Update of Adobe Acrobat DC is hung up at 35% and has been that way for two days. How can I get it to update?
This is what has been going on for two days now... it is hung up and the update will not complete... how can I get it to download?
Hi,
Please refer to the thread below where this issue has been discussed:
Adobe Acrobat DC install stuck
You may also refer to the help document below:
FAQ | Adobe Acrobat DC
Regards,
Sheena
Similar Messages
-
I tried updating my ipod touch to iOS6 then an unknown error occured so i disconnected it an now it is stuck on the apple sign and has a loading sign and has been like this for 2 hours. what can i do?
My home button is also unresponsive and i have to press it really hard to make it work.Do you remember the the exact wording of the error message:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
my iPod appeared to be dead, i plugged it into my computer to charge and it said it needed to be restored. it updated it and now is stuck and my itunes says "waiting for iPod" and has been this way for hours. i've tried to hold down the home and power button and nothing happens!! my computere and itunes recognizes the iPod, but the iPod its self is completely unresponsive!! and helpoful hints?
See Here...
AMDS
http://support.apple.com/kb/TS1567 -
After updating to mavericks on my MacBook, the screen keeps saying "setting up your mac." It has been like this for hours! How can I make it go faster? It's has been like this for 4 hrs.
I don't think your mac is setting up. It's stuck.
I would:
hold the power button until it shuts down
unplug all peripherals
do a safe boot (restart and hold down the shift key until you see the apple logo).
If it starts up in a safe boot, then you can try restarting with a normal boot.
If it does not start with a normal boot, then you probably have some incompatible third party software. Likely culprits are:
MacKeeper
CleanMyMac
third-party antivirus software
any other "cleaning" or "optimizing" or similar third party "utilities".
A good place to start would be to uninstall any of those (while in safe mode) and then restart. -
Hi, I have an iMac that is about 2006/2007. We have enough memory and storage capacity, so I bought Lion 10.7 (we currently have 10.6.8 Mountain Lion). The reason we are updating is that we have a new printer (just purchased), will only accept 10.7 and higher.
The email with the redemption code was sent through, and that was all fine. But every time I go to actually redeem the code and get the software, it comes up with the message:
"This item is being modified. Try again later."
It's been like this for three days now, I've tried off and on.
The support phone numbers are fine, but they are closed, and would really like to get this resolved.
Any help/ideas would be most appreciated.
Thanks!Scornz: They have been saying the same thing for over a week...maybe longer. I submit that what we are being told is not what is actually happening. I would say more, but my last post was deleted because I "conjectured." Pardon-moi.
So let's think about what we do know. Apple is one of the largest tech companies in the world. They have access to whatever technology exists, and more. Does it make ANY sense that they would be having a problem like this...with these TWO software products...and it's taken more than a week to fix? Does it? What does that make you conjecture? -
I
As I open up Premier, it asks me for the sequence presets, which should I chose in this case? (DV 24p?, DV NTSC?, DVCPROHD?)
Skip the step of creating a sequence, import your footage
and create a matching sequence by doing this:
I don't know why you don't have MPEG2 in your Encoder.
This image is from CS5.
Premiere Pro CS5-CS6 Reference
(.pdf 12 MB download)
http://helpx.adobe.com/pdf/premiere_pro_reference.pdf -
I've downloaded Adobe acrobat standard Dc only to find out it's not compatible w/windows XP. How do I get a different version?
Hi vincelucy,
If you've purchased a previous version, you can download older installers from this page: Download Acrobat products | Standard, Pro | DC, XI, X (you'll need your serial number to complete the installation).
Best,
Sara -
I was updating my software on my iphone 4 and it crashed so it recovered it and i restored it from its back up. However I have lost all my music and my apps but not my pictures. How can i get my music back. I did not remove my phone from the computer until it had said it had finsihed.
Media and apps are not part of the backup. They need to be re-synced from your itunes library or re-downloaded from the store.
-
I recently updated my ipad and then I connected with my computer for sync, not realising that I had a new version of itunes with none of my apps. Now I have lost all of the apps and books etc, that I had prurchased. How do I get them back?
As long as the apps and ibooks are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519
-
In Acrobat, I wrote a script to turn fields gray if a checkbox was checked. How can I get it to reset to white (or clear) when the reset form button is clicked?
