Update of rffoca_t program

Hi Gurus,
I have a question regarding the rffo* classic payment program. I wanted to add more fields in the file that is going to be generated. However i am not able to find out how to do it like should i extend the reguh and regup tables or i should use a exit where in i call add the new fields. please help required ..
rgds
Edited by: SAPgopi on Apr 21, 2011 11:17 PM

Yep. Annoying the crap out of me. I'm on Windows 7, 64 bit and the airport utility can't find the express. It's stuck on "RESCAN".

Similar Messages

I have recently updated my CC programs to the latest version and now all of my files wont open by default into their respective programs, only if I open the program and go to file open and open the file from there. How can I fix this?

I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anyway

On Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
But there is a plugin for ID that makes this possible. Never tried it myself.
https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help-

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…

Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I have tried to update my itunes program. It was running great until I attempted the update now all I get is an error message that says "Itunes was not installed properly, Please reinstall itunes, Error 7 (Windows erroe 126)". What can I do to get my it

I tried updating my itune program. Now all I get is the following message "Itunes was not installed properly. Please reinstall itunes. Error 7 (Windows error 126). WHAT can I do to get back to where my itunes program is running again?
I have uninstalled the proram and tried reinstalling and get the same error message. The other error message I get is "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem". I have tried that twice with no luck. Can someone help me get my music back???

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT6030 I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is u

I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is updated

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

Is Adobe Acrobate Pro 9 still supported? Are the updates to this program being uninstalled by Adobe

Is Adobe Acrobate Pro 9 still supported? Are the updates to this program being uninstalled by Adobe

Hi Kent,
http://helpx.adobe.com/acrobat/kb/end-support-acrobat-8-reader.html may help,
Thanks!
Eshant

When I try to update my CC-programs to CC 2014 I get the message: Exit Code: 15. Why? I have OSX 10.9.4

When I try to update my CC-programs to CC 2014 I get the message: Exit Code: 15. Why? I have OSX 10.9.4

Exit code 15 installing | Mac OS X | CCM, CS6

Whenever I try to update my iPhoto program I get this error message "The product distribution file could not be verified. It may be damaged or was not signed."

Whenever I try to update my iPhoto program I get this error message "The product distribution file could not be verified. It may be damaged or was not signed."

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I have an Mac air 2011 and after install osx mountain lion when I do update to some programs like iMovie and iPhoto and make sleep mode to dowenloaded it doesn't dowenloaded in sleep mode it stop please help me

I have an Mac air 2011 and after install osx mountain lion when I do update to some programs like iMovie and iPhoto and make sleep mode to dowenloaded it doesn't dowenloaded in sleep mode it stop please help me

i guess you could put the aiport utility app on your iphone, click on the aiport express there, it will show you how many devices are connected to it and the mac addresses of those devices.

Recent unrequested auto-download of adobe 11 updates included mcafee program download...why??

Recent unrequested auto-download of adobe 11 updates included mcafee program download...why??

No idea why, but it's in this routine that it crashes...
/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewor k/Versions/Current/Plugins/PrintCocoaUI.bundle/Contents/MacOS/PrintCocoaUI
I've fixed this problem several times by downloading older versions of Safari, but EVERY time my computer updates, I have to manually download and install an old version and it's getting really tedious.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

I had an update from a program and now my screen turned black and i can't do anything i have an ipad mini. Any helps?

Help My ipad mini's screen turned black afther doing an update from a program can anybody tell me what to do?

Care to share your solution with the rest of the community?
It might help someone else down the road.

I updated my itunes program on laptop , reset like prompted, then itunes dissapears?

i updated my itunes program on laptop , reset like prompted, then itunes dissapears? what the **** did i update for?

I have the same problem, but not only won't iTunes 7 launch, but my HP Photosmart all-in-one printer (on my LAN) freezes, with buttons flashing and a cryptic error message, whenever I try to launch iTunes!
I have found that if I turn off my printer, then I can launch iTunes 7 and it works fine, but I cannot use the printer AND use iTunes at the same time.
Is this weird or what??? Anybody have any ideas on what might be causing this? HP printer support was no help.
HP Windows XP

HT4759 updated to Lion, from snow leopard after updating all necessary programs & system, recieved emails saying it was successful changing to icloud but can i access iclound No - nothing works! webmail & mail - also reset password.

updated to Lion, from snow leopard after updating all necessary programs & system, recieved emails saying it was successful changing to icloud but can i access iclound No - nothing works! webmail & mail - also reset password.

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint.

To Apple I'm buy MACBOOK PRO 13" on 20 JULY 2012 @ apple store fifth avenue Part Number MD101LL/A Serial number C0******DTY3 They say can download update free for program OS X Mountain Lion when arrived But when i download

To Apple
I'm buy MACBOOK PRO 13" on 20 JULY 2012 @ apple store fifth avenue
Part Number MD101LL/A
Serial number C0******DTY3
They say can download update free for program OS X Mountain Lion when arrived
But when i download why it charge to me...
I want my money back if not i want to return MACBOOK PRO 13" and will buy New One
Best regard
<Edited by Host>

If you registered your computer after June 11th, you were entitled to a free upgrade to Mountain Lion. See http://www.apple.com/osx/uptodate/.
If you went ahead an purchased ML before recieving your redemption code then you're just out $20. Not a big deal - you should have been instructed on how to get a redemption code for the OS X update.
Clinton

Formulas in Update rule active Program

Hi,
I would like to know whether is it possible to see the formulas applied in the update rule active program generated .
for exampkle: (IF TRANINDIC = 0, NET_VALUE,0).....This formula has been applied for a specific kefigure in update rule.
I just wanted to see the above formula in the update rule activer progrma...so is it possible to see....if it is possible please let me know some tips and tricks to check the same.
Thanks
Sujan

Hi,
In rsa1 open upadate rules. and in the main menu. check for option generated program under menu options.
you can get the program.

Update of rffoca_t program

Similar Messages

Maybe you are looking for