Update of Acrobat X PRO fails with Error 1406

Here is a copy of the error message:
The registry key listed there cannot be found in the registry. 
Acrobat X PRO, version 10.1.6.  Windows 7 Ultimate, version 6.1, build 7601, service pack 1.

Hi Amorphosa2,
Please refer the kb: http://helpx.adobe.com/acrobat/kb/error-1402-error-1406-acrobat.html .
Regards,
Romit Sinha

Similar Messages

  • Acrobat XI Pro fails with a fall back error on Win 7 and 8

    I have been trying for a month to install acrobat XI pro on both win 7 & 8 machines with no success. They get to within 5 sec of finishing and fail with no error code just a message the something interrupted the installation and it was performing a roll back. I have tried this on a new machine with no adobe products installed as well as a machine I am upgrading from Acrobat x pro to Acrobat XI pro.
    I have spent hours on the phone with Adobe with no solution, I have searched the Internet and find many people experiencing the same problem but nowhere is there a solution.
    I need the product for business and am about at whit's end.  Can anyone help? Is there a solution?
    Thank you in advance for any assistance you can provide.

    I and many other people have successfully installed in Win 7 and Win 8 without issue, so something specific with your system is the cause. Run the Acrobat cleaner to remove anything left over from previous attempts.
    Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
    Then make sure that all extraneous software is turned off. No virus or spyware protection, nothing running in the background that you don't need to have running. I haven't tried in Windows 8, but in Windows 7:
    click on the start menu
    in the Search panel type: msconfig
    See if you can install during a Safe boot. If something is necessary for installation that is not available during a Safe boot,
    then look Startup Processes and turn off what you can, reboot and try again.

  • AirPort Express update to 7.6.1 fails with error -6753

    I have an AirPort Extreme acting as my primary base station, and a AirPort Express acting to extend my wireless network.  The Extreme updated just fine to 7.6.1 (The update took a while, but it was fully successful.)  But my AirPort Express repeatedly fails to update.  I get the message "An error occured while updating software -6753".
    Also note that I first did the update to OS X 10.7.3 (not yet a choice in the Operating System dropdown below this form.)
    Any thoughts?

    Hi Marne,
    Thanks for reply. Good to hear everthing is working fine with your Express.
    wifiguru wrote something  interesting on a similar thread, which helped me updating the Express. In the configuration of the Airport Extreme I switched from channels automatic to channel 12 (no special reason for that number, just a try). After that I could update the Express to 7.6.1 without a problem and everthing seems to work fine now. I don't know how to reference wifiguru's tips so here is a copy:
    wifiguru
    Re: 7.6.1 Airport Extreme Update problem     02.02.2012 07:38    (in response to Vijay S) 
    Have you guys tried switching channels after you upgraded to make sure it's not a bad channel/interference issue ?
    As for downgrading, if you launch AU and click on the AP, you will see the pop up which gives you AP details. You will see version info. on that popup. Now hold down the option key and click on Version and it will give you a drop down menu and you can downgrade to the older sw. if needed.
    I recommend playing around with channels first to eliminate other environment related issues before you do this.
    Now it's too late over here to test the HiFi but I'm very optimistic -> the iPhone Apps are working.
    All the best
    Gunter

  • Attempt to run automatic update to LightRoom 5.7 fails with error 1402

    When I opened and started to work in LightRoom 5.6 on my Windows 7 64-bit PC a notification was displayed in a popup alerting me that a newer version, version 5.7 was available and asked me if I wanted to install it.  I clicked yes, and was taken to an Adobe page to download the upgrade.  So far, so good.  The 976MB “Lightroom_5_LS11_win_5_7.exe” file successfully downloaded.  Sadly, when I attempted to run this exe, it failed to complete, displaying the following error message in a popup.
    Error 1402.Could not open key:
    UNKNOWN\Components\139C3899EB73E6C3DA23B8E687
    898618\2C99E910090657044B644883E7FA075A. Verify
    that you have sufficient access to that key, or contact your support personnel.
    While the exe file provided by Adobe did not harm my existing LR 5.6 installation, I “think” I would like to install their Automatic Update, but am unable to do so.
    Regards,
    Peter Sale

    Hi psale,
    Try to right click on the installer, and choose Run as Administrator.
    See if that helps.
    Otherwise this looks like a permissions issue, perhaps you don't have write access to your registry?
    Try creating a new admin user, and see if you can complete the install successfully there: Create a user account - Windows Help
    Hope this helps,
    Regards
    Pete

  • Updates fail with error 1328.   I have re-installed Acrobat XI Pro twice without problems.

