Update on 10.6.8 fails due to digital signature on update is missing

wanting to install the Parallels version 10 and it won't work on 10.6.8 version of my Mac OS so I learned how to go to the software update which indicates an update is available. When I go ahead and load the update it runs fine and then stops with a message that the Macbook Pro EFI Firmware Update can't be saved. It says the digital signature on the update is missing or invalid.
I don't know if the digital signature is on my computer or the update? I would upgrade to a more recent version of the OS but don't know what will work.
Can anyone help?
Dan

Parallels 10 isn't compatible with 10.6 according to the web site.
Mac Requirements
Hardware:
A Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor (Core Solo and Core Duo processors are no longer supported)
Minimum 2 GB of memory (4 GB of memory is recommended to run Windows 7 in a virtual machine or if your host OS is Lion)
About 850 MB of disk space on the boot volume (Macintosh HD) for Parallels Desktop installation
About 15 GB of disk space for each virtual machine
Software:
OS X Yosemite 10.10 or later
OS X Mavericks 10.9.4 or later
Mac OS X Mountain Lion 10.8.5 or later
Mac OS X Lion 10.7.5 or later
Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Do a backup before installing.
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable USB stick to install using this free program.
Bootable USB Flash Drive – Diskmaker X
Mountain Lion
Note - Mavericks is no longer available.

Similar Messages

Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store

Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store error 306. I am using windows 7.

(Apologies for butting in, wha.)
now older version is not able to connect to itunes store error 306. I am using windows 7.
If you still get the 306 after updating to 10.6.1.7, perhaps try the following user tip:
iTunes for Windows 9.0.x: Error 306

I have 4 applications that needs updating, but when downloading it fails. what can I do to update.

I have 4 applications that needs updating, but when downloading it fails. what can I do to update.

Are you trying to update only that one app or more that one app (via Update all)? You have to log into the account that purchased an app to update an app. If you have apps purchased by more than one account you have to update tem one at a time until the remaining apps were purchased from one account.

UPGRADED 10.4.11 ON MACBOOK PRO TO 10.5, NOW UPDATES TO 10.5.8 WILL NOT SAVE, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS.

UPGRADED 10.4.11 ON MACBOOK PRO INTEL TO 10.5.1 (FAMILY PACK VERSION), UPDATES TO 10.5.8 WILL NOT SAVE DUE TO, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS? CAN I UPGRADE TO 10.6.1 WITHOUT SAME ISSUE.

Well, not sure if having the disk in a firewire case or over a network would have made a difference.
The solution of making a disk image as in article http://support.apple.com/kb/TS2664 was what worked for me.
After, mounting the disk image the Migration Assistant completed without errors. So far everything seems to be working like it did on 10.4.11.

Acrobat 9,10 failing to validate digital signature while Acrobat 8 validating it.

I am facing an issue while validating a digital signature. I applied a certified signature with “Annotation, form fill-in, and digital signatures” but
when I apply Redaction “find and permanently remove” on a digitally signed document, Adobe Acrobat 9 and 10 complains that signature is Invalid But Adobe 8 is validating it. I have analyzed that Adobe Acrobat applying Redaction in append mode and original content of signature remains unchanged after Redaction.
Can someone let me know what should be the actual behavior?
Why Adobe Acrobat 9 and 10 failing to verify the signature even Adobe Acrobat keep enable Redaction which means it is allow to apply in a certified signed document with “Annotation, form fill-in, and digital signatures” option.
Prompt responses are greatly appreciated!!

When you sign, you should see where you can select the signature appearance name from a dropdown in the dialog.

