Update one column from another
Hi guys,
I have two columns in a table, FIRSTNAME and LASTNAME. Currently, both firstname and lastname are appearing in 'Firstname' column. I would like to split the last name from this column and insert into the 'LASTNAME' column.
For example, here's what I have currently:
Line: -----
Firstname Lastname
Peter Andre
James Dean
Watch Man
Jenna Klare
James Smith
Tina Adams
Blair Witch
Currently, my 'Lastname' column is empty. I would like to update the table to insert lastname from the 'FIRSTNAME' field into 'LASTNAME' column, so the output will look like:
Firstname Lastname
Peter Andre
James Dean
Watch Man
Jenna Klare
James Smith
Tina Adams
Blair Witch
Please help.
Thanks in advance.
Hi,
maybe this,
SQL> with t As(Select 'Peter Andre' Name From Dual union all
2 Select 'James Dean' Name From Dual union all
3 Select 'Watch Man' Name From Dual union all
4 Select 'Jenna Klare' Name From Dual union all
5 Select 'James Smith' Name From Dual union all
6 Select 'Tina Adams' Name From Dual union all
7 Select 'Blair Witch' Name From Dual)
8 SELECT regexp_substr(Name,'[^ ,]+' ) First
9 , regexp_substr(Name,'[^ ,]+$') LastName
10 FROM t;
FIRST LASTNAME
Peter Andre
James Dean
Watch Man
Jenna Klare
James Smith
Tina Adams
Blair Witch
7 rows selectedor
SQL> with t As(Select 'Peter Andre' Name From Dual union all
2 Select 'James Dean' Name From Dual union all
3 Select 'Watch Man' Name From Dual union all
4 Select 'Jenna Klare' Name From Dual union all
5 Select 'James Smith' Name From Dual union all
6 Select 'Tina Adams' Name From Dual union all
7 Select 'Blair Witch' Name From Dual)
8 SELECT Substr(Name,1,Instr(Name,' ',1)-1) First
9 , Substr(Name, Instr(Name,' ',1)+1) LastName
10 FROM t;
FIRST LASTNAME
Peter Andre
James Dean
Watch Man
Jenna Klare
James Smith
Tina Adams
Blair Witch
7 rows selectedRegards,
Christian Balz
Edited by: Christian Balz on 17/06/2009 15:33
Similar Messages
-
SQL update one column from another column
I'm looking for a way to update a SQL column with a portion
of info from another column in the same table.
example of a sql command
UPDATE table1
SET table1.columnname1 = table1.columnname2
FROM table
WHERE blah blah blah
Here's the thing... I only need a portion of the data found
in the source column. I'm not sure how I would do this then.
for example, the database has countries and states combined
into one column like this 'US-DC', 'US-CA', US-FL', etc. I want to
separate these into two columns, a country column and a state
column.... and I dont want to go though all the results and do this
line by line. How would I write the SQL command so that it puts
just the country in the country column, and puts just the state in
the state column, and it omits the dash all together.
any ideas?It depends. Are you using PHP and mySQL or ASP and SQL?
If you are using mysql and PHP you could use the following
code to loop through all records in your datatbase.
$sql="SELECT * FROM tablename"; //SET tablename to the name
of your database table.
$result=mysql_query($sql)or die(mysql_error(). " - $sql");
for($x = 0; $row=mysql_fetch_assoc($result); $x++){
//set up the variables from the table
$ID=$row['ID']; //this is the primary key
$var1=$row['contrystatecolumn']; //this is the name of the
column which holds the country-state
$var2=explode("-", $var1); //now we explode the string to get
the country and the state seperated and place the results into an
array
$country=$var2[0]; //this is the first piece of the exploded
string in the array
$state=$var2[1]; //this is the second piece of the exploded
string in the array
//now we update the database record with the new information
//remember to replace the tablename with your actual table
name and the columns country and state with the acutal names of
your columns in your table
$sql2="UPDATE tablename SET country='$country'.
state='$state' WHERE ID='$ID'";
$result2=mysql_query($sql2)or die(mysql_error() . " -
$sql2");
This code will loop through every record in your table and do
what you want very quickly.
Hope this helps
Stan Forrest
Senior Web Developer
ATG Internet -
How to update one table from another
I am creating scripts in Oracle 10g. I have a table that has data corruption on three date fields.
