Update organizational model from ERP

Hi experts!
I have a requirement for which the organizational model in CRM needs to be updated according to the updated one in ERP.
Is there an automatic delta update?
I am a newbie in CRM so any documentation concerning the Organizational Model Customizing would be very helpful.
Thank you all in advance!!

Hi Grigoria.
CRM only allows one first download of SD structure from R/3/ECC into CRM. Any changes in the organizational model on R/3 side (new sales office, new sales group, new combination allowed of distribution channel, division, etc) needs to be done manually on CRM side.
This is being in this way since first CRM releases and doesn't seems that SAP is going to create any new procedure to change this. I guess it's tecnically difficult because of these information on CRM side is as master data records.
Regards,
Susana Messias

Similar Messages

Update Entity Model from Database in edmx

Dear All
Thank you for your attention.
I would like to know the easy way to modify the edmx after changes of database.
e.g. I modified a order table 's primary key from OrderNumber to ID
and so the foreign key constraint to another table is also changed from OrderNumber to ID
then open existing edmx and 'Update Model from Database'.
The tables are changed but there are errors
Error 1
Error 111: Properties referred by the Principal Role t1 must be exactly identical to the key of the EntityType Model.t1 referred to by the Principal Role in the relationship constraint for Relationship Model.FK_t2_t11. Make sure all the key properties are specified
in the Principal Role.
and two relations exists
How to modify the current edmx to let it works?
Thanks
Best Regards
mintssoul

Hello mintssoul,
>>I would like to know the easy way to modify the edmx after changes of database.
I suggest you could firstly delete these modified entities in the design window(it will delete these type definition in emdx file) and then use Update Model from Database command to re-generate these entities.
Regards,
Fred.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Organization Model download from R/3 to CRM

Hi Guys
We are maintaining the complex Organization model in R/3 system and we need to Download the complete organization Model from R/3 to CRM and its relevant Organization structures too. I could not found a way what is the download object to be used to download the Organization model from R/3 to CRM .
will the Transaction CRMC_R3_ORG_STRUCTURE download the Organization model also , and what is the prerequisites for this organization model download
Thanks in advance
Warm regards
Rajasekhar

Dear Jayesh
1) Do the ALE specific settings like creating Logical systems , Rfc destination,
Distribution Model .
2) Specify the filters in the distribution model as per the note 312090, 550055
3) below link will be usefull to u
/people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1
Warm regards
Rajasekhar

Transfer Purchasing Organization from ERP to MDM

Hi friends.
In the SRM Scenario, Im want to transfer pur.org and suppliers.
How do I transfer Purchasing Organization values from ERP to MDM?
Also how do I transfer Suppliers from ERP to MDM?
Regards
Bala

Purchasing Organisation can be transferred from ERP to MDM using Transaction MDMGX (standard scenario).
And you can transfer Suppliers from SRM to MDM using standard report and PI interface.
Why you want to transfer Suppliers from ERP to MDM. Is there any specific requirement for this??? if yes, please can you explain the business process. I am curious to know this.
Regards,
SHiv

Issue with HR Distribution Model from ECC to CRM

Hello Gurus,
I am replicating employees from the ECC to CRM. I followed the C05 u201CCRM Organizational Model with ERP HR Integrationu201D Best Practice. Initially employees replicated without any trouble from ECC QAS to CRM DEV. The issue came since we also created a replication model from ECC QAS to CRM QAS.
Even dough each replication model has defined each corresponding receiver system (CRD and CRQ), since we created the new distribution model, employees are now only replicating to CRM QAS which was the last created distribution model.
Since we only have data en ECC QAS we have use this same system for the CRD and CRQ. The question here is: Can we only have one distribution model? Is there any way to achieve employee replication also to CRD?
Extra Information: When using PFAL for replicating, I´m using object P and after executing the systems confirms in green the replication for both systems. But when I a search the HRXX in CRD I didn`t find it I just found it in CRQ.
Thanks for your comments on this.
Points will be reawarded

Dear Kumar,
you should not schedule RBDMIDOC before you have done the initial distribution because the most of the idocs will run into error (if new objects are created in ECC the distribution will create correct data in CRM; changes on existing objects will run into error because the object has not been created by distribution of essential data).
Before scheduling the idoc creation from change pointers you should have done the intitial distribution of organizational data and employees using the procedure described in note 363187.
Regards,
Michael

Error while generating Distribution Model in ERP to EWM

I am trying to generate new distribution Model from ERP to EWM for my warehouse.
In system one distribution Model already exists for another warehouse. Below error encountered.