Cannot upgrade software on sensor due to digital signature update file

Attached is a jpg of the error message when trying to apply update through IDM for the latest version:
IPS-SSM_20-K9-sys-1.1-a-7.0-6-E4.img
I've downloaded the image twice now from Cisco. I've done a token reboot but that didnt help.
I did apply the recovery image right before this with no issues.
Any ideas?
Thanks,
J

You've experience a very common area of confusion.
There are multiple different file types of the same version.
Some of which can be applied through IDM and CLI, and otherwise which can only be applied through other methods.
Basic Types:
System Images
Recovery Packages
Uprgade Packages
System Images have "-sys-" in the filename and generally end in .img.
These files can Not be installed through IDM or the CLI.
These files will erase the entire compact flash and install a completely new image on the system.
These files are generally only used when trying to get back to an Older image, or when you believe that the current image on the sensor has been Corrupted.
They are not recommended for upgrading as the configuration of the sensor will be completely removed during erasing of the compact flash.
They are installed through either ROMMON (on appliances), from the hw-module recover command of the ASA (on ASA IPS modules), through the bootloader (on AIM and NME router modules), or through the maintenance partition (in the IDSM2 Cat 6K module).
In your case it was a System Image you were trying to install through IDM, which is not allowed.
Recovery Packages have "-r-" in the filename and end in .pkg.
They will re-image the Recovery partition of the sensor.
They are installed using IDM or the CLI upgrade command. (.pkg files work with the Upgrade command)
The "recover" command on the sensor can then be used to boot to the Recovery Partition and re-image the Application partition to that version.
The "recover" can be done from a remote box through an SSH connection to the sensor. Unlike System Images which often require a Console connection or connection to the hosting device.
Recovery Packages are recommended when you believe that the current image on the sensor has been Corrupted.
They can often be used for Downgrading to an older version, but this is not officially supported (and will sometimes fail, if it fails then you need to use a System Image instead).
Upgrade Packages come in different types.
Major, Minor, and Service Pack upgrade files do not have a designator in their name, and usually just have the platform and version.
Signature Updates have "-sig-" in the name.
Engine Updates have "-engine-" in the name.
All Upgrade Packages end in .pkg.
Upgrade Packages can be installed using IDM or the CLI upgrade command.
In your situation you want to download the Upgrade file for 7.0-6-E4 instead of the System Image file.
Because the SSM-20 has the common architecture it will use the standard upgrade file that does not list the platform name.
The package you want is IPS-K9-7.0-6-E4.pkg.

Installation of *.pkg fails to due to invalid digital signature

I am a facing a strange issue, installation of quite a few pcakges downloaded from known/trusted sites fails due to invalid signature. To name a few, MS Silverlight, Google video chat pluging and GNU Emacs.
Please see the attached image for error message when I tried to install google chat pkg. It is strange that, digital signature verfication fails every single pacakge. Any clue what is wrong and how can this problem be resolved.
TIA