I created a table with the following sql of all the affected rows:
CREATE TABLE LSU_INTER_FIX_DATE AS
select request_id,received_date,planned_start_date, actual_start_date
from lsu_inter2_requests_t
where received_date < to_date('01-JAN-1900')
OR planned_start_date < to_date('01-JAN-1900')
OR actual_start_date < to_date('01-JAN-1900')
I then repaired all of the rows with three data fixes
UPDATE LSU_INTER_FIX_DATE
SET received_date = TO_CHAR(received_date,'YY-MON') ||'-'||(TO_CHAR(received_date,'RRRR') + 2000)
where received_date < to_date('01-JAN-1900')
UPDATE LSU_INTER_FIX_DATE
SET planned_start_date = TO_CHAR(planned_start_date,'YY-MON') ||'-'||(TO_CHAR(planned_start_date,'RRRR') + 2000)
where planned_start_date < to_date('01-JAN-1900')
UPDATE LSU_INTER_FIX_DATE
SET actual_start_date = TO_CHAR(actual_start_date,'YY-MON') ||'-'||(TO_CHAR(actual_start_date,'RRRR') + 2000)
where actual_start_date < to_date('01-JAN-1900')
I now want to update the original base table with the corrected data so I wrote the following SQL UPDATE command:
UPDATE lsu_inter2_requests_t aaa
SET aaa.received_date = bbb.received_date
FROM LSU_INTER_FIX_DATE bbb WHERE aaa.request_id = bbb.request_id
When I run this sql Oracle returns the error “ORA-00933 SQL command not properly ended.” How do I update multiple rows in one table from another table that share the same primary key?Comet wrote:
I am creating scripts in Oracle 10g. I have a table that has data corruption on three date fields.
I created a table with the following sql of all the affected rows:
CREATE TABLE LSU_INTER_FIX_DATE AS
select request_id,received_date,planned_start_date, actual_start_date
from lsu_inter2_requests_t
where received_date < to_date('01-JAN-1900')
OR planned_start_date < to_date('01-JAN-1900')
OR actual_start_date < to_date('01-JAN-1900')
I then repaired all of the rows with three data fixes
UPDATE LSU_INTER_FIX_DATE
SET received_date = TO_CHAR(received_date,'YY-MON') ||'-'||(TO_CHAR(received_date,'RRRR') + 2000)
where received_date < to_date('01-JAN-1900')
UPDATE LSU_INTER_FIX_DATE
SET planned_start_date = TO_CHAR(planned_start_date,'YY-MON') ||'-'||(TO_CHAR(planned_start_date,'RRRR') + 2000)
where planned_start_date < to_date('01-JAN-1900')
UPDATE LSU_INTER_FIX_DATE
SET actual_start_date = TO_CHAR(actual_start_date,'YY-MON') ||'-'||(TO_CHAR(actual_start_date,'RRRR') + 2000)
where actual_start_date < to_date('01-JAN-1900')
I now want to update the original base table with the corrected data so I wrote the following SQL UPDATE command:
UPDATE lsu_inter2_requests_t aaa
SET aaa.received_date = bbb.received_date
FROM LSU_INTER_FIX_DATE bbb WHERE aaa.request_id = bbb.request_id
When I run this sql Oracle returns the error “ORA-00933 SQL command not properly ended.” How do I update multiple rows in one table from another table that share the same primary key?I am not convinced you have what you think you have
>
UPDATE LSU_INTER_FIX_DATE
SET received_date = TO_CHAR(received_date,'YY-MON') ||'-'||(TO_CHAR(received_date,'RRRR') + 2000)
where received_date < to_date('01-JAN-1900')
When you want to produce a DATE datatype when starting with a string,
you must use TO_DATE() on the SET line!
(TO_CHAR(received_date,'RRRR') + 2000)since when do you do add characters (from TO_CHAR) with a constant number (2000)?
You should NEVER EVER rely on implicit datatype conversion
Edited by: sb92075 on Jul 27, 2011 7:09 PM -
Update table column from another
Hi,
I´m having trouble updating data from one table to another. I wish to syncronize the geometry field of the table FAROLFAROLIM from FAROLFAROLIM_OUT. By standard SQL I've tried this:
update FAROLFAROLIM f, FAROLFAROLIM_OUT ff set f.GEOM = ff.GEOMETRY
where f.IDFAROLFAROLIM = ff.IDFAROLFAROLIM
Can you help me figuring out what is wrong???
Thanks in advance
Operatordude you are doing wrong thing...
please use following command.
