Update on windows 10 preview version 10130 blue screens with f-secure as cause supplied by talktalk

As soon as 10130 starts up blue screen critical process died the f-secure is supplied by talktalk version Super Safe Boost 2.21 build 285CCF CUIF 10.03 build 258
CCF DAAS2 1.10 build 369
CCF Guts2 2.01 build 418
CCF Upstream 2.01 build 980
CCF Diagnostics 8.01 build 924
CCF Scanning 1.51 build 112.309
CCF Network 1.03 build 102
CCF Reputation 2.0 build 1337 as soon as install is about to complete Blue Screen critical-process-died But as windows 10 no longer has F8 to enter safe mode and unable to do msconfig either it would leave a novice user with useless Computer. PS i had re-enabled F8 option so was able to do restore back having taken a checkpoint before adding the anti-virus also it left the pc in a mess and i had to do a chkdsk /F to recover the pc correctly as windows 10 was just like safe mode with no apps apart fromt event viewer and Run so able to do CMD.EXE and recover the situation i even re-installed the latest 10130 iso to guarantee a clean situation and again as soon as f-secure is installed it blue screens and can not be uninstalled as instalaion shows installed but as had nor completed will only remove icon all previous releases worked as i was testing office 2003, photoshop etc as wanted to ensure migration from windows 7 to 10 would be uneventfull running in dual boot mode ------------------------------- how can i debug this problem . event viewer shows 3 errors------------------------------------------------------------------------Fault bucket , type 0Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:These files may be available here:　Analysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 262144Hashed bucket:------------------------------------------------------------------------------ Fault bucket , type 0Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:C:\WINDOWS\Temp\WER15AB.tmp.WERInternalMetadata.xmlThese files may be available here:C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_10.0.10074.0_514ab7a9a8ce992752eb54e1dd1412dafd33beb5_00000000_cab_110415cbAnalysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 4Hashed bucket:------------------------------------------------------------------------------------- Fault bucket 91736524612, type 5Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:C:\WINDOWS\Temp\WER15AB.tmp.WERInternalMetadata.xmlThese files may be available here:C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_10.0.10074.0_514ab7a9a8ce992752eb54e1dd1412dafd33beb5_00000000_111c1bb6Analysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 0Hashed bucket: e0ac3ecdf8185ff6d24e9c67904da683 maybe the version supplied to talktalk has a flaw which you have fixed and talktalk need a new version

Hi
Currently all versions of F-Secure Internet Security / SAFE will bluescreen with Windows 10 starting from Windows 10 build 10130. Only the beta version of F-Secure SAFE ("fs protection") is compatible.
We know what is causing the problem and are working on maintenance releases. The products will be updated before Windows 10 launches.
Ville
(F-Secure R&D)

Similar Messages

HELP... after 10.4.11 update I can't boot past the blue screen

HELP... after 10.4.11 update I can't boot past the blue screen, and it is pretty frustrating, to say the least. Here's what happened last night:
I installed elgato's eyetv 250, and at the end it asked to update the software. I did so, and when I tried to run it again it said I had to be running 10.4.11. I quickly went over and downloaded the 10.4.11 combo updater to my desktop and proceeded to repair permissions on my disk so I could run the updater.
I repaired permissions and started the updater. It got halfway through updating and said something like it could not finish and stopped. No reason why - it just stopped. I tried it again, and it did the same thing after going about 25 to 30 percent through the updating process. I thought that was very odd, so I checked, and I was running 10.4.9.
I thought I needed to get the 10.4.10 update, so I downloaded the combo updater several times. It would not run, giving me some error message that it would not even open, so I thought I needed to restart my computer to get it to run. I did so.
That's when my computer would not boot. It gets through the initial white screen with the logo in the middle and the revolving circle, and while it stays there for a long time the fans run increasingly faster. They tame down, and then the blue screen with "Mac OS" on it and the blue progress bar comes up. There is no blue progress bar, though... that's where it stops and will not go any further.
Can ANYBODY help me get this thing booted back up? It was so late last night that before I started I didn't back the Mac up, and of course I have a project on there that I need to finish Saturday afternoon for a company.
ANY HELP WILL BE SO GLADLY APPRECIATED. If you can give me step by step instructions on what to do, you will surely be blessed! Thanks for any help,
Barry
Jeremiah 29:11

Hi mrstang, and a warm welcome to the forums!
It sounds like Disk Directory problems.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.
If all the above do not resolve the problem, then it's time for an Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Be sure to use Preserve Users & Settings.

After Software update yesterday, ibook cannot reboot & stay in blue screen.

After yesterday software update, My ibook restart and got stuck in the blue screen with the spinning spiral icon in the middle of the screen.
I try to reset the pram and PMU but in vain.
I also use CRTL-V while rebooting and found the repeating last few lines which the command prompt shown was as follow:
localhost/system/library/coreservices/loginwindow.app/contents/MacOs/loginwindow s:Login Window Application Started
Anyone can assist, thanks in advance.

I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html

I have received the alert that my version of Safari no longer supports Youtube viewing. I am running version 5.1.10 on OS 10.6.8. Is there an update or a newer Safari version that is compatible with my OS?

