Update Photo Date

Just installed Elements 10. I am scanning old photos into Photoshop. When I go in and manually upate the photo date (instead of the default scan date), it appears to accept the change. When I pull the photo up again, the date is altered (e.g., from 1950 to 1949). If I pull it up yet again, the date chagnes yet again (e.g., from 1950 to 1949 to 1948).

I am having the same problem with Elements 10. I did not have this problem with previous versions of Photoshop Elements. I have tried online help, but they were not successful helping me either. I have tried changing the dates through photoshop Editor as well as in Elements, with no luck. Also I installed Lightroom 4.1, 64 bit. I love the program, but changes made there also do not stay with the date I give them. These last photos I scanned now show the date as 1/1/9999. I will be anxiously awaiting a fix for this problem. Another problem I am having is that once I have entered the organizer and closed the program, it apparently does not shut down. If I try entering the organizer again, I must either re-start my computer or first go to task manager and manually close the program there. I do not have the same problem with Elements Editor. I can access it multiple times with no problem.

Similar Messages

Updating photo dates back to 1920's

I use the "Adjust Date and Time" function to properly sort my scanned old family photos taken years ago. Many were taken as far back at 1901. Any date I change will not go back beyond the 1940's when I input the change, unless I change it a second time. For instance, a photo scanned in 2012, and adjusted to the date of the actual event, say, August 20, 1901, will actually change to December 15, 1944 (for example). Then when I change it a second time to the desired date, it works fine. Is there a way to do this in a single step?

Batch change seems to adjust the time better for larger time offsets. Try "Photos > Batch change > Date" instead.
Regards
Léonie

Why do my photo dates change she Facebook updates an album?

When I click on a FaceBook album in Aperture. The little clock thing goes around and around then when it is done all the photos in that album have a date of waht the current date/time is. It makes all them pics out of order when looking ato photos. I don't want this. I want the dates to remain the original. I have no way of knowing waht the original date and time was now! Very frustrating.

BTW, the title should be Why do my photo date's change when facebbok updates an album?

HT2638 Photo date update not effective

Dear all,
Last week, I updated my photos EXIF because the date were wrong (March 2012 instead of October 2013). I see in Aperture & in Finder that my photo & EXIF have been updated accordingly. They are all dated on October 2013.
I sync my iPhone with iTunes and here is the problem. Some photo remains dated on 2012... I think there is a Cache or something like that in iPhoto but I rebuilded 3 times my Library and the problem is still remaining...
I don't know what to do. I would really apreciate to have the right date on the photo. I'm making a world tour and that's all my memories
Regards,
Pierre

First thanks for anwsering,
This involve iPhoto '11 on OS X Mavericks (10.9.1).
I updated the dates through aperture with "Ajusting Date & Time" in the Metadata menu
In iPhoto & Aperture dates are updated as well as in Finder they all show photo dated in October 2013.
The issue only happen owhen I'm syncing my iPhone and my iPad.
Pierre

Script to update EXIF data in iPhoto '08

I shoot some photos with a digital Nikon D50, and some with a Leica M3 (35mm film). The pictures from the digital Nikon are encoded with plenty of detail in the EXIF tags, but the digitized images from the Leica and the 35mm film have only a few tags from the scanner.
I wanted a script that would update the desired EXIF tags direct in iPhoto. I looked around on the Internet at other scripts, and wrote a simple script to update a few EXIF tags on selected images in iPhoto.
I hope this script is of use to others.
http://movingtomac.blogspot.com/2008/07/script-to-update-exif-data-in-iphoto-08. html

since we don't have your tables or data, we can not run, test, or improve posted code.
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Problem updating photo library

I just upgraded my eMac to Leopard, and now am trying to upgrade it to iLife 08. It seems to go fine, but when I open iPhoto, it says it needs to "update photo library." I have about 9,000 photos. It runs for several hours, and the blue bar hits about 80% complete, and the screen says I have 44 minutes left, and it sticks there. For hours. Any suggestions on what I should do?
Jeff KC

Jeff
I am wondering if I should go in to my iPhoto Library and move most of the files to another location,
Under no circumstances should you do that - all that will achieve is corrupt your library.
Try Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums back.
Then try update that library.
Regards
TD

After 5.1 update photo sync problems

After I updated my iPhone 4S, iPad1 and iPad2 to IOS 5.1 I'm having problems syncing my photos. I also just bought a new iPad3 that came with IOS 5.1 installed and it has the same problems using iTunes to sync on my Windows 7 (64) PC. The problems are: not all photos sync into each album, many photos show up in the wrong album and several thumbnails don't match the photo displayed when I tap on it. Their are two common denominators: my PC running the latest iTunes (version 10.6.0.40) and all my devices running IOS 5.1. I've reported the iPad3 problem to Apple (case number 299629840) and the support tech and I have tried deleting the iPod photo cache, reloading the IOS software, etc. with no luck. The purpose of this post is to see if others are having the same problems with other devices on 5.1.

I am having a similar issue.
- iOS 5.1 on a 4S.
- Itunes 10.6.1
- Iphoto 9.2.3
With the 4S connected via wifi I select "Sync photos with" "selected albums..." I check one album only with four photos in it. Hit sync and the I watch the photos transfer in the top bar of itunes as it syncs. The orange status bar at the bottom goes up to show the photo data is on the 4S. I open the photo app on the 4S and the photos do not show up at all. No new album, no photos. The data appears to be there, but the 4S is not showing them.
I've tried deleted the ipod photo cache a few times and restoring. No change.

