Update NW 7.0 to EHP1 with o without Update EP 7.0

*Hi, my company needs update Netweaver BW 7.0 to EHP1 but without update EP 7.0.*
*It's possible update only BW 7.0 to EHP1 and not update EP to EHP1 ? Actualy BW 7.0 is SP 17.*
*Another possibility is update only EP 7.0 to EHP1. It's possible ?*
*Thanks.*

Hi,
> 1) for dual stack you intend ABAP+JAVA installed on the same server and not on different server?
Dual stack means ABAP and Java installed on the same server with same SID.
> 2) if I updated BW 7.0 to EHP1 and I remain EP to the version 7.0 I could have problems on the EP and also with Web Query >(version 3.5 and 7.0)?
> 3) if I updated, instead, first EP to EHP1 and then a lot of time later BW to EHP1 I could have problems on the EP and also with >Web Query (version 3.5 and 7.0)?
I don't see any problem here.
> 4) Is necessary updated also ECC 6.0 to EHP4 for BW 7.01 EHP1 ?
>
No, its not necessary. But better if you have all products on same version for better maintenance.
Thanks
Sunny

Similar Messages

SRM 7 ehp1 with ECC 6 ehp5?

Gurus,
Is it mandatory to use SRM 7 ehp1 with ECC 6 ehp5? Our client has ECC 6 ehp 4 and is now upgrading from SRM 4 to SRM 7 ehp1. Can you share some links where I can confirm if SRM 7 ehp1 with ECC 6 ehp5 is mandatory?
Also pl let me know what is the difference between shopping cart creation in SRM 4.0 and SRM 7.0 ehp1. SAP says they have changed something and made it more user friendly. Is it different from normal SRM 7 (without the ehp component?)
Regards,
John

Hi,
There are 3 ways of sending PO from SRM to ECC
1.Via - RFC ( by setting the system landscape to a lesser version ) it will not have any side effects just that it used RFC connections instead of ESOA
2.Via PI - by setting the landscape to the current version and configure the relevant XML services in the SOAMANGER
3. via Non PI Web Services- by setting the landscape to current version . This time the webservices are configured in SRM system itself.
I have configured transfer of Contracts from SRM 7.01 to ECC 6.5 EHP5 as Contract/ Scheduling Agreement to the backend with Non PI Web Services(via XML). This way we didnt have to install PI at the client place which saved them a lot.
I have written a blog on how to transfer central contracts from srm to ecc using web services but without PI , please find the link below and hope it is helpful.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/06/13/transfer-of-central-contract-from-srm-to-ecc-using-web-services-without-pi
Regards,
Naveen

My ipad was being updated to ios 6.1.3 and when it rebooted it went to recovery mode. I want my ipad 2 back with or without my files.Please help

My ipad 2 was being updated to ios 6.1.3 and when it rebooted it went to recovery mode. I want my ipad 2 back with or without my files.Please help

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

HT4623 Updating to IOS and stuck on Rescue Email? Says optional email address to confirm your I.D. or reset a P/W but with or without typing an email address cannot move to Next screen or even cancel??? Pls help.

Updating to IOS and stuck on Rescue Email? Says Optional email address to confirm your I.D. or reset password but with or without typing email address in, cannot get past screen. Click on enter or Next and nothing happens. Cannot even cancel update. Pls help a.s.a.p. Thank you.

Updating to IOS and stuck on Rescue Email? Says Optional email address to confirm your I.D. or reset password but with or without typing email address in, cannot get past screen. Click on enter or Next and nothing happens. Cannot even cancel update. Pls help a.s.a.p. Thank you.

Delete an evenment with guests without send us the update

Hy
First, I'm sorry for my english
I would to know if is it possible to delete an evenment with guests without send us the update?
thanks

up?

Can I update my iPhone with iTunes without any sync ?

Hi everybody, I have a simple question, i want to know if can update my iPhone from iOS 6 to iOS7 with iTunes without any sync between iPhone/PC, because my MacBook Pro was stolen the last month and my iPhone was sync with the Mac.
Thanks

Although you aren't getting the "Unable to verify update" error mentioned in this article, you might try the same troubleshooting steps to see if they help with your problem: http://osxdaily.com/2013/11/15/fix-unable-to-verify-update-error-ios/.

