Update notifications from OneNote 2010 Sync

12 people are using OneNote 2010 on a network.
These 12 people have 1 shared, main, departmental notebook but also, each has his/her own personal, notebook.
If someone adds a new page to the main, shared department notebook, how do the other people know that something new was added and where it was added? Is there some way for people to get a notification at the bottom of their screen "OneNote has updated
Notebook A - Section 4 - added new page" "Click here to view this update"?
Otherwise, this is double the work. And e-mail notification has to be sent out letting everyone know there was a OneNote update? And then from the e-mail, users must figure out where the update is in OneNote? The entire point is that we don't want to send
out the e-mails to begin with. So how could we do this?

Nevermind - figured it out!
However - to share with anyone who wants this answer!!!!
Page 8 of the guide tells you
When users open a shared notebook, recent changes made by other
users are automatically highlighted, so that
users easily stay on top of what’s new.
OneNote also adds the initials of the
user who made each change so that
other users can quickly see who wrote what. Point to the author initials for a ScreenTip showing the author’s full user name and the time of the edit.
Quick Tip:
On the
Share
tab, in the Shared Notebook
group, click Recent Edits
and then select a time
period (available time periods range from today to the past 6 months).
Users can also mark any text as unread for ease of review. To do this, just press CTRL+Q.
Though frankly I think a great addition to the program would be an actual Pop up update  at the bottom corner of a screen

Similar Messages

  • Auto-update Notification from a PM Work Order?

    Hi,
    Is there a way of automatically updating info on a Notification from a PM Work Order? For example, the operator who creates a Notification puts in a wrong functional location and this is carried over to the Work Order that is created from the notification. While, the work is being executed, the Work Order processor will change the Func. Location to indicate the right one. But this does not reflect on the Notification. I am sure this is not config. Is there any bapi that I can use? Please advise.
    Regards,
    Arun

    These are some related Function Modules:
    IQS0_CHANGE_NOTIFICATION
    ALM_ME_NOTIFICATION_CHANGE
    BAPI_ALM_NOTIF_DATA_MODIFY
    ALM_PM_MAINTNOT_MODIFY_DATA
    You may consult your ABAPer to identify and use to suit to your needs.
    Logic will be the code will match the F/Locn in Order and Notification everytime the Order is updated and use the above FM to update the Notification. Obviously you need to use this logic in a User-exit possibly IWO10009.
    KJogeswaraRao

  • How to remove keynote update notification from App Store?

    Hi guys, I am trying to remove Keynote and Page update notifications showing on App Store (since I don't use those apps). I have already deleted them from App folder.
    Right click on the notification does not show "remove" option (nor any other option). Any thoughts?
    Best,
    Manuel.

    Hi Imp68,
    You were right, I used migration assistant earlier and it seems that it created another folder for keynote and pages ( /Applications/iWork '09 ) and I missed to see it. Deleting it solved my issue. Thanks for the tip!
    Best,
    Manuel.

  • I've received an updater notification from MozillaFirefox.exe that doens't look like the usual prompt. Is it?

    I cannot remember the details and the notification box asking permission to update shows only when I first turn on my computer, but not afterward. At the top of the box, it shows: 'A program needs your permission.'
    It shows an exclamation mark on the left side of the box (!) Then in the centre, it shows Moxilla Fierfox, then my hotmail name and address, then things I cannot recall, then 'moxilla,,,exe
    It doesn't look like the usual updater notification. How can I tell?

    Shelady wrote:
    ... (wasn't even aware my gmail account had anything to do with Microsoft) ...
    It doesn't.  Gmail is owned by Google.
    Shelady wrote:
    Also can someone tell me how I report spam on my iPhone and iPad in a gmail account?
    Report it to Google:

  • Firmware Update Notifications From Other Peoples Devices!