How to update the data in database in webdynpro

I have to update the data in databse table using adaptive rfc in WebDynPro

Hi,
You can refer to these links:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/faq%2b-%2bmodels%2b-%2badaptive%2brfc
Update data into SAP Table
http://help.sap.com/saphelp_nw70/helpdata/en/41/38bc8f813719488ddc9d9b21251ec3/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/d5/1558bfa6aa80499113983e738b1b21/frameset.htm
Regards
Inder

How to Update the data in R/3 From BW

Hi All ,
I Need some suggestion . i want to update the data of MARC table in R/3 from BW . Here data goes from BW to R/3 . so How to do this ? . There are no standard BAPI's in BW for this .
Thanks
Prithvi.

Hi,
The scenario you are explaining is little opposite to what happens generally. Are you sure, you want to update R/3 from BW?
If you have to update MARC table that means you have to extend the material for different plants. Try using BAPI_MATERIAL_SAVE_DATA.
Regards,
Ravi
Note : Please mark all the helpful answers

Unable to run bapis for project status update and date update together

Hi Experts,
I have a requirement to update the dates and status of a project WBS at level 4. I am trying to do update the CJ02 Transaction using standard BAPI available. I need to do both Date update and status update in the same LOOP PASS i am using the below mention bapi. when i am doing so i am getting an error Project 'A._____' has been currently processed by ID i.e. my id.
I have tried putting a wait for 2 seconds in the code but its still not working. please find the order below in which i am calling the bapi.
Loop at itab.
if date_changed = 'X'.
 CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
 READ TABLE it_error WITH KEY message_type = c_e.
 IF sy-subrc <> 0.
Commit
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 wait = c_x
 IMPORTING
 return = s_ret.
 endif.
endif.
if Status_change = 'X'.
 CALL FUNCTION 'BAPI_PS_INITIALIZATION' .
 CALL FUNCTION 'BAPI_BUS2054_SET_STATUS'
 READ TABLE t_result WITH KEY message_type = c_e.
 IF sy-subrc NE 0.
 CALL FUNCTION 'BAPI_PS_PRECOMMIT'
 TABLES
 et_return = t_ret.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 wait = c_x
 IMPORTING
 return = s_ret.
 ENDIF.
endif.
 WAIT UP TO 4 SECONDS.
endloop.

Try to use
SET UPDATE TASK LOCAL.
before each BAPI call.
Did you try to debug through your code, leaving sufficient time between BAPI calls? If it does work like that, then the above statement might help.

Updating array data in sql database

HI,
Im facing problems in updating array data in SQL database.
As of now, i am able to write an "insert" query and insert array data in an image datatype field. Im using image datatype because the array size is very big(around 80,000 x and y values).
Althoug inserting data is easy im unable to write a query to update this data.
Referring to the help of SQL server and Labview database connectivity toolkit, i came across a method of accessing image datatype....using textpointers, which are 16 bit binary values and using the WRITETEXT function instead of the UPDATE function.
but the problem im facing is that ive to pass the array as a 2d string array in the query as a result the updated array is retrieved in the form of a string a
nd not as an array. how do I get over this problem?

Hi Pavitra,
I'm not very clear on how you have inserted the data into your application, but I do know that when you call the UPDATETEXT or WRITETEXT function you use the TEXTPOINTERS to point to the first location of a 1d array. So, depending on how you've stored the data, you may have problems updating your data if you're looking at it as a 1d array instead of how you originally formatted it. If you are able to successfully access the data as a 1d array, you can use the database variant to data type vi and pass in a string array constant for the data type. This will convert the variant datatype into whatever you specify. You may have to index the row and column of the variant (you receive a 2d array of variant) first before you convert. If possible, can yo
u provide some more detail and maybe some example code of how you perform the insert and plan to do the update? I can probably give you a better solution if I know how you are formatting the data. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How to update the data in sqlserver table using procedure in biztalkserver

Hi,
Please can any one answer this below question
how to update the data in sqlserver table using procedure in biztalkserver
while am using executescalar,typedprocedure getting some warning
Warning:The adapter failed to transmit message going to send port "SendtoSql1" with URL "mssql://nal126//MU_Stage2?". It will be retransmitted after the retry interval specified for this Send Port. Details
Please send me asap....
Thanks...

Hi Messip,
A detailed error would have helped us to answer you more appropriately but
You can follow the post which has step by step instructions, to understand how to use Stored Procedure:
http://tech-findings.blogspot.in/2013/07/insert-records-in-sql-server-using-wcf.html
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
2013: Inserting RawXML (Whole Incoming XML Message) in SQL database

Is there a way of changing photos' dates all at once?

Hi,
I imported a number of photos taken within one week into iPhoto - some of them were assigned a wrong date by my camera which made the last photos the first ones in the folder.
I know I can change the photos' dates manually one by one, but is there any workaround to select multiple photos and change their dates simultaniously? I couldn't find any automator action...anybody who knows a hint?
Thanks
MacBook 2.0 GHz; 1,25 GB RAM; 60 GB HDD Mac OS X (10.4.8) iPhoto 06

Hi Terence,
thanks for the reply. It does work. Could have figured it out myself, I guess...but I always marked the photos and then tried to change their dates in this little information box in the lower left corner (which doesn't work).
Best regards
MacBook 2.0 GHz; 1,25 GB RAM; 60 GB HDD Mac OS X (10.4.8)

Can't update the data of my credit card

My credit card information was changed. Now I can't update this data on my account since days. Any idea, why? the error message is 'Card is invalid, please check card details'. thanks

Hi up1975.
Please contact our chat support: http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html#Contact_us as they can provide you personalised experience in getting your issue fixed.
Regards,
Romit Sinha

Update Photo Date

Similar Messages

Maybe you are looking for