What is the use of with and without marker update?

what is the use of with and without marker update?

Hi,
Marker Update Updates the stock values and NO Marker does not.
Generally BX upload has to be compressed with MU and BF(and UM) delta init has to be compressed with NO MU because Stock was updated with BX. And delta loads of BF and UM has to be compressed with MU because these brings new Material movements which will has to give effect to stock.
With rgds,
Anil Kumar Sharma .P

Will i be able to listen to music, watch videos and take pictures and sync with itunes without a sim in my locked iphone 5?

Will i be able to listen to music, watch videos and take pictures and sync with itunes without a sim in my locked iphone 5?

You will need a SIM to activate it. There is no way around that. The SIM does not have to be active, but it must be from the correct carrier if the phone is carrier locked. Once activated, it can be removed and used like an iPod touch, but if you ever have to restore or update iOS, you will need the SIM to re-activate it.

How to use ES bundles (with or without PI)?

Hello Experts,
I am new to this forum and this is my first question
I am currently working in a landscape comprising of ECC 6.0 EHP4 and APO systems. We do not have SAP PI installation.
I wanted to know the right way forward to get SOA enablement.
I understand that Service enablement is two fold (Please correct me if I am wrong):
1) 'Inside out' (from FMs) for which the WS runtime engine of the AS is sufficient. The services thus generated can be consumed directly from other SAP systems (within our landscape only??) or from a frontend app which can conume services (probably a widget developed in .NET with a cool UI).
2) 'Outside In' where services are modeled in PI/ OR standard SAP services (ES bundles) can be used.
My question , more precisely, is if we need SAP NW PI to use these ES bundles from the service marketplace.
If No, the how can it be done?????
If yes, then do the Business objects to which these services are related to also provided along with this content??? And do these business objects correspond the the ones whihc are available in the Business Object Repository in the backend???
Is there any other alternative to getting SOA enabled without actually having to instal SAP Nwtweaver PI??
I am really looking forward to some interesting answers from the experts on this forum.
Thank you well in advance. Regards,
Amith

> So, is it right if I say that the services available in the backend are already implemented? And just creating an endpoint for them would make them ready for use?
Yes: kind of instant services
> Also if I consume a service, say, 'CreateSalesOrder_In' for example, will it create entries in all my Sales order relevant tables (VBAK, VBAP) automatically using a BAPI internally?
The service has the task to do all necessary steps, whether with or without using a BAPI.
> Actually, I have these doubts because during my time at SAP Labs (for the composites team in BusinesByDesign), I used to create business objects in the ESR and create an implementation for the same in the backend using BOPF. But now, in the customer scenario, where a full fledged ECC implementation is used, I am unaware as to how the services would update the tables or even read the relevant data.
My consumer view on aservice is that I do not have to know how the service works, just need to know how to call it.
Regards, Boris

Camera wont capture when Tethering Canon T5i in Lightroom 4.4. Tried with and without card.

I just unboxed a Canon T5i (700D). I've been shooting with a T2i for the past three years tethered to LR4 with no problem. Now with the T5i, i connect the camera, set up a new tether session and LR detects the camera in the pop up bar, but the sections for Shutter Speed, Aperture, and ISO are blank. The capture button is able to be clicked, but the camera does not respond. When the shutter on the camera is pressed, also no response. I have tried this with and without the SD card. I have used three usb cable and two different computers. I have checked for updates and my firmware is current. The camera is set to manual mode in the on position NOT the video position and I am tethering to a Windows 7 computer. Please help!

You will need LR5 for that camera to be supported for direct tethered capture. Or you can use the LR "Watched Folder" feature and use the EOS Utility or other tethering software packages. Here is a list of some options - http://www.tethertools.com/plugging-in/software/

How to synchronise IMAP address book in Thunderbird, with or without Kolab?

