that is also cancelled) but still I am getting the same message.
How to overcome this problem.
Khan

Thanks Karthik & Sandeep........
Issue got fixed. There was an open Sales order Line because of that line the issue was coming. After cancelling that SO Line, Users were able to update the Item field.
Regards,
Khan.
http://moreapps4u.blogspot.com/

FM for Updating Installation date in Contracts + sales orders Item level

Hi
Plesae give any FM for Updating Installation date in Contracts + sales orders Item level for contracts tab.
Thanks and Regards,
Vishnuvardhan....

Have used the billing transaction to set a Default Billing date at time of blling.

Usage of delivery without reference to sales order

Hi ,
I want to know in which business scenarios we will create the delivery document without reference by usiing VL01NO followed by billing document.
Anticipating a positive response
Best Regards,
Goutham

Hello Sachin,
I want to make a delivery without ref to sales order. But I want to block it after saving it. How to do that ?
Use TCode VL02NO
Can I assign a block at schedule line category level. Will that block the delivery ? Will this be an item block if this is possible !
Delivery block at schedule line category level will not block deliver doc, whereas, it will not allow you to create delivery doc with reference to that sales order with delivery block.
Now for your requirement, to block a delivery doc for further processing. Maintain or select appropriate Reason for Rejection in Delivery Doc Item.
Regards
JP

Deliveries without reference to sales orders report/extract

Hi,
Please assist. In our business the users are creating sales orders and then a delivery but when they create the delivery, the line items from the sales order is deleted and new line items are created on the delivery and this breaks the document flow and leave room for fraud. Can you provide a report or an extract we can run to see how many deliveries has been created without referencing to sales orders. thanks. Suzann

Hi,
I dont know whether there is any report for this requirement.
However, you can restrict if the item should be added without reference or not in OVLK, select your delivery type and select 201 requirement in the field item requirement.
System will not allow you to enter / add any item that does not refer to sales order.
Hope you get some inputs
regards,
Sagar

Sales order costing - Z-report without going to sales order/quotation

Dear All,
Currently we are arriving the pricing thru sales order costing. After doing the sales order costing in sales order / Quotation, the costing value flow to condition type EK01. Now management has decided that, to go for manual price and put it in z-table. From z-table system will pick and show in sales order / quotation.
Now management want to compare the sales order costing price as well as z-table price. They need z-report.
They will put the material, plant, pricing date and costing variants in the initial screen. then after execution of this report, they should able to see sales order costing price and z-table price.
They do not want to do the sales order costing thru sales order/quotation.
Now the problem here is I do not know how to do the sales order costing without going thru sales order/quotation. Please provide the FM, or related table for this report.
Waiting for you reply.
Regards,
Niranjan

Hi
Check the table KONV, with respect to VBAK-KNUMV. the table KONV keeps the record of all the Condition type of a documet and KNUMV no is a unique no. generated by the sytem for avery document.
Hope it will help.
Regards
AA

Pricing in outbound delivery without ref to sales order

Hello,
I am creating a delivery without ref to sales order. I need to do pricing in the delivery for the material sold.
1 ) I have never done the above. can someone tell what are the config steps for the same and what is the t code to create condition records (is it same as VK11 ).
2 ) secondly I need to carry the pricing in the delivery to the proform invoice created with ref to delivery. How to do the same.
regards
Pamela

Hi
1 ) I have never done the above. can someone tell what are the config steps for the same and what is the t code to create
condition records (is it same as VK11 ).
Yes You need to maintain Condition Records Through VK11 only
2 ) secondly I need to carry the pricing in the delivery to the proform invoice created with ref to delivery. How to do the same.
But i am not why you required pricing procedure in delivery , but most the cases Delivery level we required Freight Charges
At the time of Pro-forma Invoice system will pick the pricing procedure and you can check
if you still want pricing procedure in Delivery level , assign Pricing procedure to Delivery Type
Menu Path: SPRO> Logistics Execution>Shipping>Basic Shipping Functions>Pricing--->Define Pricing Procedures for Delivery
Regards,
Prasanna

Block in delivery without ref to sales order

Hi,
I want to make a delivery without ref to sales order. But I want to block it after saving it. How to do that ?
Can I assign a block at schedule line category level. Will that block the delivery ? Will this be an item block if this is possible !
regards
Sachin

Hello Sachin,
I want to make a delivery without ref to sales order. But I want to block it after saving it. How to do that ?
Use TCode VL02NO
Can I assign a block at schedule line category level. Will that block the delivery ? Will this be an item block if this is possible !
Delivery block at schedule line category level will not block deliver doc, whereas, it will not allow you to create delivery doc with reference to that sales order with delivery block.
Now for your requirement, to block a delivery doc for further processing. Maintain or select appropriate Reason for Rejection in Delivery Doc Item.
Regards
JP

HT201541 How can I update Safari without updating the OS?

