Update N73 with Arabic Language

Hi all,
This is the first time for me on this Nokia discussion board.
My asking about how to update my phone N73 languages with Arabic language which is not included into the original setting for the phone software, in other words how to add the Arabic language to N73 phone?
Need a quick reply
Thanks in advance
Tamer

Normally, phones are provided with languages for the country or region where it was intended to be sold, but sometimes the retail trade moves phones about before they are sold to the public, so it is possible that you have a phone that was not intended for an Arabic country.
A Nokia service point may be able to add the arabic language pack.

Similar Messages

  • Error while using Function module SPELL_AMOUNT with arabic language AR

    Hi ,
    When i am trying to convert the number to words, using function module SPELL_AMOUNT with arabic language(AR),following abend message is coming and FM is getting abended.
    Entry AR 0 1 in table T015Z does not have a delimiter (
    Can you please provide me how to overcome this error?
    Thanks & Regards
    Seshagiri.

    Hi Santosh,
    Thanks for quick inputs.
    And amount is not having any delimitors.
    I have checked in table T015Z and it has entries with AR as SPRAS.
    All entries are having ':' at the beginning of the arabic words,and there is no single entry with ';'.
    All entries with EN as SPRAS are having delimiters ';' at the end of the words.
    Numbers are correctly converted to words in english,but abending in arabic.
    Any idea please.
    Thanks & Regards
    Seshagiri.

  • Check printing in English along with Arabic language

    Hi,
    My requirement is to print check in English along with Arabic language.
    All details in English, except vendor name, which should be in Arabic.
    I am maintaining two forms one in English and 2nd in Arabic language.
    2nd form which is in arabic is meant for Vendor name in arabic.
    My print program flow in brief is as follows:
    OPEN_FORM.
    In between, after writing all the English details, i am ending the English form and then starting Arabic form and printing vendor name and ending the Arabic form.
    CLOSE_FORM.
    In stead of single page I am getting 2 pages as output.
    Page1: English details, without Arabic name.
    Page2:Vendor name alone in Arabic.
    Can you please tell me how to print vendor name also on the 1st page itself along with other details in english.
    Thanks & Regards
    Seshagiri

    Hi,
    Have you got the solution to your problem? what you did?
    Actually I am now have the same problem. I have to print the korean text (Customer Address which is in korean in master table). in debugging mode it is coming correct. while printing it is prnting as #. Currently i am maintaining only one form in english.
    Have you maintained two forms or how you did to display the arebic?
    Its urgent please reply.....
    Thanx In advance

  • What is the best office program for mac dealing with arabic language?

    what is the best office program for mac dealing with arabic language?

    The best word processor is Mellel.  TextEdit, Nisus Writer, and Open/Libre/NeoOffice should also work OK.
    MS Word for Mac does not do Arabic, but I am not sure about Excel and PowerPoint.  If not, OpenOffice would be the only option.
    iWork has bugs that probably make it unsuitable for RTL for most people.

  • Data Merge not compatible with Arabic language?

    I am using Data Merge in InDesign CS6 (Middle Eastern version) with Arabic language content. The resulting text is all gibberish (mostly rectangles). Can someone help, please?

    Im having the same problem, My arabic text is displaying in the unicode text file.  My paragraph is set to world ready, but it still displays jibberish. Any idea?
    EDIT:  I think I solved it. Had to combine your solution with  useing notepad++ to  convert internal file encoding to UTF-8 WITHOUT BOM
    http://forums.adobe.com/message/6261281#6261281

  • Firmware with Arabic language

    Hi
    I just bought Sony z1 from  UK 
    but The problem is No Arabic Language 
    plz if u have firmware with Arabic lang Can u add here TFT 
    thanks

    Here you go 
    http://forum.xda-developers.com/forumdisplay.php?f=2508
    Don't forget to give Kudos
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Text Printing mismatch with Arabic Language

    Hi gurus,
    I have a requirement in printing the dunning form in different language based on the customer. Currently based on the language condition i m  calling the text element with right alignment. But i m observing a strange problem with the arabic language that my sentance is getting mismatched. e.g. text "Enclosed please find our statement' it is printing "please find Enclosed our statement".
    I am using a standard text includ for displaying the text.
    Please respond with solution. <removed by moderator>.
    Edited by: Thomas Zloch on Feb 25, 2011 5:29 PM - priority reduced

    Hi, you do not need to do any thing to handle the RTL text. SAP itself handles the situation. but you need to be carefull while using mixed language like english and Arabic together in same form. there are some upgrade patched required to be applied to solve the problem else your text will be printed in mismatch format.

  • Creating TOC in CP4 with Arabic language contents

    Hello all,
    i'm preparing my captivate project4 using Arabic language.
    The TOC entries with Arabic words are switched left to right instead of right to left during project preview.
    what to do? your help please

    Emma_Baillie wrote:
    I have a bunch of files with names in Japanese characters (also Chinese, Korean, Spanish etc, but this will do for an example). The encoding is Unicode.
    I wish to be able to put them in a zip file, then extract them again using any old zip tool (WinZip,PKZip,7-Zip etc)
    Trouble is, every time I do it, the files inside the zipfile end up with garbage character names. The contents of the files are fine, though.This is becuase zip tool doesn't support unicode for zip entries. For example WinZip prior to 11.2 does not support Unicode characters in filenames. You need to look for the simillar information for other tools. You can find more on tools on their website.