I have received the alert that my version of Safari no longer supports Youtube viewing. I am running version 5.1.10 on OS 10.6.8. Is there an update or a newer Safari version that is compatible with my OS?

No, not without upgrading to a higher version of the Mac OS. However, the easiest thing to do is get another browser for use with sites that don't like older versions of Saari. I always have a secondary browser on any computer, Mac or PC. For our Macs, I install FireFiox alongside Safari when setting up a new computer.
As FireFox is updated sometimes weekly, YouTube should not have a problem with it.
https://www.mozilla.org/en-US/firefox/all/

I have a mac pro with OS X 10.5.8., I have a mac pro with OS X 10.5.8. How do I update to a more advanced version of OS X with a download?

I have a mac pro with OS X 10.5.8., I have a mac pro with OS X 10.5.8. How do I update to a more advanced version of OS X with a download?

You need to go through 10.6.3 and 10.6.8 to get to 10.7 or 10.8. If you find that 10.6.8 isn't enough, open the Mac App Store and try purchasing Mountain Lion 10.8. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Core 2 Duo(not Core Duo) or better CPU with at least 2GB of RAM, and if it does, phone the online Apple Store and order a download code for Lion 10.7.
(85026)

During installation of Windows 8.1, I get blue screen and can't proceed any further..

I'm trying to install Win 8.1 via Bootcamp 5.1 on my late 2012 3.4 i7 iMac. I'm installing from a Win 8.1 OEM DVD using an optical drive.
The partitioning process is fine, I have the latest windows support software on an MS-DOS (FAT) USB stick.
The install seems to be going fine, then up comes a blue screen (with mouse functionality) but no prompt/warning/error messages.
At this point I have no other option to restart and when I hold down the al key on start up, the Windows partition is not available.
Any ideas anyone?

It looks like that the installation process of one of the applications have caused some trouble. One of them may have changed or added kext files.
For that, the Window server crashed if you try to open a non Apple application like Firefox
Start the system in safe mode by holding the shift key on power on.
If save mode is reached, perform a permissions repair with the Disk Utility.
Don't bother about upcoming warnings like "could not repair file xy" as that occur cause you use the tool on a running system and opened files can not get touched by the tool.
After repair is done reboot system to normal and try to open Firefox.
If the problem persits, please report back here.
Lupunus

Lightroom 2015 version on creative cloud I am getting a blue screen with x mark when i am switch from library to develop mode

Lightroom 2015 version on creative cloud I am getting a blue screen with x mark when i am switch from library to develop mode

Hi Chandan,
Kindly try the below mentioned link.
Adobe Photoshop Lightroom Help | Lightroom GPU FAQ
Please share the results once you have tried the steps.
Thanks,
Atul Saini

MBP stuck on blue screen with spinning loading icon during update to 10.6.7

I have a mid-2010 model Macbook Pro 13inch, 2.4ghz/4gb ram
I've been scouring apple forums and even reddit and my googlefu has yielded no such luck. Basically, System Update has been yelling at me for a few weeks now to upgrade to 10.6.7 (among other updates) and I've been putting it off and putting it off, with the intention of eventually doing the update, but I just kept forgetting.
Finally tonight, I remembered, and decided to open System Update, and do all the recommended updates that it was asking me to do. So, without thinking twice (I've never had an issue with this before) I clicked download and install, and away it went, downloading like usual and then rebooting.
Thing is, it's been stuck at this blue screen with the spinning spiral coming up on 5 hours now. I know the 10.6.7 update was close to 400mb, but I've never had anything like this happen before.
My hard drive had more than 150 gigs free on it last time I checked, and it's been running absolutely flawless up until now.
Has anyone else experienced this? Is it supposed to take so long? What do I do?
I've been contemplating shutting it down by holding the power button, but since it's a OS update I'm afraid the drive will be corrupted, and unfortunately I don't have a current backup of the drive either... Help

I left my macbook plugged in over night, we're now going on 14 hours of this blue screen with the spinning wheel/symbol. Anyone?

Problem with iOS 8 in ipad air since update, "blue screen with restart"

Problem with iOS 8 in ipad air since update, "blue screen with restart"

I have exactly the same problem, i´m tired of looking for a solution but even here there is no answer... i don't know what else do. the blue screen and restart is more annoying every time i use it.

A6518f turn on diagnostic page then windows is loading files then blue screen and unresponsive

Pavilion a6518f, Turn power on get diagnostic sreen, then get windows is loading files, then get a blue screen with a big arrow cursor and thats all...non responsive

Troubledguy, welcome to the forum. We'll try to get you smiling again.
When I hear these symptoms, I consider two main components: 1) the hard drive and 2) the memory. Here is a guide to help you run the SMART test on the hard drive from the BIOS. It will tell you if the hard drive is failing or has failed. You can test the memory by removing all of the modules and replacing them one at a time and booting. Place the single module in the slot closest to the processor.
Figure 3: layout
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Blue screens with Boot Camp Drivers?

