Update on Android Attack - Fake Android security fix is really another trojan

Source from Android Central at http://www.androidcentral.com/fake-android-security-fix-really-another-trojan
By now most everyone knows that Google has addressed the Droid Dream malware mess in the Android Market, used the kill switch and issued a fix, and is in process of rolling out said fix to all affected users.  But since Android users in general are an impatient lot, some folks have been on the lookout for the files to manually install the fix instead of waiting.
Don't do it.
The folks at F-Secure have found that at least one of the so-called security patch files floating around is really just another trojan.  This is social engineering at it's finest -- use the promise of security to really make things worse.  You can read the gory details of the BgServ.A trojan found in the fake patch at the source link, but the important thing is that you need to wait for Google to push you the fix if you downloaded one of the infected files.  Like every other patch for the OS, whether it's an updated version of Android or something less glamorous like a security fix, only install files from Google's servers.
If you were affected by the malware, you should have received an email from big G, or will soon.  We have the full text of that message after the break, be sure to check that the sender is really Google, and sit tight.  They will get you all patched up. [F-Secure] Thanks Mike and Steven!
You are receiving this message to inform you of a critical issue affecting
your Android Market account.
Hello,
We recently discovered applications on Android Market that were designed to
harm devices. These malicious applications ("malware") have been removed from
Android Market, and the corresponding developer accounts have been closed.
According to our records, you have downloaded one or more of these
applications. This malware was designed to allow an unauthorized third-party
to access your device without your knowledge. As far as we can determine, the
only information obtained was device-specific (IMEI/IMSI, unique codes which
are used to identify mobile devices, and the version of Android running on
your device).
However, this malware could leave your device and personal information at
risk, so we are pushing an Android Market security update to your device to
remove this malware. You will soon be receiving a notification on your device
that says "Android Market Security Tool March 2011" has been installed. You
are not required to take any action from there, the update will automatically
run. You may also receive notification(s) on your device that an application
has been removed. Within 24 hours of receiving the update, you will receive a
second email confirming its success.
To ensure this update is run quickly, please make sure that your device is
turned on and has a strong network connection.
For more details, please visit the Android Market Help Center at
http://market.android.com/support/bin/answer.py?answer=1207928
Regards,
The Android Market Team
©2011 Google, Inc.
1600 Amphitheatre Parkway
Mountain View, CA  94043
Email preferences:  You are receiving this email to notify you of a critical
issue affecting your Android Market account.

I agree this is overblown. By the time it hits the mainstream media, you'll notice it always takes on an alarmist tone. The issue has already been posted on this forum:
Here
http://community.vzw.com/t5/Android-Discussions/Android-Exploit-Credential-Theft/m-p/531658 
And here:
http://community.vzw.com/t5/DROID-by-Motorola/Android-2-3-4-to-Plug-Massive-Security-Hole-for-your-Droid/m-p/532590

Similar Messages

  • How to use auto update in android ?

    hi,
    i want to use adobe air auto update in android devices.. what can i do ?

    Did you install the maintenance service properly in download and install updates in the background?
    *Tools > Options > Advanced > Update: "Use a background service to install updates"
    *https://support.mozilla.org/kb/what-mozilla-maintenance-service
    If updating Firefox isn't working properly then this could be that the maintenance service isn't installed and enabled properly or not allowed in security software.
    The maintenance service can be uninstalled separately, it shows up as a new item under add/remove programs.
    You can try to uninstall and reinstall the maintenance service as a user by running the installer file in the Firefox program folder.
    *maintenanceservice_installer.exe

  • Lenovo VIBE Z2 Pro problems with hearing and camera after updating to android Lolipop

    Hello All,
    After updating to Android Lolipop three days ago, on my phone occured some problems. 
    1. The hearing while calling/receiving a call is very low, when the volume is on max. It was extremly high on max volume before the update. 
    2. Now when I'm using the camera most of the pictures are captured with low quality and not well focused. Around one out of four pictures comes out with good quality and well focused. But I reviewed the settings and tried do switch them all the ways around but the problem still occurs. 
    Any help will be appreciated! Hopefully the next update will fix these issues.
    Regards,
    Sava

    gvdkolk wrote:
    Hello Guru,
    One question:
    Since I went to VIBEU_V2.0_1448_ST_K920_CMCC my phone is not connacting to the 3g network.
    Just edge. I refreshed apn restart the phone, no result.
    Is this a result of the update?
    Thanks in advance,
    Ger
    Hi Ger
    The Chinese K920 version is meant to be sold and used only in China with a certain local carrier/provider(That's why it's got the ''China Mobile'' logo on the back).The main difference between the Chinese and the international K920 version is the GSM receiver(hardware difference)....
    .....It seams there is a partial workaround(To make the Chinese version more ''internationally 3G/4G friendly'') but my experience with the Chinese K920 is limited and in this case it would be better to ask the actual users->
    Check out THIS THREAD .
    I can't help you much on this one....Sorry.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • After the update to Android 5.0.1 my Galaxy Gear S will not install apps, I get an error message that says "Installation Failed. Try Later. (WO:WO:-1002)

