Update problem auf ios5

Hi Versuche schon die ganze zeit Mein Iphone 4 auf das ios 5 zu updaten. Aber immer sagt itunes ab 400mb das ein fehler aufgetreten ist.
woran kann es liegen???

Als error schreibt itunes 3259

Similar Messages

  • Lenovo Lynx K3011 Update Probleme auf Win 8.1

    Hallo Ihr Lieben,
    ich hoffe auf Eure Hilfe.
    Ich habe seit ein paar Tagen das Lenovo Lynx K3011 und habe sämtliche Updates gemacht auf frischem Windows 8....
    Problem a: nach runterladen und installieren sämtlicher Updates ( um die 100 Stück) fällt er in eine Schleife und will sich wieder zurücksetzten...
    Das heißt es sind alle Updates weg...
    Problem B: somit bekomme ich Win 8.1 nicht installiert.
    Gibt es die Möglichkeit eines Clean Install oder habe ich eine andere Möglichkeit?
    LG
    Bettsy
    Gelöst!
    Gehe zu Lösung.

    Hallo zusammen,
    wir haben den Kollegen aus der Technik einen Reminder geschrieben und hoffen auf ein Feedback...
    Sobald wir was von den Kollegen hören, melden wir uns.
    Danke und Gruß, Marcel
    → Wenn Du eine Lösung auf Deine Frage erhalten hast, markiere diese bitte als gelöst - Hilfreiche Beiträge verdienen Kudos. Zögere nicht Kudos zu vergeben.   

  • Updating problem to ios5 in processing file

    i have a problem when i try to updating my iphone 4 to ios 5 afetr the downloading over goes to processing file then a massege popping up sayes (there was a problem downloading the software for the iphone "khalid" the network connection timed out. make sure your network settings are correct and your network connection is active . or try again later.)
    how i can solve these problem?
    NOT MY SOFETWAIR IS 4.3.4

    i have a problem when i try to updating my iphone 4 to ios 5 afetr the downloading over goes to processing file then a massege popping up sayes (there was a problem downloading the software for the iphone "khalid" the network connection timed out. make sure your network settings are correct and your network connection is active . or try again later.)
    how i can solve these problem?
    NOT MY SOFETWAIR IS 4.3.4

  • TS3694 hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regar

    hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards

    Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.

  • Nach dem update auf ios5

    Nach dem update auf ios5 sind auf dem Ipod meines Sohnes einige lieder die voher ok waren nicht mehr abspielbar. Wenn man die lieder aufruft kommen stattdessen  andere Lieder.

    After updating to IOS 6 neither AppStore nor ITunes Store are working properly, the Langugage is English even as the Country and Language settings are correct. Both stores are suddenly US so that you cannot apply any transaction. Before the stores were properly Austrian.
    When will this bug be fixed?????

  • Update auf ios5 nicht möglich

    hallo
    brauche dringend hilfe!! ich möchte mein iphone auf ios5 updaten. iin meinem iphone steht unter einstellung aber kein button softwareaktualiesierung, wieso nicht! bei sämtlichen beaknnten ist dieses hinterlegt. per itunes ist es aber auch nciht machbar. was muss ich tun? bitte um hilfe
    lg
    thomas

    Ich fand diese Website. Probieren Sie diese und sehen, ob diese von jedem hilft:
    http://www.apple.com/de/support/ipodtouch/assistant/itunes/
    Lassen Sie mich wissen ob das hilft

  • Has anyone had a problem downloading ios5 in itunes for windows 7

    has anyone had a problem downloading ios5 in itunes w/windows 7

    The error below wont let me authorize itunes, and iOS 5 install will not complete the update.
    "Not Found
    The requested URL/itunes/win/10.5/was not found on thisserver
    Apache/2.2.3 (oracle) Server at help.apple.com port 80"
    iTunes uninstall/re-install does not help.

  • Iphone keeps dipslaying no service after i updated it to ios5

    iphone keeps dipslaying no service after i updated it to ios5

    I may have found a solution! First, if you are having these problems, check the build of your iOS version. Go to Settings>General>About>Version. This should read 5.0.1 (9A405).
    Upon closer inspection of search engines, I came accross a website titled "What is the difference between iOS 5.0.1 build 9A405 and 9A406?". As it transpires, there's a great deal of difference, for us 4S users anyway.
    Here's the website (I hope I'm not breaking any rules by posting a link. Please let me know if I am!):
    http://www.iphonefaq.org/archives/971716
    The difference between these builds seems to be a fix for a problem in the iPhone 4S not recognising SIM cards. Apple's own knowledge base article states the following;
    "In certain situations, iPhone 4S may have difficulty recognizing a micro-SIM card, resulting in the following behaviors:
    "Invalid SIM" or "No SIM Card installed" alert appears intermittently.
    Status bar displays "No Service" or "Searching" in a location with good network coverage."
    Apparently, because this is a small fix for a small number of users, the fix has not been released as iOS 5.0.2. Therefore, people who updated to 5.0.1 early, such as myself, can't simply update by checking on iTunes or Software Update. In order to receive this newer build we have to restore the phone to factory settings, confirm the build has been updated to 9A406, then restore from a backup.
    I haven't attempted this yet as it may take some time, and I don't have enough until later in the week, but it anyone else tries this beforehand and finds it works, please let us know!