    HI
    I have a MacBook Pro which backs up to a TimeMachine at work running under 10.5.4. This works great.
    But my machine (Airport Utility) sees many other Mac devices somewhere else in the building ... an AirPort Express and an AirPort Base Station among others.
    Right now I regularly get automatic pop ups asking me to download firmware updates and configure these other devices, which of course I can't... I don't have passwords to access! My Time Capsule is up to date.
    Any ideas on how to stop this happening ?
    Thanks
    Lee

    HI
    I don't run it. It just runs itself! As soon as I open the lid of my laptop Time Machine usually starts a backup since it hasn't done one all night. The Time Machine drive mounts on the desktop and data starts moving. The the Airport Utility pops up with firmware update notifications...
    Maybe there's some auto update turned on somewhere...
    Lee

  • MDT 2013, D: Wim not applying after update from MDT 2010 to 2013

    Updated MDT from MDT 2010 Update 1 to MDT 2012 Update 1, uninstalled WAIK, Installed MDT 2013, and then ADK, Upgraded all Deployment shares along the way, and now the extra drive (D:) Wim will not apply to Drive, i have tried two different ways to handle
    the said action, the first was using the Unattend.xml, adding the  DataImage Action, the other was using an Imagex command from the MDT task sequence. neither is applying the Wim, before the upgrade this worked. has any one else had this issue? 
    Thank you, 
    Dane Zittritsch
    Thinix Support Manager