@XeniCraft
Thanks for thed detailed response, I tried all the workarounds you suggested, but unfotuantely none worked. I tried from the sheel and here is the what I get.
sh-3.2# installer -allowUntrusted -pkg Google\ Voice\ and\ Video.pkg -target / -dumplog
installer: Package name is Google Voice and Video
Feb 26 14:46:06 xxxxx-mac installer[81157] <Debug>: Product archive /Applications/Google Voice and Video.pkg trustLevel=0
installer: Installing at base path /
Feb 26 14:46:07 xxxxx-mac installer[81157] <Debug>: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Feb 26 14:46:07 xxxxx-mac installer[81157] <Debug>: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Applications/Google%20Voice%20and%20Video.pkg#Google_Voice_and _Video.pkg
Feb 26 14:46:07 xxxxx-mac installer[81157] <Debug>: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Applications/Google%20Voice%20and%20Video.pkg#Google_Software_ Update.pkg
Feb 26 14:46:07 xxxxx-mac installer[81157] <Debug>: Set authorization level to root for session
Feb 26 14:46:07 xxxxx-mac installer[81157] <Debug>: Will use PK session
Feb 26 14:46:07 xxxxx-mac installer[81157] <Info>: Starting installation:
Feb 26 14:46:07 xxxxx-mac installer[81157] <Notice>: Configuring volume "Macintosh HD"
Feb 26 14:46:07 xxxxx-mac installer[81157] <Info>: Preparing disk for local booted install.
Feb 26 14:46:07 xxxxx-mac installer[81157] <Notice>: Free space on "Macintosh HD": 709.81 GB (709811752960 bytes).
Feb 26 14:46:07 xxxxx-mac installer[81157] <Notice>: Create temporary directory "/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T//Install.81157TWiLjv"
Feb 26 14:46:07 xxxxx-mac installer[81157] <Notice>: IFPKInstallElement (2 packages)
Feb 26 14:46:07 xxxxx-mac installer[81157] <Debug>: Using authorization level of root for IFPKInstallElement
Feb 26 14:46:07 xxxxx-mac installer[81157] <Error>: Failed install preflight: Error Domain=PKInstallErrorDomain Code=105 "The package “Google Voice and Video.pkg” has an invalid signature." UserInfo=0x7fdf0a26e100 {NSUnderlyingError=0x7fdf09444730 "CMS signer status is not valid", NSURL=#Google_Voice_and_Video.pkg -- file://localhost/Applications/Google%20Voice%20and%20Video.pkg, PKInstallPackageIdentifier=com.google.pkg.GoogleVoiceAndVideo, NSLocalizedDescription=The package “Google Voice and Video.pkg” has an invalid signature.}
Feb 26 14:46:07 xxxxx-mac installer[81157] <Error>: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)

Software Update - digital signature incorrect

I have several update packages that were consistently reporting the error:
*The update "xxxxxxx" can't be saved.*
The digital signature for this package is incorrect.
The updates are:
iLife Support 9.0.3
Java for Mac OS X 10.5 Update 4 1.0
Safari 4.0
Several other updates (eg. recent iTunes and QuickTime) downloaded and installed OK.
I tried all of the following to no avail:
Repair disk permissions
Reinstall 10.5.7 combo package manually
Delete Software Update preferences & cache files
Multiple restarts
Finally I tried running Software Update under a fresh admin account and they downloaded OK. (Different issue that the Java Update later said it couldn't install).
So seemingly this is related to something in my usual admin account. Does anybody know what other preference files I should look to delete, or any other hidden setting that is affecting the digital signature checking?

I tried all of the following to no avail:
Repair disk permissions
Guess Carolyn didn't notice this.
This was happening fairly frequently about a month ago when 10.5.7 came out. The Apple servers were overloaded apparently and some incomplete downloads occurred so some type of checksum prevented running the update. Waiting and downloading later seemed to be the best solution.
http://discussions.apple.com/thread.jspa?messageID=9456350&#9456350
So seemingly this is related to something in my usual admin account. Does anybody know what other preference files I should look to delete, or any other hidden setting that is affecting the digital signature checking?
Perhaps by the time you did all the troubleshooting steps, if you tried it from the original admin account it would have downloaded correctly.

Software update-"incorrect digital signature"

I've used software update many times. Today, when attemting to use software update I get the following error message:
"the digital signature for this package is incorrect. the package may have been tampered with or corrupted since being signed by apple"
how do I correct this situation so software update will work correctly?
thanks,
pete
Mac OS X (10.4.10)

Since we don't know where the O.P. is located or why the digital signature is incorrect, I suggest taking the added precaution of verifying the SHA-1 Digest for at least the first of the manually downloaded updates if that method of obtaining them is used.

During an update of the applications on the BlackBerry smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatis

I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
Issues 1) playbook wont connect to desktop manager anymore
2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account.
3) my Phone when connected to desk top software shows the calendar as read only
4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies."
I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!!
someone please help me. !!
I know you are going to ask I have updated everything last time and it is all as update as it can get.
As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughts

Did you try to eboot the your PC or laptop where your device is connected ?
I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked

Adobe update process fails due to Error 130200. solutions please

adobe update process fails due to Error 130200. solutions please. Shyam

Is there anything else beside the number 130200?
Try downloading the update from http://www.adobe.com/downloads/updates/
If you still need help, please tell us your operating system details.

