Update of RG1

Dear Friends,
We want to update RG1 register. We are doing it by J2I5. In the initial screen of J2I5 we enter the Excise Gr Start & End Date, opt for Select any register & check RG1 check box & Execute. We are getting a window which shows RG1 (Cross), that means sys has not updated RG1 register. Otherwise in case of RG23A we get RG23A (Tick), means updated, in the same T.Code i.e. J2I5.
So we want to know how to update RG1 register. Our sales process is VA41-> VA01-> VL01N-> PGI-> VF01.
Another thing that some time we want to attach a screen shot with our thread. Why isnu2019t it possible?
Plz help.
Thank you.

J1I5 will be used to Update RG1 ( with necessary Classification types in sequence)
J2I5 is used to extract the register & J2I6 to Print/download RG1.
More about RG1 updation, make a try to search in the forum.

Similar Messages

  • CIN: Items are not displayed while updating the RG1 Register using T Code:

    Hi Experts,
    Items are not displayed while updating the RG1 Register using T Code: J1I5.
    System is not showing any error message.
    Can any one explain to update the RG1 Register?
    Thanks
    Chandra

    Hi,
    dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
    In day to day bussiness the flow is as follows:
    Production - MB31 - to Unres stock
    Sales - VL02n - PGI - to customer - i.e out of unres stock
    Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
    and this will happen every day.
    hence dont use table as it is only for intial data upload i.e just before golive.
    Hope i am clear.
    krishna

  • Updation of RG1 register

    Hi,
    Once again I am putting this question.
    When I am trying to update the RG1 register with t.code J1I5,At the time of simulation,I am not able to simulate the some material document (getting the red tab against them).So that I am not able to update the RG1 register.
    What can be the possible resons that some document not simulating.
    I have maintained the J1iD after Creation of excise invoice.
    Urgent

    hi,
    this is because there is not enuf bal against the material, try by posintg some inward goods movement thru a PO or a manual JV in j1ih. then ur issue will be resolved.
    saurabh

  • Updation of RG1 register for make-to-stock material

    Dear Experts,
    Will you please guide me how to update the RG1 register in case of sales for make-to-stock materials?
    With regards,
    Jhelum Roy

    Read SAP help documentation [Update of Registers RG 1 and RG 23 (Part I)|http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm]

  • Updation of RG1

    Hi Friends,
    While updating RG1 in J1I5, once i enter all the inputs in the initial screen i am getting all the line items, once i select the line item & click on Simulate button that line item is turning into red actually it should turn into green right? i am not getting what exactly the error is?
    Please guide.
    Regards,
    Vijay

    Hi Vijay,
    Kindly go thru the below threads,
    RG1 updation
    Not Enough Balance for utilisation
    Re: real time scenario for pricing procedures
    Else
    Serarch forum with these key words,
    1) RG1
    2) Updation of RG1 register.....J1I5
    3) rg1 difference
    4) Issue In RG1 Register
    5) issue In RG1 Register
    Thanks,
    Swamy H P

  • Updating the RG1 register.

    Hi..Gurus,
    Iam updating the RG1 register like this. In my company we create sales order. After that the PP people do the Sales order to process order and put the stock into the unrestricted stock.
    Then we do delivery and billing and excise invoice.
    After creation of the excise invoice iam using the J1ID here in the Chapter Id and Material combination iam putting the material as RG1.after that iam using the T.code SE16 and in the table j_2irg1bal iam maintaing the some quantity in total receipts+issues field.
    After that iam doing RG1 updation ,Extraction.
    My question is is my process is correct or not? if we follow the process any problems come in the future.
    Gurus please correct me.
    regards,
    jyothi.

    Hi,
    dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
    In day to day bussiness the flow is as follows:
    Production - MB31 - to Unres stock
    Sales - VL02n - PGI - to customer - i.e out of unres stock
    Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
    and this will happen every day.
    hence dont use table as it is only for intial data upload i.e just before golive.
    Hope i am clear.
    krishna

  • Maintain/update in RG1 register

    Dear  Guru,
    If  the finished good return from customer to business then,how to maintain/update in RG1 register.
    Regards,
    Kumar

    Hi Kumar,
    The RG1  Register is the daily stock account register of finished goods and if the finished goods return from customer to business then that finished good is considered as input material and RG23A or RG23 C register will get update.
    As i case of return from customer we have to do PGR(post goods receipt) with movement type 655 and J1IH manual excise adjustment.
    Regards
    Gaurav M

  • Assesable value is not updating in RG1

    Hi frnds,
    Please solve this prob. which I am facing.
    i am selling finshed goods.
    RG1 register is updating very well except the assesable value on which the excise is levied.
    Please guide me ,Is there any customizing setting are there ?
    I am using Jass condition typein my pricing procedure for assesable value.
    TaxINN is the tax procedure I am using.
    Please help me
    Sunil

    Why u maintained J1ID for TAXINN !
    J1ID only for TAXINJ
    In taxinn system caliclates excise duty based on , What is the base value in the sales pricing procedure for JASS.so it never consider assessbul value in J1ID..

