Update on Management View in VIRSA Compliance Calibrator 5.2

Hello,
is there a way to delete the Data for the Management View in VIRSA Compliance Calibrator 5.2 and then make a full new data load.
When I select Full Synchronisation and Management Reports in the Schedule Analysis, the system does not update the Management View correctly, the Management Report shows still roles which are already deleted in the SAP-System.
Thanks

Hi,
     You can do a Full sync of Users and Roles first which will be ovewrite and then run the Batch Risk Analysis Management Reports.
      You can try this exercise first if it does not work then go ahead with Alpesh's advice.
Thanks
Darshan

Similar Messages

  • Re: Virsa Compliance Calibrator & Pre-defined SOD Rule Set

    Hi All,
    We have installed the Virsa Compliance calibrator 5.1 in our sandbox environment. When we goto the "Rule Architect" tab under Compliance calibrator using tcode /virsa/zvrat it brings up the page with Rules information.
    Per the Virsa documents that i read they have mentioned that there are pre-defined SOD Rules (Transaction codes and Tcode objects) that we can use in the Rule Architect.
    My question is how do i enable and use those pre-set SOD Rules that Virsa provides by default. I do not see them under the Rule architect tab though. Can someone give some pointers to use these pre-set SOD rules.
    Thanks & Regards
    -Murali

    Hi Laziz,
    Thanks for your patience in replying to my CC 5.1 queries. I did follow your steps for the Generate Rule & Background Job-> Schedule Analysis and scheduled the job immediate.
    However, when i looked up the status of the scheduled analysis Background Job-> Search pulls up the job i scheduled at the top it reads "Job scheduler Status: unknown error" . I clicked on "View Log" button and it shows some messages as shown below (Note: I am just posting some parts of the error msgs below. but it still goes for 1 page...)
    May 16, 2007 1:09:07 PM com.virsa.cc.xsys.bg.BgJobDaemon init
    INFO: *** BgJobDaemon loaded
    May 16, 2007 1:11:09 PM com.virsa.cc.common.util.ConfigUtil setDefaultJ2EEParam
    WARNING: Cannot get Application URL: null. PLEASE SET 'Background Daemon URL' IN CONFIGURATION TAB
    java.lang.NullPointerException
         at com.virsa.cc.common.util.ConfigUtil.setDefaultJ2EEParam(ConfigUtil.java:203)
         at com.virsa.cc.common.util.ConfigUtil.getBgJobStartURL(ConfigUtil.java:192)
         at com.virsa.cc.xsys.bg.AnalysisDaemonThread.run(AnalysisDaemonThread.java:45)
         at java.lang.Thread.run(Thread.java:534)
    May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
    FINEST: class name: com.virsa.cc.extreport.ReportPack50SP1_01.ReportPack50SP1_01 class: com/virsa/cc/extreport/ReportPack50SP1_01/ReportPack50SP1_01.class
    May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
    FINEST: Jar Entry length=1568 compressed size=1568 actual read=1568
    May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
    FINEST: class name: com.virsa.cc.extreport.ReportPack50SP1_01.CrtActbyRsk_Act_RskLvl class: com/virsa/cc/extreport/ReportPack50SP1_01/CrtActbyRsk_Act_RskLvl.class
    May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
    FINEST: Jar Entry length=13210 compressed size=13210 actual read=13210
    May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
    FINEST: class name: com.virsa.cc.extreport.ReportPack50SP1_01.CrtRolbyRsk class: com/virsa/cc/extreport/ReportPack50SP1_01/CrtRolbyRsk.class
    May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
    FINEST: Jar Entry length=19287 compressed size=19287 actual read=19287
    May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
    FINEST: class name: com.virsa.cc.extreport.ReportPack50SP1_01.CrtProfbyRsk class: com/virsa/cc/extreport/ReportPack50SP1_01/CrtProfbyRsk.class
    May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
    FINEST: Jar Entry length=12807 compressed size=12807 actual read=12807
    May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
    FINEST: class name: com.virsa.cc.extreport.ReportPack50SP1_01.UsersbyOrgLevels class: com/virsa/cc/extreport/ReportPack50SP1_01/UsersbyOrgLevels.class
    May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
    FINEST: Jar Entry length=18557 compressed size=18557 actual read=18557
    May 16, 2007 1:24:59 PM com.virsa.cc.common.util.ConfigUtil setDefaultJ2EEParam
    WARNING: Cannot get Application URL: null. PLEASE SET 'Background Daemon URL' IN CONFIGURATION TAB
    java.lang.NullPointerException
    I am not sure whats causing this and it's been 2hrs since i scheduled the user analysis but i don't see any data still appearing in the fron-end..Any pointers again???
    Thanks
    -Murali