Hi Suraj,
Thanks for the answer
Yes i was using the Wrong Distribution Model , I should have selected EWM , but i was giving some new name as i thought that was required. Hence message came.
I did with EWM distribution Model and all worked well.
Thanks
Inder

How to transport organization model

Hi Experts...
how to transport organization model from development server to testing server in CRM FUNCTIONAL MODULE.
Thnx..

Hi ,
Refer to this thread:
[Transport of Organization Structure;
Cheers, Satish

Problem to assign BP in organization model

Hi sap
I have configured the service desk in solution manager.
I create my organization model from transaction ppoma_crm.
Now I think that I must assign business partner to organization units (first level support, second level support ..) but I can't do it.
Anyone know can please tell me if exist a document that show step by step procedure to create a oranization model, assign business partners and cretate automatic assigment of message?
thanks in advance
best regards

Hi Giovanni,
have a look at /people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
Regards

Organisation model From Enhanced mode to Standard mode

Hi Guys,
if there is a program which converts organization model from Enhanced mode to Standard mode
What does it mean ?? Functionally can anybody explain me
Points guaranteed....
Rgds,
Aryan.

Sorry, that isn't a Firefox support issue. Try using a Windows support forum for help with that issue.
http://lounge.windowssecrets.com/index.php

Enhanced Organizational Model

Hi Experts,
We have switched to the Enhanced Organizationa model. After this, We have downloaded Organizational Model from ECC using the program CRM_ORGMAN_R3_ORGDATA_GENERATE. Report result shows the multiple assignments for Sales groups to the Sales offices. but in PPOMA_CRM transaction, these assignments are not visible. Any specific reason for this?
Thanks and Regards,
S Reddy

Hi Amit,
thanks for response,
we have downloaded the Org model, All the Objects were created and visible in PPOMA_CRM. even Multiple Assignments of sales groups to the sales offices are visible in report results and the table HRP5551A, but they are not visible in the PPOMA_CRM transaction.
thanks and regards,
S Reddy

Correct process for updating CRM Z fields from ERP Z field.

I currently have an accounts block with a field (Region) which has a drop-down list box containing values, plus another field containing the description/name of the region. Based on other fields within this same block I need to replace the Region and its description with a single value which should be sourced from an ERP Z table, or joined Z tables if I include the description as well.
I believe that I know how to change the attributes of the Region field using the AET, although I can't see anything which displays or allows me to displable the drop-down list of values, although I'm sure I've seen a video demonstrating the AET being used to create a list of lookup values.
Anyway, what I need to do is to change the Region field, making it and its description field Read-only, remove the list of values option so there's no drop-down list box against the Region field, and also update this field from an ERP Z field. Can this all be done using either the AET or EEWB, or is there some code required to be manually entered, and if so, what transactions need to be used to do this?.
Any help would be much appreciated.
Jason