  • Update Problems with Agent 10.3.4

    we have a lot of various problems during the update of ZENworks Agent from 10.3.3 to 10.3.4 - on WinXP and Win7:
    Assigned the Update to 185 PCs: 77 not yet done, 102 successful but 10 failed with errors. Errors on different PCs are similar but not identical:
    All system-update.log and additional MSI logs showed different error messages, some PCs installed several other MSIs but had errors in several MSI logs
    And of course users could not work any longer since Icons on Desktop - from ZENworks are missing. So problem solved with manual Uninstall and Reinstall of agent. But we have another 300 PCs to upgrade, some of them are important ones. Another customer with 2000 PCs did NOT have so many problems.
    Error messages in German - Does anybody see similar events?
    PC1: Fehler bei der Installation von Paket novell-zenworks-usermanagement-10.3.4.13352.msi. MSI-Rckgabecode: -1. Weitere Informationen finden Sie im Systemaktualisierungsprotokoll (system-update.log) auf dem Gert.
    PC2: Fehler bei der Installation von Paket novell-zenworks-windows-desktop-10.3.4.13489.msi. MSI-Rckgabecode: -1. Weitere Informationen finden Sie im Systemaktualisierungsprotokoll (system-update.log) auf dem Gert.
    PC3: Fehler bei der Installation von Paket novell-zenworks-primary-agent-10.3.4.13645.msi. MSI-Rckgabecode: 1603. Weitere Informationen finden Sie im Systemaktualisierungsprotokoll (system-update.log) auf dem Gert.
    PC4: Beim Herunterladen der Aktualisierungsinhalte auf diesem Gert ist ein Fehler aufgetreten. Vergewissern Sie sich, dass auf diesem Gert gltige Inhaltsserver ber Regeln fr nchstgele-genen Server konfiguriert wurden und dass die Inhaltsreproduktion auf dem/den Inhaltsserver(n) dieses Gerts durchgefhrt wurde
    PC5: Beim Herunterladen der Aktualisierungsinhalte auf diesem Gert ist ein Fehler aufgetreten. Vergewissern Sie sich, dass auf diesem Gert gltige Inhaltsserver ber Regeln fr nchstgele-genen Server konfiguriert wurden und dass die Inhaltsreproduktion auf dem/den Inhaltsserver(n) dieses Gerts durchgefhrt wurde
    PC6: Fehler bei der Installation von Paket novell-zenworks-windows-desktop-10.3.4.13489.msi. MSI-Rckgabecode: 1603. Weitere Informationen finden Sie im Systemaktualisierungsprotokoll (system-update.log) auf dem Gert.
    PC7: Fehler bei der Installation von Paket novell-zenworks-auth-satellite-server-10.3.4.13646.msi. MSI-Rckgabecode: 1601. Weitere Informationen finden Sie im Systemaktualisierungsprotokoll (system-update.log) auf dem Gert.
    PC8: Fehler bei der Installation von Paket novell-zenworks-actions-10.3.4.13489.msi. MSI-Rckgabecode: 1601. Weitere Informationen finden Sie im Systemaktualisierungsprotokoll (system-update.log) auf dem Gert.

    Just an update:
    reapplying the update finally installs the new agent 10.3.4 - at least on most PCs.
    Only our helpdeskt complains about a lot of calls due to popup messages during the update - the update always continues - but users are worrrying. Here are entries in system-update.log:
    DEBUG;;;Attempting to stop service: Novell Identity Store
    DEBUG;;;stopping serviceNovell Identity Store
    DEBUG;;;Verifying the status for service: Novell Identity Store
    DEBUG;;;Unable to stop service Novell Identity Store. Der Vorgang wurde nicht abgeschlossen, da der Timeout abgelaufen ist.
    ERROR;ERROR_STOPPING_SERVICE_RETRY;Novell Identity Store,Der Vorgang wurde nicht abgeschlossen, da der Timeout abgelaufen ist.;
    DEBUG;;;Unable to stop service...will retry
    DEBUG;;;stopping serviceNovell Identity Store
    DEBUG;;;Unable to stop service Novell Identity Store. Der Dienst Novell Identity Store auf dem Computer . kann nicht beendet werden.
    ERROR;ERROR_STOPPING_SERVICE_RETRY;Novell Identity Store,Der Dienst Novell Identity Store auf dem Computer . kann nicht beendet werden.;
    DEBUG;;;Unable to stop service...will retry
    DEBUG;;;Verifying the status for service: Novell Identity Store
    DEBUG;;;Novell Identity Store stopped successfully
    That is really annoying for the users - and hotline