  • 4.6C to ECC 6.0 upgrade - Issue with Virsa Compliance Calibrator

    The issue is that phase IS_SELECT during the PREPARE is not detecting VIRSA as an add-on. This of course will result in VIRSA not being upgraded and the system will be unstable ( note 989368 ). Also, I can't choose to delete the add-on either.
    We installed the compliance calibrator before SAP purchased VIRSA. So, the tool was installed through transports, not SAINT. I assume this is why phase IS_SELECT is not seeing the tool.
    Any ideas?
    -Scott

    Received a reply from SAP. Since VIRSA was installed through STMS the IS_SELECT phase will not see the add-on. I had to do the ECC 6 upgrade as normal and then install VIRSA 4.0 for SAP 700 systems through SAINT.
    I had to clear SPDD and SPAU as much as possible for /VIRSA/* objects. However, there were six objects I could not clear. This did not cause any issues.
    Notes 1006083 and 985617 are needed for this procedure.
    Thanks for all the suggestions.
    -Scott

  • Virsa compliance calibrator

    Hi All
    Can anyone help. I want to know if anyone has any documentation/ and or screen shots on Versa, as I know nothing about it.
    Thanks in advance. You can send info to [email protected]
    Mark

    Hi Leandro
    Thank you for your reply. I require as much info on 5.1 as you can get. I know nothing about the compliance calibrator and I want to rectify that.
    Thanks
    Mark

  • Chart view - Management Reports - Compliance Calibrator 4.0

    Is posible to change scales in the graphics provided by Chart view in the option Management reports in the Compliance Calibrator?
    How?
    Thanks

    Let me change the question: is it possible to generate graphics weekly, for example?
    Thanks

  • Updating Compliance Calibrator Rule Set

    The business has decided to change a few rules by removing a couple of custom tcodes from the rule set.  In DEV I go into the Function and remove the objects associated with the tcode and disable the tcode.  After running the rule set update there is still some sort of tie.  I have created a test ID in DEV with a known issue around each of the changes.  I'm not getting a different result when running compliance calibrator.
    Any ideas?
    We are running R/3 4.6C and compliance calibrator 4.0

    Can you please check the following demo?
    [Virsa Compliance Calibrator Application for SAP v5.1 Demo|http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/d2f1cf9c-0d01-0010-2dac-aedd3c4f7f5b&overridelayout=true]
    Please give more details on the step where you got stuck.
    Regards,
    Dipanjan

  • CC 5.2 SP9 - Management view update problem

    Hello all,
    We are having trouble updating the management view, in CC SP09. After running full synchro jobs on profiles, then roles, then users, and finally updating the management view, the results seem wrong (in production, we were expecting about 50% of users with violations, while the management view did not see any)...
    Any help would be appreciated, thanks!
    Sophie Planchais

    I stole this from another thread but at least it saves me typing it all in
    Follow these instructions
    1. Full user synch
    2. Full role synch
    3. Full profile synch
    4. Batch risk analysis for users (full synch mode)
    5. Batch risk analysis for roles (full synch mode)
    6. Batch risk analysis for profiles (full synch mode)
    7. Batch risk analysis for critical actions (full synch mode)
    8. Management reports by itself.
    Wait for each job to complete before you run the next one.
    Sometimes I even run job 8 inbetween jobs 4-7, just to make sure.  In other words the job order is then 4, 8, 5, 8, 6, 8, 7, 8.  As I have had problems that job 8 will not finish (after 4, 5, 6, 7 have been run) which we surmise is due to too many changes being required.