I am setting up an IMAP account on my website's email, to use as webmail and on 2 laptops. As far as I can see, IMAP promises much but crucially fails to deliver. It does a great job syncing the emails in the three locations, but it is worse than useless having 3 separate address books all out of sync.
The TB docs mention the SyncKolab add-on to sync the address books. But this is complex and frustrating. If it works at all, I can't puzzle out how.
What syncKolab seems to do is to set up a new folder of the server called "contacts" and to place a message-form record in that folder for each address in the laptop address book. What good does that do me ...? Does this solve the problem in some way I'm not seeing? What I need is that the actual address book on the server contains the addresses on the laptops, and vice versa. I don't get it, how the server fold which Kolab creates, helps me. The server address book is not updated.
I do not need calendar or task sync, just address book.
With or without SyncKolab; indeed, with or without Thunderbird! how do I sync the address book on my IMAP server with my laptops?
Many thanks
Andy

looking at the add-on, the idea is simple, use an imap folder for address book data, very similar to what Yahoo does with the Y!Messages folder to store their chat clients archived messages.
install the add-on in two different Thunderbird installations and it uses that folder to synchronize the address book.
These instructions look simple. http://www.gargan.org/en/Mozilla_Extensions/SyncKolab/Installation/
All that would be left would be to modify the account in Thunderbird not to show that folder so it is not a distraction.

Query showing all customers with or without transactions

The content of the cube are all customers with transactions only. I want to create a report that will display all the customers with or without transactions. I tried to create a multiprovider combining the sales cube and customer master data. I created a query but it only displays the customes with transactions. Is there any other way wherein i can generate a report showing all customers with or without transactions?

hi,
the same problem happened, but no update whether it's solved, 'selection constant' should work
Multiproviders and filter on time
the link mentioned should be this
http://help.sap.com/saphelp_nw04/helpdata/en/e7/5f983c1a356858e10000000a114084/content.htm
Re: Determining NULL records

Playlists won't sync to ipad with or without ITunes Match

My playlists won't sync to my Ipad with or without ITunes Match. They appear to have on my iPhone 5.
Thanks

Did you ever get a fix for this? I have the same problem. Ready to quit Apple completely, just tired of the updates making things worse.......

How can I configure the save page mode (to save DEFAULT WITH OR WITHOUT images and other dependencies in a folder)?

I like it that I can save webpages with or without dependencies in a separated folder. And its implementation in Firefox (e.g. it remembers how I saved something before, and that way becomes the default) can also be good sometimes. But usually it is not.
Usually I want to save pages as HTML-only. Sometimes, but only sometimes I have to save a page as a whole (I don't know the name of the feature). But after I save something with dependencies, I often forget that, and don't care about this option. Firefox, however, doesn't forget it, and saves thousands of unimportant images, until I notice it and switch it off again.
This is not good.
I tried Google Chrome, which simply don't remember how I saves something before, and always select the complete page option for default. It is exactly the opposite of the perfect solution (in my opinion). The best would be if the browser would save everything as HTML only, if I don't change it. Or it would be even better if I could configure it manually (turn this remembering feature on/off).
This is not a beginner's problem, so it would be good if only a config option solved this. I imagine that already exists a config option for this, but I could not find it. I found only the "browser.download.save_converter_index" option, which depends on how I used it last time.
Is there a config option for this? Or should I report this in the Firefox brainstorm page?
Thank you for your time
D. J. S.

That choice is remembered in the Integer pref <b>browser.download.save_converter_index</b>
0: Web Page, complete (default)
1: Web Page, HTML only
2: Text files
If you want to reset that choice to HTML only on every start of Firefox then you can use this line in the file [http://kb.mozillazine.org/user.js_file user.js]
<pre><nowiki>user_pref("browser.download.save_converter_index", 1);
</nowiki></pre>
See also http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

How do I sync my iphone with itunes without losing everything on my phone?

How do I sync my iphone with itunes without losing everything on my phone?

Normally, you should be able to sync your iPhone with iTunes without losing anything
What can happen is that you might have emptied your iTunes library for any reason such as a system restore
If this is the case, you first need to Import iPhone library to iTunes and then, you'll be able to sync your iPhone with iTunes with no problem

Update NW 7.0 to EHP1 with o without Update EP 7.0

Similar Messages

Maybe you are looking for