Update N95 but become it dead

I tried my phone update with PC, it was ok by instructoin on page in the last 3/3 its says connection lost to phone, I retried accoeding the page message, I tried also accoding the FAQ, uninstall and reinstall the pcsuite and the software uploader, lastly I tried to recove the phone by pressing 3,answer key and * by the phone dont turn on, now I tried again but the pc cannot detect my phone. If I uninstall the bettery and install again and press the power button the key pad key light up but phone does not on again..
I really feel sorry I try to make better but I lost the phone.. I think the phone never will come ok,, help me if any one have any idea about this.. thanks to all
Message Edited by babor on 11-May-2008 06:28 PM

Any place there opening phone repair have flashing tool. The phone not dead, it is a software problem. Try to locate the nearest phone repair to flashing your phone, the phone can still operate again

Similar Messages

  • (P67A-GD65) BIOS update worked but now ACPI dead?

    Hi guys, anyone seen this before?
    P67A-GD65(b3) + i5 2500K + G Skill Ripjaws 1600 + MSI GTX560  (all about 1 week old)
    Did a successful BIOS update to 1.B (which is what the AU msi site listed as latest BIOS, I now realise that 1.C is out).
    Everything seems fine in BIOS but Win7 hangs at "Starting Windows" (regular boot, repair boot, even the install setup boot from disc).
    Booting from a Linux cd it hangs at the ACPI part.
    System was perfectly stable prior to this (but my mouse didn't work in BIOS and XMP timings didn't seem to be applied, hence the update).
    BIOS update was done using forum USB tool. CMOS has definitely been cleared.
    Any suggestions? I am probably going to try updating to BIOS 1.C but since I don't have a working PC now (posting this from our iMac) I will have to go use a friend's PC to run the USB tool and create the BIOS update stick.
    Thanks

    Quote from: HU16E on 26-June-11, 12:17:16
    For a short term test, raise DRAM V. manually to the maximum 1.65v's, set CPU V-Droop to low, phase control from SVID to APS.
    I did try a raised DRAM V at one point (to no success), but didn't touch phase control so could try that too.
    I have found one single way to make it load windows - by flashing 1.C directly from the "M-flash" page of the BIOS itself 
    The on the reset directly following the update it will then boot windows correctly.
    This first happened this afternoon and I rejoiced and then shutdown to reconnect all the devices that had been unplugged during diagnosis ... then when I went to boot up again ... hung ... again 
    Tried to get all scientific by trying voltage settings and unplugging case fans, etc ... nothing work so I gave up, did something (theoretically) foolish  and tried the M-flash page in BIOS again. Re-flashed v1.C again and once again it booted into windows 
    Starting to think along the lines of RMA here  ... this can't be normal. 

  • Updated N95 8Gb from v20 to v30 but restore failed

    I updated N95 8Gb from v20 to v30 but impossible to restore
    After restore and reboot the phone is empty with no data
    What is the problem ?

    YIPPPEEEE! FINALLY.. i was able tio upgrade my n95 8gb to 31.0.015.. i dunno y thr ws soo much of fuss earlier.. all i did was js follow the simple process..
    1.backed up my files..
    2.fully charged my battery js b4 the upgrade..
    3.turned off my kaspersky(Antivirus)
    4.turned off my firewall
    5.general profile..
    n zoooooooom! it upgraded!! without any hiccups.. i js lost all my msgs.. hadnt backd up properly.. bt m content!
    u cn try the same thng.. 99% it should wrk out.. i realised that i had decreased the level of antivirus protection and my firewall was still on, earlier.. mayb dats y it was causin so many problems.. bt this time around i js "paused complete protection" from antivirus.. stopped my firewall and it upgraded... eassssssyyyyy!
    hope it works out fr u.. lemme knw!! 

  • Updating N95 Firmware! Some important questions

    My N95 is currently running on V20.0.013. A major improvement in update were found in V20.0.015. Now a days the latest firmware is V21.0.016.
    Q1. If I update my N95 to 21.0.016, then would I get all the improved features of V20.0.015 as well or should I update my N95 step wise, i.e., first to 20.0.015 and then 21.0.016 to have all improvements. In V20.0.015, there were improvements in menu structure.
    Q2. I have pre-installed multi language dictionary on microSD card provided in the sale package. If I update my N95 to V21.0.016, would this dictionary still work or I have to re-install it again?
    Q3. Is there any problems which anyone encountered after updating N95 to V21.0.016? Any draw backs of this latest V21.0.016 software?
    I totally depend upon you technical guys, and always get satisfied with the nice cooperation of this forum members. I hope you'll guide me this time as well.
    Regards to all

    Hi erehman,
    Some answers to you here.
    A1. A new firmware will always wipe out everything in the phone memory. Absolutely no need to update first to 20.0.015. Go straight to 21.0.016.
    But the previous firmware to 20.0.15 was 13.0.003.
    A2. After an update of a firmware you need to reinstall everything. The memory card, though, is not affected and you do not even have to keep it in.
    A3. There may be some problems or odd functions, but all together the 21 firmware is better than the 20 firmware.
    harrykaa

  • Is it really vital to update N95 Firmware? Come up...