    After the update to Android 5.0.1 on my Galaxy Note 4, my Galaxy Gear S will not install apps, I get an error message that says "Installation Failed. Try Later. (WO:WO:-1002). I am glad it was a free app I was trying to install (I tried a couple of different ones to see if it was just a bad app and they all failed on the install. The Note 4 and the Gear S seem to be communicating okay via bluetooth (health stuff syncs, Gear S controls the music player on the note 4 Etc. )

    Everything that I had installed previously on the gear S still works.
    Everthing while in the gear manager seems to be working okay also. I can make changes in the Gear manager on the note 4 and they show up on the gear S. I have an app called watch styler , it let me create a new watch on the Note 4 and that showed up on the Gear S.
    The only thing that seems to be not working is installing new apps.
    When trying to get a new app it looks like it is working as normal , the dowload shows it is working but it errors out when it goes to install it.
    REPLY SEPARATOR ***********

  • HT6146 i have an iPhone 5 running IOS 6.1.4. I don't want to update to IOS 7 because I don't like it. Can I download 6.1.6 to my phone or am I now forced to move to IOS & to get this security fix?

    I have an iPhone 5 running IOS 6.1.4 and I don't want to update to IOS 7 because I don't like it. Can I download the security fix 6.1.6 or am I now going to have to go with 7.0.6 for this phone?

    This was my question exactly. Thanks for getting to the answer even though it's not what I wanted to hear. When I tried calling Apple earlier today to get an answer, I was unceremoniously disconnected twice while on hold for several minutes.

  • THRiVE system software 3.2.1.31.5.0002 update released (Android 3.2)

    We are pleased to announce a new software update for your THRiVE tablet. This release will update the Android platform from version 3.1 to 3.2, adding new features and performance enhancements. Toshiba recommends that you download and install this update.
    Release 3.2.1.31.5.0002 highlights: 
    Enables an improved compatibility mode enhancing the way applications originally designed for smaller screen devices appear and function on the larger tablet display.
    Improves screen rotation acceleration.
    Adds extended screen support API, giving developers more precise control over the user interface across a range of Android-powered devices. 
    See http://kb.toshiba.com/98083841 for more details about THRiVE software updates.
    You can update your system software by either of the following methods:
    Tap on the update message sent by the Toshiba Service Station application to your device, or... 
    From the Home screen tap on the 'Apps' icon in the upper right corner, locate and tap the 'Service Station' app's icon, tap 'Check for Updates' and follow the on screen directions.
     

    Updated my AT105 last night. Sat with it during the process and eveything seemed to work fine. Downloaded local newspaper like I do every morning and off to work it went. At work, I sync my documents with Docs to Go. Here is where my problems start.Apparently the upgrade broke my docs to go licence link as the desktop app states I need to upgrade to v3.0 and buy the licence. I'm already at v3.0 and have the valid licence that worked all the way up to today. I also noticed that today when I view my device on my computer, the tree now shows my SD card and any USB memory as a separate device. OK I guess. What is not OK is the internal storage of my TT is now displayed with two identically named folders for every folder on my device. Only difference is each and every duplicate shows it was last modified exactly 1 hour before the original and the files in the duplicate cannot be accessed. I have also noticed that the content between the duplicate and the original is for the most part identical. Some folders are not identical. This is only showing up on my desktop, not on my TT. This is the first upgrade I've had a problem with. I'd like the folder issue cleared up.

  • Can we update the android version of this phone?

    Can we update the android version of this phone?

    If your phone is running 4.0.4 Android version, software 7.02.605.10 710RD, sense 3.6, then it is on the latest available version of the operating system for the HTC Thunderbolt. There won't be another update.

  • While updating to Android 4.0- i got a problem

    my mobile is sony ericsson xperia Neo v- using PC Companion i tried to update from android 2.3 to 4.0 -while updating due to system hang up-I restarted my pc an disconnected  the usb cable and again connected then now my phone is not working

    Backup everything as it will erase all data on phone (sms, contacts,apps)
    Update/Repair your phone via PCC or SUS
    PCC (PC COMPANION) – Repair your software with this .First do the setup without connecting your mobile to pc.(only connect when you are asked to).
    Do it as follow >> PCC > SUPPORT ZONE> SOFTWARE UPDATE> REPAIR SOFTWARE (written with blue)  
    PC Companion http://www.sonymobile.com/global-en/tools/pc-companion/
    SUS ( Sony Update Service)  ... download and install it on pc and follow the on-screen instructions http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
                      or
    http://www.sonymobile.com/global-en/tools/update-service/
    Both the links are same
    Discussion guidelines.
    Message me or any other moderator to seek help regarding moderation.