My ipad3 is at iOs 7, i'm trying to download update 7.0.2 I keep getting failed due to error like 9 times now. My mini, my two iphone 4s, no problems. What can I do about my ipad3?

ipad3 running iOs 7 trying to update to 7.0.2 keep tting failed due to error like 9 times. Updated iPad mini and 2 iPhone 4s, no problem.
Whats up? And what can I do to update?

Try and update with iTune (computer)

[SOLVED] update zfs fails due kernel version

$ uname -v
#1 SMP PREEMPT Sun Jun 8 10:08:38 CEST 2014
and
$ sudo pacman -Syu
:: Synchronising package databases...
core is up to date
extra is up to date
community is up to date
demz-repo-core is up to date
demz-repo-archiso is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: spl-git: requires linux=3.14.6-1
:: zfs-git: requires linux=3.14.6-1
As I have the required kernel version, I'm puzzled why pacman couldn't do the update.
Please enlighten me.
Last edited by theking2 (2014-06-22 07:54:43)

@Xi0N
With spl{,-utils} and zfs{,-utils}, upgrading leads to circular dependencies. This can be worked around by always building the packages in a chroot, but it is a bit more work than a normal module add on from the AUR.
But while demizer's repo is super duper convenient, he is human and doesn't always get to updating the packages as soon as the new kernel drops to [core]. So from time to time, you will have to patiently wait for the unofficial repo to be updated before you can update the linux package. That said, I am pretty sure he versions the dependency on the linux package, so I don't think that you can install the new linux package and then end up with a non-working filesystem. Rather, the attempt to upgrade the linux package will fail due to unmet dependencies.
Edit: As a disclaimer, it has been a while since I have played with zfs. So while I think this information is accurate, things may or may not have changed.
Last edited by WonderWoofy (2014-06-26 23:27:17)

Software update always fails due to "unknown error"

When I attempt to install software updates on my Macbook Air the process always fails with an error message that says "unable to install due to unexpected error" (or something like that). Any ideas how to fix this problem? I've found some references to this problem in the discussions but the proposed fix didn't work for me.
Bruce

