Update PC formatted i Pod on mac? and podcast synching questions

I have my 30G iPod formatted for PC, b/c I use it as an external drive. iTunes 7.0.1 on my mac (my home base for synching music, games, podcasts, etc) says it can't update a PC formatted iPod.
I can't synch the game I bought, but that wouldn't be enough to make me try to update to 1.2 if I wasn't having problems with my podcasts synching. Most synch properly, some don't. I get the message that says my software is too old. I can't seem to manually drag the problem 'casts either. They are just regular podcasts, with no chapters or video.
Any advice would be appreciated.
For example, can I download iTunes 7 to a windows machine and update my PC iPod over there? will it wipe all my music? I considered this, but it would be a pain to re-load everything. Would this help the problem?
Thanks, jenn
G5 Mac OS X (10.3.9)
G5   Mac OS X (10.3.9)  

just read a bunch of posts about how updating to 1.2 on a PC might kill my iPod, so I guess I won't even try to update anything for a while.
thanks for the warnings, and oh well on the missed podcasts I guess.
PS- I did try putting the "bad" podcasts into a playlist but that playlist won't copy back to the iPod.

Similar Messages

  • I bought games and music on my ipod touch and then bought a new mac, but i updated my ipod on the new mac and lost all of my games and music and they arent on my computer or my ipod touch:( The apps i bought are not on my old computer either!! please help

    bought games and music on my ipod touch and then bought a new mac, but i updated my ipod on the new mac and lost all of my games and music and they arent on my computer or my ipod touch:( The apps i bought are not on my old computer either!! please help!!! I don't want to buy them all again!!

    - You can redownload yur apps at no additional cost.  See:
    How to redownload purchased apps from the App Store
    - You only get one download of music and it is up to you to make a backup.  However, sometimes if you explain what happens the iTunes store may allow a redownload of music.  You can contact them by starting here and selecting the appropriate topic:
    Apple - Support - iTunes

  • "Lightrrom couldn't update the format of its catalog file and must quit. ..".

    I had no trouble updating my small catalogs but my large one I tried several times. After around 45 minutes I see a dialog box that says
    "Lightroom couldn't update the format of its catalog file and must quit. Your previous catalog will be restored".
    Any help on how I can get LR to open the catalog. No problems with the integrity check. The catalog was working just fine in version 1.0.

    I had the same issue.
    Fortunately I had backed up up my db before the upgrade.
    I exited then restarted LR and created a new db - so it would start.
    With my backup copied to a safe location I then opened the backup db. The conversion completed successfully and everything appears OK.
    Hope this may help
    Rob

  • Since updating to ios 4.3.4 songs and podcasts have speeded up. Music goes faster, people talk faster in podcasts.

    Since updating to ios 4.3.4 songs and podcasts have speeded up. Music goes faster, people talk faster in podcasts.

    In the podcast playing screen there is a box on the left just under the scrubber bar.  It has a 1/2X. 1X or 2X. Those are the playback speeds.  Tap on the box to cycle through and change the playback speed.

  • How to format external drive for mac AND pc use

    hi
    i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
    can i partion one part for ms-dos and part for macos extended?
    cheers
    -j-

    There are a couple of disadvantages with formatting a
    disk as FAT32. Firstly, there is a limit on the file
    size for FAT32. I think it like 2 GB so if you
    capturing video the results will probably not fit
    into this file limit. Secondly FAT32 will not be
    bootable. I alway clone my system to a backup disk as
    bootable. That way if anything goes wrong with my
    system, I can just boot from my backup disk and fix
    it.
    The problem with doing this though is that the drive will not be usable with Windows (which was in the original posting) unless you use the third party MacDrive software on the PC.
    iFelix

  • Best external hard drive format for use with mac and windows?

    This is more of an apple operating system combined with windows operating system question, but being that my OS will upgrade an fluctuate there is not option to choose in the operating system section.
    Anyways to the question(s)
    This whole prbolem came about when my computer started having issues, I want to back it up and whether I can continue to use my laptop or not I will still be owning an apple in the future. I went to buy a hard for back up and got told that it is not as easy as one would think to transfer files from mac OS to windows OS and vice versa. I have a mac, my boyfriend has a windows computer; we share files. Mostly I just copy his files, but once in a while I give him files too. I have read up and talked to people and only found one solution so far to format the external drive to fat 32 or exfat. I think only mac has the exfat option, but works well between both OSs, correct me if I am wrong.
    What is the difference between fat 32 and exfat?
    A user posted some good info about formatting. More specifically .Drives, partitions, formatting w/Mac's + PC's
    https://discussions.apple.com/docs/DOC-3044
    If I do not want to use fat32 or exfat is there a format type that works great for mac saving that I can still at least save files to that were originally on a windows computer? Such as I copy his files from his external drive to my computer and then save them to my external drive.
    Is there a better format for file sharing between mac and windows that does not set a 4GB limit?
    And a silly question, Can you dual format a hard drive?
    Note: This format is for an external hard drive.