    Is it really important to update N95 all the time to the latest firmware version?
    What have those gained who updated to latest version, and what have those lost who are using the previous versions.
    Is it really worth considering to update N95 while taking into account all the risks of phone turning into brick during process, non-functionality of all the previously installed 3rd Party software, and many more complications?
    Does the new software really bring about dramatic changes to the N95 stability, start-up timings of the Java applications, improved menu structure, battery life etc. The presence of Flash Lite 3 may not be the key factor in updating N95.
    What are the main plus points for N95 users to update their phones and
    what are the main negative points that they should not go to update.
    Please take part to discuss your good/ bad experiences in this regard in order to make other N95 users clear as to what should be done.
    Regards
    Ejaz

    I used NSU to get 21.0.016 and I am happy I did it. The biggest improvement was with the WLAN connection, the old fw often failed to find my hidden home network, new fw has never missed it.
    Previously the browser couldn't load webpages that were more than about 1.5mb and often crashed with multiple windows open, but now the browser works just fine with 4mb pages and multiple windows.
    The only 3rd party sw that I had paid for was a game (Medal of Honor - what a waste of money that was) and that still works, but I did lose some of the free apps I had installed.
    So yes, if you use the browser a lot over wlan than I'd say it's vital.
    All those who believe in psychokinesis raise my hand.

  • I backed up my ipod. I then updated it but all of my data is still gone. How do I get my data back??

    I backed up my ipod. I then updated it but all of my data is still gone. How do I get my data back??

    Were the app in your iTunes library? If not the app data in the backup has no place to go. Redownload the apps in your iTunes libaray
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    and then restore from backup.
    iOS: How to back up and restore your content
    Otherwise, try restoring from backup again.
    If still problem that means the backup does not include the data.

  • Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

    Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

    jpg does not support Layers.
    Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

  • Software update, nothing but headaches.....

    About two weeks ago, I woke up to a message on my phone that said a software update had been downloaded and the phone needed to restart to install. I wish I'd known then what a headache this was going to cause me.
    A few days later I noticed that my phone wasn't ringing, my notification sounds weren't playing, and my alarm was going off on the screen but no sound. I always use my phone as my alarm clock, but can't trust it now. I turned my phone off and back on and the problem resolved. It has done it 5 or 6 more times since then. I'm on call for my job every three weeks, and I couldn't trust that my phone was going to ring this past week. Very frustrating.
    I've also had an increase in problems making calls and typing text messages. When I try to make a call it acts like it is connecting but I don't hear the phone ring or anything. My husband said it is connecting, and he can hear me, but I can't hear anything. When typing text messages, it will freeze up and I have to exit the message and go back in before it will let me type.
    I'm loathe to do a factory reset because of the amount of time it takes to get the phone back to the way I like it. Is this going to be my only option? When I first got my Droid 2, it was replaced twice in the first three months because I had nothing but problems. The 2nd time was a refurbished Droid 2 Global and it has been an OK phone. I've spent so much time dealing with technical issues though that I'm about ready to send Verizon a bill for my time.
    I'm not able to upgrade until August, but I can assure you I will never buy another Motorola phone.
    Is anyone else having the same problems since the update? Any solutions to the problems I'm having?

    Have you tried booting in Safe Mode and see if the device works as needed?   Try follow these steps and if this doesnt help then I would say its time to try a hared reset because issues do have a habit of showing its evil head after a update because of the update process changes and updates files but doesnt delete any personal settings and the old settings sometimes cause issues..
    Try booting in Safe Mode and then consider a Hard Rest.
    Enable Safe Mode
    Press and hold the Power button.
    Select Power off.
    Slide the keyboard open.
    Press the Power button.
    Press and hold the OK key.
    Continue to hold the OK key until Safe mode appears in the lower-left of the unlock screen.
    This may take up to 30 seconds.
    While in Safe Mode, remove the most recently installed applications. 
    Power cycle the device then attempt to use the device. 
    If the device works properly, install applications one at a time to identify the application causing the problem.

  • When I try to update apps on my iPad mini, I tap the "Update" button, but the app just opens and doesn't update.