  • Apple Mail with OSX 10.9.5 quits on launch when mail window opens. May be related to install of Security update 2014-005. Any suggestions on fixing this?

    Apple Mail with OSX 10.9.5 quits on launch when mail window opens. May be related to install of Security update 2014-005. Any suggestions on fixing this?
    Here is the beginning of the  Problem details error message:
    Process:    
    Mail [763]
    Path:       
    /Applications/Mail.app/Contents/MacOS/Mail
    Identifier: 
    com.apple.mail
    Version:    
    7.3 (1878.6)
    Build Info: 
    Mail-1878006000000000~1
    Code Type:  
    X86-64 (Native)
    Parent Process:  launchd [264]
    Responsible:
    Mail [763]
    User ID:    
    501
    Date/Time:  
    2014-10-20 15:23:32.902 -0800
    OS Version: 
    Mac OS X 10.9.5 (13F34)
    Report Version:  11
    Anonymous UUID:  1058C7CE-141A-982C-2F1D-4F0EB47F37A1
    Crashed Thread:  10  Dispatch queue: NSOperationQueue Serial Queue
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Application Specific Information:
    *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSKeyPathExpression objectForKey:]: unrecognized selector sent to instance 0x60000045ff20'
    abort() called
    terminating with uncaught exception of type NSException

    Try a restart.
    Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - Mavericks
    Safe Mode - About

  • New Os 10.5 Security update today....but didnt fix my SMB/NAS issue!

    Since I am one out of many here in this forum that cnnot connect his NAS harddrive to Leopard, i was looking forward to receive an update from Apple.
    Now today there is an update available, which also states it fixes Samba issues....but unfortunately no change on my NAS harddrive. still can connect, see the main folder, but cant drill down and see the files or access files. all works fine on windows (!!) and if i connect the NAS to the Mac straight away.
    anybody else still has issues after today's software update?
    Please let me know,
    Thx, Markus

    As soon as I read your post, I went checking for software updates and voila, there was the Security Update.
    I downloaded and installed it, but no good news. Finder still only shows the topmost shared folders inside the NAS drive, but it doesn't let me browse into them.
    I really think there is something wrong with the kernel or with the smbfs support. Are we supposed to get stuck with this problem until Apple finally releases Darwin 9.1? How long will it take?

  • In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

    In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

    Security Update 2012-001 Bricks Rosetta programs
    I've outlined the restore proceedure here, it covers a lot of bases and explains what is going to occur so please don't be intimidated it's a LOT easier that it appears.
    Take your time and comprehend the steps involved and you'll be backup up like before in short order.
    Restore method.
    #1 Backup your personal data off the machine.
    If you get a gray screen or some other hangup upon booting, try holding the Shift key down while booting to enter Safe Mode.
    Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
    Disconnect all drives now to prevent any mistakes from occuring.
    #2 Try Restoring from a TimeMachine or hold option bootable clone
    If you have TimeMachine drive, or a hold the option key bootable clone use that to erase and restore from before the Security Update occured.
    Obviously if you didn't make a recent backup before the update, your going to have to skip to Step #3.
    Note: A TM restore can take a awfully long time, a clone restore takes under 2 hours in most cases.
    If you don't know how to restore from TM drive
    http://pondini.org/OSX/Home.html
    #3 Reinstall OS X 10.6 from disk
    If no recent TM or bootable clone then:
    Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
    Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk and Permissions of your internal drive  (do not format or erase!!), Quit DU and simply re-install 10.6.
    Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway)  or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
    Note: If Disk Uitlity can't repair the drive, then come back to seek further assistance and make sure you have a copy of your data off the machine.
    #4 Update to 10.6.8 without Security Update 2012-001
    Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
    #5 Reinstall any non-working third party programs
    When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason.
    If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
    https://support.apple.com/kb/TS2570
    Note: For most users likley Step #3 and #4 is likley all that is needed to be done.
    That's it really.
    Further Reading:
    Learn how to have a OS X drive restore ability using TimeMachine or cloning software
    Learn how to clone your entire OS X boot here
    http://www.bombich.com/get_ready_for_lion.html
    TimeMachine  help here
    http://pondini.org/OSX/Home.html
    Make copies of your original Snow Leopard
    http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
    Learn how to make a bootable SL USB thumb drive
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    Deciding on upgrading to Lion?
    Learn which programs ARE NOT compatible/updated for Lion, Rosetta programs will not run on Lion.
    http://roaringapps.com/apps:table
    Unverified hacks
    Note: You may see a "hack" for this issue floating around, it has had mixed results as people's software is different.
    You may want to try it, but it's at your own risk. It has worked fast for some and not at all for others, hopefully over time it will work for all.
    The above methods I outline are Apple approved restore methods + based upon experience here and not a quick fix, but are sure to work as Apple recommends such steps themselves.
    If at any time you feel this is beyond your capability, please seek local Mac/PC professional assistance before you lose your data.
    In fact my steps above are very simple, you might want to have a family member or friend perfrom the proceedure in about a hour or two.
    If you don't have any backup, please maintain at least a TM drive, just hook up a new blank external drive and TM will ask you to make a backup, takes some time so let it work.
    If your a bit more skilled, a option bootable clone is much superior than TM drive.
    Good Luck