  • Compliance Calibrator 5.2 Install Question

    I am at a customer site installing Compliance Calibrator.  We have followed the installation steps as outlined in the CC5_2_Install_700.pdf and everything has been going smoothly.  We have restarted our instance and now we are trying to verify that it has installed properly.  On page 44 of the guide, it says:
    The Virsa Compliance Calibrator banner appears. This verifies that your installation was successful. There is no content below the banner until you:
    - create JCo destinations.
    - assign a role, provisioned to perform all Virsa Compliance Calibrator transactions, to a back‐end user account.
    However, when we go to the URL as described in the guide, we get the netweaver login screen, but when we try to login, it doesn't show us the banner as described above.  Instead it appears that the login has been rejected, though no rejection error message is displayed. 
    What step may we have missed?
    Thanks,
    Santosh Krishnan

    Also please check what Language you have set for the user you are logging in with.
    You must have created one user to access Virsa CC. Please check language option. If it is empty, kindly set to English
    This should solve your problem.
    Regards,
    Faisal

  • ERROR VIRSA CC 5.2 - Management View -User Analisys - NOT UPDATED!!!!!

    Hi ,
    i executed the JOB of SYNK of users,  the Job of RISK analysis and the JOB of update of management Report .
    When i go in - Management View - User Analisys -( i select date , System , User Group ) Virsa CC shows me the correct number of users actually in the system, for this user group , according to USR02 SAP table , BUT Users with NO Violations and Users With Violations are not correct.
    I show results:
    No. of Users Analyzed : 25                CORRECT
    Users with no Violations : 95 379%     NOT CORRECT
    Users with Violations : -70 -279%        NOT CORRECT
    The Interactive pie chart shows the correct number of users with violations : 2
    Who it' s possible ?
    BEST REGARDS
    Maurizio

    Abdul,
    You stated in your initial comment that the Management Report check box was NOT selected? If this is the case then the graphs on the informer tab have not been updated. You must first execute the SOD (user/role/profile) analysis, once that job is complete then execute a separate job for the management reports. This will then update the informer tab (given that your rule set has been updated with your custom functions and risks).

  • Anyone have Virsa/SAP Compliance Calibrator documentation?

    I'd really like a Virsa "Owners Manual", but for now I'd just settle for an explanation of all the parameters contained in table /VIRSA/ZVRATCNFG.  Some are self explanatory, some are not.  To maintain this table do the following:
    1.  tcode /n/virsa/zvrat
    2.  execute
    3.  menu:  compliance calibrator > configuration option
    I'd like to know what each parameter does, the possible entries, and the cause and effect result of each entry.  Any help will be appreciated. 
    Thanks,
    Marshall

    Dave,
    It appears to me that the only credentials required to access that site are SAP Service Marketplace logon (the so-called 'S number').  You can obtain these from the person in your company that administers your SAP licence (usually a basis person).  Or, you can apply yourself at http://service.sap.com/request-user .
    It is forbidden in this forum to send copywrited documents from user to user.
    Best Regards,
    DB49

  • SAPu00AE COMPLIANCE CALIBRATOR BY VIRSA SYSTEMS

    Hello all,
    My company are thinking of implementing the above for auditing purposes to comply with Sarbanes-Oxley and compliance. I have read some documentation from the SAP website and this documentation states that:
    "Because SAP Compliance Calibrator by Virsa Systems is embedded in your SAP system, no additional hardware or software is required."
    Has anyone implemented this soultion? If so is there any additional documentation available for it?
    Cheers,
    Bernard.

    David,
    As We are in the process of implementing this virsa tool but we are not sure as to what are the exact steps that we should extract  to. Do you have a step by step guide (apart from the VIRSA install guide) which would guide us through the complete install and configuration. We have ECC 6.0 ,Portal,BI 7,CRM 5
    Would you be kind enough to send the information to me asap.
    Please forward me the doc to following id , I will be very much appreciate if you could do the help ..
    [email protected]
    Thanks
    Laxmi

  • Is Compliance Calibrator the same as GRC Access Control?