MIcha,
With regards to youe 9 steps that gave.
I am looking at component BP_ADDR and view BP_ADDR/StandardAddress. However, there are no enhancements shown when I click on the [Enhance Component] button. So I assume that I need to create an enhancement in order to change the code. Does this enhancement create am implementation or does it create replacement code?. The reason for asking this is that the code shown against the View_controller->Content->Content_Nodes->STANDARDADDRESS->Attributes->STRUCT.REGION->GET_V_REGION method is as follows::
METHOD GET_V_REGION.
DATA:
    lv_fieldname            TYPE name_komp,
    lt_fieldname_additional TYPE crmt_attr_name_tab.
lv_fieldname = 'COUNTRY'.                                 "#EC NOTEXT
INSERT lv_fieldname INTO TABLE lt_fieldname_additional.
lv_fieldname = 'COUNTRY_TEXT'.                            "#EC NOTEXT
INSERT lv_fieldname INTO TABLE lt_fieldname_additional.
lv_fieldname = 'REGION_TEXT'.                             "#EC NOTEXT
INSERT lv_fieldname INTO TABLE lt_fieldname_additional.
CALL METHOD cl_crm_uiu_bp_cust_get=>GET_VHELP_FOR_REGION_VATTR
    EXPORTING
      iv_index                = iv_index
      it_fieldname_additional = lt_fieldname_additional
    RECEIVING
      rv_valuehelp_descriptor = rv_valuehelp_descriptor
    EXCEPTIONS
      OTHERS                  = 0.
ENDMETHOD.
The above call gets the value helps and if I replace this code how can I also ensure that the value-help pull down icon does not appear next to the Region field, as all I'm attempting to do here is replace the code. In other words where do I update the screen to say that this field is no longer a value help field?. I wondered if this code actuallypoints the pull-down icon next to the Region field, although I suspect all it does is physically display the list of values and allows you to select one.
So, I need to determine how I can create an enhancement. I've just been trying different things in the BSP_WD_CMPWB tranx but have not found out yet how this is achieved, although I think this is achieved via the creation of a new View set, but am not 100% sure.
Jason

Customer name is not updating in Organization model

Hi All,
One employee is created with the name "test customer" in ECC and it is assigned to organization model in CRM. After that the the employee name is changed fom test customer to __customer test. Now same changes is updating in CRM but not updating in Organization model?
can you plz tell me why the employee is not updating in Organization model?
Edited by: prajesh24 on Jun 16, 2011 11:08 AM
Edited by: prajesh24 on Jun 16, 2011 11:32 AM

Hi
The changes to the business partner data flows through the middleware in run time.
But if you assigned the user with some initial name as XYZ. Then change the name of the business partner to X1Y1Z1, then you need to remove the earlier entry in the name of XYZ and assign the new entry X1Y1Z1 manually.
As a standard, it will not update the name in the organisational data in CRM.
Hope this will be helpful.
Regards

Update Model from database does not update Nullable Property -- Possible bug?

Hi,
I don't know if this is the correct forum.
When updating Model from database seems does not update the entity nullable property.
and it will not update the Default Value from the Backend (MSSQL) also.
I am using VS2008 SP1 3.5EF, XP64Bit Machine.
Thanks
vb.net GUI

maybe related..
today.. i changed the PK size.. from char(10) to char(36)
got many problems.. easy to fix...
but some query stop working:
Table1Record.Table2Reference.Load(); //i'm trying to load table2 from table1..
throw this error: A relationship multiplicity constraint violation occurred: An EntityReference expected at least one related object, but the query returned no related objects from the data store.
i get this error only when PK is greater than char(10)...
with SQL profiler.. i saw that PK was truncated to char(10) :
exec sp_executesql N'SELECT [... some fields...]
FROM [dbo].[Table1] AS [Extent1]
INNER JOIN [dbo].[Table2] AS [Extent2] ON [Extent1].[NoTable2] = [Extent2].[NoTable2]
WHERE [Extent1].[NoTable1] = @EntityKeyValue1',N'@EntityKeyValue1 char(10)',@EntityKeyValue1='a2164b14-e'
(NoTable1 is the PK changed from char(10) to char(36))
i'm working with VS.NET 2008
so, i looked at Model1.Edmx... in notepad
CSDL was not changed when i did the "Update Model from Database" !!!
here is SSDL part:
        <EntityType Name="Table1">
          <Key>
            <PropertyRef Name="NoTable1" />
          </Key>
          <Property Name="NoTable1" Type="char" Nullable="false" MaxLength="36" />
here is CSDL part:
        <EntityType Name="Table1">
          <Key>
            <PropertyRef Name="NoTable1" />
          </Key>
          <Property Name="NoTable1" Type="String" Nullable="false" MaxLength="10" Unicode="false" FixedLength="true" />
Cool.. i found the prob.... but why ? and how to correct this ? manually change Model1.Edmx in notepad ??
why the maxlength property is readonly in Model Browser pane ??
what about VS.NET 2010 ?! same prob ??
is it a bug or by design ?
I hope this can help someone.. I spent a few hours on this prob
Patrick

