Update PB00 via MEK1 and MEK2

When I update PB00 via MEk1 and MEK2, these fields do not populate:
NumeratorForConvers.          KUMZA
Denom.for conversion          KUMNE
Base Unit of Measure                          MEINS
Does this cause issues?
Is there a way to populate the fields
thanks

Hi
For your condition type check in M/06 in control data-1, calculation type should be C and in scales tab scale basis should be c.
Then it works fine
Regards
Antony

Similar Messages

Tried to update iphone via itunes and now all stopped working

So, after some issues with drivers over the weekend, I decided today to finally update iphone.
Attached phone to laptop, started upgrade.
Now it has completely frozen with the itunes icon on the screen alongwith a usb cable.
According to itunes the phone is in recovery mode and needs to be restored prior to anything else.
But it simply won't do anything. It has lost and since found the driver again, itunes is working, phone is frozen.
Apparently the best driver is installed.
Going to work now, so will check in later.
Cheers all.
G

You will have to restore. If the option is there or available forst back up your device to itunes. After the backup is complete you may backup from restore. This will restore your device whilst at the same time keepin all of your previous data. nothing will be wiped off.

After iOS 6 my games won't load at all, even after updating them via iTunes and the maps really are garbage. How can I get my games back?

I can't play WWF, Hanging or Scramble (all Zynga).

Empty/corrupt library after upgrade/crash/downgrade
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these (or the one created when you upgraded to the version you are downgrading from) and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

Right click on your device icon on the left pane of iTunes and click on transfer pur....

Updated bios via Live Update and now my Network card isn't detected

I have an msi Z87-GD65 Gaming Motherboard and I updated some drivers and the bios via msi Live Update 6 last night and now my computer refuses to recognize my network adapter. The adapter is a TRENDnet N600, plugs into PCIe if I'm not mistaken. Wifi if my only option with this computer, I can't use ethernet, so it's really important I get the network card working again. I have had zero issues with it until this.
The reason I was updating was to try to get my third monitor to work when plugged into the mobo, while my other two were plugged into the graphics card (which I also installed yesterday, but it's working fine). Note that it still was not working, but I had enabled the IGD Multi-Monitor from bios.
Any suggestions would be appreciated. I did try uninstalling the drivers but it still won't detect the network card. I also tried disconnecting and reconnecting the network card (and I cleaned the port for good measure).
I've only been using Windows computers for a year, so bear with me if there's stuff I don't know. Thanks in advance. I can try to get a full list of what was installed later tonight, but all of it that I can find has been uninstalled at this point.
Note: I did not flash the bios when I installed, which I have now heard is a bad idea, apparently. l:

what OS you are running?
Quote
Note: I did not flash the bios when I installed, which I have now heard is a bad idea, apparently. l:
you said you've updated drivers & BIOS:
Quote
I updated some drivers and the bios via msi Live Update 6 last night and now my computer refuses to recognize my network adapter.
can you clarify is you update BIOS too or not?
and what is your current bios version?
Quote
and I updated some drivers
what kind of drivers?
Quote
I did try uninstalling the drivers but it still won't detect the network card. I also tried disconnecting and reconnecting the network card (and I cleaned the port for good measure).
have you tried to load last good known configuration or the last windows restore point?
or to reinstall OS?

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. Any suggestions please?

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
Or any other suggestions please? Thanks

As pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.

My iphone cant restore or update and currently in recovery mood. The story is when i update my iphone from ios 7.0.3 to latest update via itunes and it said my download was corrupt. Then, my iphone being in recovery mood and cant be update.How to..??

I had tried and restore again and again via itunes and it said the same answers. My donwload was corrupt. I try with manual restore (shift + restore) in itunes and it failed already and the popup window said "my iphone cant restore iphone. Unknown error (14)." For now, my iphone still in recovery mood and the logo connect to i tunes appear when i switch on. I tried use another usb, another computer and another port to restore this but all method was failed. What the problem? Help me.

Hi there besiburuk,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
-Griff W.

I tried to install an update of my ios via itunes and my phone was totally cleared. right now im trying to activate it again, its not working. what can i do?

i tried to install an update of my ios via itunes and my phone was totally cleared. right now im trying to activate it again, its not working. what can i do?

You will need to restore the software via the following procedure:
Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings.

Had a hard time all of sudden opening photos in PS via Bridge. Updated all my software and now halfway through editing a photo, my actions don't work properly. Should I remove all programs and re-install?

Had a hard time all of sudden opening photos in PS via Bridge. Updated all my software and now halfway through editing a photo, my actions don't work properly. Should I remove all programs and re-install?

<moved from Adobe Creative Cloud to Photoshop General Discussion>

TS3694 When I try to update my ipad to IOS6 I get and error 6 message. Any idea what that means and how to fix it? I tried updating via Itunes and also normal download.

When I try to update my ipad to IOS6 I get and error 6 message. Any idea what that means and how to fix it? I tried updating via Itunes and also normal download.

What model iPad and what version of iOS is it currently running?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Message was edited by: Texas Mac Man

How do you find out the contacts that were updated via Facebook and twitter in the settings without having to figure it out manually?

How do you find out the contacts that were updated via Facebook and twitter in the settings without having to figure it out manually?

There is no such list of what is downloaded to each phone except in the backup. So if you have a recent backup of each phone you should be able to find an app that reads the backup files and would tell you what list is saved of the content on each phone.

How do I contact Itunes support via email so that they allow me to update my iphone apps and billing information?

How do I contact Itunes support via email so that they allow me to update my iphone apps and billing information?

See Here > Apple Support iTunes Store Contact Us

My iPad is not charging via PC and iTunes on the PC (latest software update, both PC and iPad rebooted) - charges only via AC adaptor

My iPad is not charging via PC and iTunes on the PC (latest software update, both PC and iPad rebooted) - charges only via AC adaptor - any ideas?

The quickest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes.
 Cheers, Tom

I have iphone 4 os 7.04, tried updating to 7.1, but continously shows error that I dont have working internet connection, though I have one and tried via wifi and 3g same error comes. The update has been downloaded, agree pressed but no further??

I have iphone 4 os 7.04, tried updating to 7.1, but continously shows error that I dont have working internet connection, though I have one and tried via wifi and 3g same error comes. The update has been downloaded, the page shping license agreement comes. As soon as I press agree, it asks me to wait for verification and then this error that there is no working internet connection comes, even though I have one and it works fine

Try these steps as needed:
Reset phone: press both the home and power buttons, releasing when the Apple logo appears
Settings > General > Reset > Reset Network Settings. You will have to re-enter WiFi passwords
Connect phone to iTunes on your computer and update using iTunes
iOS: How to update your iPhone, iPad, or iPod touch

Updated Facebook via the Apps store. Icon is "grayed" and will not open. It also will not let me delete, to download again. Anyone have this problem?

Updated Facebook via the apps store. Now, icon is "grayed" & will not open, nor will it let me delete it, so I can re-download. Has anyone had this problem?

Do you have another disk or Mac connected that has Pages '09 from the Mac App Store installed? If so, the MAS will "see" it & will report it as installed. Unmount any & all drives, including Time Machine backups, that might have Pages '09 on them & then relaunch the MAS & see if you can download it.

Update PB00 via MEK1 and MEK2

Similar Messages

Maybe you are looking for