    I still do not know which format would be the best. That is so that I can use it easily between mac OSX and windows. Is FAT32 the only true option? How limited is it? I heard it is limited to 4GB file size for windows and 32 GB for Mac. Are there other sources I have not found with more concrete information on the limitations of this format?
    I really do still need this information and I need to back up my drive before I can take the computer in for service.

  • 1 hd with 2 file formats for use between mac and windows?

    Think this is the right forum...
    I want to instal a program onto an external hard drive for use on both mac and windows. The program supports both mac and windows.
    My plan is to get an external hd and partition it in half. One half i will format mac os extended and the other i will format ntfs. I'll instal the mac version on the mac partition and the windows version on the ntfs partition.
    This should work i'm thinking, yes? I.e. when i plug it into windows it'll run the windows installation no problem and when i plug it into the mac it'll run the mac installation no problem?
    Thanks.

    An easier solution might be to just connect the drive to a Windows PC and format it as FAT32. Both Windows (98 and higher) as well as Mac allow full read/write access to FAT32 formatted drives. No need to download any drivers, etc. It just works.
    Yes, this solution is not perfect, but none are. The free NTFS drivers for Mac are not most efficient drivers for speed/performance, the HFS+ drivers for Windows are not cheap, and have their own performance issues, and FAT32 has the limit of file sizes over 2GB (or is it 4GB now?) not supported. No one solution is perfect, but for the many one is better than the others, but it all depends upon their circumstances which is "better".

  • Format external drive for Mac and PC?

    Can I format an external Drive to have 1 partition for OS X and another for my wife to use with her PC?
    thanks!
    ray

    Yes, just use Disk Utility under OS X to create two volumes on it, one Mac OS Ext, the other FAT. Use a Master Boot Record partition scheme (also known as “fdisk”).

  • Just updated to LR5.4 on my mac and the Detail Panel in the Develop module is missing. How to fix?

    How do you fix the missing Detail panel in the Develop module? I just updated on the Mac to LR 5.4.

    Right-click on any RH panel header in Develop and put a check mark next to the Detail panel

  • Tricky stuff: formating hard drive for Mac and Windows

    Don't know how to format an external USB hard drive for these purposes:
    #1. Store a bootable backup for my MacBook (Intel)
    #2. Must be readable and writeable by both Mac OS 10.4 and WinXP (mainly for file storage)
    Can I do 2 partitions, with Mac OS Extended (journal) + GUID to serve purpose #1, and MS-DOS + Master Boot Record to serve purpose #2? My research suggests no, it seems both volumes must use either GUID or MBR? Thanks

    Hi,
    I have two Western Digital external HDs with nearly exactly these specs.
    Partitioned them with GUID partition scheme and have Partition 1 as bootable OSX clone and partition 2 with FAT32 for file storage/sharing between OSX and Windows.
    So, what you want is what I have/use right now.
    Regards
    Stefan

  • .mac and personal domain question

    I'm sure this has been addressed several times, although, I can't find the answer in a quick search...
    I set-up a personal domain on my account. I have several websites going in iWeb, however. Can I still host my personal domain on .mac, but still publish my other sites to my .mac url? How do I switch back-n-forth between my .mac url and my personal domain without messing things up?!
    Thanks so much for the help!
    Cheers,
    Lilly
    Message was edited by: TXlillypad

    How do I switch iWeb to publish to my .mac rather than my personal domain? Is that possible?
    iWeb always publishes to .Mac, nowhere else, regardless of what it says somewhere in the app. You can always reach all your sites via the url http://web.mac.com/username/sitename.

  • Is there a way to sync music from one mac and podcasts from another mac?

    So I have all my music (CD Ripped and iTunes Store purchased) on an iMac at home. I sync a shuffle, nano, video and touch with it. Works great with playlists..
    Now, I have a MBP that I use for work and have been downloading podcasts to iTunes. Can I use one of my iPods (thinking of the Nano), to sync ONLY the music from the home iMac, and ONLY the podcasts from the work MBP?
    Thanks!