    I have an iPad mini, 16G, WiFi only. My operating system is iOS 7.0.3. My problem is that my App Store has stopped updating apps. And it's not like the update starts, but never finishes. It doesn't start at all. I touch the "Update" button, and the app opens instead of updating. I have 9 updates now, and none of them work. And the rest of the App Store is working fine. I have no problems searching for apps or downloading new apps. It's just the updates that don't work. I had thought that maybe I needed to update my software and then it would start working, but I can't. The available software update requires 5.9G of storage, and I only have 1.6G. I also thought that maybe there was not enough forage to update the apps, but if that was the case, then it would tell me that there is not enough storage instead of opening the app. Does anyone know how to fix this? I really need to update my apps!

    Hey there nstephanie0625,
    It sounds like you are unable to update your apps in the App store because they launch, rather than update. I would recommend starting by signing out of your Apple ID in Settings:
    iTunes: Using the iTunes Store for iPhone, iPad, and iPod touch
    Settings > iTunes & App Stores > Create New Apple ID on your device.
    Then quit all the running apps on your phone:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the device and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • I have the version of itunes the ios 7 update requires but every time i try to update my phone it says i need the itunes version 11.0.5 but i already have it?

    i have the version of itunes the ios 7 update requires but every time i try to update my phone it says i need the itunes version 11.0.5 but i already have it?

    You need iTunes 11.1 which is not available for download in google chrome or other browsers.  The only browser it has worked for with me is Safari.  Hope this helps!

  • I am trying to update itunes but keep getting 'The feature you are trying to use is on a network resource that is unavailable - Click OK to try again, or enter an alternate path folder containing the installation package 'itunes64msi' in the box below'. ,

    I am trying to update itunes but keep getting 'The feature you are trying to use is on a network resource that is unavailable - Click OK to try again, or enter an alternate path folder containing the installation package 'itunes64msi' in the box below'.
    I am unable to install and also i cannot uninstall itunes, can anyone HELP PLEASSSSSSEEEEEE!!

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • My Reminder app won't open. It worked for a few days but later on it doesnt work anymore! tried rebooting my and updated it but it still wont open. When I try opening it, it crashes. What do I doooo? Please help me.      

    My Reminder app won't open In ipad mini 2. It worked for a few days but later on it didn't work anymore! tried rebooting and updating it but it still wont open. When I try opening it, it crashes. What do I doooo? Please help me.      

    Try to force quit the app
    Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.

  • When I try to open video files purchased through iTunes in Quicktime, I get the message: 'Error 23132: an unknown error occurred. This never happened until I updated iTunes, but when I try to go back to the previous version, I still get the message.

    When I try to open video files purchased through iTunes in Quicktime, I get the message: 'Error 23132: an unknown error occurred. This never happened until I updated iTunes, but when I try to go back to the previous version, I still get the message. It is more convenient for me to play videos in Quicktime since iTunes is such a memory hog. Please help.

    You may get better results if you switch to this alternate version: iTunes for Windows (64-bit - for older video cards) and, if needed, reinstall QuickTime. The new (nearly) all 64-bit version doesn't seem to play well with QuickTime. Perhaps if DRM authentication is required QuickTime needs to be able to see something that is part of the older 32-bit code.
    tt2

  • Have iphoto 9.0 working on a mac osx 10.7.4 yesterday ilife with idvd was downloaded into my mac,i can't open my iPhoto now its telling me to update app, but when i do it says no new updates are available at this time,and iPhoto update mesg pops up again.

    Have iphoto 9.0 working on a mac osx 10.7.4 yesterday ilife with idvd was downloaded into my mac,i can't open my iPhoto now its telling me to update app, but when i do it says no new updates are available at this time,and iPhoto update mesg pops up again.

    Hi,
    I scoured the web looking everywhere for a solution to this.
    Exit Code 15
    OSX 8.5 with Work@Home DVD media for CS6
    I followed instructions to run 3rd party cleaner software
    I tried the adobe removal tool
    removing all copies of adobe software manually
    installing from a new account, safe mode, plist everything suggested that i found did not work.
    A colleague suggested that removing the below folder would allow the installation:
    /Library/Application Supports/Adobe
    They turned out to be correct, so i am passing this on, because this took far too many hours of my time.
    Cheers,
    Smokey

  • My Mac refuses to open certain pages e.g. google/facebook for a weird reason "Your flash player may be out of date and you need to update it", but my flash player is up to date.

    My Mac refuses to open certain pages e.g. google/facebook for a weird reason "Your flash player may be out of date and you need to update it", but my flash player is up to date. I tried to install a new flash player version "setup.exe" but it said the file cannot be opened because the application is not supported on MAC OS X, does anyone have same problem? please help.
    Thanks

    i dont use google chrome,

Maybe you are looking for