Thank you so much for your reply . . . but . . . I should have shared my original script with you -- it was a little more complicated than I led you to believer. I was triggering a group of text fields to become disabled as well as gray. Below is the original script so that when the checkbox is checked, it causes several "Co" fields to be disabled and gray.
// Mouse Up script for check box
// If checked, certain fields should be disabled
var f_prefix = "Co";
// Get a reference to all of the "Co" fields
var f = getField(f_prefix);
// Reset the Co fields
resetForm([f_prefix]);
if (event.target.value === "Off") {
// Enable the Co fields
f.readonly = false;
f.fillColor = color.transparent;
} else {
// Disable the Co fields
f.readonly = true;
f.fillColor = color.gray;
To recap -- my goal is to get those gray fields to revert to transparent if the form is reset. I'm willing to create my own custom "Reset Form" button but I'm not sure I understand how that would look. Wouldn't it be quite lengthy? I think I'm having a brain freeze -- can't figure it out! -
I have time machine saving onto two usb drives.
The total size of the files being backed up is 4.6TB.
Each external USB drive is 6TB. So I have 12 TB of space for Time Machine.
Why is time machine only updating one USB drive? (One drive has been the same for two weeks.)
I have selected both drives in the Time Machine settings panel.
My understanding was that it would do a full backup, and then incremental backups of changed files, getting rid of old copies as needed, and alternate between the two drives.
But it looks like drive A has one complete backup, dated two weeks ago, and drive B is the only one getting action.
There is a red icon on drive one that says the drive needs 120GB more space to do a backup -- which is strange since the whole backup set is only 4.6TB in size, and the drive is 6TB in size...You could try a clone instead.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Time Machine Versus Clones and Archives
Commonly Used Backup Methods -
ever since i updated to ios 8.3, my imessage has been on "Waiting for Activation" Please who can assist? i have reset the network settings and also have restarted the phone.
same problem here
-
Updated to iOS 7.0.4. Now a restrictions passcode has been set, not by me. How can this be fixed without resorting to factory restore?
Hi Mullan13,
Thanks for using Apple Support Communities. Restoring your device is the solution for this issue, but if a backup was made you can also use that after the restore. This article provides details on how to go about this:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
I realize it may not be the solution you were seeking but you should be back on track after performing these steps.
Cheers,
- Ari -
Hi when i was updating my itunes on my laptop our kid cacelled it and now i have no itunes any where .how can i get my itunes back HELP PLEASE ?
Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
I have 3 phones on one Icloud account. They have been this way for over a year. After an update last week one of the phones started getting messages for all of the other lines. We fixed this under the send and receive under settings. It was fine for a few days. Suddenly it started happening again. Yesterday after two hours on the phone I changed my apple id and it is still happening. Before that Verizon had told me to turn off my imessage when that happened I could not get any texts at all from other Iphone users.
Make 3 different iCloud accounts and use ONLY for iMessage. That will permanently fix your issue.
Maybe you are looking for
-
Blue Screen of Death - Smax4pnp.exe app error
When I boot my T61 I get the "Smax4pnp.exe app error" and then later get the BSOD with Invalid_work_Queue_Item or no character string like the previous. I ran MS Security Essentials and it found two or three Trojans & removed them. Any idea what is
-
Where does iPhone store backups in Mac and Windows?
Sorry I could not find the answer elsewhere. Where does iPhone store backups on Windows and Mac? Can the location be changed? Thanks!
-
Create new LSMW using Idoc for HR master Data
Hi Guys, I was wondering id someone could help me. I have started developing an LSMW, of which I have already created the Object. I have also created the Maintain attributes and I have supplied the Message Type, Basic Type and activated the IDOC inbo
-
Inherited JPanels inserted to GridLayout - panel size problem
Hello, I'm not sure if I implemented it correctly, however I'm trying to have different-sized JPanels inserted to GridLayout. JPanels are inherited from base JPanel class. Shortly: public class CMyBasePanel extends javax.swing.JPanel public class CPa
-
Hi there, I use windows 2003 server, oracle 10.2.0.4.0. My question is related to maintaing a standby database 1. Do we need to take RMAN full backup of standby database on a regular basis? At the moment I dont take backups of standby database. 2. I