UPDATE FAROLFAROLIM f
SET (f.GEOM) =
( SELECT ff.GEOMETRY
FROM FAROLFAROLIM_OUT ff
WHERE f.IDFAROLFAROLIM = ff.IDFAROLFAROLIM );
cheers,
Sandy -
How to update one table from another table?
Hi,
Please go through the case I am mentioning below and if possible try to provide with a solution.
I am working on a report to generate cash flow forecast, where in one of the fields is "Payroll", in which its being mentioned as:
In the selection screen: I am entering Project ID, profit Center and Period(in MM/YYYY format).
Selection of all entries in table COSP for selected cost elements above, value type 1, version , all periods and for all selected WBS elements and all objects underneath.
From this, update table COFP with information from COSP with value type 62 and same period.
For updation of various fields the following information is being given.
How should we update COFP?
New entries per OBJNR/PERIO and HKONT are required via using the information from COSP:
COFP-MANDT = SY-MANDT
COFP-KOKRS = if COSP-OBJNR begins with PR
Check table PRPS with COSP-OBJNR = PRPS-OBJNR and enter PRPS-PKOKR
If COSP-OBJNR begins with NV
Check table AFVC with COSP-OBJNR = AFVC-OBJNR,
go to Table AFKO with AFVC-AUFPL,
go to table AUFK with AFKO-AUFNR and enter AUFK-KOKRS
If COSP-OBJNR begins with OR
Check table AUFK with COSP-OBJNR = AUFK-OBJNR
and enter AUFK-KOKRS
COFP-BELNR = Check table NRIV, CLIENT = SY-MANDT, OBJECT = RK_BELEG,
SUBOBJECT = COFP-KOKRS, NRRANGENR = 05,
Add 1 to NRLEVEL and begin with 500000000
Use same BELNR for one update-run
COFP-BUZEI = 1 + and 1 in next entry but same update-run
COFP-TWAER = COSP-TWAER
COFP-ZHLDT = always last day of month in field COFP-PERIO
COFP-GJAHR = COSP-GJAHR
COFP-PERIO = if entry in field WKG001 à PERIO = 001
If entry in field WKG006 à PERIO = 006
COFP-WRTTP = 62
COFP-VRGNG = FIPL
COFP-POSIT = Check table SKB1 where SAKNR = COSP-KSTAR and use SKB1-FIPOS
for going to table FMCI-FIPOS and enter FMCI-POSIT
COFP-OBJNR = COSP-OBJNR
COFP-HKONT = COSP-KSTAR
COFP-WKGBTR = WKGXXX
COFP-WKGBTRO = -
COFP-WTGBTR = WTGXXX
COFP-WTGBTRO = -
COFP-WOGBTR = WTGXXX
COFP-WOGBTRO = -
COFP-BUKRS1 = -
COFP-GJAHR1 = -
COFP-BELNR1 = -
COFP-BUZEI1 = -
COFP-BUKRS2 = -
COFP-GJAHR2 = -
COFP-BELNR2 = -
COFP-BUZEI2 = -
COFP-EBELN = -
COFP-EBELP = -
COFP-ZEKKN = -
COFP-ETENRM = -
COFP-STUNR = -
COFP-LIFNR = -
COFP-KUNNR = -
COFP-GSBER = -
COFP-BUKRS = (nearly same as COFP-KOKRS!)
if COSP-OBJNR begins with PR
Check table PRPS with COSP-OBJNR = PRPS-OBJNR and enter PRPS-PBUKR
If COSP-OBJNR begins with NV
Check table AFVC with COSP-OBJNR = AFVC-OBJNR,
go to Table AFKO with AFVC-AUFPL,
go to table AUFK with AFKO-AUFNR and enter AUFK-BUKRS
If COSP-OBJNR begins with OR
Check table AUFK with COSP-OBJNR = AUFK-OBJNR
and enter AUFK-BUKRS
COFP-EINDT = -
COFP-SGTXT = -
COFP-GEBER = -
COFP-KURSF = -
COFP-KUFIX = -
COFP-GBETR = -
COFP-KURSR = -
COFP-KURSFIKRS = -
COFP-KZKRS = -
COFP-UMBKZ = -
COFP-KBLNR = -
COFP-KBLPOS = -
COFP-HI FIVOR = -
COFP-LO FIVOR = -
COFP-HI ACCOUNT = -
COFP-LO ACCOUNT = -
COFP-HI LIFNR = -
COFP-LO LIFNR = -
COFP-HI KUNNR = -
COFP-LO KUNNR = -
COFP-XDELETE = -
COFP-HI XOPVW = -
COFP-LO XOPVW = -
COFP-ZAEHK = -
COFP-CHAINBELNR = -
COFP-MWSKZ = -
COFP-LEDNR = -
COFP-BELTP = 1
COFP-VERSN = 0
COFP-OWAER = COSP-TWAER
COFP-CPUDT = SY-DATUM
COFP-CPUTM = SY-TIME
after doing updation, its again saying Selection of all entries in table COFP with value type 51 to 62, selected year, selected cost elements above and for all selected WBS elements and all objects underneath. Summarisation by period.