    Updates fail with error 1328  I have re-installed XI Pro twice without problems.

    2
    William D. Burstow, CPG, QP
    Consulting Economic Geologist
    Tel:   541.573.1078
    Email:  <mailto:[email protected]> [email protected]

  • I have Creative Suite 6 Design & Web Premium installed on my HP Windows 7 laptop. All of a sudden Acrobat Pro will not open and I cannot reinstall. Get errors 2203, & Error-Install MSI payload failed with error 1603. Help.

    I have not been able to reinstall Acrobat Pro on my laptop. I have Suite 6 Design & Web Premium on my HP laptop. I have Windows 7 operating system. All of a sudden Acrobat Pro will not open so I uninstalled and tried to reinstall the program.
    The error messages I get are:
    ERROR: Error 2203.Database: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error -2147287035.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 2203.atabase: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error - 2147287035.
    ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
    Help PLEASE!

    Hi Patricia ,
    For error 2203 ,please refer to the following link.
    https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
    For error 1603 ,refer to this link.
    https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
    Let us know if this solves the issue .If required ,we"ll surely assist you further.
    Regards
    Sukrit Dhingra

  • Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

    Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

    Sorry I can't get the screen print to upload
    It says
    Mandatory Update Available
    A Mandatory version of this application is available for download. Application can't continue without installing this version.
    Application:     Acrobat_com
    Installed version: 2.0.0.0
    Update Version : 2.3.0.0
    Download now                    Quit
    Release notes ( this is blank)
    After selecting 'Download Now' I get the following message;
         Download failed
         There was an error downloading the update. Error #16820
         Close

  • Error 193: When trying to update Adobe Acrobat 9 Pro - Any help?

    I have had Adobe Acrobat 9 Pro for a few years and have loved using it. I have always updated the program and kept it up to date, but I have run into a problem.
    I was changing computers, so I deactivated all of my Adobe products, uninstalled them and deleted all of the information from it. I then start working and installing the programs into my new computer when it froze and crashed. I ended up having to return the computer and have it worked on, but I did deactivate and unstall all of the programs from the computer before doing so. Now I'm back to my old computer and have started having some trouble. I reinstalled Adobe Acrobat 9 Pro, went in to run the updating, but as soon as it checked and let me know there were updates available, I said start and a box popped up reading:
    Does anyone have a reason the occurred and what options I have to correct this? I searched and read that  one of my options was to go into Adobe (http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows) and run the updates manually, but that would mean downloading and installing over 20 updates, one by one. I know that I don't have to keep restarting my computer after each one and only after the last, but there has to be another way. That would take me a couple of hours where I couldn't leave my computer.
    I did try to uninstall the program again and then reinstall it, but no I had luck there. I received the same error message telling me that the update failed.
    Can anyone help me let me know why this is happening and what I can do to prevent/stop this?
    Thanks,
    Sean

    Please read this below:
    http://msdn.microsoft.com/en-us/library/windows/desktop/ms682425(v=vs.85).aspx (look for “…If you are using a long file name that contains a space..))
    Updater downloads all the updates into AllUsers folder.
    Somewhere in the path to this folder you most likely have a file that has the same name as partial folder name.
    For example, on XP this folder is C:\Documents and Setting\.."
    If you have a file C:\Documents.exe Updater will fail with error 193

  • Update 9.0.2 to Acrobat 9 Pro fails to install

    Am trying to update Adobe Acrobat 9 Pro, and the update fails to install

    Normally you would do the updates from the Help>Updates menu from within Acrobat. Sometimes the server has issue or other problems come up and the updates do not work for some reason. The current level of AA 9 is 9.5.5. To do the updates manually, go to http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (similar for MAC, but you did not state the OS), download from the latest to the earliest. The reason for this order is to note with each update the previous update that is needed. Then install the updates in order. You only have to reboot after the last update.

  • Built-In Keyboard Firmware Update 1.0 fails with error 23:3 on MacBook 2,1

    I attempted to install "Built-In Keyboard Firmware Update 1.0" on two laptops tonight.
    Macbook Pro 3,1:
    Hadn't experienced the issue that the firmware would resolve. Installed the update anyway, successfully, and continued to have no problems since.
    Macbook 2,1:
    Hadn't experienced the issue that the firmware would resolve. Tried to install the update, but it failed with error "23:3". After the failure, the keyboard was non-responsive for about 30-60 seconds, during which time I assume it restored/re"booted" itself. Keyboard function was restored automatically after this time, though there was no indication that it would return, and I had to suffer a minor sweat. Still, I didn't learn I power cycled the system and tried again, but the update never installed successfully.
    Lessons learned -
    If it ain't broken...
    That said, Apple seems to have designed their hardware well enough to be able to recover from a failed firmware update. In this case, you just have to pray a little until the keyboard responds again.
    Apple: be so kind, let us know what 23:3 means, and if needed, update the Firmware Updater.
    //

    Hi,
    I was just wondering how you were able to get the macbook to accept the update? I had to take mine to apple store and get entire keyboard and trackpad replaced in my macbook. They then told me to ignore the update cause they did not have any other keyboards to replace if it happened again.