    I moved from MDT 2010 to MDT 2013 and its just not working, i have tried a few different methods, the old way we used the
    Unattend.xml and placed a install order and that always worked, but now i am trying to use Imagex and its not applying the wim, when i get in the image the D:\ (Second Drive) is missing files.  Now here is the weird part, if i re-run the task sequence
    the D WIM is applied, but that's counter productive. i will apply my TS.xml information. 
    Ts.xml
    <?xml version="1.0"?>
       -<sequence description="A complete task sequence for deploying a client operating system" name="Standard Client Task Sequence" version="3.00"> -<globalVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable>
          <variable name="DestinationDisk" property="DestinationDisk">0</variable>
          <variable name="DestinationPartition" property="DestinationPartition">2</variable>
         <variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable>
         <variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
         <variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/>
         <variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable>
    </globalVarList>
    -<group description="Initialize the TS environment" name="Initialization" expand="true" continueOnError="false" disable="false">
    - <step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly"
    property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> </group> -<group description="Test"
    name="Validation" expand="true" continueOnError="false" disable="false"> -<condition> -<operator type="or"> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable> <variable
    name="Operator">equals</variable> <variable name="Value">VALIDATION</variable> </expression> </operator> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
    <variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Check BIOS" continueOnError="false" disable="false"
    startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBIOSCheck.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    -<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<group description="" name="State Capture" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATECAPTURE</variable> </expression> </condition> -<step description="" name="Next Phase" continueOnError="false"
    disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    </group> -<group description="" name="Preinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
    <variable name="Operator">equals</variable> <variable name="Value">PREINSTALL</variable> </expression> </condition> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
    </step> -<group description="" name="New Computer only" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DeploymentType</variable>
    <variable name="Operator">equals</variable> <variable name="Value">NEWCOMPUTER</variable> </expression> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
    <variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Format and Partition Disk" continueOnError="false"
    disable="true" successCodeList="0 3010" type="SMS_TaskSequence_PartitionDiskAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="OSDDiskIndex" property="DiskIndex">0</variable> <variable name="DONotCreateExtraPartition"
    property="DONotCreateExtraPartition"/> <variable name="OSDPartitions0Type" property="Partitions0Type">Primary</variable> <variable name="OSDPartitions0FileSystem" property="Partitions0FileSystem">NTFS</variable> <variable name="OSDPartitions0Bootable"
    property="Partitions0Bootable">True</variable> <variable name="OSDPartitions0QuickFormat" property="Partitions0QuickFormat">True</variable> <variable name="OSDPartitions0VolumeName" property="Partitions0VolumeName">OSDisk</variable>
    <variable name="OSDPartitions0Size" property="Partitions0Size">100</variable> <variable name="OSDPartitions0SizeUnits" property="Partitions0SizeUnits">%</variable> <variable name="OSDPartitions0VolumeLetterVariable" property="Partitions0VolumeLetterVariable">OSDisk</variable>
    <variable name="OSDPartitions" property="Partitions">1</variable> <variable name="OSDPartitionStyle" property="PartitionStyle">MBR</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDiskpart.wsf"</action>
    </step> -<step description="You can change the size of the partition(s) in the \Scripts\WinRE\DiskConfig.txt file. Make sure your partition is large enough to hold the recovery image if you install alot of software. Current configuration is 160GB
    for recovery, 60 for OS, 10 for scratch" name="Format and Partition Disk [Custom]" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable
    name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010 BETA\Configure-HDD.cmd"</action> </step> -<step
    description="" name="Copy scripts" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<step description="" name="Configure" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InjectDrivers"
    runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DriverSelectionProfile" property="DriverSelectionProfile">Dell OptiPlex 790</variable> <variable name="DriverInjectionMode" property="DriverInjectionMode">ALL</variable>
    </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> </step> -<step description="" name="Apply Patches" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallUpdatesOffline">
    <action>cscript.exe "%SCRIPTROOT%\ZTIPatches.wsf"</action> -<defaultVarList> <variable name="PackageSelectionProfile" property="PackageSelectionProfile">All Packages</variable> </defaultVarList> </step> -<step description=""
    name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<group description="" name="Install" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">INSTALL</variable> </expression> </condition> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
    disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description="" name="Install Operating System" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InstallOS" runIn="WinPEandFullOS">
    -<defaultVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable> <variable name="DestinationDisk" property="DestinationDisk">0</variable> <variable name="DestinationPartition" property="DestinationPartition">2</variable>
    <variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/> <variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable> <variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
    <variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf"</action> </step> -<step description="" name="Restart
    computer" continueOnError="false" disable="false" successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="SMSRebootMessage" property="Message"/> <variable name="SMSRebootTimeout"
    property="MessageTimeout">60</variable> <variable name="SMSRebootTarget" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Next Phase" continueOnError="false"
    disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    </group> -<group description="" name="Postinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
    <variable name="Operator">equals</variable> <variable name="Value">POSTINSTALL</variable> </expression> </condition> -<step description="" name="Copy Scripts" continueOnError="false" disable="true" startIn="" successCodeList="0
    3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Configure"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable
    name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<step description="Applies the D: wim to System " name="Apply Scratch Drive" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS">
    -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
    name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"\\thinix-dev1\navyImage$\Tools\x86\imagex.exe" /apply
    "\\thinix-dev1\navyImage$\Operating Systems\navycnic-gen_20131226100000\navycnic-gen_20131226100000_ddrive.wim" 1 D:\</action> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIdrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<group description="" name="Custom
    Tasks" expand="true" continueOnError="false" disable="false"> -<step description="Makes sure there is no Boot Config files on C drive and changes them to R drive:" name="Recovery Partition" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\Re-assign
    DriveLetter.cmd"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false" disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList>
    <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description=""
    name="[Custom] TDRBCD" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable
    name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\TDRBCD.exe"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
    disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> </group> -<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Set Phase" continueOnError="false" disable="false" successCodeList="0
    3010" type="SMS_TaskSequence_SetVariableAction"> -<defaultVarList> <variable name="VariableName" property="VariableName">PHASE</variable> <variable name="VariableValue" property="VariableValue">STATERESTORE</variable> </defaultVarList>
    <action>cscript.exe "%SCRIPTROOT%\ZTISetVariable.wsf"</action> </step> </group> -<group description="" name="State Restore" expand="false" continueOnError="false" disable="true"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression">
    <variable name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATERESTORE</variable> </expression> </condition> -<step description="" name="Gather local only"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/>
    </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> -<step description="" name="Post-Apply Cleanup" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\LTIApply.wsf" /post</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Recover From Domain " continueOnError="false" disable="false"
    successCodeList="0 3010" type="BDD_RecoverDomainJoin" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DomainErrorRecovery" property="DomainErrorRecovery">Auto</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDomainJoin.wsf"
    </action> </step> -<step description="" name="Tattoo" continueOnError="true" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTITatoo.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
    property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
    property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Opt In to CEIP and WER" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIOptIn.wsf"
    /CEIP:YES /WER:YES</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Windows Update (Pre-Application Installation)" continueOnError="true"
    disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    -<step description="" name="Install Applications" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallApplication"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplications.wsf"</action> -<defaultVarList>
    <variable name="ApplicationGUID" property="ApplicationGUID"/> <variable name="ApplicationSuccessCodes" property="ApplicationSuccessCodes">0 3010</variable> </defaultVarList> </step> -<step description="" name="Windows Update
    (Post-Application Installation)" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> <group description="" name="Custom Tasks" expand="true" continueOnError="false" disable="false"/> -<step description="" name="Enable BitLocker" continueOnError="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_EnableBitLockerAction">
    <action>cscript.exe "%SCRIPTROOT%\ZTIBde.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">BdeInstallSuppress</variable> <variable name="Operator">notEquals</variable>
    <variable name="Value">YES</variable> </expression> </condition> -<defaultVarList> <variable name="OSDBitLockerTargetDrive" property="BdeTargetDriveLetter"/> <variable name="OSDBitLockerMode" property="BdeInstall">TPM</variable>
    <variable name="OSDBitLockerStartupKeyDrive" property="BdeKeyLocation"/> <variable name="OSDBitLockerCreateRecoveryPassword" property="BdeRecoveryPassword">AD</variable> <variable name="OSDBitLockerWaitForEncryption" property="WaitForEncryption">false</variable>
    </defaultVarList> </step> -<step description="" name="Restore User State" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIUserState.wsf" /restore</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restore Groups" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\ZTIGroups.wsf" /restore</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
    name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Apply Local GPO Package"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplyGPOPack.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">ApplyGPOPack</variable> <variable name="Operator">notEquals</variable> <variable name="Value">NO</variable> </expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<group description="" name="Imaging" expand="false" continueOnError="false" disable="false"> <action/> -<group description="" name="Prepare Only" expand="false" continueOnError="false" disable="false">
    -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">PREPARE</variable>
    </expression> </condition> -<step description="" name="Copy Sysprep files" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Sysprep Only" expand="false" continueOnError="false" disable="false"> -<condition>
    -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">SYSPREP</variable> </expression>
    </condition> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action>
    -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Capture Image" expand="false" continueOnError="false"
    disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">YES</variable>
    </expression> </condition> -<step description="" name="Apply Windows PE" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf" /PE /STAGE</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn=""
    successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute
    Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<step description="" name="Apply Windows PE (BCD)" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%_SMSTSMDataPath%\Scripts\LTIApply.wsf" /PE /BCD</action>
    -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">ImageBuild</variable> <variable name="Operator">greaterEqual</variable> <variable name="Value">6</variable>
    </expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restart computer" continueOnError="false" disable="false"
    successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="Message" property="Message"/> <variable name="MessageTimeout" property="MessageTimeout">60</variable> <variable
    name="Target" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"
    type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
    </step> -<step description="" name="Create WIM" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBackup.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
    property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
    property="LoadProfile">false</variable> </defaultVarList> </step> </group> </group> </group> </sequence>