Recently my Bootcamp Windows 7 install started getting random blue screens. I enabled the Windows Driver Verifier and the blue screens show up as BAD_POOL_CALLER at wdf01000.sys. If I inspect the blue screen dumps, it points me to the error being in MacHALdriver.sys
I reinstalled Windows 7, and ran it with the Verifier to ensure the install was clean. It was. The Verifier triggered the same blue screen during the installation of the Boot Camp drivers. Please point me in the right direction with this issue. Thanks!
The Bootcamp drivers were downloaded today from Apple. Version 5.0 build 5033.

Actually it is a problem specific to later model Macs.
If your Mac was manufactured after the release of Leopard (or whatever is the current MacOS), then there's a **** good chance that the Windows drivers on the MacOS disk won't drive your specific hardware. This happened on my late model iMac ... with the MacOsX 10.5 DVD crashing like crazy when installing drivers as part of the Bootcamp install. Never even got around to installing the BC Control panel, most of the drivers were improperly installed or not at all, and the Windows New Hardware Wizard never registered any installs.
Crash City.
It would be nice if Apple kept updated versions of the Windows Setup program available at Apple.com ... with all the current Windows drivers for the current Mac hardware in them. Hey, I could copy that onto a USB drive or DOS formatted CD, boot Windows, copy the file onto the Windows partition, run it ... and then Bootcamp would operate well.
Just my 2 cents worth ...
Regards,

Blue screen with the following error SYSTEM SERVICE EXCEPTION (ACPL.sys)

Hi,
I had a blue screen with SYSTEM SERVICE EXCEPTION (ACPL.sys) error message yesterday.
It happened right after the graphic card update was completed. I have an HP Spectre XT laptop with Windows 8 and Intel(R) HD Graphics 4000.
After restart, I noticed that the available free space on my hard disk dropped by 4 GB!
Can you please assist?
Thank you.

We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop. (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. We need at least 2 DMP FILES to diagnose and confirm
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on your site, MS doesnt have this)
*Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
System specs are extremely useful so please include whatever you know.
Blue Screen View & Who Crashed are often wrong and should only be used in an emergency
Team Zigzag3143.com
Wanikiya & Dyami--Team Zigzag

Stuck on blue screen with clouds rainbow, floated ...

As it says.
When I start Skype, it goes straight to a blue screen with blue clouds and a green rainbow at the bottom. I get no prompt to login. I have followed various guides, such as renaming login to login1, deleting login, restarting the computer, uninstalling then installed skype (which gets me an error code 2734 I think), uninstalled and installed Internet Explorer. I have run windows update and everything is up to date. I also followed the advise in the floated topic, and even after using Command Prompt (which was not in Accessories folder, had to search cmd to find it) and restarting, the 'click this button' does not work.
Skype was working fine on Sunday, and now it is broken. The only thing I have done in the meantime is run a repair tool for Windows Media Player as a game I installed required it to play in game music.
EDIT: I use Windows 7.
Solved!
Go to Solution.

Scripting in Internet Explorer might be disabled by an Antivirus software. What Antivirus software is installed on your computer?
Meanwhile you can try the “legacylogin” workaround, which should enable login to Skype using the old legacy login window. However, you will not be able to login using Microsoft account (email address).
Quit Skype. Make sure that you don’t see any Skype.exe processes in Windows Task Manager. If necessary, then stop these processes.
Open this folder on your computer:
C:\Program Files (x86)\Skype\Phone\
You should see there the Skype application file (Skype.exe). Right click on the Skype.exe file and select: Send to – Desktop (create shortcut). Right click on the newly created shortcut and select Properties and then the Shortcut tab. In the Target field you will see now:
"C:\Program Files (x86)\Skype\Phone\Skype.exe"
Click with your mouse on the text in the Target field and move your curser one space after the last quotation sign and add the text /legacylogin. The text in the Target field should now read:
"C:\Program Files (x86)\Skype\Phone\Skype.exe" /legacylogin
Click OK to save the changes. Start Skype using this new shortcut. Can you now login to Skype?

My touchsmart will not boot allI get is a blue screen with f key to do different things

My Touch smart desk top will not boot when I turn it on all I get is a blue screen with HP in the center and f key functions

Hello charleshobby:
Your computers start up has been corrupted. No big deal. Turn on your computer hold down on F-8 key as you turn it on. This should put you in safe mode. If f-8 key fails then just disconnect the power cord at the power adapter and plug it back in and turn on your computer (This is called a fource start up) automatically puts your computer into safe mode. Use your arrow kek select safe mode with net work. Top one I belive. In safe mode close out Help and Support window displayed. Open up Recovery Manger and select Microsoft System Restore. Click next then click next again now a list of dates will appair choose a date before this event occured. Click next and let your computer complete the sytem restore. My guess Microsft up dates caused this issue. After this is finished now go back and change all your update setting to down load up dates but let me choose witch ones to install. Only install three at a time. To a void future occurances and black screen or blue screen issues. Follow these steps for blue screen or black screen. Please click on Kudos if this has resolved your issue. Thank you frrw.

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Update on windows 10 preview version 10130 blue screens with f-secure as cause supplied by talktalk

Similar Messages

Maybe you are looking for