  • Galaxy Nexus: No 4G signal After Update to Android 4.02

    I purchased a Galaxy Nexus today, connected to 4G, downloaded ap's and used the phone on 4G for approximately an hour today with no issues. I was then altered to an update for Android 4.02.
    After completing the update, I am no longer able to get 4G in most places. When I can get 4G, it is very weak.
    For comparison, in the same spot, a Rezound will get 4 bars of 4G and the Galaxy Nexus will not connect to 4G (just 3G). I have confirmed this behavior on both of the Galaxy Nexus' purchased by our company.
    Has anyone else seen this behavior with the 4.02 update? I have tried rebooting the phone as well as a hard reset, no luck. An hour on the phone with a Verizon 4G specialist with no luck.
    Help.

    As others I am in the same boat. Picked up the Nexus after I got off work yesterday. Original downloads were quick as the phone was synching and installing my apps and gmail account. Once that was done the rep installed the extended battery and booted the phone and then from what I can tell, installed the update since while I was leaving the store (corporate store) it rebooted. I did not pay much attention as I was headed to another job. Got there and was on wifi and then wifi when I got home. Came to work today and was looking at my connection, which has been great before on my Bionic for both 3G and 4G and have a very weak 3g running at 117-120 dBm and no 4G at all. I will be going into town for a Dr's appt adn will see how it is there (still a stong 4G area). More than likely will be going back to the VZW corp store and see what they have to say. 

  • New LG Revolution Will not update to Android 2.3.4

    I purchased my wife an lg revolution on Feb 7,2012 it will not update to android 2.3. I have an lg revolution as well that was able to update to android 2.3.4 in November. I talked to a rep at a Verizon store he told me that i would have to contact LG, Lg said that they do not do the updates, Verizon does all of the updates. i have kernel version 2.6.32.9-perf build number VS910VZ6 and Software version VS910ZV6 android version 2.2.2. Also i have done a soft reset and a hard reset. i have went to about phone>software update>and check new it says no new software update available which i know is wrong.LG also told me that Verizon could send the update to my phone. thanks

    Good Afternoon matt423,
    I'm sorry to hear of the difficulties you are experiencing in attempting to update your software. The latest available software version for the LG Revolution is:  VS910ZV7. I have included additional information below to assist you with verifying the software and processing the update. I apologize we are not able to manually send the update to your handset.
    http://goo.gl/nOyPr
    http://goo.gl/MJ3vd
    Sincerely,
      JonathanK_VZW
    VZW Support
    Follow Us on Twitter@VZWSupport

  • Lenovo yoga 10 2 1050LC update to android 5.0 lead to wifi disfunction.

    Hi,Lenovo yoga 10 2 1050LC update to android 5.0 lead to wifi disfunction. The wifi page do not recognize any signal of wifi networks. I did these tasks to solve the problem, but all failed:1- airplane mode on/off combined with wifi on/off2- delete all saved wifi networks, and refress, the page freezes on:" searching wifi  networks ...."3- restart set/wifi modemPlease put the patch or somthing to solve the issue, would be very gartefull.Kisses 

    My Phone company is Irancell I havent tested MCI the other provider but I dont think that may be the problem since as soon as you insert the sim into the tablet the wifi is gone !PS: I dont think anyone from lenovo is reading this or else you would agree that in a standard support procedure thay would at least let us know about it request a log etc ... I was surprized to see a multinational brand in a leading It tech branch dosent have a meaningful support contact or ticketing system and expects its customers to solve their own problems.as much as I am like many others depended on my tablet for bussiness and study I think I shoud consider changing my brand and would definitly recommend this to " dose who don't".I'm not sure if lenovo is even support its channel parthners in Iran like the ones mentioned in earlier posts.  

  • Is there an update for Android 2.2 for the HP C510a Zeen tablet?

    Is there an update for Android 2.2 for the HP C510a Zeen tablet to any recent version of Android 4.0 or 4.1?

    Unfortunately not. The Zeen tablet runs a modified version of Android made specifically for that printer. There may be a firmware update available for your printer, but there is no way to update the Android OS on the device. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for