Now, can someone help me as how to proceed with the entire thing? An elaborate and illustrative answer would be highly appreciable.
If you require any other information....then get back to me ..asap.
Its bit urgent.
Thanks & Regards,
RaviHi
update <table> from <i_tab>
for different conditions.
loop at i_cosp.
if cosp-mandt eq sy-mandt and cosp-objnr eq 'PR'.
Read table i_PRPS with key i_PRPS-OBJNR = i_COSP-OBJNR.
if sy-subrc eq 0.
update PRPS set PKOKR = ? where objnr = i_prpr-objnr.
endif.
endif.
similarly for all the conditions
Regards
Message was edited by: Harikishore Sreenivasulu -
Update column in one table from another
I've got two tables:
t1:
con_num
con_code
ex
elin
addressee
a few other columns
t2:
con_num
con_code
elin
addressee
contact
a few other columns
I just got about 300 rows into t2 using sqlloader, and now I need to use t2 to update t1. t1 will have 3 rows per ex||elin, but t2 can have more or less rows per elin (which is the same as ex||elin in t1). If t2 has 4 rows per one elin, then that is 4 distinct pieces of data, and I need to make sure that t1 reflects 4 rows in its ex||elin, each containing the addressee||contact from t2. So I'll need to add a row to t1, as well as update 3 rows. Is this possible with just SQL, or do I need to write PL/SQL?
The following is the code I've been trying:
update t1
set t1.addressee =
(select addressee from t2
where t2.con_num = 'number'
and t1.con_code = t2.con_code
and t1.ex ||t1.elin_num = t2.elin_num)
This code is not correct, it returns more than one row from t2. Also, I'd need to concatenate contact onto addressee with a space in the middle, not just addressee, into t1.addressee.
Any ideas, pointers?
Thanks!Forgot some info: Ora8.1.5 on win2kpro. Also, I was wanting to combine addressee||contact in the insert/update statement to differentiate one addressee from another in t1 after the data is inserted. We can have several addressees that are the same, but each one goes to a different contact for each record.
Thanks! -
How can I Move data from one column to another in my access table?
I have two columns, one that stores current month’s data and one that stores last month’s data. Every month data from column 2 (this month’s data) needs to be moved to column 1 that holds last month’s data. I then null out column 2 so I can accumulates this month’s data.
I understand how to drop a column or add a column, how do I transfer data from one column to another.
Here is my trial code:
<cfquery name="qQueryChangeColumnName" datasource="#dsn#">
ALTER TABLE leaderboard
UPDATE leaderboard SET points2 = points3
</cfquery>
Unfortunately, I get the following error:
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in ALTER TABLE statement.
How can I transfer my data with the alter table method?I looked up the Access SQL reference (which is probably a
good place to start when having issues with Access SQL), and
it suggests you probably need a WHERE clause in there.
I agree the documentation is a good place to start. But you should not need a WHERE clause here.
Too few parameters. Expected 1.
If you run the SQL directly in Access, what are the results? At the very least, it should provide a more informative error message.. -
I have never used PhotoShop and do not have time at the present. Please help me to move a section of text from one column to another in a brochure.
Here are 3 options for future reference:
1. With the setup you've described, apply a Match Move behavior to the text and make the rectangle the source. Change the Transform parameter to Mimic source. This way you can still adjust the text postion as needed, but the rectangle will drive the animation.
2. Use a group to do the animation. Put both your rectangle and text in the same group and animate the group's postion.
3. Use the Link behavior.
Each of these has it's advantages depending on what you need. -
My new Photoshop Elements 12 has a RAW file plug-in, but when I try OPEN to select a photograph, there are only generic icons instead of pictures-- I can't tell one photograph from another! How can I fix this so I can tell which photograph I want to open? Thank you!
