Update of the BT Network - Is this correct?
Is there a copper DP after the copper leaves the cabinet?
Is there a splitter in between the Aggregation Node and Fibre DP for FTTHoD?
Last but probably not least am I missing anything?
Many Thanks Again.
Agg node is for fibre not copper.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.
Similar Messages
-
Revision: 670
Author: [email protected]
Date: 2008-02-26 18:14:40 -0800 (Tue, 26 Feb 2008)
Log Message:
-major update to the mpl packaging target - this will now package up the correct files that are mpl
-this target is not called within this build script. to build this pkg use: ant mpl-package
Modified Paths:
flex/sdk/branches/3.0.x/build.xmlOne small thing - I believe the reason why some of my drivers were messing up was because they were SP2 specific; the older drivers and the ones that were compatible with both SP and 2 were fine.
As soon as I did the reinstall, all of the drivers/programs that were not working, worked (aside from the ones that I mentioned in my attached email above).
So, if after uninstalling the old SP2 you are told that loads of drivers/programs will not work, fear not - most should fix themselves upon installing the new SP2.
G -
Face Time was unavailable, even in SETTING= PHONE, when I updated to the new network settings.
Face Time was unavailable, FACE TIME switch is not even showing in SETTING=>PHONE, when I updated to the new network settings.
There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content. -
When trying to use my banking apps I get the error "Network Required This application requires an active Internet Connection. Please try again". This happens with two different apps from two different banks. One of them works occasionally and have not figured out why. I have cell signal and I am on a strong WiFi network. Same thing happens when I turn off the WiFi too. I have tried uninstalling and re-installing the app with no improvement. I can't seem to find any setting that would cause this. Does anyone have any suggestions?
I can access the internet just fine in the browser and i can use any other app i have.
Sent from my Verizon Wireless 4G LTE DROID -
The update from v11.1.3 to 11.1.5 using the iTunes internal updater hung about 80% through the install. I had to kill it and reboot before I could uninstall the existing version since I did not know what state the program was in. When I started the reinstall using the 64 bit version, it showed a default installation directory of "Program Files (x86)". Is this correct? I know iTunes had something installed in the 64 bit "Program Files" directory.. Before I procede, I want to be sure that it is not going in the wrong place. I have a Win 8 PC.
Thanks,
JohnDYes... that is correct.
On 64-bit machines iTunes installs various components into the following folders (or localized equivalents):
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iPod
C:\Program Files\iTunes
C:\Program Files (x86)\Apple Software Update
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple
C:\Program Files (x86)\iTunes
tt2 -
Dear all,
If my server is enabled for the remote desktop connection, then the users on the local network can access my server IIS services by entering the IP address of my server in the IE (http/https) on the local network only.
I went to control panel>>system>>Allow Remote desktop Connection>>with network level authentication.
Now If my team wants to access this server not by opening the Remote Desktop Connection, rather by entering the IP address of my server on the IE and access the resources offered.
Is it possible by this way,
Or is there any other method to do so.
Regards,
Ahmed3. My web Developer is installing an application on the server for our department team. To test this application running, he wants to access this application through the local machine from browser (rather than logging in through the remote desktop connection).
4. He wants this application to run on the local network only.
5. He wants me to do some setup, that he must be able to enter the IP address of the server in the browsers address bar on his local machine and test the functionality of his application on the local network.
If this is the requirements of the developer, I guess he wants you to configure IIS.
You can do a test, whether IIS is working properly.
Log on to server, enter https://localhost or http://IP_address_of_the_server don't know whether some ports are configured in order for your IIS to work.
check out this youtube video:
https://www.youtube.com/watch?v=tNAdv1EPj-I
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes -
I was just in the Live Chat, is this correct?
First I asked if changing plans would land me on another 2 years contract....said no
Then I was reading the very fine prints under the MORE plan to find out about a $175 cancellation fee, so I explained to her that my contract expired 6 months ago and question her,- if I decide to leave Verizon (no more contract) do I still have to pay the $175 fee?
SHE SAID "YES" if I want to cancel the line I will be charged $175.....is this correct? if it is this is the biggest rip-off ever !READING the entire post and understand is essential before replying....as I said, my contract EXPIRED 6 months ago, still if I just want to tell Verizon to cancel my account and number, I still have to pay $175........that is what the live chat girl told me....seems strange to me, hence my post
Comment edited as required by the Terms of Service.
Message was edited by: Admin Moderator -
I received a message saying I must change my iCloud pass code keychain due to changes in the server. Is this a hoax?
Dang! And if I already did before thinking it might be a scam, what can I do about at this point? I did just reset my password again after realizing it might be a scam, but is that sufficient and is there anything else I should look into to see if any damage was already done? Thanks.
-
I cannot print any email or web pages over a wireless home network. I know that I can print my files over this network, just not anything from the web or emails using Firefox. I am using Windows 7 and printing to an Epson.
== This happened ==
Every time Firefox opened
== when I set up the wireless home network.The most likely reason for this is that the wrong printer is chosen in the File->Print window.
In Firefox, go to File->Print and click the dropdown box with printer names. Ensure that the correct network printer is selected, then try printing again. -
My 33.03 home page has a large flame instead of the normal logo, is this correct
the correct logo will appear upon start up and then it quickly changes to a different logo quickly... the same original with a much larger flame ... i did make a snapshot of it... but i don't know how to paste it to this message.. I'm concerned that i'm being redirected.. Do you have a different logo for the firefox 33.03 version?