Organization structure From CRM -- ERP

Hi
Can we replicate Org structure from CRM system to ERP system.
If Possible Please tell me when such requirement comes.
and also prvovide me the steps or config guide to carry out replication from CRM to ERP system if such process is possible?
thanks

Hi Michael,
Thanks for prvoidng me suggestions.
I think you have not understood my questions. I already worked with replication of Org structure from ERP to CRM.
But i dont have idea about replication of Org structure from CRM to ERP.
My question is
1 Can we replicate Org structure from CRM to ERP.
2.If yes when that situation comes. also How.
Thanks for your understanding.
regards,
Sunil

How to replicate a customer from ERP to a Person in CRM

Hi,
I am doing an implementation of CRM 7.0 and have to integrate it with an existing ERP (ECC6) system. I've set up the replication of the Business Partners to replicate two of the Account Groups in ERP to CRM and it is working well. The only problem is that the customers in the ERP system are Organizations and Persons. When the replication takes place, all are created as Organizations (role sold-to Party).
Is there a way to replicate customer data from ERP and have the BP in CRM created with BP Category 1 (Person) in stead of 2 (Organization)?
The customers in the ERP system are not consumers.
Thanks
Jeanine

I logged an OSS for this problem and SAP replied with the following:
"What you've explained is a standard behavior of the system.
Since CRM and R/3 have different BP data models, all BPs from R/3 are
transferred to CRM be default as Organizations.
An only exception is BPs, which are assigned into account group, which
is mapped into classification "Consumer: persons".
Customers downloaded to CRM will always be interpreted as Business
Partners of the type organisation.
Customers in R/3 are Organisations and are subsequently replicated to
the CRM system of the BP Type - Organisation, therefore the standard
scenario is that customers downloaded from R/3 are replicated as
Business Partners of type Organisation.
If you don't want to use functionality of Consumers, it's also
possible to change the category with a modification by
appending the R/3 outbound processing or the CRM Inbound processing
this would change the organisations to persons, and is possible by
changing the category in the complex structure from 2 to 1 by copying
the organisational data to the personal data, the category change
works only before the creation of Business Partners in CRM, for
existing BPs that have been downloaded, it would be necessary to
delete these BPs using Note 415007 and start the download again after
modifying the User-Exits.
The data sent from R/3 are mapped into a complex structure of type
BUS_EI_MAIN. In CRM table CRMC_BUT_CALL_FU you can add an own
function module for event "CRM INBOUND" and a position less than
100000. Here you can you can change the field
C_BP_STRUCT-CENTRAL_DATA-COMMON-DATA-BP_CONTROL-CATEGORY from 2 to 1
depending on other data that is available in this structure.
Additionally you have to map the organisation specific data
C_BP_STRUCT-CENTRAL_DATA-COMMON-DATA-BP_ORGANIZATION into the
person specific data
C_BP_STRUCT-CENTRAL_DATA-COMMON-DATA-BP_PERSON and initialize the
organizational data. Be sure to check the category before doing this,
because the initial download sometimes forces partial processing
in case of errors and tries to reprocess the BPs that don't have errors
So your mapping from organizational data to personal data should be
done only once.
This solution only works if the criteria is available in the structure
BUS_EI_EXTERN. If it is not, you can add an User Exit in R/3 in the
R/3 outbound processing at event DE_BCS2S in the tables TBE24
(definition of product) and TBE34 (definition of your module).
Unfortunately the data are only available as BAPIMTCS structures
and you have to look for a structure
with BAPIMTCS-TABNAME = 'BSC_MAINCE' to change the category.
See module PI_BP_MAIN_TO_BAPIMTCS in order to understand this mapping."
We will do the cutomization and test, but I think this is the only solution.
Regards
Jeanine

Update organizational model from ERP

Similar Messages

Maybe you are looking for