Thanks R_Kelly:
Adobe Photoshop Elements Version: 12.0 (12.1 (20140303.12.1.49334)) x32
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:15, Stepping:11 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 4
Processor speed: 2400 MHz
Built-in memory: 3069 MB
Free memory: 1631 MB
Memory available to Photoshop Elements: 1598 MB
Memory used by Photoshop Elements: 69 %
Image tile size: 128K
Image cache levels: 8
Video Card: ATI Radeon HD 4800 Series
Video Mode: 1680 x 1050 x 4294967296 colors
Video Card Caption: ATI Radeon HD 4800 Series
Video Card Memory: 512 MB
Application folder: C:\Program Files\Adobe\Photoshop Elements 12\
Photoshop Elements scratch has async I/O enabled
Required Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Plug-Ins\
The first thing I did was UPDATE. I have all the latest updates available (according to the updater). The Camera Raw Plug-in says it is version 8.0.
The RAW files are from a Canon T3i. It's a very common camera, I can't believe it wouldn't be supported. -
How do I subtract one sum from another and show a balance in another box
In numbers how do I show the difference in total from one column and another as a balance amount?
=SUM(range_one)-SUM(range_two)
Details available in iWork Formulas and Functions User Guide.
Yvan KOENIG (VALLAURIS, France) samedi 9 juillet 2011 15:45:36 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
How to kill one class from another class
I need to dipose one class from another class.
So that first i have to find what are all threads running in that class and then to kill them
Assist me.Subbu_Srinivasan wrote:
I am explaining you in clear way
No you haven't been.
>
In my application i am handling many JInternalFrame.Simultaneously i am running working on more than one frame.
Due to some poor performance of some thread in one JInternalFrame,the thread is keeps on running .
i could not able to proceed further on that screen.
So i have to kill that JInternalFrame.Yoinks.
To be begin with your problem sounds like you are doing everything in one thread. So stop doing that. Second when you get it split up and if a task is taking too much time then interrupt it. No kill. Interrupt. This means the worker thread needs to check sometimes if it has been interrupted. -
How to refer one view from another view?
Hi,
I have 2 views in my Adobe Flash Builder mobile app. I need to refer the first view in my second view.
How to refer one view from another view? Or how to create a reference to a view wherever needed?I don't need any data from my first view. In a certain flow, I need to make my first view to be invisible.
for eg., My First view is in portrait mode. I change the device to Landscape. In the landscape mode, I want to show a completely different view (second view).
In this case, what happens is, I see my first view in Landscape mode for a second. Then the second view appears. When I change to Landscape mode, only the second view should be seen. I need to make my first view to be completely invisible in the OnOrientationChanging event of
StageOrientationEvent
As stage object and StageOrientationEvent works at application level, I need to know how to refer my first view object in the application level.
private function onOrientationChanging(soe:StageOrientationEvent):void
MyFirstView.Visible = False; ====> don't know how to refer MyFirstView here
Is my question clear now? -
How to Call one EJB from another
Hi all
I am trying to call one EJB in one system from another EJB residing on diferent system...
Both are Stateless session beans ...
I can't use No-args Intialcontext() as i need to specify the Ip address of other system to be looked up.....
So i am using properties Dorg.omg.CORBA.ORBInitlalHost....
But its not looking up..Its telling not bound...But i called it from standalone client remotely...
Am i wrong..?
I hope I am in right path....
I hope ill get reply as fast as possible...
Gopal VHi ken Thanks for replying....
Ya i packed it as a jar (using Export tool in Eclipse3.2)....
I am using SUN AS 9.....
I packed bean1 and bean2 as two different jars in the same domain...
Here is my code...
Bean1:
@Stateless(mappedName="ejb/Second")
public class SecondIMPL implements SecondRemote {
public FirstRemote obj;
public String connect() {
try{
InitialContext ctx= new InitialContext();
FirstRemote obj =(FirstRemote)ctx.lookup("ejb/First");
System.out.println("Client :"+obj.bMethod());
}catch(Exception e){
e.printStackTrace();
return "Check server Log";
}Bean2 :
@Stateless(mappedName="ejb/First")
public class FirstIMPL implements FirstRemote {
public String bMethod() {
return "From First Bean";
Client:
public static void main(String[] args) {
try{
InitialContext ctx= new InitialContext();
SecondRemote obj =(SecondRemote)ctx.lookup("ejb/Second");
System.out.println("Client :"+obj.connect());
}catch(Exception e){
e.printStackTrace();
Here is my Stack Trace...