That logo is one of the snippets that are used on the about:home page.
If you prefer not to see the snippets on the about:home page or otherwise experience problems with a snippet then you can set the <b>browser.aboutHomeSnippets.updateUrl</b> pref to an empty string on the <b>about:config</b> page.
Delete the <b>storage\persistent\moz-safe-about+home</b> folder in the Firefox profile folder with Firefox closed ("3-bar" Firefox menu button > Exit/Quit) to remove snippets stored in IndexedDB and make Firefox use a default snippet set.
You can reset the browser.aboutHomeSnippets.updateUrl pref via the right-click context menu to the default value to re-enable the snippets and make Firefox recreate the moz-safe-about+home folder.
You need to close and restart Firefox after changing the value of the browser.aboutHomeSnippets.updateUrl pref.
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder) -
No longer seeing the HTML Validator on bottom bar nor can I find it in any menus
If it was working in Firefox 4 it should work in Firefox 5
You can force 5.0 "compatibility" with the "[https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Compatibility Reporter]" extension, or with [http://kb.mozillazine.org/Extensions.checkCompatibility extensions.checkCompatibility] using about:addons.
But that would not be a good solution go to the addons site
https://addons.mozilla.org/en-US/firefox/addon/html-validator/
Look just above change summary in the reviews it tells you to use
For those with Firefox 5.0, a compatible version 0.9.0.6 is here: http://users.skynet.be/mgueury/mozilla/new_upgrade4.html
which the author's site, but if you click on "view all versions" at the bottom of the addons page you will see the author has submitted it and you pick it up as experimental. -
My battery life for my 5S is very short since updated to the 7.06. This is common and can I go back to the previous software?
lolo2358 wrote:
My battery life for my 5S is very short since updated to the 7.06. This is common and can I go back to the previous software?
Nope, it's not common at all. Why do you believe it to be 'common'?
And no, you cannot downgrade your iOS. -
I installed the new numbers on the imac.
I updated a simple spreadsheat.
Tried to open via icloud on ipad-
Apple suggest to update to the new numbers. This is not aviable for the ipad 1.
1) Why Can Ipad 1 users not open icloud docs created by the new numbers on the mac ?
2) What's the use of mobile devices when they don't work
3) Can I open this docs via a google application ?Drag...
Where did you get your copy of numbers on the mac? You best go back to your old version of numbers on your mac.
Perhaps it's something to do with icloud. try dropbox. Try running the spreadsheet through NeoOffice calc on the Mac.
It's the world of software. When you use vintage stuff, you need to get more creative or spend money on an upgrade. Apple is lacking in the legacy world.
Now you be the time to come up with a backup plan for your mac.
Robert -
I was told a number cannot be blocked on the iPhone 3. Is this correct?
I was told a number cannot be blocked on the iPhone3. Is this correct? If it can be done...how do I do it?
Only your carrier can block a number for you.
-
Office 365 Pro Plus - updates from the internet
Hi All
I've used the Office deployment toolkit to download Office 365 Pro Plus to a local file server, and have now packaged this up within SCCM 2012 for deployment to clients.
In my configuration.xml file i have the following set for updates
<Updates Enabled="TRUE" />
I understand that this setting allows for updates, and client will download them from the internet.
Is this correct?
I am concerned that the Office 365 source files i downloaded are a few months old now, so will be out of date and i am relying very much on my deployed clients to be downloading updates as expected. Do i need to do anything else?
Thanks<Updates Enabled="TRUE" />
I understand that this setting allows for updates, and client will download them from the internet.
Is this correct?
That's correct, with Updates element configured as "TRUE", the Click-to-Run update system will check for updates from the CDN server automatically. So with this configuration, you will always be up-to-date:
http://technet.microsoft.com/en-us/library/jj219426.aspx#BKMK_UpdatesElement
Deploying with an old build should be no problem here, but why not re-download a newer build with ODT (Office Deployment Tool). That should not take too much time and will definitely reduce the network bandwidth consumption when Office 365 updates itself
from each client after the deployment...
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Maybe you are looking for
-
Error while transporting the Vendor in MM-SUS
HI We are implementing SRM server 5.5 and follow a MM-sus scenario. We were able to transport the vendor to SUS via BD14. but now we are reciveing an error - An error occured within an XI interface: Exception occurredE:BBP_BUPA:060 -Error while tryin
-
I'm using a mid 2014 13" rmbp. I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?
-
Qosmio X870-116: usage of Intel / nVidia GPU on internal / external display
Hello, I have a Qosmio X870-116 which have 2 video cards, a Intel on board and a Nvidia more powerfull. My probleme, I don't how I switch my display on the Intel card and I see my Nvidia only for the external display. Some one have an idea to switch
-
I used to have the color picker tab in the toolbar on the right (above the adjustments and layers tabs, now I have a different color selection tool that has a color strip, with the RGB sliders above it. I want to reset it to the color picker that had
-
Security Update 2010-001--- So secure I lost Admin Access!
I am running a Snow Leopard Server on a Mac Mini (I bought into the dual 500GB model) to host some documents and act as a small cross-platform dropbox for any kind of files that need to be shared over a biomedical research-related network. A little o