Nov 12 10:37:29 Bruces-MacBook-Air Software Update[986]: JS: 10.7.4
Nov 12 10:37:30 Bruces-MacBook-Air diskmanagementd[1006]: DM ->T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: inHostDiskUDS=0x10ad36c20=disk0s2=Macintosh HD inWhatStr=RecoveryInfoBaseSystemVersion
Nov 12 10:37:30 Bruces-MacBook-Air diskmanagementd[1006]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did get booterRecoveryUDS=0x10ad36ae0=disk0s3=Recovery HD
Nov 12 10:37:30 Bruces-MacBook-Air diskmanagementd[1006]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did mount nobrowse; MP=/Volumes/Recovery HD OMS=0x7fdf6a5067f0
Nov 12 10:37:30 Bruces-MacBook-Air diskmanagementd[1006]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: getting dict from file=/Volumes/Recovery HD/com.apple.recovery.boot/SystemVersion.plist
Nov 12 10:37:30 Bruces-MacBook-Air diskmanagementd[1006]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: got dict (or NULL=will return err): oooInfoDict=0x7fdf6c006f00
Nov 12 10:37:30 Bruces-MacBook-Air diskmanagementd[1006]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did if-needed-best-effort unmount
Nov 12 10:37:30 Bruces-MacBook-Air diskmanagementd[1006]: DM <-T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: retErr=0 outInfoDict={
        ProductBuildVersion = 11E2702;
        ProductCopyright = "1983-2012 Apple Inc.";
        ProductName = "Mac OS X";
        ProductUserVisibleVersion = "10.7.4";
        ProductVersion = "10.7.4";
Nov 12 10:37:30 Bruces-MacBook-Air Software Update[986]: JS: 10.7.4
Nov 12 10:37:31: --- last message repeated 1 time ---
Nov 12 10:37:31 Bruces-MacBook-Air Software Update[986]: JS: Firmware is up to date.
Nov 12 10:37:31 Bruces-MacBook-Air Software Update[986]: JS: model = MacBookAir5,2
Nov 12 10:37:31 Bruces-MacBook-Air Software Update[986]: JS: 10.7.4
Nov 12 10:37:37: --- last message repeated 4 times ---
Nov 12 10:37:37 Bruces-MacBook-Air Software Update[996]: Acquired Lock: 501, 986, 0
Nov 12 10:37:37 Bruces-MacBook-Air Software Update[996]: Releasing Lock: 501, 986, 0
Nov 12 10:37:41 Bruces-MacBook-Air Software Update[986]: Calculated need 5167.634 MB; 91316.322 MB free; 91316.322 MB available with MTM reclaim
Nov 12 10:37:50 Bruces-MacBook-Air Software Update[996]: Acquired Lock: 501, 986, 0
---- download, install and reboot started here -----
Nov 12 11:12:15 Bruces-MacBook-Air Software Update[986]: Calculated need 3686.898 MB; 89835.094 MB free; 89835.094 MB available with MTM reclaim
Nov 12 11:12:15 Bruces-MacBook-Air Software Update[996]: Releasing Lock: 501, 986, 0
Nov 12 11:12:18 Bruces-MacBook-Air Software Update[996]: Acquired Lock: 0, 1060, 0
Nov 12 11:12:20 Bruces-MacBook-Air installd[1061]: PackageKit: ----- Begin install -----
Nov 12 11:12:20 Bruces-MacBook-Air installd[1061]: PackageKit: request=PKInstallRequest <5 packages, destination=/>
Nov 12 11:12:20 Bruces-MacBook-Air installd[1061]: PackageKit: packages=(
        "PKLeopardPackage <file://localhost/Library/Updates/041-6215/FlashbackMalwareRemover.pkg>",
        "PKLeopardPackage <file://localhost/Library/Updates/041-6259/MacBookAirMid2012SoftwareUpd1.0.pkg> ",
        "PKLeopardPackage <file://localhost/Library/Updates/041-6725/MacBookAirandMacBookProUpd1.0.pkg>",
        "PKLeopardPackage <file://localhost/Library/Updates/041-7916/MacOSXUpd10.7.5.pkg>",
        "PKLeopardPackage <file://localhost/Library/Updates/041-7916/RemoteDesktop.pkg>"
Nov 12 11:12:20 Bruces-MacBook-Air installd[1061]: PackageKit: Skipping component "com.apple.ColorSyncUtility" (4.7.4-4.7.4-235011000000000-*) because version 4.7.5-4.7.5-235012000000000-* will also be installed.
--- many more lines of "Skipping component" deleted ---
Nov 12 11:12:21 Bruces-MacBook-Air installd[1061]: PackageKit: Skipping component "com.apple.iokit.IOUSBFamily" (5.0.8-5.0.8-508004001000000-*) because version 5.1.0-5.1.0-510004006000000-* will also be installed.
Nov 12 11:12:26 Bruces-MacBook-Air installd[1061]: PackageKit: Will do receipt-based obsoleting for package identifier com.apple.pkg.RemoteDesktop (prefix path=/)