[#|2007-05-24T18:35:17.214+0530|WARNING|sun-appserver-pe9.0|javax.enterprise.system.stream.err|_ThreadID=18;_ThreadName=p: thread-pool-1; w: 19;_RequestID=bb4848e7-829a-421d-a560-93659898eb02;|
javax.naming.NamingException: ejb ref resolution error for remote business interfacecom.SecondRemote[Root exception is java.lang.ClassNotFoundException: com.SecondRemote]
at com.sun.ejb.EJBUtils.lookupRemote30BusinessObject(EJBUtils.java:350)
at com.sun.ejb.containers.RemoteBusinessObjectFactory.getObjectInstance(RemoteBusinessObjectFactory.java:61)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:314)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at com.FirstBean.rediff(FirstBean.java:16)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.security.application.EJBSecurityManager.runMethod(EJBSecurityManager.java:1050)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:165)
at com.sun.ejb.containers.BaseContainer.invokeTargetBeanMethod(BaseContainer.java:2766)
at com.sun.ejb.containers.BaseContainer.intercept(BaseContainer.java:3847)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:190)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy36.rediff(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:121)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:650)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:193)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1705)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1565)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:947)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:178)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:717)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:473)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1270)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:479)
Caused by: java.lang.ClassNotFoundException: com.Second
at com.sun.enterprise.loader.EJBClassLoader.findClassData(EJBClassLoader.java:701)
at com.sun.enterprise.loader.EJBClassLoader.findClass(EJBClassLoader.java:614)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at com.sun.ejb.EJBUtils.getBusinessIntfClassLoader(EJBUtils.java:568)
at com.sun.ejb.EJBUtils.lookupRemote30BusinessObject(EJBUtils.java:320)
... 31 more
|#] -
How to call one .SWF from another?
How do I call one .SWF from another. I built a very beefy
base .SWF, and want to add music overlay, and an intro slide show
to the exsting Flash animation, but put it in a second .FLA/.SWF
file. How do I call one from the other?
This will be embedded in an HTML file but I assume this is
superfluous to my question.
F.Z.I think you should open that Another SWF (FLA),
and add some actionscript..
For example, you could create a movie clip, and write
actionscript in the
first keyframe:
loadMovie("
http://www.somewebpage.com/movie.swf",
this);
"FredZimmerman" <[email protected]> wrote in
message
news:ftnjas$mj5$[email protected]..
> How do I call one .SWF from another. I built a very
beefy base .SWF, and
> want
> to add music overlay, and an intro slide show to the
exsting Flash
> animation,
> but put it in a second .FLA/.SWF file. How do I call one
from the other?
>
> This will be embedded in an HTML file but I assume this
is superfluous to
> my
> question.
>
> F.Z.
> -
How can i access all the objects of one schema from another schema
Dear All,
How can i access all the objects(Tables,Views,Triggers,Procedures,Functions,Packages etc..) and do the modifications of one schema from another schema (Without using synonyms concept).
Thanks in advance,
MahiFirst of all, synonyms only help you easy reference the object. It doesn't have any implication of object privilege.
As long as you have proper privilege on target object. You can access it with or without synonyms.
Assuming you have proper privilege of objects, you can use following command to assume schema owner.
ALTER SESSION SET CURRENT_SCHEMA = Schema_owner
Maybe you are looking for
-
Premiere Elements 12 crash, lost all saved data on a new project.
I was working on a short project that had many video and audio clips. About 3 hours into the project Premier Elements 12 crashed. Now It will not open the saved data. It simply tells me "An unknown error occurred while opening the project" Am I SOL?
-
VA01 ATP incorrecct results when delivery date is programmatically changed
Hi Guru's, When creating or modifying a sales order (VA01 & VA02), we need to programmatically assign the delivery date a) for certain customers or b) when the delivery priority is changed from downs to regular order and visa-versa. For examples: 1)
-
Using Other Languages and fonts in Photoshop and Illustrator
I would like to be able to type in romanian as well as english, and do not know how to type using special characters in photoshop and illustrator. 1)How would I go about doing this? 2) How do I upload new fonts to these programs? Would very much appr
-
2 finger pinch and 3 finger scroll stopped working
Spontaneously my 2 finger pinch and 3 finger scroll have stopped working. 4 finger not working either 2 finger right click works ok as does 2 finger scroll. I haven't changed any settings and my software updates are fine. Have tried deactivating them
-
FCPX is doing funny things to PNGs with alpha channel.
I am currently working on a video that requires lots of compositing using PNGs with transparency. Everything was fine, until I decided to render. Then this happened: Some of the PNGs turned into a bunch of pink blocks, as if the file were corrupted.