How can I update Safari without updating the OS? I presently have 10.7.5 and 1.6.1
I am getting too many notices that my browser is out of date...
b
PS, a note to Apple. You use terms like Mountain Lion, Yosemite, etc. But in other places you use
10.6, 11.7, etc. Could you be consistent? use one or the other, not both. Please. Or always use both together.

Shoot Apple, you don't make things easy. I don't want to upgrade OS as you now require an itunes account to get upgrades, and I'm against that. (until I have to).
So I switched to the chrome browser, that works.
PS, Ralph, yes, I can lookup the version numbers, but I have not felt the need to memorize them. My question is why does apple make it so difficult that we have to memorize the version number to name correspondence?
b

Can I reserve inventory without create any sales order?

Dear all,
I would like to reserve 1000 kg for wholesalers use without create any sales order?
Can I do that?
Best Regards,
Amy

Hi,
In Inventory Super User: On-hand, Availability: Reservations, look for the reservation you have previously created. Then, go to Tools Menu and select Transfer Demand. In the form opened, define Sales Order as Demand Type, and then inform the sales order and sales order line. Then, press the button transfer.
Hope it helps,
Ketter Ohnes

BAPI_SALESORDER_CHANGE to update reason for rejection of sales order item

Hi,
The FM BAPI_SALESORDER_CHANGE is not working properly as I am getting below error when try to update the reason for rejection at sales order item level.
The delivery is done for this salesorder. Is it because the reason for rejection field is not as an input field when delivery done?
error in return table is " Field 'ABGRU' cannot be changed, VBAPKOM 000010 ready for input"
Request your suggestions to avoid this error.
Thanks

>
anikaushi wrote:
> Hi,
> The delivery is done for this salesorder. Is it because the reason for rejection field is not as an input field when delivery done?
>
> error in return table is " Field 'ABGRU' cannot be changed, VBAPKOM 000010 ready for input"
>
>
> Thanks
Yes, Most likely.. You can confirm this by trying to change a order without delivery and see if it goes thru (to ensure that you have passed correct parameters)...
you may have to delete the delivery (and if billing document exist, cancel it), before you can reject the line item... it would be safer to raise an error message and let the users manually delete delivery document as long as you don't have large volumes of this scenario..
Please see the SDN thread for how you can avoid this error...
Re: Cancel Sale Order after Issued Billing

Update KOMV-KBETR field for sales order and billing

I would like to update the KOMV-KBETR (condition amount or percentage) under condition tab for both Sales order and billing.
example:There are two condition types ZA00 and ZB00 and need to get the KBETR value from ZA00 and add it to KBETR value of ZB00 and update the sum in KBER value of ZB00.
1. creation of sales order & billing.
2. Change of sales order & billing.
3. For single & multiple line items in both sales order & billing.
4. during updation of price in the change mode of sales order & billing.
5.When user click on Update button in the condition tab(i.e., when clicked on Carryout new pricing)
I tried with the VOFM routine but as the routine is triggering multiple times the sum is calculated again and again.For that I set flags also.It is working for sales orders but for billing creation the field XKOMV-KBETR is cleared after this routine.
So I would like to know are there any EXITS for this scenario or any one entountered the similiar issue which I am facing.

Hi Brad,
It is an Client requirement.So need to do the addition of that condition types.
Can you please let me know the configuration point where we can do it and the condition type which we need to update the Rate/Amount value.ie., KOMV-KBETR is and Price list value and not the subtotal one.
Thanks,
Srilakshmi Lagisetty.

Update Material Availability Date for Sales Order having a Delivery

Dear Gurus,
We have a bit out of the way scenario. There is a o/b delivery already added to a shipment. And then we receive a IDOC from external MES System (i.e. Production) with new material availability date. This new material availability date is updated on Sales Order. In short the order is delayed.
Current Solution:
In this case the user has to remove the delivery from the shipment manually. then the IDOC deletes the delivery and the updates the sales order with new date followed by creation of new delivery.
The business expects to updated the Sales Order material availability date without changing Shipment / delivery. Any solution?
Current solution has to be changed as for Shipment purpose changes are made to delivery which are lost when the delivery is deleted.
Edited by: abhishek singh on Feb 3, 2012 10:21 AM

hi
in this case you have to adopt the business process change.
you have to update the EDI first and then you create delivery.

Update Mode without update, on Sales Order

Similar Messages

Maybe you are looking for