  • N73 with arabic support

    I made update for the software of my mobile and after that i found the arabic language not any more exist can any one help me to retrive the arabic language

    Search for "Arabic" here, and you will find posts explaining why it happened, and what you might or should do:
    /discussions/search?advanced=true

  • After I updated software lost Arabic Language

    I bought a Nokia 6300 from Dubai and the orignal language was Arabic , then I made software update ( updated to 550) but after that I found the languages are only (English, French and Portgees)
    in order to get the Arabic back I have tried to restore it to the orignal factory setting but without any success.

    Your phone was originally manufactured for a region where French and Portugese is spoken (English is always on every device).
    Then someone imported it to an Arabic speaking country and illegally updated the firmware.
    When you used NSU, the upgrade used the information on the phone (product code) to install the latest version of the original firmware.
    You can ask if a Nokia repair center in an Arabic speaking country can help you.
    Or you can return the device to the seller and ask for a device that was originally also intended for an Arabic speaking country (or you can buy a new one from a reseller that sells legally imported devices).

  • Problem with arabic language in report 10g

    hello all, sorry i can't speak english very well
    im using oracle database 10g and forms,report 10 g
    windows xp sp3 operating system
    i call my report from my form its working very good
    but report language appear  is symbol something like this pic my language is arabic
    [http://imageshack.us/photo/my-images/6/reporterror.jpg/]
    please help me and thank's

    rzuluaga wrote:
    Hi,
    - What is the NLS_LANG value you are using for your reports environment?
    - How is the output if you use desformat=html?
    - What font are you using in this report?
    - When you run the reports in Reports Builder how does it look?
    - There is a good support note regarding Font issues that is worth it to review
    Reference
    Master Note for Font Issues in Oracle Reports (Doc ID 1297012.1)
    Regards
    What is the NLS_LANG value you are using for your reports environment?
    ARABIC_EGYPT.AR8MSWIN1256
    How is the output if you use desformat=html?
    [http://imageshack.us/photo/my-images/221/report1h.jpg/]
    arabic is good is html but design not good
    What font are you using in this report?
    Arabic Transparent -i sure this font is good for arabic-
    When you run the reports in Reports Builder how does it look?
    [http://imageshack.us/photo/my-images/191/report2vl.jpg/]

  • N97 Arabic language lost after updating.....

    Hello Everybody.
    I will make it simple this time.
    I have 'middle east' version of nokia n97 with Arabic language included."I could write in Arabic"
    after updating to V22 I couldn't do that any more?
    Is it possible to reinstall that language back without Hard resetting my phone ?

    farby wrote:
    This thread will explain the reason.. Be warned that any Future Firmware Updates / Re-install will again remove this language and you will need to get it installed again thru' Nokia Care...
    Future firmware updates will not remove the language after that, if whomever does the flashing also changes the product code to match the new firmware language variant.

  • Plss... Help After Updaing N73 Arabic language is ...

    I have recently updated my N73 previously arabic language waa installed in the phone but after updating the arabic language is gone,, plsss help to get back arabic language..

    Use the search feature and look for many existing posts around the subject. Keywords to search for: "Arabic" and "product code".
    /discussions/search?advanced=true

  • Input textfields for arabic language with Flex

    Hi!
    I would like to know how flex work with arabic language. Does
    it permet to write text correctly in input textfield, or is ti the
    same problem as in Flash 8 Pro ?
    Thanks for your help
    Damien

    The Flash Player itself does not easily support right-to-left
    text manipulation.
    We all hope this will be addressed in an early future
    version, but there have been no announcements.
    Tracy

  • Language pack to work with Arabic

    Hello...
    I am a registred Adobe Production Premium CS5.5 user. I would like to know is there any language pack/ plugin to work with Arabic language as well as English for listed softwares.!
    Photoshop CS5.5, Illustrator CS5.5, InDesign CS5.5, Dreamweaver CS5.5 etc..
    I am looking forward to hearing your great support..Thank you

    Production Premium is not part of the Technical Communications Suite. The Adobe CS forums are more appropriate. However to answer your question, you really need the Adobe ME versions of the Adobe Suite. This is a special licensed version of Adobe software customized for the Middle East Language support:
    http://www.fontworld.com/me/creativesuiteme.html

Maybe you are looking for

  • How to change default value of a parameter and LOV attached to a parameter

    Hi All I am new to discoverer reports and I need to accomplish the following tasks: 1. Need to change the SQL query of a discoverer report 2. Need to change the default value of parameter ( from constant to current month). In the discoverer plus resp

  • Open SD orders and partner type?

    Hi, I need to extract 'open sd orders' and 'partner type'  i.e all partner types  and not only  just SP or  SH The transaction  VA05 does no allow  all partner functions - and I need to sort by all types is there another way? If I want to use SQVI .

  • OSB conditional branches

    Hi, I have problem with conditional branches in OSB. I have 2 business services and 1 proxy service which route message to one of 2 business services. Conditional branch look like this: XPath: ./ter:process/ter:provider In Variable: provider Terminal

  • Itunes 11.1.4.62 now screen resolution problems

    downloaded itunes 11.1.4.62 now screen has resolution problems

  • Assets Disposal Payment System - F107_START

    Our Client have new requirement - " Asset Disposal Payment system " Specfic to Japan Only. Its new accounting Principle thas has been added to Japan Accounting Principle. Is any one have experience on this. Please let me know. I went through some SAP