    I have been asked to look at<b> Compliance Calibrator </b>and am getting confused about what functionality is offered. I have done the basic e-learning course for Compliance Calibrator (GRC200): this was all about separation of duties etc. Fair enough. But I also have a Document called "<b>SAP GRC Access Control</b>" which talks about the same S.O.D compliance functionality but also talks of "roles triggering workflows", "users creating roles", "automated approvals for roles" eg:
    "SAP GRC Access Control streamlines access requests by filling each request automatically with user identity information from a lightweight directory access protocol (LDAP) directory or HR database, thereby eliminating the need for user intervention. Approvers receive an e-mail with a direct hyperlink to the request inside the application, where they can easily view and approve the request. The application then checks for security violations before updating accounts  automatically."
    None of this was covered on the Compliance Calibrator course, so what product offers this? I can see another product by Virsa called <b>Access Enforcer</b> but have no info on this... can anyone enlighten me?

    SAP GRC Access Control is the SAP application that comprises the former Virsa products Compliance Calibrator, Access Enforcer, Risk Terminator, Firefighter and Role Expert.

  • Compliance Calibrator: Background jobs didn't bring in the correct data.

    Hi Gurus;
    In Compliance Calibrator; background jobs were last run on 5/27/09 but the management report shows that the summary is as of 5/20/09. That should have been updated uptill 5/27/09 and the new number of conflicts should have come up, which it didn't. What can be the problem?
    Thanking you;
    Raja

    Hi Harleen;
    This job was actually set by the client. So when I went to check the parameters of the jobs, I found that the field MGR_ANALYSIS consists of Field value "N". Does this mean that the Management Analysis box was not ticked when this job was scheduled?
    Regards;
    Raja

  • Why upgrade from Compliance Calibrator to GRC?

    Hello Experts- My company has yet to implement GRC 5.3. We already utilize SAP Compliance Calibrator by Virsa Systems 4.0, which works fine, so what would be the benefit of upgrading to GRC? Is it really necessary? Is it just to stay current? Also, is it true that GRC will be moving from Java back to an ABAP stack? If so, when is the new ABAP version of GRC set to be available?
    Thanks for your advice and opinions.

    Regarding the upgrade from 4.0 to 5.3 I concur with Alpesh and Varun.
    Regarding the upgrade to 10.0, current plans are for Ramp-up to be available in December 2010 with general release scheduled for mid 2011.
    According to the latest material from SAP, they are only supporting a migration path as follows:
    4.0 -->5.3 --> 10.0
    There is no supported upgrade path from 4.0 directly to 10.0.
    It should be noted that it is a significant change in architecture and therefore not a simple migration path. SAP are recommending an upgrade to 5.3 followed by a migration to 10.0 for the technical side of things.
    5.3 does still have some significant advantages over 4.0 and therefore is still an option. owever, if you wish to register your interest, SAP are seeking ramp up customers so I would suggest you contact your Consultants or account management within SAP to discuss the options if you are considering it.
    Simon

  • No Graph in informer tab (Management View)

    Hello Experts !
    Recently i added in the CC two systems (copies from the Production). Added as connectors and after added in the Logical system . Also did a ruleset update.
    I did all lthe steps for Syncronization and Risk analysis and the management reports as well .
    The Chart doesnt appear at all . Its completely empty.
    I checked the IGS and it was running. Are there any other parameters i need to check ?
    I have also other 2 systems connected and they are working fine ..any ideas ?
    best regards,
    David

    If you are able to execute cross system analysis with CC then the graphs should be generated properly, so there does not seems to be any sync or connection problem. What i feel like is there is something wrong with IGS itself.
    IGS is included with your Netweaver Software for sure so you might have found that it is working but may be you need to configure it with Visual Administrator.
    Checkout Compliance Calibrator 5.2 Installation Guide for WAS 700 and turn to Page no. 29,
    Thanks & Regards,
    Amol Bharti

Maybe you are looking for