  • I have a problem updating my AcrobatX ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen. MSI Error message: Ugyldigt drev: K:\  ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

    Acrobat X problem updating.
    ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
    MSI Error message: Ugyldigt drev: K:\
    ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
    I have uninstalled my AcrobatX and now This message appear when I try to reinstall:
    ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
    MSI Error message: Ugyldigt drev: K:\
    ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
    Is there anybody who know  how to solve it?

    Hi Patricia ,
    For error 2203 ,please refer to the following link.
    https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
    For error 1603 ,refer to this link.
    https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
    Let us know if this solves the issue .If required ,we"ll surely assist you further.
    Regards
    Sukrit Dhingra

  • HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

    When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
    Here's the cycle:
    I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
    Click Restore
    Extracting software…
    Preparing iPad for restore
    Waiting for iPad…
    Verifying iPad restore with Apple…
    (empty bar under the Apple logo…does not show any activity)
    “The iPad “iPad” could not be restored. An unknown error occurred (9).”
    Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
    I swapped out the USB cable to a new cable and get the same results.
    I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
    I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
    I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
    It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
    So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
    Any advice would be appreciated.
    Thanks!

    Hello jaybearden,
    Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
    Resolve iOS update and restore errors - Apple Support
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

    I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

    Sorry to bother you.
    I could find the answer after searching previous posts about this language problem.
    Had to change my language in AAM profile and then download PS CS6 again ( english version ).
    Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
    restart application and Voila.
    Greetz, Jeroen

  • Windows 7 update fails with error 8000FFFF

    I've got a Windows 7 x64 installation that I've had for around three months.  Everything has been fine and working up until a few weeks ago.  When I run Windows Update it finds updates and allows me to select them, but when I run the install it fails with error 8000FFFF.  Update used to work, but then suddenly quit.
    I've dug through tons of forum and web sites regarding this specific error, but they all of their solutions do nothing to fix my problem.  In frustration I decided to put in a spare hard drive and install Windows 7 from scratch.  I did that and the first thing I tried to do after logging in was updates and it failed for the same reason (8000FFF).
    I have the same situation with a Windows Storage Server 2008 x64 that I have as well.  It has been runing for about six months or more and updates were working fine.  Then update started failing for the same or some other reason about the same time.  On this machine I can start the update and see it report a percentage downloading the update.  It gets to about 5 or 6 percent and then fails.
    Is there some possible networking issue at play in my situation?  I have earlier Windows versions (XP, XP64, Svr 2003 and Svr 2003 R2) and updates work fine on those.  I know those are using a different mechanism, but I do not notice any other kind of networking issues from my house to the Internet.  I have not changed anything or any settings in my firewall at all.  Is there some specific protocol, port or something that has to work prefectly in order for the new Windows update to work? 
    All of my machines are pretty much Intel based.  Win7 box is a Core2Duo on an EVGA 680i motherboard.  The servers are Intel Xeons with Intel motherboards, chipsets and nics.
    Thanks for any advice and help

    Wow, suddenly I have the same bizarre error at 11% of downloading, then error #8000FFFF.
    Fix IT, registry keys and SoftwareDistribution folder cleaning, uninstalling previous updates, manual downloading of appropriate updates and attempt do install it and creating/deleting user profiles - don't work at all.
    Any new ideas?
    Thanks,
    Win7 x64 SP1
    Package KB2633873 failed to be changed to the Installed state.
    Status: 0x8e5e0408.Windows update "Security Update for Windows (KB2633873)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2633873-x64.msu"       
    Package KB2645640 failed to be changed to the Installed state. Status: 0x8e5e0408.
    Windows update "Security Update for Windows (KB2645640)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2645640-x64.msu"       

  • CC app manager update  failed with error code 50 after reaching about 35%

    Trying to update the CC app manager. The update is always very slow  (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

    Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks.  I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
    The user suggested fix that worked for me was:
    1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
    2) Started the creative cloud desktop app.
    3) The app said it needed to be updated. I hit the update button.
    4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
    5) Restarted computer in normal mode.
    6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
    So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

Maybe you are looking for