  • Can i bring back my iphones ios5.0.1 when i already updated it to ios5.1?

    can i bring back my iphones ios5.0.1 when i already updated it to ios5.1?

    No. You can not downgrade iOS.
    Why do you want to? Let's try to solve whatever problem you're having instead.
    If youre reason involves hacking or jailbreaking, you're out of luck.

  • HT4972 Update problem

    iPhone 4, trying to update it to ios5, computer says there's problem with firmwear and won't update... How do I fix this & update my phone?

    Reboot PC. Reset iPhone, by holding both Home and Power buttons together till Apple logo appears.
    Attempt update again.

  • Issues after updating iPhone3GS to iOS5 on TIM cellular data network (Italy)

    Hi everyone
    I have issues after updating iPhone3GS to iOS5 on TIM cellular data network.
    After installing iOS5 I had to switch from apn ibox.tim.it to wap.tim.it
    Since then the phone is unusable for any internet activity that is barely "data demanding" (e.g facebook app take literaly hours to update), everyting requires way to much time... the iPhone is not an iPhone anymore... it's worse than my blackberry with just GPRS on it.
    TIM technical support suggested me to switch back on apn ibox.tim.it, but then I would not be able to use internet tethering anymore (they say because of Apple iOS5) ... to bad I need internet tethering for work.
    I am seriously thinking to switch ISP or phone.
    Anyone did experience same problem / found a solution?

    Hi Raia.D,
    Welcome to the Support Communities!
    The first thing I would suggest is to restart your iPhone.  Then tap the Settings app, and you should see Cellular listed on the main settings screen.  You should see Airplane Mode, Wi-Fi, Bluetooth, and then Cellular.
    Here are some additional troubleshooting steps to try:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    - Judy

  • My iphone 3gs have a problom because i tryed to downloud apps from my computer without apple id so i tryed update it to ios5 when i made an apple id and the phone restarted dureing the update and i restored it but now i can not activate it why is that ???

    my iphone 3gs have a problom because i tryed to downloud apps from my computer with out apple id so some times it restart and the spring board always get crashed so now affter i made an apple id  i tryed to update it to ios5 but the phone restarted  in the middle of the update so restored the files from my computer but when i tryed to activeate the phone from wi fi it said activeate server is now unavilable and when i tryed to activeate it from itunes it told me there is no sim card why is that

    My phone is an iPhone 3gs too, and last night actually it said the same thing, "No Sim Card" and my friend and I started panicking but I did what I call a "Forced Reboot" where you hold down the Home and Power buttons until you see the apple logo. DO NOT RELEASE UNTIL THEN otherwise you are just shutting it down. So, I did that and it worked again....

  • Update problem - VBDATA table

    Dear All,
    We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
    Sometime the UPD and UP2 work processes hung without apparent reason.
    In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
    In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
    Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
    As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
    The Production and the Developer systems seem not affected by this problem.
    Have you got any idea about the reason of the problem?
    Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
    Thanks in advance,
    Federico Biavati
    My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

    Hello Siva,
    This is what I did:
    > Check how many entries do you have in VBDATA currently.
    More than 1.000 in every SAP systems that Iu2019m creating from Production
    > You might want to run the reorganize updates program to clear the old updates
    > that are pending/in error
    Good point!!
    After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
    Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
    Thanks for you help,
    Federico

  • Chart x scale update problem

    LabVIEW  8.5.1
    Sweep Chart Problem
    The x scale values do not update until after the 2nd sweep.  The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
    It appears to be a problem with the chart, since it happens with any vi with a sweep chart.  I've used versions 6 through 7 for years and never seen this.  I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
    I've included a simple example.
    Thanks much,
    JSC321
    Attachments:
    Chart Sweep Scale Update Problem.vi ‏32 KB

    You have a typical race condition!
    There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
    All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
    (Execution order is enforced even if the wire value is not even used inside the loop )
    Try it!
    Message Edited by altenbach on 12-23-2008 11:08 PM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    HistoryRace.png ‏10 KB

Maybe you are looking for