  • OneNote 2010 Windows logo key+s in Windows 8.1

    The screen clipper function from OneNote 2010 has stopped working in Windows 8.1. Is there any way to either change the short cut key in Windows 8.1 for the search function or the short cut key in OneNote to another key so they do not overlap?

    Hi,
    The OneNote clipping shortcut key in Win 8.1 has changed to Windows + Shift + S. If you don’t like this, we can change it to Windows + A by modifying registry.
    For more information, please refer to the following blog:
    http://blogs.office.com/b/microsoft-onenote/archive/2013/06/27/try-windows-8-1-preview-and-bring-back-your-favorite-shortcut-key.aspx
    Hope this helps.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Itunes 12.1 version update notification

    I downloaded the itunes12.1 version update on February 14th and keep receiving notifications even though iTunes tells me I have the latest update. Why does this notification keep showing up in the App store list of 'updates' when I have already downloaded it?

    Clear Cookies also and follow this Thread and fix from Old Toad Re: Hey guys, here's the deal: despite of the fact that I have all of the options at the Software Updated center all set up to perfectly receive updates notifications from Mac App Store, I'm not receiving none.

  • Adobe flash player update notification

    I have the latest version of Google Chrome on a Mac OSX.  I just got this pop-up on my screen. Is it legitimate, or might it contain malware?Is

    Personally, I don't trust update notifications from ANY software. Call me a cynic or a control freak, I'm probably both. If something "pops up" a notification, I'll go directly to their website and download whatever is available, but....
    In your system preferences, there is a Flash Player Preference Pane. Under the "Advanced" tab, you can SEE your version, and check for updates through the updater.

  • Adobe Update Notification

    How do I stop the Adobe update notification from popping up ever time I open my browser or a new browser tab?

    What does it say, in full?
    Does it go away if you allow an update?