  • Updation of rg1 register twice on 641 mov type

    Hi,
    We have a scenerio, where finished product will be consumed for assembling the another product,
    for this the scenerio is STO to own plant through Sales,
    When I am updating RG1 register through J1I5 transaction with mov type 641 against STO to own plant
    RG1 entry is updating twice, one as receipt in the plant and once as Issue from the plant with value.
    Pls. provide the solution how to control this to enter only once.
    regards
    Ramesh

    Possible options to get RG1 updated twice in case of STO-
    - Check whether you are using "One step procedure" in STO
    - Check movement types assigned to RG1 in CIN Settings ( i guess, 641/101 movement types assigned to RG1)
    - Should not maintian 101 assigned to RG1- bcoz inflow of Materials will not update RG1,
    try n revert

  • Incorrect Opening stock & closing stock updation in RG1 Register

    Hi ,
    It's regarding Rg1 register update. As our cut-over date was 31.08.2010.
    After extracting  for the month of sept. , when no opening and closing stock
    reflecting in it, than we realize it .Afterwards we maintain
    the  closing balance for 31.08.2010 in the table and try to
    re-extract it,but there is no change in the sept.figure.After extracing for
    October month,we get the values in the column ofopening stock and
    closing  stock in RG1 register. But for some material it is showing
    negative stock and for some as Zero, though physically it is present.
    What i  found in Rgsum table that the stock quantity are not correct,
    it seems that september stocks are not updated in the table also in
    J_2irg1bal table ,only october stock are reflecting.
    looking forward for your valuable inputs.

    Hi,
    All the Receipts And issues have been updated in J1I5 for september month.What i also found that in table for
    RG23 summary of receipt and issue , the quantities has been updated for the particular month also in RG1
    Excise details table all the entry are there for september month.The only problem is on Opening and Closing
    balance table for Rg1. here in this , there is no entry for September month,but for october it is there.
    How to correct this.
    Regards
    sujeet

  • To Update the RG1 and RG23 Registers.

    Hi Frnds,
    Currently in our RG1 , RG23 registers are getting updated on transaction basis , now after doing to the physcial checking of the stock i had found some discripencines in the stock , now i am going to update the stock using physical inventory option ( 701 Mvt type ) , then i want my RG1 and RG 23 register also to get updated , how to do this ?? What are the Tcodes to update the same ??
    Regards
    rakesh

    HI,
    Check in customizing, if you have defined relevant movement types for update of the registers.
    Logistics - General > Tax on Goods Movements > India >Business Transactions> Incoming Excise Invoices > Specify Which Movement Types Involve Excise Invoices >
    Regards,
    Deepak Gupta

  • Error in updation on rg1 register

    Hi
    I created a excise invoice for factory sale. While updating the register
    J1I5 Update the RG 1 and Part I registers
    it is not simulating. Why is there any customization setting i have to do or what?
    kindly help in this matter
    regards
    chakri

    In the case if updation is for first time:
    RG1 Updation
    The sequence is like this:
    1. In SE16, enter Table name: J_2IRG1BAL, and click on Create. Enter the material Number and 'P' in Material form (Loose/Pack indicator) and click 'Save'. This step is to be done only for the first time.
    2. Do your Initial Stock entry in MB1C, movement type 561
    2. Go to J1I5, select Posting Date, Document Year and 'ROP in Classification (Receipt from outside under any other provision). Click on Create icon (Register entry)
    4. Go to J2I5 and extract the RG1 Register. You must get a green checkmark.
    5. After doing the PFI, go to J1I5, select Posting Date, Document Year and Classification 'IDH' (For domestic sales) or 'IDE' if the first removal is for Export Sale. Based on the accounting document generated during PGI (MB03) the RG1 Register gets updated with the removal for Outbound Delivery.
    6. Reextract the RG1 register in J2I5. You must get a green checkmark.For the RG1 Register printout, go to J2I6, select the option, 'Script Form' and hit 'Execute.
    All this was in OSS Note: 373001.
    Regards,
    Rajesh Banka

  • Updation of RG1 register.....J1I5

    Dear Friends,
    I need to update RG1 register.....J1I5
    1. How should I start with.....Do I need to update first with classification RMA /ROP?
    2. What's the relevance of other classifications like IDH/IDE/IWE/IWT/IWO?
    Cheers

    Hi,
    In case you have updated your removal entries using any particular classification type, whether its IDH/IWE or any other one...there is no way that you can rectify it. Entries in RG1 tables can happen only once and without any option for modification, that is the reason that simulation option has been given for excise register entries.
    You can continue with these entries as the total removal qty of stock, opening stock, closing stock and the respective excise duty amount will match correctly. Going forward you need to be careful when doing register entry.
    Rgds,
    Antima

  • Red indicator in J1I5 updation for RG1

    Hi,
    While updating RG1 with Classification IWO, in stimulation I am getting RED indicators for a particular material document of Transfer posting.
    Please advice me how to overcome this problem.
    Thanx in advance.

    Hi Rithvika,
    Thanks for your inputs.
    I have checked stock in register, there is enough stock of the material and all the receipts have been updated.
    I ran same transaction in QAV and it is working. but in production for this particular material document I am getting red indicator.
    The transfer posting is done from one material to another.
    any other reason? Also please advice how this red indicator cna be changed to green so that it can be updated.
    Thanx,
    Anup

  • SECess is not getting updated in RG1 register

    Dear  All,
    I have applied the Note 1034308 ( Budget 2007 - 08 changes for J1I5 ) but the sec cess  entries are not getting populated in the RG1 register.
    which are the settings are required to be completed.
    kindly guide.
    Deepak

    Check out some corrections are missing or check with abaper that he added the field in the program and u need to  to check the settings in the excise group of that plants
    Reward points helpful
    Regards
    Sriram

Maybe you are looking for