    Okay, I said what the ****, and connected the Nano to my MBP.. A breeze, I told it not to sync anything.. Went to the Podcast tab, and told it to sync and overwrite everything.. Seems to work perfectly.. Now lets see what happens when I connect it back to my iMac.. I think I just have to disable the syncing of the podcasts...

  • Updated itunes on mac and now pc ipod unreadable

    using a 30GB ipod
    PC formatted
    using two computers- mac and pc
    on pc, using itunes 6, bought song. but on ipod
    connected to mac
    using itunes without video capability.
    tried to play song through ipod
    itunes says - can't play song without updating itunes
    updated itunes with ipod still attached
    restarted computer
    when restarted- relaunched itunes
    ipod updater came up and said that the ipod could not be updated b/c it was pc formatted
    then only option was to restore.
    do not want to restore ipod on mac. want to use on pc.
    what happened?
    how do i solve this?
    what will happen when i reconnect it to my pc?
    will it ever be read on my mac again?

    Jennifer,
    Welcome to the discussions. I'm not quite sure what happened here. However, I have a few questions. Currently, if you plug your iPod into your Mac, does it show up in iTunes? Have you run the latest iPod updater on your PC? Now, are both of your iTunes versions the same on Mac and PC?
    JC

  • Downloaded Firefox update for my Mac and now when I open it, there is a white box at the top of the page with a grey bar in it that I can't get rid of

    I updated my firefox browser for my Mac and now, when I open it, an empty white box appears at the top of the page with only a gray bar in it. It over lays the Firefox home page and I can't get rid of it, so I can't click on anything on the Firefox page. I tried deleting Firefox and redownloading it, but that didn't help. I have to force quite Firefox to get out of it. Help!

    hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • How do I make iCloud work between my Mac and my iPhone as suggested in the video's on Apple's website ?

    I'm trying to share a set of Numbers projects between my MacBook and my iPhone.
    I notice that iWork.com does NOT do what I am expecting from the Apple Video's : it only allows me to consult documents through Safari, but not to open one directly from iCloud.com in the appropriate app for editing ...
    Through file sharing in iTunes it seems to work for one of the projects ... but another project which has multiple tabs and rather long tables doesn't open on my iPhone due to "unknown error" ...
    Even then, the iTunes file sharing process can hardly be called seemless, and in no way even approaches what is suggested in the video's :
    The video's suggest that when working on a file on one device, then picking up another device the file will show the changes ...
    In reality here's what I have to do to make a change on the file on my Mac, share it with the iPhone, then change something on the iPhone and share it back with my Mac :
    1. save the changes to the document
    2. add the document to iTunes file sharing
    3. sync my iPhone
    4. open Numbers on my iPhone
    5. add the document from iTunes
    6. open it
    7. make a change
    8. sync the iPhone
    9. choose "save as ..." in iTunes to overwrite the copy on my Mac
    10. open the document in Numbers on the Mac
    Guess what ... when making a new change, I have to go back in iTunes, delete the link to the document and add the document again in order to be able to share the change ...
    I would expect the syncing with iTunes to at least take care of the file updating on the respective copies on Mac and iOS device ... apparently not so.
    Anyone knows how to really make Documents In The Cloud work ?

    Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
    and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
    What am I doing wrong ?

Maybe you are looking for

  • Vendor balance report

    Hi Everyone, My client has an requirement. When we are making Vendor invoice of 10000 and outgoing payment of 2000 have been made .Invendor report it should show as 2000 cleared item as it has been paid and 8000 as open item i have checked FBL1N its

  • Question about calling a function.

    Im trying to call a function when a button is clicked, im using actionlistner() on the button, which looks as so :- private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {                                                 jButton1ActionP

  • Problem Closing Applications

    I've just switched from PCs to mac and am running a brand new iMac. I've done the updates, purchased iWorks, Microsoft Office 2004 for Mac, and downloaded the latest drivers and software for my new HP printer. I've installed no other software at this

  • Report Previewer

    Hii, I have a require to modify a report layout. But in report i coulbn't see the layout of the report in layout model. Only i can see the output to run by Ctrl+R and the result display directly in Live previewer. How can solve it.??

  • Ecc 4.7 smartform table/template cell border thickness cannot be reduced

    Hi I am executing the SF_Example_01 and 02 and 03 and the table borders are not appearing properly. They look very thick and I could not figure out a way to reduce the thickness anywhere in table painter. I use sap version 4.7  and the printing devic