  • I updated my iPad 2 to iOS 7 update notification window

    I did the iOS7 update to my iPad 2 about two weeks ago and ever since then, I can not get it to drop the 'Update' notifications from my 'Updates' page in my 'Apps' store. Every update that I have done since upgrading my iPad to version 7 is showing on the 'Update' page as being done and having the [Open] button on them.
    How can I get these to go away?

    They don't go away now. Partially, this is because apps can be set to update automatically therefore having this list makes it easier to show what apps have changed.

  • Sig update notification and frequency

    Hi Experts,
    What's the process by which IDS customers find out when new signatures (and service packs) are available? Is it the responsibility of the customer to check periodically or does Cisco automatically notify IDS customers?
    Also, approx how often do new signatures become available and what's the trend been like? More often? Less often?
    Thanks for any feedback.

    You can sign up for IDS Active Update Notification from here:
    http://www.cisco.com/kobayashi/sw-center/ciscosecure/ids/crypto/
    ...just follow the "IPS Active Update Bulletin" link near the top.
    The updates come out once a week or more.

  • Can I sync my iCloud calendar with Outlook 365?  I upgraded from Office 2010 and now it doesn't sync.

    I upgraded from Outlook 2010, and now it doesn't update in Outlook 365.  Thinking I can't do it, and it's a pity, cause I want it all to integrate on phone and on desktop.  I'm running Windows 7 and Office 365.  The iCloud app works fine with Internet Explorer, but I can't get the calendar to update.  Any suggestions?

    Can't I just set up Exchange as one of my calendars in ical?
    Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
    Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
    No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
    What is the best work around for this?
    None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
    I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.

  • Excahgne 2013 outlook 2010 don't update folders from exchange server, from owa send and receive is ok

    I have exchange 2013 server, with database for each department last week we have power problem, servers down 
    after servers goes on line, i have database with dirty shutdown, cant mount it, then i do eseutil/p, then i mount it, then all users access there mails from outlook 2010 they can send and receive, except one user cant receive new mail to outlook but he can
    send mails from outlook (in outlook the folder last update 22april), from owa he receive anew mails and can send,
    i try to delete outlook profile and create it again i get folder has not yet been updated
    i try to repair exchange database again, but the same problem
    i try to move it to another database or another server but move fail
    if i use outlook online (remove use cached mode) its receive new mails.
    Any help?
    Thanks

    Hi,
    What’s the user impact? If the issue only occur on specific users, I suggest we firstly take the troubleshooting from the client side.
    If the issue occurs to all the users, it’s seems the Outlook sync issue with the CAS server, not like a database issue. Do you configure the NLB for the CAS server?
    Thanks,
    Simon Wu
    TechNet Community Support

  • Cannot Sync my new contacts from I phone 4s to outlook but can sync a new contact from outlook 2010 to iphone. I could earlier sync both ways

    Cannot Sync my new contacts from I phone 4s to outlook but can sync a new contact from outlook 2010 to iphone.
    I could earlier sync both ways
    what could the problem be

    If your iMac is running 10.9, with contacts and calednar, Maverick is designed to sync those through the icloud
    http://support.apple.com/kb/PH12117
    " If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud."

Maybe you are looking for

  • Set Page item value when paging through an sql query report

    I have a report that includes a checkbox to indicate which rows a process is to be run on. I have a "Select All" button that sets a value to check all boxes in the report, and deselect button to turn that feature off. The page only renders one of the

  • Installing HP Photosmart 7520 all in one printer software

    My new HP Photosmart 7520 will not install on my Dell PC.  I have the 32-bit Windows Vista OS.  When installation begins I immediately get the error message: "Key not valid for use in specified state".  I've tried installing the CD and the software f

  • Potoshop's tools and windows disappears with Leopard's Spaces.

    Dear friends, I was having very annoying problem with PS CS3 and spaces. Interface disappears when you focus a program that is on other space. This was with Photoshop CS3 and Flash CS3 trials. I'm very sad about this. Instead of optimizing the proces

  • Storedge C2 autoloader - factory defaults

    I have a Storedge C2 autoloader that I do not have the username and password for. Could someone please tell me how to reset back to factory defaults? Thanks in advance.

  • 13" MBPr 2013 reboots if left with open lid

    If I leave my 13" MacBook Pro Retina with open lid for a considerable time I find it rebooted. (Though I never witnessed it to reboot in my presence.) This strange occurence happens in NO other situation: neither heavy load (Civ 5) nor staying with C