Nov 12 11:12:26 Bruces-MacBook-Air installd[1061]: PackageKit: Extracting file://localhost/Library/Updates/041-6215/FlashbackMalwareRemover.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Nov 12 11:12:27 Bruces-MacBook-Air installd[1061]: PackageKit: Extracting file://localhost/Library/Updates/041-6259/MacBookAirMid2012SoftwareUpd1.0.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Nov 12 11:12:30 Bruces-MacBook-Air installd[1061]: PackageKit: Extracting file://localhost/Library/Updates/041-6725/MacBookAirandMacBookProUpd1.0.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Nov 12 11:12:36 Bruces-MacBook-Air installd[1061]: PackageKit: Extracting file://localhost/Library/Updates/041-7916/MacOSXUpd10.7.5.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Nov 12 11:13:12 Bruces-MacBook-Air installd[1061]: PackageKit: Extracting file://localhost/Library/Updates/041-7916/RemoteDesktop.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Nov 12 11:13:12 Bruces-MacBook-Air installd[1061]: PackageKit: update_dyld_shared_cache -overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Nov 12 11:13:13 Bruces-MacBook-Air installd[1061]: update_dyld_shared_cache[1068] updating i386 cache because current cache file contains a different set of dylibs
Nov 12 11:13:18 Bruces-MacBook-Air installd[1061]: update_dyld_shared_cache[1068] updating x86_64 cache because current cache file contains a different set of dylibs
Nov 12 11:13:23 Bruces-MacBook-Air installd[1061]: PackageKit: Using sandbox version of /usr/libexec/xpchelper
Nov 12 11:13:23 Bruces-MacBook-Air installd[1061]: PackageKit: xpchelper --rebuild-cache --overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Nov 12 11:13:23 Bruces-MacBook-Air installd[1061]: Deferred path /System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/Dutch.lproj/DisplaysPref.nib/objects.nib is not in sandbox and will be skipped.
--- many, many more lines of "Deferred path ... is not in sandbot and will be skipped ---
Nov 12 11:13:24 Bruces-MacBook-Air installd[1061]: Deferred path /System/Library/PreferencePanes/UniversalAccessPref.prefPane/Contents/version.p list is not in sandbox and will be skipped.
Nov 12 11:13:24 Bruces-MacBook-Air installd[1061]: open on /System/DeferredInstall/Scripts/Shove: File exists
Nov 12 11:13:26 Bruces-MacBook-Air installd[1061]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=114 "An error occurred while setting up files for deferred installation." UserInfo=0x7fd263b62cc0 {NSLocalizedDescription=An error occurred while setting up files for deferred installation., NSUnderlyingError=0x7fd263c16a20 "“Shove” couldn’t be copied to “Scripts” because an item with the same name already exists."} {
        NSLocalizedDescription = "An error occurred while setting up files for deferred installation.";
        NSUnderlyingError = "Error Domain=NSCocoaErrorDomain Code=516 \"\U201cShove\U201d couldn\U2019t be copied to \U201cScripts\U201d because an item with the same name already exists.\" UserInfo=0x7fd263ba9890 {NSUserStringVariant=(\n    Copy\n), NSDestinationFilePath=/System/DeferredInstall/Scripts/Shove, NSFilePath=/private/tmp/PKInstallSandbox.RfMmtE/Scripts/com.apple.pkg.update.os .10.7.5.11G63b.delta.6mH88d/Shove, NSUnderlyingError=0x7fd263c4da50 \"The operation couldn\U2019t be completed. File exists\"}";
Nov 12 11:13:26 Bruces-MacBook-Air Software Update[996]: Releasing Lock: 0, 1060, 0
Nov 12 11:13:26 Bruces-MacBook-Air Software Update[1060]: Error: An error occurred while setting up files for deferred installation. (PKInstallErrorDomain code 114)

My daughter has not used her ipod touch for 16 months and has forgotten her passcode. restore factory settings keeps failing due to a software update failure!

my daughter has not used her ipod touch for 16 months and has forgotten her passcode. restore factory settings keeps failing due to a software update failure!
how can i get this ipod reset. She now has an iphone so this is going to be used by someone else in the family and should be simple to do but itunes just keeps booting it out even though it recognises that it was previously connected to our itunes account as all of the children were on my account

That has nothing to do with an update server. Do the following:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes

Update on 10.6.8 fails due to digital signature on update is missing

Similar Messages

Maybe you are looking for